All these years later, FL4211 still the culprit. Mine popped from from a fall, rather than being burnt out. Likely could've thrown it in the oven for a bit, and would've saved me some debug. Thanks for the solid video!
I have techs ask me about board repairs and I recommend them to watch your videos because you keep it real. Thanks and keep being the Jason that you are!
My first 6s had a microphone problem. In fact, it was not exactly the microphone but a deeper problem. People at the other end had trouble to understand because as I was talking the sound kind of fading away. It’s like while taking I occasionally put my hand between the mic and my mouth and remove it.
I have the same problem on my iPhone 6s, but sad to say i don’t have the equipment needed, so i decided to remove the caps, coil and diode using a Nail Nipper. And now i’m waiting for someone who can solder it, parts is ready i got it from AliExpress. Would you help me? I’m from Philippines. Hope you will notify this thing. HAND
hey you areally a master in those repairs!!! i've also same back light not working on the 6s therefore i would like to try my own the repair what is the air solder temperature you use? thanks
Hello, I'm with an iPhone 6s with the following defect; when it turns on the Apple logo appears apple and erases only getting the backligth on, when it updates it from error 6. Do you know what can be happening?
I have been in the paintless dent removal for 18 years, i tragically lost my wife last year and started replacing iphone screens as well as samsungs,( trial and error just figured it out) . I watch your videos quiet frequently and would really like to excel in logic board repair. im raising my two kids on my own and would like to progress in micro soldering since i cant chase storms any longer because i have to raise my kids. Im very passionate about Apple products and was wondering if i could maybe chat with you , it would be greatly appreciated, thanks so much! Todd Smith ( The Phone Guy )
Hi, hope someone can help me. I have an iPhone 8 with backlight issue and a donor iPhone 8 board (intel). 35, 37 and 39 are normal value on J5700. R5733, R5734 and R5735 are good. D5661 and D5660 are ok. All backlight capacitors are normal. Just in case I have swapped R5733, R5734, R5735, D5661, D5660 and U5660. The donor working fine with those parts that I have taken out from the other one but the phone still has backlight issue with the donor's parts. Any idea, please?
Is there a way I can send you my girlfriends iPhone 6s to you to see if it can be repaired the image does not show up on the phone screen but when I plug the phone into a tv the image shows up on the tv and I am able to look at the tv and then touch the phone screen and use the phone
PLEASE I NEED HELP ASAP! My volume buttons stopped working so i decided to repair the phone my self. I have repaired iPhones before. Before i disassembled the phone i made sure that the phone was turned off and i removed the battery before i removed anything else. After replacing the volume button i put the screen back on to test the volume buttons however the screen didn't light up. eventually the screen lit up but every time i put the brightness up on my phone it goes extremely dim. is this a backlight problem or is it something else? please i need help . Thanks.
Donald Ellett if you're experienced and can change your screen on your own for an iPhone 6. Anywhere from $18 to $50. If you have someone else do it it could be anywhere from $50 to $200
Hey can anyone help me? I was just at nigh repairing my phone and I used the front camera, then the white flash came up and then the phone shut down. It didn’t really shut down, the screen didn’t work. I tried another screen and that didn’t work. I tried another battery, but the flat battery symbol only came up. After charging, the screen goes blank. I think it was a screen I bought from bee fix. As soon and I plugged the battery in, something started to spark on the phone
I have an iPhone 6s with a broken back light and I need someone to fix it so if you can contract me through here and work something out it would be great
I like your workbench with the BIG screen that shows all schematic. It awesome. The question is: how did you get all those schematic. Apple don’t provide them. They like to control everything. They don’t want to share the repair business.
Marco Polo thank u. I think employees must leak them out or something. Some of them I find on Google but for the most part, I access them using software purchased from China. The data is stored on servers in China (I think). It amazes me that these companies are able to sell subscriptions to the data without getting shut down.
I found this when i used to repair consumer electronics, stock typical faults were 90% of the repairs, 6-7% were oddball ones that made the brain work, eek :-D. There was a tiny 3% that could not be repaired, i had to remember not to blame myself for such a minor amount of failures.
