Hi Mamo good to see you again . i took your Udemy course it actually helps me a lot. this course is also good tutorial for users of Zhiyun 3s . but unfortunately I bought Dji Rs 3, it actually good gimbal but there aren't enough courses so i wish maybe you will update a tutorial course of DJI RS 3 for beginners .
Hello. Thanks for joining my Udemy course, hope it helped. I do no jave partnerships with DJI so I find it more difficult to review for them. Stay tuned anyway. Ciao
This is my first gimbal and admittedly I watched this video probably 10 times just to finally understand it all. Thank you for taking the time to make such a clear walk-through for all us folks at home! I wish there was a short tutorial on understanding the customizations to the values for panning, tilting etc. Thanks again!!
Great video, was able to assemble it properly. Do you know any carry case for this? I bought the combo pack as well, but the backpack is unusable. Any advice is appreciated.
@@MamoAir already subscribed. Btw, i had to contact Zhiyun because pressing the shutter button didn't start recording. Apparently the button has to be firmly pressed and a bit deeper. Wanted to share that information.
when you have it on pov mode for examble , can you push the trigger button to switch to lock mode for the time that you pushing it , and when releasing it, the trigger button ,can came back at pov mode again autocaticaly ?? You know , for use lock mode just for some seconds and going back at main selected mode instantly ,like Dji s gimbals ... Weebill s doent doing that and i sold it for that !
at 11:03 When you say find the spot that it stays there... I can't find a spot like that- it always flips forward. Do you know what is wrong? Thank you!
Hello. Thanks for checking the video. If the camera titls forward you have to slide it towards the back of the plate a tiny bit and possobly also lift the side arm a bit lower. I cannot really help without having the gimbal here.. Subscribe for more and join my community. Thanks
Thanks for the very informative video. I replaced my crane M3 with weebil 3s and was having trouble figuring out how to set it up, but now I have a solution. I am a Japanese who is not very good at English, but your pronunciation was very easy to listen to and understand. Thank you for your high quality instructional videos.
Hello, do you know of any accessories for attaching an external monitor to the Zhiyun WEEBILL 3S? Also, I want to work with a Follow Focus, but I can't find a suitable model.
Hi there. You can use any clamp with magic arm attached or you can check this gimbal ua-cam.com/video/FTeoOxvHnOw/v-deo.html Hope it helps. Subscribe and join my community. Ciao
Greetings, Does anyone out there have experience with the VC100-Sony FX3 camera function controls? I am hoping the VC100 will control the Weeblii 3s and Sony FX3 via AI Transmitter while the camera rig is mounted to the bumper and the camera operator stationed inside of the vehicle.
Really loved the presentation and information and effort you have put in to make the video. Thinking of buying the 3s. However I have a fujixs20 and a sirui 35mm anamorphic lens which is manual lens My question is : How can i pair focus puller with gimbal without interfering with camera and gimbal connection .
nice review! I don't understand why the weebill 3s start to be a powerbank to my camera sony a7s3 when battery is low... how can i change this setting?
This was a great video! Even tho I don't have an excellent english, thank you! I have a question, can I use any lens if my camera is compatible with the gimbal? like a 18-55mm or a 50mm (canon)
Hello there. Glad I could help. Subscribe and join my community. About the lenses, it depends on their weight and shape. Check the zhiyun website fo compatibility or send them an email. Ciao
Thank you from germany. I've seen this tutorial just before i buy this gimbal for to use it with my Lumix s5 camera. The sling is what i love, gives me more stability. One point i don' t like much is the only chinese or english version,because for me it' s not so easy to understand all advices. Better solution has the DJI rs3mini, it " speaks" german. But in my home country zhiyun is much cheaper so i try to complete my bad english...😊
Hi, thanks a lot for this great video? For me it´s the first time using a gimbal so your tutorial was extremely helpful! One question about 10:15: Why is it necessary to slide the camera against the side motor?
Hello. Thanks for the message. I place the camera next to the motor because it's a way to keep the whole setup closer to the center of gravity. Hope ut helps. Subscribe and join my community. Ciao
Thank you very much for the tutorial. You are amazing. The way of presentation, the detailing, and straight to the points without unnecessary bgm or irrelevant subjects. Appreciate it.
@@MamoAir hello.. sure I’ll subscribe.. I also saw your weebill 3E tutorial. Now that you have used both the gimbals, can you tell which one give better performance in stabilisation..??
Hello my friend thanks for the video! I have a question. I use a A7IV + sigma 24-70mm 2.8+ small rig cage. Do I just need to balance it and then auto tune, or do I also need to select the "motor level" to "high" since it is a heavy setup? Thanks for the help!
