This video helps me a lot, thank you Jason. I have a short on VCC main iPhone 6 at Q1403 and I know it’s not Q1403. Somewhere on the vcc main power rail and it’s a tough short like you, just can’t find it by freeze spray with Q1403 still on the board because that’s the dude get hot first. I took your advice solder vcc bat and vcc main under q1403 with freeze spray and I founded a vcc cap c1552 near backlight boost drive were shorted. Replace it, everything went well now. Can’t say thank you enough.
This is my first comment on any of your videos. So first, you’re amazing.. your technical skill and knowledge, in addition to your clear verbal explanations and video capturing.. wow.. I’m very impressed. Takes me back to my two-way radio days.. love it!! Seems like in the first video I saw, you were using thermal imaging to find a short.. I guess this one was made before you had thermal imaging?
Good job, like your videos! Why are you wasting time taking off Q1403 and making jumper, find the short and put the ic back? Take off a vcc_main cap, ->next to wifi, inject directly the voltage. Its better to replace 2 caps, than a cap and an ic...
Hello, i have 6s Plus and not power on.. first i charge it on cheap crapy car chargr, than whole day was charging with laptop and play on the phone, and just stop working... i try with old original battery, connect, disconect the battery cable many times.. not work only one time apple logo apear and not power on again :( what shoud be the problem, i love this phone and i have sentimental data on it is it fixable? and how much will cost, im from Bulgaria.
Hi Jason, great video as always. Can you do a video on finding an open circuit on an iPhone? There are tons of videos on youtube for short circuits but i cant find any for finding open circuits. Thanks.
This question isn't related to this video but I have a phone with sporadic Touch. I replaced the Touch IC Meson Chip and now phone touch works a little (still erratic) but screen has grey/white bars or lines down it. Any idea what could have caused this?
hi jason, im working on an iphone 6 atm it was water damaged around u1601 an was doing the apple logo bootloop, i found it was bad caps around the area that were bad and removed them. so the phone booted to the main screen. the next day i go and check the phone and it was dead. now theres a short to ground on pp_ldo11 which is causing the loop again. any ideas what component might be shorted its not c4002_rf as iv removed it and still short to ground. thanks
Can i ask you why are you bumping ICs when the solder is melted? Is it important? Thanks... btw .. I like you so much man :D Im looking at every video you are uploading :)
I do it just to be certain everything has flowed and also to break any surface/barrier that could be keeping a ball from making contact. I guess it's a security blanket :D
Hmmmm.. I really don't like using duster for freeze spray because of the bitter nasty residue it leaves behind. I think I paid $8 for this can of freeze spray. We buy it at Microcenter.
Hello sir the best video iphone repair but sir my iphone6 water damage and shouting motherboard iam Indian and please solution motherboard repair please replay and sujestion 😞😓
This video helps me a lot, thank you Jason. I have a short on VCC main iPhone 6 at Q1403 and I know it’s not Q1403. Somewhere on the vcc main power rail and it’s a tough short like you, just can’t find it by freeze spray with Q1403 still on the board because that’s the dude get hot first. I took your advice solder vcc bat and vcc main under q1403 with freeze spray and I founded a vcc cap c1552 near backlight boost drive were shorted. Replace it, everything went well now. Can’t say thank you enough.
Great work Mr. Jason Big fan here 😊. Hope the best of the best
Thank you :)
heya the more I watch the more I learn thank you so much
This is my first comment on any of your videos.
So first, you’re amazing.. your technical skill and knowledge, in addition to your clear verbal explanations and video capturing.. wow.. I’m very impressed.
Takes me back to my two-way radio days.. love it!!
Seems like in the first video I saw, you were using thermal imaging to find a short.. I guess this one was made before you had thermal imaging?
Jason, you are the best
Good job, like your videos! Why are you wasting time taking off Q1403 and making jumper, find the short and put the ic back? Take off a vcc_main cap, ->next to wifi, inject directly the voltage. Its better to replace 2 caps, than a cap and an ic...
Love your videos! Missing new content but there's plenty I haven't seen to keep me occupied. Thanks man! Merry Christmas!!!!!!!