Yo so I got this iPhone 6s, and the problem is that when I turn up the brightness, the backlight goes out.So then I turn the brightness all the way down, reset it, turn it back on, put it to sleep and then wake it again and then finally the backlight stays on, as long as I don’t turn up the brightness. Do you have any idea as to why this might be? Or does anyone? Appreciate it!
Realy like your videos! I have a question. Can i replace on 6s backlight glass diod with a backlight diod from iphone 6 (i can not find the glass diod localy)?
Had a good/bad day learning, my first s6+ backlight filter was a success then i tried s6+ u3200 chip but lost a pad removing it :( may be a jumper option but im still waiting for ZXW from china
Hi I just bought an iPhone 5s unlocked from someone and they gave me everything but when I opened the phone up. I saw that the digitizer looked like it was corroded or burned by something. So I scratched the corosssion off and then looked like the solder fell off of the pins. Can you fix this for me. It's not botched or anything but I don't know if it needs to be replaced or fixed. Pls help
When u put my multimeter to my battery, it reads 2.40 and doesn’t go up or down. When I put multimeter to ground and contact near battery connector and it reads 1.72 and doesn’t go up or down? What’s goin on? My phone won’t turn on or charge. Please respond I’m begging u
teach us how to actually deal with heat , i mean when i fix some peace lets say charge ic , i use 2 coins and tape allover the place scared to re flow other stuff that i dont want to, i actually dont know when it is a too much heat or too less idk i am practicing but not giving up :D
+aqib2000 catch or not, the title of this video is EXACTLY what happened to this phone. A capacitor shorted and backlight went bye bye rather than someone screwing up a screen replacement.
All these years later, FL4211 still the culprit. Mine popped from from a fall, rather than being burnt out. Likely could've thrown it in the oven for a bit, and would've saved me some debug. Thanks for the solid video!
I like the length of your videos that hit all the critical points without dragging on. Well done.
I like your bench... Can i ask you for the hight of that table? Because i am looking to build a good work bench...
I have techs ask me about board repairs and I recommend them to watch your videos because you keep it real. Thanks and keep being the Jason that you are!
Good job perfectly working🤝😎🙏🙏🙏👍👍👍👍👏😉😎😍😍
Really you’re good repair masters
My first 6s had a microphone problem. In fact, it was not exactly the microphone but a deeper problem. People at the other end had trouble to understand because as I was talking the sound kind of fading away. It’s like while taking I occasionally put my hand between the mic and my mouth and remove it.
Is it give affect to the data (loss) if you repair this problem?
You are a natural talent! It is a pleasure to watch you working. Thumbs up!
Bro can you pass me that website to buy cap and what's common cap in iPhone thanks
mouser.com or digikey.com
I have the same problem on my iPhone 6s, but sad to say i don’t have the equipment needed, so i decided to remove the caps, coil and diode using a Nail Nipper. And now i’m waiting for someone who can solder it, parts is ready i got it from AliExpress. Would you help me? I’m from Philippines. Hope you will notify this thing. HAND
how do i get replacement chips to buy? like the capacitors and ic's
I buy resistors, capacitors, diodes and inductors from Digikey. ICs I order mostly from Aliexpress
how do you find these resistors,capacitors and diode on digikey website. is there any part number for that ?
@@vjwadhwa1 sts telecom posted a video for that
What temp and Air was you using, i always find myself having to use high heat for caps etc which is not good
heya wen you are doing so much repair at some point you learn pretty fast what it is the you most problebly have to fixs
I need get 2 of my Moto X2's REPAIRED, how do I send them to you, from India ?
Perfect well made repair video.
hey you areally a master in those repairs!!! i've also same back light not working on the 6s therefore i would like to try my own the repair what is the air solder temperature you use?
thanks
Hello, I'm with an iPhone 6s with the following defect; when it turns on the Apple logo appears apple and erases only getting the backligth on, when it updates it from error 6. Do you know what can be happening?
NAND
I learned a lot here, thank you bro
Can you show a video on PMIC removal and replacement installation. Not easy but I think its a marking of the PRO.