Hello there. This are things you can try for each setup. If itnis too heavy try with the strong motor. Hope it helps. Subscribe and join my community. Ciao
@@MamoAir i have a question. Im having trouble with stabilizing in portait mode! When i get to on axis its cool when i place my camera upwards but after that i cant get it to get stabilized :( its like something blocks it
Busqué este video en español pero está tan bien hecho que pude entenderlo en inglés sin ningún problema, y me ayudó bastante a usar mi primer gimbal. Muchas graciassss, saludos desde Perú
This was the video I was looking for! Straight to the point, easily explained, and simple steps. In the end, it worked! My Weebill S3 gimbal is working! Thank you so much. You sir have just earned a subscriber
Greetings, me again. I had a question: I started using my gimbal in L mode, and after about 10-20 of seconds using it, it beeps a few times and says Axis Lock on the small screen with a lock symbol. And then it stops balancing my Canon EOS R 50mm. Do you know what this means? Is there a way to avoid it? I found that the only way to get rid of it is to turn off and turn on the gimbal again. Also for some reason, on my gimbal screen, the mode is written much smaller. In your video its right in the center with big letters but in mine its on the top left corner and in the center of the screen it says Av N/A. I have no idea what those mean.
@@berkkarsi hi there. Usually when that happens is because one of your axis is actually locked. Make sure you unlock all the motors. Another reason may be because your camera is not properly balanced or it is just too heavy for this gimbal. Hope it helps. Ciao
What parameters do you recommend for taking videos of walking in the city? I tried a lot, but something just doesn't work. I use F mode. Follows hand right and left too fast and I have to manually adjust up and down, camera doesn't follow hand
At 15:18 you point to a clamp that for vertical tightening, tha freely spins for you. However mine does not freely spin. It hits the main long plate... and I cant work out why. We have the exact same equipment, fitted the same way. The only way I can spin the vertical clamp to loosen it, is to move it all the way up the top of the plate. Any else has this issue?
Brand new to video and just bought the Weebill 3S. This was a great tutorial! Thank you so much for putting it together. I don't know what I would have done had I not found you!
Thank you so much for the video! I do have one question. I would like to use the Shutter button on my Weebil 3S to start and stop recording on my Sony A6700. I have connected my camera through Bluetooth to the gimbal, but the shutter button on the gimbal is not controlling the shutter on the camera. Instead, it looks like it is controlling the focus of my camera. Do you know how I can change this option?
Hi, thanks for the comment. The gimbal helps to stabilise the image a bit, then you also have to apply some skills, also in walking. I mever have the perfect shot. Something that does not work for me is to use a gimbal and keep the stabilisation of the camera on too. May be give it a try. Subscribe and join my community. Ciao
i have a question look that the camera is using the batery anyways if it says conected and in the icon of the batery of the camera is with a plug at his side. there something im doing wrong ? i put the same configuration that you show in the video
5 місяців тому
Merhabalar fujifilm xs10 ile uyumlu mudur acaba öğrenebilir miym
Ciao Mariano, premetto sono un fotografo e non un video maker , ma a volte mi piace fare piccole interviste o video che fino ad ora ho fatto con una Insta360 ace pro. Mi piacerebbe fare ora un passo avanti usando la mia Fuji xt4 o là mio nikon 850 per fare qualcosa di più professionale, usando un gimbal . A questo punto un tuo piccolo consiglio, compreresti il weebill 3s o il nuovo cinepeer 3e? La differenza di prezzo non è poi tanto tra i due cosa faresti?
Ciao Alberto, grazie del messaggio. Allora, ho lanciato proprio ieri un tutorial anche per il Weebill 3E. Non ricordo di preciso le dimensione del 3S ma il 3E mi sembra più portatile. Secondo me come prestazioni son buoni entrambi, dipendentemente anche da che camera e lenti usi. Se vai per portabilità, prendi il 3E. Il 3S ha però più accessori come la maniglia e l'appoggia polso. Valuta queste cose. Spero ti aiuti. Iscriviti. Ciao
Caro Mariano sono già iscritto da anni al tuo canale e devo a te come utilizzare un crane due con una go pro. Del weebill 3 s , mi pigliava il fatto che avesse anche una luce incorporata, tu l’hai mai usata?
