Whoever's reading this, i pray that whatever you're going through gets better and whatever you're struggling with or worrying about is going to be fine and that everyone has a fantastic day! Amen
the best part of this demonstration is that you picked up a manual lense for camera on a gimbal, also i don't recomend to buy this gimbal, it has x-axis issue that it doesn't hold well for long sessions.
thanks great video as always. I've wondered why gimbals don't have an electronic balance/level to display feedback to the user that they've hit the sweet spot?
If you have gone as far as you can go It's too far. Notice which direction your camera spins, If you move all the way forward the camera spins one way, all the way back It spins the other way. Find the middle.
For never having pieced together a gimbal, I didn't find a lot of this "simply". I kept trying to judge where the plates were being slid into and did I have them backwards? And this was only to 1:14 of the video. ☹ I'll find another video
Hi, i'm having trouble getting my Canon R6 to start recording via weebill 3 trigger. It does autofocus but not starting recording. Do u know or had any of this issue?
The balancing process looks as long and tedious as my DJI's. When are manufacturers going to create gimbals that don't require the endless trial and error process?
You may refer this camera and lens combo compatible list to check if your camera and lens in the list or not:zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20240304/1709535417584-mb4PTGCQ.pdf
hello friend! Please help me. I got the Weebill 3. I little sad. I can't connect it to my sony a7 III using cable. I want to control shutter, ISO, aperture using Weebill 3 and cable to sony. Maybe you have some tutorial? I also have Weebill S and there are no problem to connect and control camera by Weebill S. I need just one cable for it. Could i control ISO, aperture, shutter through connection by cable from weebill to sony ? And how to set up it ? I dont want to use Transmitter ((
HI. I am having a lot of trouble balancing a Sony A7r3 with 24-70 GM. After I balance the tilt, the camera doesn´t have enough clearance on the view finder. I don´t know what am I doing wrong. PLease help
I think you should remove the eyepiece cap, refer to the compatibility list of the Weebill 3, on page 32: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20230801/1690856783934-xMicxsW4.pdf
I'd love one of these gimbals but I doubt i'll buy one simply because I don't make money from my photography and so all the balancing would be irritating especially when you have to re-balance everything with each change of lens.
Hi, Manuela. When you adjust the pan axis, you need to lift the gimbal. If the arm is tilted up, you need to pull it back a bit, and vice versa, until it can stop in any position. 👍
Weebill-3 connect the Sony A6500, you need to use the Type-C to Multi USB cable to connect, then the camera USB connection must be PC remote. And turn on the gimbal first, then turn on the camera, the boot sequence is very important, and the camera must be M mode, live preview mode, and the lens is AF mode.
Hi does any body know how tochange the tilt controll which is in the front of zhiyun weebill 3s set by defualt in to tilt ,I want to chage it to zoom/focus mode. can any one help me ,please I just owned it this month .Thank tuy Tekeste
Scroll the Adjustment Wheel: Adjust parameters customized in the screen menu (aperture, shutter, ISO, digital focus/zoom, roll axis, tilt axis, pan axis).
This video makes no sense. You say to install the quick release plate (the long one) on the camera. Then the very next thing says there’s also this other release plate. And you show it connected to the camera in a completely different way. There’s no explanation
Whoever's reading this, i pray that whatever you're going through gets better and whatever you're struggling with or worrying about is going to be fine and that everyone has a fantastic day! Amen
Great info
the best part of this demonstration is that you picked up a manual lense for camera on a gimbal, also i don't recomend to buy this gimbal, it has x-axis issue that it doesn't hold well for long sessions.
Excellent tutorial; I’m about to send back my Weebill S and get this one instead.
Great tutorial, thanks!
thanks great video as always. I've wondered why gimbals don't have an electronic balance/level to display feedback to the user that they've hit the sweet spot?
What can I do if pan adjustment is as far as it goes and it still keeps moving when I tilt it?
If you have gone as far as you can go It's too far. Notice which direction your camera spins, If you move all the way forward the camera spins one way, all the way back It spins the other way. Find the middle.