5 amps !! how many amps this kind of board is able to drain without serious damage ?
Hello, i have 6s Plus and not power on.. first i charge it on cheap crapy car chargr, than whole day was charging with laptop and play on the phone, and just stop working... i try with old original battery, connect, disconect the battery cable many times.. not work only one time apple logo apear and not power on again :( what shoud be the problem, i love this phone and i have sentimental data on it is it fixable? and how much will cost, im from Bulgaria.
That capacitor looks so innocent, sneaky little git lol.
There is definitely something satisfying about knocking these caps off the board......
Can you please post the link for the freezing spray that you recommend thanks
Sir, freeze spray is refrigerant, tetrafluoroethane=R-134a.
Pls pls what is the name of the spray u used
Hi Jason, great video as always. Can you do a video on finding an open circuit on an iPhone? There are tons of videos on youtube for short circuits but i cant find any for finding open circuits. Thanks.
Watching your videos over and over and thanks for gr8 tutorials
Will you be kind to show how we can find vcc main ? Cheers
hello! Where can we found phone schemes? I need few of them.
good job and wy you have not fixed a half backlight of this phone
What freeze spray you using ?
i think you have to use a infrared sensor to detect exact point of heat .
My PSU has a maximum current of 1 ampere. Would it work for finding a short on VCC_MAIN?
This question isn't related to this video but I have a phone with sporadic Touch. I replaced the Touch IC Meson Chip and now phone touch works a little (still erratic) but screen has grey/white bars or lines down it. Any idea what could have caused this?
hi jason, im working on an iphone 6 atm it was water damaged around u1601 an was doing the apple logo bootloop, i found it was bad caps around the area that were bad and removed them. so the phone booted to the main screen. the next day i go and check the phone and it was dead. now theres a short to ground on pp_ldo11 which is causing the loop again. any ideas what component might be shorted its not c4002_rf as iv removed it and still short to ground. thanks
Thanks for metter showing
thanks bro so thanks
Great sir
안녕하세요..^^ 좋은 영상 잘 보고 있습니다.
Can i ask you why are you bumping ICs when the solder is melted? Is it important? Thanks... btw .. I like you so much man :D Im looking at every video you are uploading :)
I do it just to be certain everything has flowed and also to break any surface/barrier that could be keeping a ball from making contact. I guess it's a security blanket :D
Hello
What is your microscope model?
Is Amscope SM745TP
Hi, what is the name of that duster that you said is better?
Thank you
Hmmmm.. I really don't like using duster for freeze spray because of the bitter nasty residue it leaves behind. I think I paid $8 for this can of freeze spray. We buy it at Microcenter.
STS Telecom can you post the link for freezing spray thanks
How do you like the TekPower TP9605BT? Does the computer work with it pretty good?
My only complaint is battery life. They made this thing turn off automatically for a reason :)
He bro. Pls answer my question
Which degree ur using freeze spray?
+Mandip Lubana I think this stuff is around -40F
sir which spray is this naam
U R awesome man!
What torx screwdrivers do you use?
Love the tweezers can i get some? please.
as hard as I've tried, I cannot read the model # on these! I know I ordered them from all-spec tho..
Boss u ask me who is name to repairing softwear in your pc
ATIF QADRI Bhai its ZXW Software... aap ko is ka box buy karna paray ga. Box main hardware key hai js say yah software chalta hai... google karo zxw
make video on how to remove icloud lock from iphone 5s
Good
Списибо, было интересно смотреть.
Hello sir the best video iphone repair but sir my iphone6 water damage and shouting motherboard iam Indian and please solution motherboard repair please replay and sujestion 😞😓
Hi sir where cool at this speeer
6 AM start *phew*
I could start later and work later but 6am seems to be when I do my best. Quite a few days where I don't work past 3pm though and no weekends.
Oh right. We can meet eachother when I start and you leave (hope you get that joke). I'm the opposite (start late, end late)
I like
Lol poop on the speaker
Ewwww!
Gros job. Plz for Give me tour facebook