@@AlbertoBortoluzzi le luci su questi gimbal al momento non sono potenti. Sono da usare in ambienti scuri, certamente non alla luce del sole e la userei solo quando faccio vlog, sulla mia faccia. Per interviste ad altre persone bisogna essere abbastanza vicini al soggetto o non servono a molto
Thank you very much for your very detailed video. I just purchased my Zhiyun Weebill 3S gimbal. Thanks to your video I feel more confident decision purchasing this product. I can't wait to view more of your videos.
record button on weebill 3s not working with Sony alpa7R 4A. If I press record from the app it's ok. If I press record button of the weebill 3s it functions as AF-ON button on my camera. The Camera is connected to the weebill 3s with USB to multi cable. Can anyone help me pls to solve this issue?
You showed the wheel rolling gimbal and said that it is customizable. Wheel on my gimbal doesn't roll, probably I made some changes mistakenly. What can reset the wheel function to restore?
very complet . i saw lot of tutorias and they dont explain as much as you . i just get the gymbal and follow all your instructions steep by steep and works great ! Thanks bro ! Saludos desde argentina , el culo del mundo. ! VLLC !!!
Hi, thanks for this video. Have you found a way to disable joystick panning at all? I like tilting using joystick but not panning. This used to be the case with older gimbals. Thanks!
Hello there. Sorry I have not tried to do so on my gimbal. Try to get in touch with the support team from Zhiyun. Subscribe and join my community. Ciao
Literally, nothing is on the gimbal yet I have everything on the camera body and I'm just trying to get the gimbal to hold it balancing position, but I turn it on. It tries to stand up collapses and gives Axis Lock.. I'm doing something wrong or something is faulty. Either way I'm about 15 minutes from tossing this out the window to the the next sad videographer to figure out because what the fuck??
Hi. You cannot change the battery. The battery us built in and you will have tobsend it back to the support team if something goes wrong with it. Hope it helps. Subscribe and join my community. Ciao
I just bought this Gimbal and the camera slips down. The Left main balancing arm tensioner lock is not holding the camera payload (A7RV and PZ1635 F4). The camera just drifts downward and then the balance is messed up. Even when I firmly tighten the lever lock it will continue to drift down when using.
Please help when I connect it with my sony a7iii with wire or wireless and while I hit record on my gimbal it only focusing but not recording... pls guide mr
Please use Type-C to Multi USB (LN-UCUS-A03) cable. 1. Please select "PC Remote" for your camera's "USB Connection". 2. If using electronic focusing, set the "zoom setting" into "on: Digital zoom" in the menu and set the photo format into "JPEG". 3. For Sony cameras, after connecting stabilizer and camera with control cable, power on the stabilizer and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the stabilizer when used with motorized lens. Digital zoom control is available on the stabilizer when used with nonmotorized lens. Please select zoom option in your camera's settings. 4. When shooting Panorama or Timelapse, it is recommended to turn off the Sony camera's auto review.
@@zhiyunsupportglobal706when i press record button it starts focusing on both my cameras sony a7siii and sony a7iii only i can control iso with wheel with cable and Bluetooth, I tried the solution you mention but nothing happen
@zhiyun give this man a check he’s the only one on UA-cam with this tutorial! Helped me a lot
Hello there. Thanks for the comment ahah. I hope the video helped. Hit susbscribe then and join my community. Ciao
For me it was the video that make easier my decision 🎉❤
I’ve watched 6 times 😅
@@imdavemtz Thanks for the commnet, glad I could help. Subscribe and join my community. Ciao
@@imdavemtz ahah, awesome
THIS is the instruction book that should have been included with the gimbal! Watch BEFORE you start playing with it.
Hello. Thanks. I am glad I could help. Subscribe and join my community. Ciao
Thanks a lot. They were very helpful in understanding the new device!
Hi. Great, happy I could help. Subscribe and join my community
Thank you so much! You gained a new subscriber and I dropped my like! 👏🏻
Hello. Glad I could help and thanks for the subscription. Stay tuned
Muuuuy completo, muchas gracias por la ayuda❤❤
Thanks for the message. Glad you enjoyed the video. Subscribe and join my community. Ciao
Man literally u came in the perfect time thank you so much 🙏🏽
I guess you cane to watch when you most needed ut ahah. I am glad I could help. Subscribe and join my community. Ciao
I just ordered this gimbal and it’ll be here this week! I was pretty excited, but your video just made me SUPER STOKED! Thank you! 🙌🏼🙌🏼🙌🏼
Hello. Thanks for the comment. Glad you enjoyed the video. Subscribe and join my community. Enjoy the gimbal. It is good!
Thank you! I just subscribed and I’ll be referring to your channel and this video regularly! :))
@@adphotojon awesome
How'd it go? I've never used one and I'm thinking of buying this one. It looks pretty amazing
Hi Mamo good to see you again . i took your Udemy course it actually helps me a lot. this course is also good tutorial for users of Zhiyun 3s . but unfortunately I bought Dji Rs 3, it actually good gimbal but there aren't enough courses so i wish maybe you will update a tutorial course of DJI RS 3 for beginners .
