Double press the Mode button (M) and you will see the P (portrait Mode) that allows you to record on vertical after the Vortex mode. Idk if this answer is still being useful to you but hope anyone find it useful anyways, i had the same doubt about it :)
Hi Praveen, you could first switch the gimbal mode to V mode, and then press the fill light control wheel to enter the V Mode Setting menu to adjust parameters.
I received mine few days ago and after upgrading the software I can no longer connect my camera to the gimbal and I tried with many différent cables it wont work. Also the quick systeme release tend to loose even when I firmly lock it. You should have a quick release system similar to the one from ulanzi plus you should release a Backpack strap clip. Also when adjusting the plate up and down you need to unscrew the little screw but even loosen up it is hard to move up or down and when you manage to do it, it scratch the all rails. The portrait mode works whenever it wants to 💁♂️
Hi there! We are sorry for the inconvenience caused! Please contact the seller to apply for a replacement. Please let us know if you have any other questions. We'd love to help, just feel free to DM me here: m.me/officialzhiyunsupport
hey, i was trying to change the speed of the roll axis in the pov mode. it's way to slow for me, I wanted to make it faster for more dynamic dancefloor footage on wedding days, but no matter what parameter i set it on, the speed doesen't change what so ever. can you tell me how to change it for pov mode?
Hi Bjorn. Please set the speed of roll axis in the menu of Weebill 3. After adjusting the parameters, please click menu button to save. Please let us know if you have any other questions. We'd love to help, just feel free to DM me here: m.me/officialzhiyunsupport
@@ZhiyunTechGlobal it doesent work. no matter what settings i put into the speed parameters of the roll axis, it just doesen't change anything in the pov mode. the other axis work perfectly fine. it must be a back in the firmware, please adress it.
Hi when the cable connecting gimbal and camera are connected, and at the same time atomos is connected to the camera, you will not even be able to see the images through the atomos monitor. to be able to see the images via atomos you have to disconnect the gimbal cable from the Sony. doing so, of course, you will lose the ability to control iso, shutter and iris and rec via gimbal Is there a new gimbal that gives you the ability to control all of this and use atomos at the same time? this check was done on a zhiyun crane 2 from a few years ago. I wonder if there is the possibility to connect the atomos ninva V to the camera, and the camera to the gimbal, without losing the ability to control shutter, iso, aperture and rec. I don't know, maybe with the new gimbals it can also be done via bluetooth. I know that the limit of the management of these functions could also be the sony a 7iii. Could you help me in this problem? Could you suggest me a gimbal that gives me the possibility to do all this? Thank you
Hi Zhiyun, I know you have already a new version (3s) but nevertheless I decided to buy this "old" version to work with my Nikon Z6 I, and everything is fine except the connection between camera and your gimbal. For some reason, when I use USB-C and USB-C connection, the "rec" button won't work. I haven't find any decent explanation how to do this. Is there any "quick manual" or video like this one? Thanks in advance
Great video but never explained if you can shoot vertically or need a plate
Double press the Mode button (M) and you will see the P (portrait Mode) that allows you to record on vertical after the Vortex mode. Idk if this answer is still being useful to you but hope anyone find it useful anyways, i had the same doubt about it :)
Looks like quite an amazing gimble.Ive never used one, so looking forward to the experience!
Just what i need. Loving my crane m3
Love this guy
Good stuff, TY!
what kind of camera n set up do you have it looks amazing
Can you do a video how to connect a pz lense and the set up thanks so you can zoom on the weebil 3
How to shoot portrait mode ?!!!
do you have a video that shows how to use the camera control features such as iso, aperture, and shutter speed?
Some I’m not able to do 360* with Vortex mode .
Also can make a video on setting weebill 3
Hi Praveen, you could first switch the gimbal mode to V mode, and then press the fill light control wheel to enter the V Mode Setting menu to adjust parameters.
I received mine few days ago and after upgrading the software I can no longer connect my camera to the gimbal and I tried with many différent cables it wont work. Also the quick systeme release tend to loose even when I firmly lock it.
You should have a quick release system similar to the one from ulanzi plus you should release a Backpack strap clip.
Also when adjusting the plate up and down you need to unscrew the little screw but even loosen up it is hard to move up or down and when you manage to do it, it scratch the all rails.
The portrait mode works whenever it wants to 💁♂️
Hi there! We are sorry for the inconvenience caused! Please contact the seller to apply for a replacement.
Please let us know if you have any other questions. We'd love to help, just feel free to DM me here: m.me/officialzhiyunsupport
hey, i was trying to change the speed of the roll axis in the pov mode. it's way to slow for me, I wanted to make it faster for more dynamic dancefloor footage on wedding days, but no matter what parameter i set it on, the speed doesen't change what so ever. can you tell me how to change it for pov mode?
me too , any solution?
@@TheManto1980 no solution so far
Hi Bjorn. Please set the speed of roll axis in the menu of Weebill 3. After adjusting the parameters, please click menu button to save.
Please let us know if you have any other questions. We'd love to help, just feel free to DM me here: m.me/officialzhiyunsupport
@@ZhiyunTechGlobal it doesent work. no matter what settings i put into the speed parameters of the roll axis, it just doesen't change anything in the pov mode. the other axis work perfectly fine. it must be a back in the firmware, please adress it.
me, too 😂
That's it have Portrait mode ?
do you have changed the motor speed to be smoother
Hi
when the cable connecting gimbal and camera are connected, and at the same time atomos is connected to the camera, you will not even be able to see the images through the atomos monitor. to be able to see the images via atomos you have to disconnect the gimbal cable from the Sony. doing so, of course, you will lose the ability to control iso, shutter and iris and rec via gimbal Is there a new gimbal that gives you the ability to control all of this and use atomos at the same time?
this check was done on a zhiyun crane 2 from a few years ago.
I wonder if there is the possibility to connect the atomos ninva V to the camera, and the camera to the gimbal, without losing the ability to control shutter, iso, aperture and rec.
I don't know, maybe with the new gimbals it can also be done via bluetooth.
I know that the limit of the management of these functions could also be the sony a 7iii.
Could you help me in this problem?
Could you suggest me a gimbal that gives me the possibility to do all this?
Thank you
Portrait mode?
В другом видео на этот же стедик он рекомендует другие настройки... ну вы поняли
Hi Zhiyun, I know you have already a new version (3s) but nevertheless I decided to buy this "old" version to work with my Nikon Z6 I, and everything is fine except the connection between camera and your gimbal. For some reason, when I use USB-C and USB-C connection, the "rec" button won't work.
I haven't find any decent explanation how to do this. Is there any "quick manual" or video like this one?
Thanks in advance
You may try press the record button a little harder and deeper, if you half press the button, it will active AF only not to record.
How to fix the axis lock issue!!! My weebill 3 sucks! I can’t even use it
Can I use this with a Sony 4K camcorder
There maybe has a balancing problem with it.
❤️👏🇩🇿
How to install camera in it?!?! most important thing to know and you didnt even said a word about it...
Hernandez Brenda White Larry Lopez Kevin
PORTRAIT MODE?
Yes, it supports the portrait mode.
@@ZhiyunTechGlobal Thank you, I just bought mine
@@gustaconradohow does it support portrait mode...am about to buy it but it seems only the weebil s3 can does ur weebill 3 do portrait mode
very bad ZHIYUN WEEBILL 3 gimble _ sony m3 not working control iso,shutter-and
very hard to learn. You should improve your User friendly experience...honestly i don't understand.
Portrait mode ?