Giulietta no comms with EPS (Electronic Power Steering)... Fault finding and repair.
Вставка
- Опубліковано 22 січ 2022
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
I know... it was too easy... still, thought would share it with you all...
Car came with ESP light on, and no power steering at all!
But like always, there is a story...
Follow me on this video to find out what was the problem and how to resolve it.
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching! - Авто та транспорт
Thank you fixed my problem because of you. Wife said go to garage all fixed cost £1.15 amazing content.
☺️
👍👍👍
They must have connected positive jump lead through power steering stud by mistake and that could have caused this as lot of time people don't pay attention how and where they connect those jump lead clamps. Impressive video and simple example of basic check.
A very plausible possibly...
👍👍👍
You did your due diligence Luis and it made for an easy diagnose. I just wonder why a " garage " with a fancy snap-on scan tool has no knowledge of basic diagnostics. That fuse only blows after hooking up jumper cables plus to minus with the ignition off. They could have been in a lot of more trouble if the ignition would have been on. Nice video Luis. Again showing the basics of diagnostics that is so often forgotten.
😊
👍👍👍
I can't thank you enough for this video I had same issue along of time and money saved ❤
☺️
👍👍👍
This is exactly what was wrong with my car. Thank you very much for the video
☺️
👍👍👍
The video is excellent! Thank you for deciding to share it with us!
😊
👍👍👍
Luis on high level diagnosis like usually! 5 stars ⭐️ for you Master!
😊
👍👍👍
I followed your advice and changed the fuse. It didn’t work took it to a friends garage and put it on the diagnostic tool. It came up with all those fault codes so I started with the cheapest option and ordered a new ABS sensor for passengers side. Got that fitted and all codes cleared thankfully it wasn’t a steering problem. Great video nevertheless thank you
☺️
👍👍👍
Could be I wasn't paying attention before but I noticed commercials on your video today for the first time-congrats on getting paid for your efforts.
If it's been going on for a while just chalk this comment up to old age.
😊
👍👍👍
Excellent job Luis!!!
Thanks!
👍👍👍
Indeed totally agree with you, basics shouldn't be ignored😉
Thanks for sharing Bro Stay Safe👍
😊
👍👍👍
Thank you for sharing your knowledge, I am not a mechanic but I was able replaces the same fuse and solved my problem without even taking the car for any diagnosis.
Thank you for your knowledge ❤️
That's great!
👍👍👍
This helped me and saved me alot of money. I even bought a new attery but this was my issue. Thanks alot
☺️
👍👍👍
Had the same issue with the same blown fuse so thanks for helping fix the problem 🙏
😊
👍👍👍
Your method of diagnosis is actually amazing.. I watch every video. How would I go about getting a car booked in with you as I have a car that 4 places cannot fix. Look forward to hearing from you. Thanks
Hello louis, i like your method of diagnostic thanks for this video
Thanks!
👍👍👍
Thank you very much and I solved my car problem with your video
That's great!
Thank you for watching and for your comment!
👍👍👍
Good sound advise buddy as always 👍
😊
👍👍👍
Thank you! This video helped me a lot
😊
👍👍👍
You sir are a genius. 😎🔧👌🏻
😊
👍👍👍
Great video. Might be an intermittent short to ground on a rubbing wiring harness causing the fuse to blow if it happens again. Look forward to your next video :)
Is a possibility...
Didn't came back so looks like my first theory was possible correct...
👍👍👍
Before replacing an 60 amps fuse allways check resistance of the cable if there is a short to ground else there is a big risk.
👍👍👍
Wouldn't the fuse just blow again
@@pk6336158 yes
What fuse was that have same problem very good video.
Very good tips, thanks.
😊
👍👍👍
well done, always the simple things first .. yes😊👍
Absolutely!
👍👍
Nice one Luis :). Must have been some massive electrical impact blowing that big fat 60 amp fuse.
Indeed...
👍👍👍
Top work
Thanks!
👍👍👍
Yes always check the power and ground and start at basics first like Iven says aswell
👍👍👍
Last week i had a Cadillac from a garage having imobiliser problems (my work is everything what has to do with immobiliser and ESL ).
The battery of the car was replaced and before it runs without a problem.
I asked the garage what they did, and they had scan the car on DTC's and found the immobiliser DTC.
They delivered the car and a few hours later i start working on it.
First thing i do is turning on the ignition and look at any immobiliser light or screen message.
