Hi Liam would this work for cultivated or would you change a few settings. Brilliant video. Also been hearing on the grape vine that the 1.11 update is proving to be not as deep searching as previous updates. Do you think this is true or is it just using the wrong settings on the legend. 👍🏻
I always go for m2 on cultivated , more nimble and higher frequencies are better to get through the mineralisation. I’ve not found much performance difference between .09 .11 , added features that come with .11 are good to have on the legend 👍🏻
Great video full of tips and tricks as usual. I didn't know about gb the pointer and I've often cursed my nokta pointer for going off at everything! Out tomorrow for the first time in a few weeks so will do that if it's going nuts 👍
Liam, Can you post your relic set up in a step by step word document in a video on your channel. I live across the pond in USA and would love to try it here and see if works for me. I am a relic hunter looking for coins, bullets, buckles, buttons and artillery pieces mostly. Please keep the great videos coming. I love to see the amazing finds you make!!
All metal or ground disc pattern if ground is lively , 4khz Field Mode Ferrous Tone break 10 Pitch audio Iron volume 5 non ferrous 10 Iron pitch 4 non ferrous 26 Audio gain 4 -5 Bottle caps 2( discrims large iron turn off if want to dig iron) Recovery 2-3 (low and slow) Ground balance and noise cancel Sensitivity set as high as you can without the legend becoming unstable Deep spade 😀👍🏻 Good luck🧑🦯
Hi Liam. Thank you, Great video as always. What would your opinion be on this large coil using it in Gold mode on the legend? Searching for Gold nuggets? Do you think it might work on getting better depth? Thank you in advance.
I always start if 2 st 1, and then accustom to the ground and the way I want to hunt , I have had it at if 1 st 1 and as high as if 5 st 1, always changing settings when on feild
Hi Liam, I've used these settings myself and have had some great results. Now I've downloaded 1.15 update, I'm going to use these same settings again and will set the DT at 4. Would you still use this program or would you opt for using beast mode instead?
Love them big fat silver two shillings, they have such a fat milled edge. Not found one in donkeys years, but now I've said that, I'll probably go n find one in the next few weeks. Your pinpointer is going crazy cuz its picking up the iron and mineralisation (UPDATE just got to the point where you ground balanced it YOLO). I have some permissions like that. If you hold the tip to the ground, then turn it on, it will discriminate the iron and minerals. Fancy goin out with a flat phone battery. First item in my kit bag is a powerbank. Having said that I went detecting on Sunday n my damn coil hadn't charged properly n died after 2 hours. Absolutely raging, if you wana slate XP, its the antique pre historic method of charging the coil !!
@@HistoryRevisiteduk ahh so I guess that’s where the 60 tone comes in ? So I can identify by the tone as the checker may not be working then at certain depth , cheers mate .
@@HistoryRevisiteduk I’ve talked with a few people about it and some say there’s does the same thing and others say they can go much longer. It will show 3 bars left, but will automatically shut down about every 5-10min. Then I have to start it back up again and it will do the same, but if i switch out of 4khz the battery will continue to run after switching. There is something about 4khz on my machine that makes the battery drop dead.
@@kody3377Have you Contacted Notka Macro Product's Yet ?? About the Battery Problem and I was having the EMI Problem's with the Simplex + that would not shut up until I turned it off and then I traded it up for the Equinox 600 and I have also bought the X-Terra Pro and it's a different story of what I have been wanting for 50 years of Detecting that a detector that will tell me what is in the ground before I take the time to go ahead and Dig it up and then be disappointed 😞☹️ again and again when I was using the Simplex + Notka Macro Product's.
@@carolrice2063 yeah, I’ve tried everything. This winter when the ground is froze I’m going to send it in. I love the machine. It is getting worse tho. Now every once in a while I will turn it on after full charge &!won’t fully charge no matter how long I charge & within 10 min of detecting the machine will shut down, but once I turn it back on it will run again 2 hours if I’m lucky then it keeps shutting down. I use that external battery pack more then my pinpointer…lol. Jk I do always have that external pack with me tho. My Simplex will dang near go all week. I love the detector & no complaints other then the battery issue. Then when it does it’s shutting down thing you have to re tune & reground balance.
Hi Liam would this work for cultivated or would you change a few settings. Brilliant video. Also been hearing on the grape vine that the 1.11 update is proving to be not as deep searching as previous updates. Do you think this is true or is it just using the wrong settings on the legend. 👍🏻
I always go for m2 on cultivated , more nimble and higher frequencies are better to get through the mineralisation. I’ve not found much performance difference between .09 .11 , added features that come with .11 are good to have on the legend 👍🏻
Uncovering The Nokta Legend - Which Version Will You Use #noktalegend #metaldetecting #metaldetector
ua-cam.com/video/0XL8gVyzn10/v-deo.html
Oh man why haven’t I watched this sooner?!! Need more depth from my Legend and this is going to help a lot!! Thank you.
The legend looks like a cool rough machine. I love metal detecting.💪 greetings from Dominican Republic
Hello and welcome 🙏
@@HistoryRevisiteduk thanks
Good to see you doing what your good at. Mum x
Great video Liam. Great tips for searching. Keep up the good work.
Great video full of tips and tricks as usual. I didn't know about gb the pointer and I've often cursed my nokta pointer for going off at everything! Out tomorrow for the first time in a few weeks so will do that if it's going nuts 👍
Liam,
Can you post your relic set up in a step by step word document in a video on your channel. I live across the pond in USA and would love to try it here and see if works for me. I am a relic hunter looking for coins, bullets, buckles, buttons and artillery pieces mostly. Please keep the great videos coming. I love to see the amazing finds you make!!
