Cinepeer Weebill 3E Tutorial (Under 8 Minutes)

Поділитися
Вставка
  • Опубліковано 6 лют 2025

КОМЕНТАРІ • 62

  • @Latif_ghrir
    @Latif_ghrir Місяць тому

    Thank you 🎉

  • @stephaniegarciacarrillo
    @stephaniegarciacarrillo Місяць тому

    Great demo!

  • @pjdexter168
    @pjdexter168 3 місяці тому +1

    My only issue is shooting vertically i have to completely remove the base plate and fit it on the side of my cage. A sony A7iii with a light 50mm lens there's just no room left to balance the regular way, unfortunately

    • @victor.melchorfilm
      @victor.melchorfilm  2 місяці тому

      Hmm, is it just the 50mm 1.8? Do you have a mic or other accessories attached?

    • @pjdexter168
      @pjdexter168 2 місяці тому

      @ no other accessories, if I remove the camera from the cage it fits fine. It’s the cage that’s the issue. It’s just frustrating I have to remove it as I use the cage for other accessories when going hand held. I’ve since switched to the dji rs3 and that allows me to keep the cage on.

  • @KevinMullarkey
    @KevinMullarkey 5 місяців тому +1

    Can you reset the settings back to factory settings?
    Can you do a normal steady panning shot (L-R) and titling shot (Up/down)?

    • @victor.melchorfilm
      @victor.melchorfilm  5 місяців тому +1

      Yes you can to factory settings and also it’s also set to normal panning and tilts 🙌

  • @ImaginetMedia
    @ImaginetMedia 7 місяців тому

    Excellent demo and instructions. Thanks for sharing.

    • @victor.melchorfilm
      @victor.melchorfilm  7 місяців тому

      @@ImaginetMedia I’m happy to help and thanks for watching! :)

  • @sensory404
    @sensory404 6 місяців тому

    Excellent. Short and simple!

  • @AnilstudioBalwanti
    @AnilstudioBalwanti 3 місяці тому

    Blootooth conect kese kre

  • @chrisnewtonrealestate
    @chrisnewtonrealestate 2 місяці тому

    Hey. Great video. I keep getting the "axis lock" error and I'm unsure on how to fix it. Can you give suggestions?

    • @victor.melchorfilm
      @victor.melchorfilm  2 місяці тому +1

      Thanks! Hmm, did you unlock all of the latches? I believe there are 3

    • @chrisnewtonrealestate
      @chrisnewtonrealestate 2 місяці тому

      @@victor.melchorfilm Thanks. Just tried it out and it works. Thanks a million. I thought I had to keep it locked after I balanced it

  • @kostasrestas
    @kostasrestas 6 місяців тому +2

    Nice man ! if i have it on PF mode ,for example, at the time i shooting ,and for some seconds in between,
    i want to have it on L mode (lock) ,just for a few seconds ,by pressing the trigger button ,
    after releasing it, will continue to shoot at PF mode again ??????
    you know , at the same shooting , on th the fly.
    can i make it with triger button ??? is trigger button customizable ?
    You know ,at DJI gimbals , you can do that , but at weebill s that i had ,
    when you press the trigger button , it was changing mode like forever ,
    it wasnt coming back at the mode that it was before pressing the trigger button.
    You know what i mean right ? i like to have at 1 shoot a PF mode or F mode
    and for some seconds between to lock at something with trigger and unlock instantly and continue same shoot like PF or F or whatever.

    • @victor.melchorfilm
      @victor.melchorfilm  6 місяців тому

      @@kostasrestas Thanks for watching! I believe so once you let go of the trigger it should go back into PF mode however I dint believe the trigger is customizable

  • @michaeld842
    @michaeld842 3 місяці тому

    Do you know if its work with sony zve10 with sigma 16 mm f1.4 ?

    • @victor.melchorfilm
      @victor.melchorfilm  3 місяці тому

      Yes definitely will work with that setup as its even more compact!

  • @Carlos504-l4q
    @Carlos504-l4q 3 місяці тому

    It has tracking mode

  • @KevinMullarkey
    @KevinMullarkey 5 місяців тому

    Almost impossible to use with an external mic mounted as the rear rotation motor obstructs the mic and causes an 'axis lock' in the display. Also near impossible to calibrate the vertical mode with an external mic

    • @victor.melchorfilm
      @victor.melchorfilm  5 місяців тому

      Yeah that is a bummer. One trick that might work with external mic in horizontal is to add a full cage and mount the mic on the right side with a longer 3.5mm cable

  • @sebastianserranogarza9314
    @sebastianserranogarza9314 6 місяців тому

    whats about the manual focus?

    • @victor.melchorfilm
      @victor.melchorfilm  5 місяців тому

      Unfortunately it’s not compatible with a focus wheel at the moment

  • @charlottebigotto6208
    @charlottebigotto6208 6 місяців тому

    hi! followed along to balance my gimbal, to my knowledge it's all balanced but when i turn my gimbal on, it makes a beeping noise then says 'axis lock" how do i fix this?