Thanks for the explanations and the good video. Very appreciated.
Excellent video Jason as always , and thanks again for editing video
I have been in the paintless dent removal for 18 years, i tragically lost my wife last year and started replacing iphone screens as well as samsungs,( trial and error just figured it out) . I watch your videos quiet frequently and would really like to excel in logic board repair. im raising my two kids on my own and would like to progress in micro soldering since i cant chase storms any longer because i have to raise my kids. Im very passionate about Apple products and was wondering if i could maybe chat with you , it would be greatly appreciated, thanks so much!
Todd Smith ( The Phone Guy )
Nice guide good explanation
Hi, hope someone can help me. I have an iPhone 8 with backlight issue and a donor iPhone 8 board (intel). 35, 37 and 39 are normal value on J5700. R5733, R5734 and R5735 are good. D5661 and D5660 are ok. All backlight capacitors are normal.
Just in case I have swapped R5733, R5734, R5735, D5661, D5660 and U5660. The donor working fine with those parts that I have taken out from the other one but the phone still has backlight issue with the donor's parts.
Any idea, please?
Is your board water damaged?
@@TheDavid598 No, it hasn't any liquid damage.
Thanks for the fix, please keep posting your work.
Is there a way I can send you my girlfriends iPhone 6s to you to see if it can be repaired the image does not show up on the phone screen but when I plug the phone into a tv the image shows up on the tv and I am able to look at the tv and then touch the phone screen and use the phone
PLEASE I NEED HELP ASAP!
My volume buttons stopped working so i decided to repair the phone my self. I have repaired iPhones before. Before i disassembled the phone i made sure that the phone was turned off and i removed the battery before i removed anything else. After replacing the volume button i put the screen back on to test the volume buttons however the screen didn't light up. eventually the screen lit up but every time i put the brightness up on my phone it goes extremely dim. is this a backlight problem or is it something else? please i need help . Thanks.
Sweet thanks for the tip on my big component removal. I needed to add the hot air in the mix.
Iphone 7 erro 56 na restauração ? Oque fazer.?
How much would it cost to repair that front glass
Donald Ellett if you're experienced and can change your screen on your own for an iPhone 6. Anywhere from $18 to $50. If you have someone else do it it could be anywhere from $50 to $200
Hey can anyone help me? I was just at nigh repairing my phone and I used the front camera, then the white flash came up and then the phone shut down. It didn’t really shut down, the screen didn’t work. I tried another screen and that didn’t work. I tried another battery, but the flat battery symbol only came up. After charging, the screen goes blank. I think it was a screen I bought from bee fix. As soon and I plugged the battery in, something started to spark on the phone
very nice job, im thinking of doing a mail in repair hope u can fix. a very clean job!!!! subbed
Can you fix my 6s plus please
I have an iPhone 6s with a broken back light and I need someone to fix it so if you can contract me through here and work something out it would be great
Hi jason Love all your videos very informative keep up the good work
I changed the filters and it still does not work
Awesome videos! Where can I find those schematics here in the UK? Thanks
Thank you. I use Easy Draw from UnionRepair.com & ZXW tool that I purchased from microsolderingsupply.com
STS Telecom thank you.
I like your workbench with the BIG screen that shows all schematic. It awesome. The question is: how did you get all those schematic. Apple don’t provide them. They like to control everything. They don’t want to share the repair business.
Marco Polo thank u. I think employees must leak them out or something. Some of them I find on Google but for the most part, I access them using software purchased from China. The data is stored on servers in China (I think). It amazes me that these companies are able to sell subscriptions to the data without getting shut down.
I need a online classes for schematic reading trouble shooting the mother board
Hey bro i am from India and i like to watch ur videos you are very friendly and good technition..
Thank u..
Nice job. Thanks for sharing your knowledge!
Just like in the 6 series then? I thought the 6s was safe from this failure... nice video jason, you're the man!
Friend! Excellent your video! Do you like to use the continuity or ohms scale for these types of measurements?