All metal
or ground disc pattern if ground is lively ,
4khz Field Mode
Ferrous Tone break 10
Pitch audio
Iron volume 5 non ferrous 10
Iron pitch 4 non ferrous 26
Audio gain 4 -5
Bottle caps 2( discrims large iron turn off if want to dig iron)
Recovery 2-3 (low and slow)
Ground balance and noise cancel
Sensitivity set as high as you can without the legend becoming unstable
Deep spade 😀👍🏻
Good luck🧑🦯
@@HistoryRevisiteduk thank you much
@@HistoryRevisiteduk But we don't have Bottle cap setting available in 4khz single frequency, right?
Love the videos Liam. Your logic makes sense
Hi Liam. Thank you, Great video as always. What would your opinion be on this large coil using it in Gold mode on the legend? Searching for Gold nuggets? Do you think it might work on getting better depth? Thank you in advance.
Not as good as the lg24 , smaller faster , will hit better , and less mineralised footprint because of size
Как вам повезло ,что вы ищите в таких старинных четких местах!!!! Где трава такая низкая💪
cheers Liam we learn alot from your waffle !
What was your threshold, threshold frequency, sensitivity, iron filter and stability settings? You did not mention them in the video
I don’t use threshold just iron audio
Sensitivity always run as high but as stable as you can
I always start if 2 st 1, and then accustom to the ground and the way I want to hunt , I have had it at if 1 st 1 and as high as if 5 st 1, always changing settings when on feild
Thanks mate. Love your work. Cheers HH Australia
Appreciate it buddy , good fortune 🧑🦯🙏
Hi Liam, I've used these settings myself and have had some great results. Now I've downloaded 1.15 update, I'm going to use these same settings again and will set the DT at 4. Would you still use this program or would you opt for using beast mode instead?
I never liked beast mode single tone and bad vdi on deep targets
Keep on waffling mate 👍
Good video and will try those settings later 😊is that the nokta pinpointer liam
Am no that keen on it ..
lol no buddy , it’s an old whites pointer , can get really over sensitive
Hi ya mate. Can you post settings? I am helping some archeologists looks for chunks of sharpnel. Think this would be perfect
Quality as ever mate
love it cant wait to see the next video :)
Hi Man, we are on the silver song !...take care you 'll finish to got talents 🤣🤣
😂 🎶
Thanks for sharing
What more can I say brilliant job like 👍 👍 live ya liam brother
Love them big fat silver two shillings, they have such a fat milled edge. Not found one in donkeys years, but now I've said that, I'll probably go n find one in the next few weeks. Your pinpointer is going crazy cuz its picking up the iron and mineralisation (UPDATE just got to the point where you ground balanced it YOLO). I have some permissions like that. If you hold the tip to the ground, then turn it on, it will discriminate the iron and minerals. Fancy goin out with a flat phone battery. First item in my kit bag is a powerbank. Having said that I went detecting on Sunday n my damn coil hadn't charged properly n died after 2 hours. Absolutely raging, if you wana slate XP, its the antique pre historic method of charging the coil !!
Thanks for the continued support gazza 👌🏻
how com it doesnt show up as tressure ? or showing its scrap ?? i was always going off the two graphs
Ferrocheck Only good to about 4-5 inch down depending on size of target
@@HistoryRevisiteduk ahh so I guess that’s where the 60 tone comes in ? So I can identify by the tone as the checker may not be working then at certain depth , cheers mate .
Bellissima moneta in argento 🎉 like
❤❤
👍👍
I hate that Nokta shovel, I have already bent my shaft twice and I wasn't even prying anything with it.
Mines solid dug hard ground and ran over it with the car 😂
ตั้งค่าไวเกินดูไม่ทัน
You need to slow down!
I can’t hunt for 30 min in 4khz without the battery dying. If I know I’ll be using 4khz I bring that external battery.
Alright Cody , you should be getting a lot more than 30 mins in single 4khz , definitely something wrong there,
@@HistoryRevisiteduk I’ve talked with a few people about it and some say there’s does the same thing and others say they can go much longer. It will show 3 bars left, but will automatically shut down about every 5-10min. Then I have to start it back up again and it will do the same, but if i switch out of 4khz the battery will continue to run after switching.
There is something about 4khz on my machine that makes the battery drop dead.
@@kody3377Have you Contacted Notka Macro Product's Yet ?? About the Battery Problem and I was having the EMI Problem's with the Simplex + that would not shut up until I turned it off and then I traded it up for the Equinox 600 and I have also bought the X-Terra Pro and it's a different story of what I have been wanting for 50 years of Detecting that a detector that will tell me what is in the ground before I take the time to go ahead and Dig it up and then be disappointed 😞☹️ again and again when I was using the Simplex + Notka Macro Product's.
And have you ever done anything like a factory reset on your detector after you got the update ????
@@carolrice2063 yeah, I’ve tried everything. This winter when the ground is froze I’m going to send it in. I love the machine.
It is getting worse tho. Now every once in a while I will turn it on after full charge &!won’t fully charge no matter how long I charge & within 10 min of detecting the machine will shut down, but once I turn it back on it will run again 2 hours if I’m lucky then it keeps shutting down.
I use that external battery pack more then my pinpointer…lol. Jk
I do always have that external pack with me tho.
My Simplex will dang near go all week.
I love the detector & no complaints other then the battery issue.
Then when it does it’s shutting down thing you have to re tune & reground
balance.