    • @victor.melchorfilm
      @victor.melchorfilm  6 місяців тому

      @@charlottebigotto6208 Hey! Could you double check and make sure all three axis locks are unlocked? If not let me know and I’ll see if I can find another answer!

    • @MalloryErvin
      @MalloryErvin 6 місяців тому

      @@victor.melchorfilm Hi! Having this same issue... all three axis locks are unlocked. Let me know if you have a fix! - Ally, SMM

  • @rm06dakind4
    @rm06dakind4 7 місяців тому

    Awesome Vic.

  • @Makandal19
    @Makandal19 7 місяців тому

    great video

  • @Alex_Cid
    @Alex_Cid 3 місяці тому +1

    Как на нем делать вращение на 360?

    • @victor.melchorfilm
      @victor.melchorfilm  2 місяці тому +1

      Yes, I’d recommend downloading the app to have more access to other features

  • @Pfagnan
    @Pfagnan 6 місяців тому

    GREAT THANKS!!

  • @armando.visuals
    @armando.visuals 7 місяців тому

    So you didnt have to rebalance to vertical? i missed that i think

    • @victor.melchorfilm
      @victor.melchorfilm  7 місяців тому +1

      You do have to rebalance it when switching to vertical, however it's the similar to balancing horizontal and only takes about a minute!

    • @LProds
      @LProds 2 місяці тому

      But there's no quick release right? So if you're shooting vertically and you wanna do a couple hand-held shots you have to rebalance again afterwards, right? Thanks

  • @NikkiNevermore
    @NikkiNevermore 7 місяців тому

    Hey! I'm looking at your compatibility chart. I see my sony a7c in there but the lens I like to use most is Sigma 24mm f1.4. I don't see that listed anywhere on your list. Is that compatible in portrait/vertical mode?

    • @victor.melchorfilm
      @victor.melchorfilm  7 місяців тому

      Thanks for watching! I’m not 100% certain since it’s not on the compatibility chart however because the A7cii + Sigma 24mm 1.4 is lighter than my Sony Fx3 + Sigma 24-70 combo I’m pretty certain it will be compatible in both modes :)

  • @mind6008
    @mind6008 Місяць тому

    Webill 3e or Rs3 mini?

    • @victor.melchorfilm
      @victor.melchorfilm  Місяць тому +1

      I haven’t personally used the Rs3 mini to give a proper recommendation. As of right now the Weebill 3e is $68 cheaper

  • @Born2Legit
    @Born2Legit 7 місяців тому

    Can a monitor be mounted?

    • @victor.melchorfilm
      @victor.melchorfilm  7 місяців тому

      Unfortunately, there are no threads on the side grip to mount a monitor on the handle. There are 3 threads on the bottom which you could screw a magic arm to mount the monitor but you wouldn't be able to mount the tripod anymore

    • @Born2Legit
      @Born2Legit 7 місяців тому

      @@victor.melchorfilm Would be the perfect budget gimbal had they left the mounting for accessories. Thank you so much for quick response!

  • @davidbowie2106
    @davidbowie2106 7 місяців тому

    Thx bro, bless you

  • @palmaestudio1381
    @palmaestudio1381 7 місяців тому

    Hi! please help me with something..i hace a Falcam cage...with a f38 quick release system...is there a way to use another baseplate beside the manfrotto that comes with the gimbal? like an arca swiss QR? thanks a lot!

    • @victor.melchorfilm
      @victor.melchorfilm  7 місяців тому +1

      Hey! You will have to use the included base plate to mount however, since the falcon cage has two 1/4 threads on the bottom you shouldn't have any issues attaching the baseplate to your cage :) Hope this helps!

    • @diegopalma5123
      @diegopalma5123 7 місяців тому

      Thanks!

    • @victor.melchorfilm
      @victor.melchorfilm  7 місяців тому

      @@diegopalma5123 Of course, thanks for watching!

  • @colinreidcr
    @colinreidcr 3 місяці тому

    I accidently set my gimble language to Japanese 😂 how do I get it back to English?

    • @victor.melchorfilm
      @victor.melchorfilm  3 місяці тому +1

      I believe if you go all the way to the bottom of the menu you can factory reset it!

    • @colinreidcr
      @colinreidcr 3 місяці тому

      @@victor.melchorfilm cheers!

  • @iammz81
    @iammz81 5 місяців тому

    Your code does not work anymore.

    • @victor.melchorfilm
      @victor.melchorfilm  5 місяців тому +1

      Hey! It recently got updated, please use code “VICTOR2024” this will work on all Zhiyun Products until November 30, 2024

    • @iammz81
      @iammz81 5 місяців тому

      @@victor.melchorfilm thanks man, but unfortunately it only gives 10% not 50off

  • @vanc3289
    @vanc3289 2 місяці тому +2

    Slow down. Too many steps missed