Hello! Help with the problem disappeared sound on i6 has changed U0900 and U1601 and there is no sound. Thank you
I found this when i used to repair consumer electronics, stock typical faults were 90% of the repairs, 6-7% were oddball ones that made the brain work, eek :-D.
There was a tiny 3% that could not be repaired, i had to remember not to blame myself for such a minor amount of failures.
Nice work ! At what temp u worked with the hot air station
Thank u. 390C @ 40/100 air flow
Nice work Jason 👍👍👍💪💪 good job my friend
No reHot CPU bro today? Thanks for the great knowledge :) I hope to have some easier iphones come across my bench soon
Very good video. O hope that you continues doing. Happy new year to you and your family. God bless you.
Yo so I got this iPhone 6s, and the problem is that when I turn up the brightness, the backlight goes out.So then I turn the brightness all the way down, reset it, turn it back on, put it to sleep and then wake it again and then finally the backlight stays on, as long as I don’t turn up the brightness. Do you have any idea as to why this might be? Or does anyone? Appreciate it!
Arturo Rojas sensor maybe
respect from morroco
Great video again!! Really appreciate the content and the effort you put into this.
Where do you buy your chip sets
Iphone 6s ringer solution pls
Realy like your videos! I have a question. Can i replace on 6s backlight glass diod with a backlight diod from iphone 6 (i can not find the glass diod localy)?
Iphone light ic and coel hiting problam
IPhone 6 no display and no light New mobile change display ic same problem check all parts ok ?
Solution ???
Doh
Had a good/bad day learning, my first s6+ backlight filter was a success then i tried s6+ u3200 chip but lost a pad removing it :( may be a jumper option but im still waiting for ZXW from china
You recording via USB from camera or HDMI?
Tengo iphone 6s con fallo de sensor de proximidad en pcb.podrias hacer algun video de alguna posible solucion?saludos
Way iphone 6s light ic and coil hiting no backlight sir half me
very nice
Sir I have one dought iPhone 7plus home botton finger not working.. I need solution sir
you a the best !
Thanks for the Video !
Veri nice maybe i tray your metod
good job bro
Hi I just bought an iPhone 5s unlocked from someone and they gave me everything but when I opened the phone up. I saw that the digitizer looked like it was corroded or burned by something. So I scratched the corosssion off and then looked like the solder fell off of the pins. Can you fix this for me. It's not botched or anything but I don't know if it needs to be replaced or fixed. Pls help
When u put my multimeter to my battery, it reads 2.40 and doesn’t go up or down. When I put multimeter to ground and contact near battery connector and it reads 1.72 and doesn’t go up or down? What’s goin on? My phone won’t turn on or charge. Please respond I’m begging u
Good job! Bro Thanks for the Video !
How much cost this job?
You are the only master.
thanks for the video man !! specially the PLEASE BRO SOLUTION :D
Very good
Please help me
brother you give training
Good job! Bro!
Thank you for the Video
do u need update for zxw? i have 2.5version can send to your mail, note me that
teach us how to actually deal with heat , i mean when i fix some peace lets say charge ic , i use 2 coins and tape allover the place scared to re flow other stuff that i dont want to, i actually dont know when it is a too much heat or too less idk i am practicing but not giving up :D
Great video thanks for sharing
Good job,I really need a microscope
Hey I’m first! Nice job Jason
Thank you :-)
Been so long I haven’t mounted a computer. Almost 20 years now.
Goooood جيد
If all technicians were as humble as you we'd all be way more employable and or future proof lol
Guys, dont fuck up the sticker hahhahahaha
White lines appear as the brightness is increased in iPhone 6
nice logo sir
right off the bat i see looks like a long screw damage where u was working at :)
Naic job man
Nice
Not funcion.
Flux Capacitor...
Stickers matter!
Hi
Dam good solution
jason I amm used to watch your video most of your video about backlight and no image make other video
What a stupid video title once again - and no it’s not catchy
+aqib2000 catch or not, the title of this video is EXACTLY what happened to this phone. A capacitor shorted and backlight went bye bye rather than someone screwing up a screen replacement.
Please bro solution lol