Hello. Thanks for joining my Udemy course, hope it helped. I do no jave partnerships with DJI so I find it more difficult to review for them. Stay tuned anyway. Ciao
You are the best, thank you so much, you made the best tutorial of Weebill 3 s!
Hi there. Thanks for the message. I am glad I could help. Subscribe and join my community
This is my first gimbal and admittedly I watched this video probably 10 times just to finally understand it all. Thank you for taking the time to make such a clear walk-through for all us folks at home! I wish there was a short tutorial on understanding the customizations to the values for panning, tilting etc. Thanks again!!
Hi Jay. Thanks for the comment. Glad I could help. Subscribe and join my community. Ciao
Does it come with active tracking?
Great video, was able to assemble it properly. Do you know any carry case for this? I bought the combo pack as well, but the backpack is unusable. Any advice is appreciated.
Awesome tutorial.
Hello and thanks for the comment. Glad I could help. Sunscribe to the channel then ans join my community. Stay tuned. Ciao
@@MamoAir already subscribed. Btw, i had to contact Zhiyun because pressing the shutter button didn't start recording. Apparently the button has to be firmly pressed and a bit deeper. Wanted to share that information.
Great video. How do you store this in a bag? What bag? Thank you
Hi. Thanks. You store the gimbal in its case. Hope it helps. Subscribe and join my community. Ciao
when you have it on pov mode for examble , can you push the trigger button to switch to lock mode for the time that you pushing it ,
and when releasing it, the trigger button ,can came back at pov mode again autocaticaly ??
You know , for use lock mode just for some seconds and going back at main selected mode instantly ,like Dji s gimbals ...
Weebill s doent doing that and i sold it for that !
Great video and very helpful ❤
Great! Subscribe and join my community
I can’t say thank you enough this is my first gimbal and I would have never in 1000 years figured it out by myself
Hello! I am happy I could help. Subscribe and join my community. Ciao
at 11:03 When you say find the spot that it stays there... I can't find a spot like that- it always flips forward. Do you know what is wrong? Thank you!
Hello. Thanks for checking the video. If the camera titls forward you have to slide it towards the back of the plate a tiny bit and possobly also lift the side arm a bit lower. I cannot really help without having the gimbal here.. Subscribe for more and join my community. Thanks
Thanks for the very informative video.
I replaced my crane M3 with weebil 3s and was having trouble figuring out how to set it up, but now I have a solution.
I am a Japanese who is not very good at English, but your pronunciation was very easy to listen to and understand.
Thank you for your high quality instructional videos.
Hello. Arigatou gozaimasu! I love Japan. Thanks for the comment, I hope I could help. Subscribe and join my community. Jamata!
Hello, do you know of any accessories for attaching an external monitor to the Zhiyun WEEBILL 3S?
Also, I want to work with a Follow Focus, but I can't find a suitable model.
Hi there. You can use any clamp with magic arm attached or you can check this gimbal ua-cam.com/video/FTeoOxvHnOw/v-deo.html
Hope it helps. Subscribe and join my community. Ciao
Greetings,
Does anyone out there have experience with the VC100-Sony FX3 camera function controls? I am hoping the VC100 will control the Weeblii 3s and Sony FX3 via AI Transmitter while the camera rig is mounted to the bumper and the camera operator stationed inside of the vehicle.
Pretty good tutorial!!
Thanks!
Really loved the presentation and information and effort you have put in to make the video.
Thinking of buying the 3s.
However
I have a fujixs20 and a sirui 35mm anamorphic lens which is manual lens
My question is :
How can i pair focus puller with gimbal without interfering with camera and gimbal connection .
Hi! We have not tested the gimbal with the focus puller, there may be compatibility issues. 🥺
nice review! I don't understand why the weebill 3s start to be a powerbank to my camera sony a7s3 when battery is low... how can i change this setting?
Did you try the cable Type-C to Multi USB LN-UCUS-A03 or Type-C to Type-C USB LN-UCUC-A02?
have the same problem , my camera is not charching wile im using it
@@HellenLee-yz2oj have the same problem , my camera is not charching wile im using it
@@fotoyvideorosario Which item camera and which item cable you connect?
This was a great video! Even tho I don't have an excellent english, thank you!
I have a question, can I use any lens if my camera is compatible with the gimbal? like a 18-55mm or a 50mm (canon)
Hello there. Glad I could help. Subscribe and join my community. About the lenses, it depends on their weight and shape. Check the zhiyun website fo compatibility or send them an email. Ciao
Thanks for the super helpful tutorial. Is it normal to have the motor clicking/jittery when it pans left or right past the default position?