For never having pieced together a gimbal, I didn't find a lot of this "simply". I kept trying to judge where the plates were being slid into and did I have them backwards? And this was only to 1:14 of the video. ☹ I'll find another video
You may refer the user guide: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20231229/1703837987497-rK3fnYRX.pdf
Hi, i'm having trouble getting my Canon R6 to start recording via weebill 3 trigger. It does autofocus but not starting recording. Do u know or had any of this issue?
same issue here, still don't know what to do.
@@jessiecobangbang4106 try to press the recording button for a bit long time.
The balancing process looks as long and tedious as my DJI's. When are manufacturers going to create gimbals that don't require the endless trial and error process?
I don't believe that is possible. The balance point of the camera can not be predicted.
thanks for the great tutorial. i'm have issues connecting to the bluetooth app to upgrade the firmware. I'm on an IOS.
Could you please make a video for vertical alignment, because for me it doesn't work..... My camera is Nikon Z6 I , thanks
You may refer this camera and lens combo compatible list to check if your camera and lens in the list or not:zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20240304/1709535417584-mb4PTGCQ.pdf
hello friend! Please help me. I got the Weebill 3. I little sad. I can't connect it to my sony a7 III using cable. I want to control shutter, ISO, aperture using Weebill 3 and cable to sony. Maybe you have some tutorial? I also have Weebill S and there are no problem to connect and control camera by Weebill S. I need just one cable for it. Could i control ISO, aperture, shutter through connection by cable from weebill to sony ? And how to set up it ? I dont want to use Transmitter ((
HI. I am having a lot of trouble balancing a Sony A7r3 with 24-70 GM. After I balance the tilt, the camera doesn´t have enough clearance on the view finder. I don´t know what am I doing wrong. PLease help
I think you should remove the eyepiece cap, refer to the compatibility list of the Weebill 3, on page 32: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20230801/1690856783934-xMicxsW4.pdf
I"m getting "Function suspended, please use PC tool to upgrade" but I'm on a mac and I'm getting this error on my iPhone.
I'd love one of these gimbals but I doubt i'll buy one simply because I don't make money from my photography and so all the balancing would be irritating especially when you have to re-balance everything with each change of lens.
Is the battery interchangeable?
Weebill-3 is the built-in battery. Unless it's broken, you don't need to replace it
@@hebehe462 hey do you know why my gimbal won’t charge?
Are there any more tips for adjusting the pan axis? I can't find that sweet spot that keeps my gimbal balanced when I tilt it left and right 😪😪😪
Hi, Manuela. When you adjust the pan axis, you need to lift the gimbal. If the arm is tilted up, you need to pull it back a bit, and vice versa, until it can stop in any position. 👍
can t connect my sony a6500 to start the record, can u help me?
Weebill-3 connect the Sony A6500, you need to use the Type-C to Multi USB cable to connect, then the camera USB connection must be PC remote.
And turn on the gimbal first, then turn on the camera, the boot sequence is very important, and the camera must be M mode, live preview mode, and the lens is AF mode.
Hi does any body know how tochange the tilt controll which is in the front of zhiyun weebill 3s set by defualt in to tilt ,I want to chage it to zoom/focus mode. can any one help me ,please I just owned it this month .Thank tuy Tekeste
Scroll the Adjustment Wheel: Adjust parameters customized in the screen menu (aperture, shutter, ISO, digital focus/zoom, roll axis, tilt axis, pan axis).
I did not get the wrist rest and sling arm included. Do you have to buy it separately?
That's the difference between the Standard and the Combo. You can contact the seller to get it if you need.
Very dark lighting, difficult to see
Is it just me or does that camera look like its being slammed around.
This video makes no sense. You say to install the quick release plate (the long one) on the camera. Then the very next thing says there’s also this other release plate. And you show it connected to the camera in a completely different way. There’s no explanation
i need to change the language to English
It's in the menu of the gimbal's screen. reach to the bottom you can see this "语言",enter in to choose Engligh.
Thompson Sharon Walker Cynthia Clark Ruth
Video is too dark man smh
god this tutorial is so non descriptive