How To: Whirlpool/KitchenAid/Maytag Dishwasher Lower Door Seal W10909089
Вставка
- Опубліковано 5 вер 2024
- How To Replace: Whirlpool/KitchenAid/Maytag Lower Door Seal W10909089 www.appliancep...
For a full article, please visit: www.appliancep...
Symptoms: damaged, water leaking on the floor.
Tools: Torx 15 driver, 3/16" nut driver, flathead screwdriver, tape.
This Whirlpool/KitchenAid/Maytag made Dishwasher Lower Door Seal replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, Kenmore Dishwashers: W10667473.
Buy the new Dishwasher Lower Door Seal W10909089 here: www.appliancep...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
DIY Repair Group: / fixmystuff
Twitter: / applpartspros
While standing on my head, I had thought the lower 5- 3/16" screws were rivets before, I watched your video. Thanks for enlightening me!
You're welcome1
Thank you for these excellent videos.
Today I was hoping to easily snap off that door seal to facilitate some much-needed deep-cleaning.
It's not worth removing an otherwise perfectly good door though so it's scrub brush and a headlamp for me today.
I'm sure I'll be back. This channel is one of the best.
You're welcome!
Thank you so much!!! I just did exactly what you demonstrated and I didn’t have to replace the bottom seal. It was tremendously filthy so after cleaning out the gunk, dishwasher runs like new with no leaks!!!!!
More helpful than the repair guy that was just at my house. Thank you
Glad we were able to help you out. If there is anything we can help you with in the future please let us know.
Highly recommend buying the magnetic nut driver. Also the taping method didn’t work for me as when i closed the door the lower door deal would shift slightly anyway despite using the tape. I had to take the door fully off to drive the 5 screws in properly. It was a pain getting the door back on. I learned a lot. My back got pretty beat up in the process. Good luck.
This video was very helpful. I ordered the part I needed from your website and had it in a day! I just wish I would have had a magnetic screwdriver. That part was a pain dropping the screws in the trough.
Glad we were able to assist you. If there is anything we can assist you with in the future please let us know!
My problem was, DW was working fine, started leaking left corner, replaced the rubber seal (all one piece for sides and top), fixed as mentioned further below. If I had to do it again I would have replaced the rubber seal and bottom seal at the same time.
(FYI - Watching with the front panel off and setting it to the side plugged in and start the wash, you can see the stainless steel tray fills with water when the spray arm is active, Looks like the insulation on the door is supposed to absorb any small splash or leaks. If they would have made the tray 1/4" higher I don't think there would be a problem).
Fix - The bottom seal (and probably the rubber door seal) worked for me however, make sure you push the tabs in and tighten as you go and go back and check/tighten each screw again. Do not over tighten and strip it out.
While trouble shooting after replacing the rubber seal (all one piece for sides and top), I removed the old bottom door seal, reinstalled it and it leaked worse, I noticed I didn't have the tabs in. Put them in and tightened up the screws and there was hardly any water coming into the stainless steel tray (designed to hold water). but when the sprayers started it filled the stainless steel tray (like it always does, almost to the top) and would splash over at the left end.
So I thought the spray arm was bad (bought a spray arm and this bottom door seal, just incase... to save a trip.). Replaced the spray arm, still had splash and leaking. Replaced the bottom seal, verified tabs were in, tightened all screws snug, then checked again and tightened again and not any leaks.
Thank you for the information. We're glad your dishwasher is up and running again.
You sir are awesome! Cracked mine on accident after flooding kitchen 🤦♂️thought I was gonna have to buy a new dishwasher! 🙏🙏
If you replace the outer and lower door seal and still are getting leaks it can be clogged filtering from food hair in the dishwasher drain filter, clogged hose, a new drain hose is on backwards, or most likely is the lower spray arm.
Take out the spray arm and try cleaning it , soak it in some Lyme scale cleaner. If still leaks replace the spray arm as may have become warped by heat of the heat cycle
And tip to work on leaky dishwasher. Take them outside and hook up to an outdoor hose so don't get leaks in the house while trying to figure out what's going on.
Take the dishwasher outside??
Mine was leaking like crazy at the bottom left. I replaced the spray arm, no more leaks!
Excellent video! I should have worn gloves like as shown - that metal edge is sharp when cleaning!! Thank you
You are welcome. If there is anything we can help you with in the future please let us know.
Ok guys, so i finally figured out what else may be the issue here. See that black rubber gasket? The ends are bent inwards. One of the ends in my dishwasher somehow got straghtened out, and so whenever i closed the door the plastic lower seal would overlap the rubber, thuse creating a gap - hence the leak!
Glad you were able to figure out the leak.
I just found a whole lot of food debris behind my door gasket which made the middle hard as a rock. Not sure if just cleaning behind it will fix it, but I'm giving it a try.
Hopefully just cleaning the gasket will have fixed your issue. If there is anything we can assist you with please let us know.