Hi there. The gimbal should not shake. Make sure the camera is properly balanced on it as that may cause the clicking
Thank you from germany. I've seen this tutorial just before i buy this gimbal for to use it with my Lumix s5 camera. The sling is what i love, gives me more stability. One point i don' t like much is the only chinese or english version,because for me it' s not so easy to understand all advices. Better solution has the DJI rs3mini, it " speaks" german. But in my home country zhiyun is much cheaper so i try to complete my bad english...😊
Thanks for the message. Hope it helped. Subscribe and join my communitu. Ciao
Hi, thanks a lot for this great video? For me it´s the first time using a gimbal so your tutorial was extremely helpful! One question about 10:15: Why is it necessary to slide the camera against the side motor?
Hello. Thanks for the message. I place the camera next to the motor because it's a way to keep the whole setup closer to the center of gravity. Hope ut helps. Subscribe and join my community. Ciao
Thank you very much for the tutorial. You are amazing. The way of presentation, the detailing, and straight to the points without unnecessary bgm or irrelevant subjects. Appreciate it.
Hello there.
Hope this helped. Subscribe and join my community. Ciao
Perfect video!! Thanks from
Australia 🇦🇺 ❤❤
Hi Daniel. Glad I could help. Subscribe and join my community. Ciao
Amazing tutorial, great explanation, thanks Mamo Air!
Thanks. I hope the video helped. Subscribe and join my community. Ciao
Do you have a video about the "Transmount video transmission transmitter" that comes included in the kit, is very complex to use .
Hi there. Sorry I do not have such a video
LUMIX S5 not connecting to Weebill 3S Bluetooth any solution plz help
Hello there. I recommend to get in touch with the brand. Subscribe and join my community. Ciao
Obrigado por esse tutorial! Me ajudou em duvidas pontuais que eu tinha a respeito desse gimbal!! Sucesso ao seu canal!
Hello. I hope the video helped. Subscribe and join my community. Ciao
very nice and in-depth tutorial. can we just attach the wrist rest and not side handle..??
Hello there. Thanks for the comment. Yes you can only artach the wrist rester. Hope it helps. Subscribe and join my community. Ciao
@@MamoAir hello.. sure I’ll subscribe.. I also saw your weebill 3E tutorial. Now that you have used both the gimbals, can you tell which one give better performance in stabilisation..??
Hello my friend thanks for the video! I have a question. I use a A7IV + sigma 24-70mm 2.8+ small rig cage. Do I just need to balance it and then auto tune, or do I also need to select the "motor level" to "high" since it is a heavy setup? Thanks for the help!
Hello there. This are things you can try for each setup. If itnis too heavy try with the strong motor. Hope it helps. Subscribe and join my community. Ciao
Thank you so so so so so much!!!!!! Im so happy I found this video, you helped me so much with my gymball 🌞
Thank you. Glad I could help. Subscribe and join mu community
@@MamoAir i have a question. Im having trouble with stabilizing in portait mode! When i get to on axis its cool when i place my camera upwards but after that i cant get it to get stabilized :( its like something blocks it
Busqué este video en español pero está tan bien hecho que pude entenderlo en inglés sin ningún problema, y me ayudó bastante a usar mi primer gimbal. Muchas graciassss, saludos desde Perú
Hello there. Thanks for the comment. Glad I could help. Subscribe and join my community. Ciao
This video is amazing, thank you! Just one doubt. What's the difference between POV and F?
No problem. I am glad I could help. PoV mode sets free all the 3 axis while F is pan and tilt only. Subscribe and join my community
@@MamoAir thank you, perfect!
This was the video I was looking for! Straight to the point, easily explained, and simple steps. In the end, it worked! My Weebill S3 gimbal is working! Thank you so much. You sir have just earned a subscriber
Hello there. Glad I could help and thanks for joining my community. Stay tuned
Greetings, me again. I had a question:
I started using my gimbal in L mode, and after about 10-20 of seconds using it, it beeps a few times and says Axis Lock on the small screen with a lock symbol. And then it stops balancing my Canon EOS R 50mm. Do you know what this means? Is there a way to avoid it? I found that the only way to get rid of it is to turn off and turn on the gimbal again. Also for some reason, on my gimbal screen, the mode is written much smaller. In your video its right in the center with big letters but in mine its on the top left corner and in the center of the screen it says Av N/A. I have no idea what those mean.