This was a good video, but we have replaced every part on our Kitchenaid, the motor assembly, the spray arm, all 3 door gaskets and it still leaks. Like other people in this post we had our last Kitchenaid for over 20 years. Bought this one with the extended 5 year warranty and it is a piece of crap. We are going to try and take the door seal off again. We have always bought the top of the line Kitchenaid appliances, to replace this dishwasher it would cost us about $2500. After spending over $600 on parts and labour I will never buy another Kitchenaid product. I think I will buy a Samsung or LG even if it doesn’t match my other black stainless steel appliances. If anyone has any other ideas for a fix, it would be greatly appreciated.
Thank you
You're welcome!
This is actually just part of the problems. Most of the times, there is a lot of dirt collected in front of the tray which has to be removed. That seal rarely breaks. Cleaning would be the best choice other than just starting to replace expensive parts (40 bucks for this plastic seal is clearly too much).
BTW, watch out with your fingers as the door has sharp edges when you try to clean the tray (I myself got few cuts).
3 1/2 year old Whirlpool and it's suddenly leaking like a sieve! Just started last week. There's some kind of soft material at the bottom and it's soaked well before the wash cycle is done and water is steadily dripping. I didn't see anything wrong with the bottom seal you replaced, other than some build-up that looked like it could have been cleaned out and reinstalled. Why should this be happening on a unit this new? My previous dishwasher was 23 years old and the only reason I got rid of it was the front panel was starting to rot out at the bottom. Whirlpool quality must be nonexistent!
Same issue and time for me, just replaced both door seals and still leaking, cant figure what the issue is. Very frustrating to say the least!
did you look at the float valve opening under the lower right side?@@chrisgall4664
Did you find a solution to this? I'm about to glue in some weatherstripping under the existing bottom door seal to see if that stops the sloshing that leaks out the left side.
@@MBNB85 yes, it was caused by the dish detergent I was using. I had a big tub of powdered dish detergent and started using it after running out of the liquid stuff I'd used for years. Since the leakage started when I ran out of the liquid, it made sense that the powder might have been the problem. No more leaking.
@MBNB85 our 3 year old whirlpool just started this. Going to try the lower door seal and if not, then looks like lowes gets more money, miss the 1990s dishwashers that lasted
Thanks for the info, it was very helpful
You're welcome!
thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My Kenmore is leaking from the bottom also. Is there another seal at the bottom of the door other than this one? Mine is leaking but it looks fine and I don’t see any obvious reason why it would be.
check under the float valve opening
Mine is an older kitchenaid model and doesn't have screws for the door seal. Looks like it's just a slip on black strip
Cannot figure out the locking tab business.
What is your model number?
Hi, a friend fell on the door and there is a big gap on the top of the door. And then the other side it tight. It’s about an 1/8” gap. Does the door need to be replaced.
How do you know if the door seal is bad?
I have this problem also but to me it just looks like there is a build up of old dish soap that is causing the door to not seal properly. I am going to take my door apart, clean it, then run it and see what happens. Eliminate the easy fixes first. Hope this helps and good luck.
@@mlb7772001 any luck?
Got a card in the mail about a law suit for Whirlpool/KitchenAid dishwashers that have been leaking.
any model?
Anybody get one of these?
I am having the same leaking issue with my Whirlpool WDT750SAH. Would greatly appreciate any info.
@@psq9245 mines gotten worse and worse over time. Same model as yours. Initially it was the diverter motor gasket and then the bottom for seal, which for the life of me, makes 0 sense as to how a straight line of plastic is going to seal a dishwasher without rubber. Might have to 86 this 5 year old unit 😢
I could never fix appliances with gloves on and I been doing it for 40+ years
It sounds like a popping sound when we open the door as if the bottom seal is catching. Does it need to be cleaned or replaced? Has anyone had this happen?
Does the gasket look worn out or are you sure it is installed correctly?
Hello, thanks, I just did exactly what you demonstrated ( change the bottom seal) and cleaning but Infortunately , again leaks always 🫣 after couples cycles , I checked the seal around , everything seems ok…so 🤔 , thanks again
Check the spray arms, take a toothpick or something small to clean out the holes in them. If those are clogged it can cause the unit to leak.
Super helpful
Thank you!
My Styrofoam between the door panel won't let me get thw door off. What do I do?
What do you mean it won't let you get door off? What is the model number of your dishwasher?
I've replaced the door gasket, the cross brace and the bottom door seal on my 4-year-old Whirlpool and IT STILL LEAKS! I'm over Whirlpool completely.
I have the same problem
Me too paid $600 for mine it’s the top of the line and had it for 5 years and mines leaking left corner replaced door gasket and found this video now going to try this bottom door seal hopefully it will fix my issue. My old roper dishwasher was 16 years old and never had issues with it and never had to replace gaskets or seals 🙄
@@JulyRobbins Heather, I spent more than $400 trying to fix ours. If you are able to fix yours, please let me know. The dealer told me if repairs cost more than $200, to just buy a new dishwasher. Good luck!
The lower spray arm might have gone bad and need to be replaced. This could cause high pressure spraying of water into the wrong places.
@@JulyRobbins I would also replace the lower spray arm. Could be spraying water into the wrong places that the gasket can't stop or door seal. The defective spray arm could also be causing waves of water to slosh around.
It sounds like a popping sound when we open the door as if the bottom seal is catching. Does it need to be cleaned or replaced? Has anyone had this happen?
What is your model number?