@@berkkarsi hi there. Usually when that happens is because one of your axis is actually locked. Make sure you unlock all the motors. Another reason may be because your camera is not properly balanced or it is just too heavy for this gimbal. Hope it helps. Ciao
apanhei, mas consegui, seu video eh mto bom! obrigado! Do brasil!
Hello. Thanks for the message. I hope the video was helpful. Subscribe and join my community. Ciao
sir what is its payload capacity and sir can fit fx3 and sigma 85 in it
Hi. Please see the Zhiyun website. I am not sure. Thanks.
Subscribe and join my community. Ciao
What parameters do you recommend for taking videos of walking in the city? I tried a lot, but something just doesn't work. I use F mode. Follows hand right and left too fast and I have to manually adjust up and down, camera doesn't follow hand
At 15:18 you point to a clamp that for vertical tightening, tha freely spins for you. However mine does not freely spin. It hits the main long plate... and I cant work out why. We have the exact same equipment, fitted the same way. The only way I can spin the vertical clamp to loosen it, is to move it all the way up the top of the plate. Any else has this issue?
Best video for any beginner. Helped a ton....watch till the end you won't regret it!!!
Hello. Thanks for the comment, glad I could help. Subscribe and join my community
Do you have a full tutorial of how to set this up in portrait mode?
Hi Mel. Thank for the message. I do not have a full tutorial for portrait mode
thank you man! you helped me a lot
Hello. Glad I could help! Subscribe and join my community. Ciao
Brand new to video and just bought the Weebill 3S. This was a great tutorial! Thank you so much for putting it together. I don't know what I would have done had I not found you!
Hi there. Thanks for the kind words. Subscribe then and join my community. Ciao
Thank you for this instructions.
Hi. Hope I could help. Subscribe and join my community. Ciao
Thank you so much for the video! I do have one question. I would like to use the Shutter button on my Weebil 3S to start and stop recording on my Sony A6700. I have connected my camera through Bluetooth to the gimbal, but the shutter button on the gimbal is not controlling the shutter on the camera. Instead, it looks like it is controlling the focus of my camera. Do you know how I can change this option?
Nevermind! You have to press the shutter button harder to activate it, a more shallow click locks the focus point.
Sorry for the late reply. Glad you found the solution. Subscribe and join my community. Ciao
Hi Mamo, My footage seems a bit shaky with my Sony ZV E10 mounted over it. Is there any stabilization on / off option within this gimbal?
Hi, thanks for the comment. The gimbal helps to stabilise the image a bit, then you also have to apply some skills, also in walking. I mever have the perfect shot. Something that does not work for me is to use a gimbal and keep the stabilisation of the camera on too. May be give it a try. Subscribe and join my community. Ciao
i have a question look that the camera is using the batery anyways if it says conected and in the icon of the batery of the camera is with a plug at his side. there something im doing wrong ? i put the same configuration that you show in the video
Merhabalar fujifilm xs10 ile uyumlu mudur acaba öğrenebilir miym
Kamera kontrolü uyumluluk listesinde yok
when i turn on my gimbal it says axis lock is there any fix for this
Hi there. Thanks for the message. Make sure you unlock all the axis before turning on, that is usually why. Hit subscribe and join my community. Ciao
@@MamoAir thank you that worked!
@@shotbyandrei great
Ciao Mariano, premetto sono un fotografo e non un video maker , ma a volte mi piace fare piccole interviste o video che fino ad ora ho fatto con una Insta360 ace pro. Mi piacerebbe fare ora un passo avanti usando la mia Fuji xt4 o là mio nikon 850 per fare qualcosa di più professionale, usando un gimbal . A questo punto un tuo piccolo consiglio, compreresti il weebill 3s o il nuovo cinepeer 3e? La differenza di prezzo non è poi tanto tra i due cosa faresti?
Ciao Alberto, grazie del messaggio. Allora, ho lanciato proprio ieri un tutorial anche per il Weebill 3E.
Non ricordo di preciso le dimensione del 3S ma il 3E mi sembra più portatile. Secondo me come prestazioni son buoni entrambi, dipendentemente anche da che camera e lenti usi. Se vai per portabilità, prendi il 3E. Il 3S ha però più accessori come la maniglia e l'appoggia polso. Valuta queste cose.
Spero ti aiuti. Iscriviti. Ciao
Caro Mariano sono già iscritto da anni al tuo canale e devo a te come utilizzare un crane due con una go pro.
Del weebill 3 s , mi pigliava il fatto che avesse anche una luce incorporata, tu l’hai mai usata?
@@AlbertoBortoluzzi le luci su questi gimbal al momento non sono potenti. Sono da usare in ambienti scuri, certamente non alla luce del sole e la userei solo quando faccio vlog, sulla mia faccia. Per interviste ad altre persone bisogna essere abbastanza vicini al soggetto o non servono a molto
Grazie Mariano e auguri per quanto fai!
You, sir deserve a lot of praise for such a clear tutorial. Thank you!!
Thanks for the kind words. I just appreciated if you subscribed to my channel. Stay tuned. Ciao
once in sling mode and trying to hold it with 3 fingers does it make the gimbal wanna roll sideways? or is it centered? thanks
Hi. Sorry but I do not understand the question
Thank you very much for your very detailed video. I just purchased my Zhiyun Weebill 3S gimbal. Thanks to your video I feel more confident decision purchasing this product. I can't wait to view more of your videos.
Hi Ronnie. I am happy I could help. Subscribe and join my community. Ciao
record button on weebill 3s not working with Sony alpa7R 4A. If I press record from the app it's ok. If I press record button of the weebill 3s it functions as AF-ON button on my camera. The Camera is connected to the weebill 3s with USB to multi cable. Can anyone help me pls to solve this issue?
You may try press the record button deeper and harder, half press is to active autofocus.
You showed the wheel rolling gimbal and said that it is customizable. Wheel on my gimbal doesn't roll, probably I made some changes mistakenly. What can reset the wheel function to restore?
Hi, you can go to your gimbal's menu, and select Control Wheel Setting-Control Wheel Setting to choose your like.
thank you very much
Thanks for watching. Hit subscribe and join my community
Thanks a lot!
You're welcome! Subscribe for more. Ciao
very complet . i saw lot of tutorias and they dont explain as much as you . i just get the gymbal and follow all your instructions steep by steep and works great ! Thanks bro ! Saludos desde argentina , el culo del mundo. ! VLLC !!!
Cuao Federico. Thanks for the message. Glad I could help. Subscribe and join my community. Ciao
Insanely detailed! Thanks a lot for taking the time. Amazing tutorial 🙌🏻
Thanks Gustaveo. Hope it helped. Subscribe and join my community. Ciao
Hi, thanks for this video. Have you found a way to disable joystick panning at all? I like tilting using joystick but not panning. This used to be the case with older gimbals. Thanks!
Hello there. Sorry I have not tried to do so on my gimbal. Try to get in touch with the support team from Zhiyun. Subscribe and join my community. Ciao
So easy, so well explained and so helpful.
Such a great video.
Thanks
Hi there. Thanks for the message. I am glad I could help. Subscribe and join my community
Literally, nothing is on the gimbal yet I have everything on the camera body and I'm just trying to get the gimbal to hold it balancing position, but I turn it on. It tries to stand up collapses and gives Axis Lock..
I'm doing something wrong or something is faulty. Either way I'm about 15 minutes from tossing this out the window to the the next sad videographer to figure out because what the fuck??
Need help I don’t have the patience for these devices
Thanks for this video, Mamo!!! you really helped me understand how to work with my gimbal. I don't think I would have figured it all out myself.
Hello Gustavo. Thanks, glad I could help. Subscribe and join my community. Ciao
how i can change battery?
Hi. You cannot change the battery. The battery us built in and you will have tobsend it back to the support team if something goes wrong with it. Hope it helps. Subscribe and join my community. Ciao
You wouldn't hire a plumber, and not pay him after he's done. Would you? 😛
I know right! That would be rude! Hope the video helps. Subscribe and join my community. Ciao
I want one
Get it!
thanks a lot, great tut
Hello. I am glad I could help. Subscribe and join my community. Ciao
Merci beaucoup pour ce tutoriel !!!
No problem. I am glad I could help. Subscribe and join my community
Thanks so much for a great tutorial. I'm a newbie & your video helped me get set up.
Hello and thanks for the comment. Glad I could help. Please subscribe and join my community. Ciao
Thank you very much, Mamo Air. Hugs from Brazil. Helped me a lot.
Hello Gilbert. Thanks for the message. Subscribe and join my community. Ciao
Excellent video
Hello. Thanks for the message. Hope you enjoyed the video. Subscribe and join my community. Ciao
just had weebill for christmas and damn your tutorial is perfect, clear, simple and complete! thank you :)
Ciao. Thanks for the message. Glad you enjoyed the video. Subscribe and join my community. Ciao
So helpful and pretty good tutorial, its looks easy to understand from this tutorial video of weebill 3s
Subscribed 👍🏻
Thanks for the message. Glad I could help.
Mano Air you are amazing and you deserve the best. Thank you for all the time you put into this video. I am about to purchase one and it helped a lot.
Hello Dimitris. Thanks for the kind words. Glad the video helped. Subscribe to the channel and join my community then, it would mean a lot. Take care
Thank you!
Hello. Thanks for the message. I hope the video was helpful. Subscribe and join my community. Ciao
hey everyone, what can I do, when i broke my sling grip? I can't find the chance to buy it :/
Try to get in touch with Zhiyun website or Zhiyun support on instagram
Thank you so much! What an excellent video and probably the only reason I didn’t give up on setting it up and returning it!
Hi, Thanks. Do join my community then and subscribe to support the channel. Thanks
hello friend, a hug from Brazil, your explanation is excellent, thank you very much
Thanks Diogo. Hope the video helped. Subscribe and join my community. Ciao
Thanks from Brasil! This is the most complete video, thanks, thanks and thanks!
Hello Barbara. Thanks for the comment, glad I could help. Subscribe and join my community. Ciao
Not even zhiyun have so much detailed video about this gimbal avialable on youtube..thanks for this great video
Hello there. Thanks for the message. I am glad I could help. Subscribe and join my community. Ciao
wow! you help me a lot with this tutorial! thanks for doing that! this weebill 3s is my first gimball and i was lost before watch your video. awesome!
Hi Rodrigo. Glad I could help. Subscribe and join my community the. Ciao
GOOD EVENING YOU ARE VERY EXPLANATORY AND DETAILED THANK YOU VERY MUCH BE ALWAYS WELL !!!!
Hello, thanks for the comment, glad to hear you enjoy my content. Subscribe and join my community, ciao
great video
Hello and thanks for the message. Hope I could help. Subscribe for more videos and join my community. Ciao
YOU ARE THE BEST ON UA-cam FOR WEEBILL 3S ZHIYUN GIMBAL R .. DUE TO YOU I AM ABLE TO START MY CAREER AS A VIDEOGRAPHER
Hi. I am glad I could help. Subscribe and join my community. Ciao
Nice, complete and directly tutorial! Thank you very much.
Awesome. Hope I could help. Subscribe for more and join my community. Thanks
Once again a great job! You make it look easy!
Thanks Victor. Stay tuned! 🙃
This is not a simple process and your work is much appreciated! Thank you!!!!
Thanks. Glad I could help. Subscribe and join my community. Ciao
thank you so much! i was looking complete tutorial and this is the better i see, appreciate your time too show
Ciao, glad it helped, subscribe and jpoin my community
Thanks a lot, very detailed and straightforward
Glad it was helpful! Subscribe and join my community. Ciao
I just bought this Gimbal and the camera slips down. The Left main balancing arm tensioner lock is not holding the camera payload (A7RV and PZ1635 F4). The camera just drifts downward and then the balance is messed up. Even when I firmly tighten the lever lock it will continue to drift down when using.
Hi Mike. Thanks for watching. You better get in touch with zhiyun in your case. Or make sure the lock of the plate is tight. Subscribe for more. Ciao
Did you manage to solve it? Mine has the same issue
E o carregador dele, como da recarga ele ?
Recomenda-se a utilização de carregadores USB que atendam ao protocolo PD.
I love you, man. Thanks for the tutorial.
Hi there. Glad I could help. Subscribe and join my community. Ciao
Please help when I connect it with my sony a7iii with wire or wireless and while I hit record on my gimbal it only focusing but not recording... pls guide mr
Please use Type-C to Multi USB (LN-UCUS-A03) cable.
1. Please select "PC Remote" for your camera's "USB Connection".
2. If using electronic focusing, set the "zoom setting" into "on: Digital zoom" in the menu and set the photo format into "JPEG".
3. For Sony cameras, after connecting stabilizer and camera with control cable, power on the stabilizer and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the stabilizer when used with motorized lens. Digital zoom control is available on the stabilizer when used with nonmotorized lens. Please select zoom option in your camera's settings.
4. When shooting Panorama or Timelapse, it is recommended to turn off the Sony camera's auto review.
@@zhiyunsupportglobal706 thank you 🥰
@@zhiyunsupportglobal706when i press record button it starts focusing on both my cameras sony a7siii and sony a7iii only i can control iso with wheel with cable and Bluetooth, I tried the solution you mention but nothing happen
AMAZING 👏 love how you go through all these details 😊😊
Hi there. Glad I could help! Subscribe then and join my community. Ciao!
Muchas gracias ❤
De nada. Hope it helps. Subscribe and join my community. Ciao
@@MamoAir Ya me suscribí, saludos!
Are you required to use the phone app each time you use the gimbal?
Hello. Nope, you can use the gimbal without phone. Hope this helps. Subscribe and join my community. Ciao