There was a screen message key not recognised.
I check if the transponder from the key is readable, it was. Then i checked the reading coil on the ignition switch, that will activate when you turn on the ignition. and it didn't.
Next thing was looking at fuses and found a faulty fuse.
15 minutes of work... I realy don't understand that mechanics don't go deeper or get educated into diagnostics and fault finding.. Some of them lvining in the stoneage i guess..
on the other side, i earn money on those guys 😛
I printed a complete diagnostic scan report and the find&repair report and brought them the car. After reading the report, he just said "Ok. thanks and till next time, your doing good jobs for us"
i was a little bit stunned..
😊
Electrics "scare" some people... I guess...
👍👍👍👍
Nice video !!
Thanks!
👍👍👍
Bom trabalho sr.luis abraco🤗
Obrigado!
👍👍👍
thank you 💙💚💙
Now you have to teach everybody that trick mit the Snap and the clean Terminal.....i want to do the same that quick :-)
😊
👍👍👍
dont you just love when its just a fuse a local garage called me to look at a nissan rear lights work no front lights or switches illumination they said checked all fuses 2 fuse box under bonnet 1 under steering wheel and 1 in n/s 1/4 panel got there and had a think and trust no one start with fuses found 2 blown easy ? thanks for a nother video
😊
Indeed!
👍👍
Awesome👍
👍👍👍
They probably jumped the car with clamp connected through that fused wire. When it blew the fuse they moved it to the starter cable. Simple fix crazy the other garage could not do Simple things.
Most likely was exactly that...
😊
👍👍👍
Thanks for this great video sir, would you please tell me what is exactly model of your maxisys model??
Hi
MS908P
Thank you for watching!
👍👍👍
Por vezes achamos que só nos calha as dores de cabeça e como tal passamos o básico para segundo plano...
Bem verdade...
E eu sou culpado de o fazer algumas vezes...😋
I love you! 😘
😳
👍👍👍
Strange tendency........the cars in the later videos have more then 1/2 full tank......hmmm.......new customer? :)
Coincidence.. I guess...
😅
Boas Luís.
Tenho um guilietta igual a esse e está com a direção um pouco dura, a direção "original" é mais leve.
Não tenho nenhum erro no painel.
O que poderá ser?
Obrigado.
Difícil de dizer... verifica conexões etc... pode ser o motor a ficar fraco também...
Vê também rótulas de direcção, etc... tudo influencia...
👍👍👍
Obrigado 👍
What’s the diagnostic equipment you use mostly
The Autel MS908P... is my to go tool...
But obviously, depends on the job...
👍👍👍
Great video , i have a grande punto abarth the steering seems fine but have intermitent errors when starting asr not available and hill holder not available , the scan give to me C0051 error some say it could be the wheel sensor , others steering angle sensor. What could it be? Best regards
Live data should clear your doubts...😉
👍👍👍
@@LMAutoRepairs i think my machine cant do that , is a bit more basic
Unfortunately that's what you probably need next, is going through live data and see if there is anything out of the ordinary...
👍👍👍
@@LMAutoRepairs need to send it to a specialist ;) thanks anyway
@@LMAutoRepairsi did live data and the clutch switch is stuck in open position i removed and tested it and seems fine any idea what could be ? Best regards
Hi Luis, please let me know how to contact you or get a car booked in. Really struggling and think only you will be able to find the fault. It’s a Toyota IQ 2009… car starts and runs, however dashboard is like a Christmas tree and no communication to any module expect the airbag. Very odd as like I stated before 4 places could not fix it. Please let me know if you can help.
I do this as a part time, as a hobby if you like...
If the car starts, that means there is internal communications between modules, otherwise, the immo would not allow the car to start...
Start with the basics, power and grounds to the modules, then communication lines...
👍👍👍
My car is doing same replced fuse steering works fine but still steering at a wrong angle and shows steering corrector unavailable, esc unavailable, and hill holder unavailable what should i do please let me know...
Thanks in advance
Have you done the calibration?
👍👍👍
@@LMAutoRepairs no how to do that i have just tried steering left and right thing
I would have it plugged into a diagnostic machine to scan, and calibrate...
👍🏻👍🏻👍🏻🌷
Thanks!
👍👍👍
I think when they jump started it they blew the fuse or that cable that they didn't route probably
Indeed...
I am for the blowing during jump starting...
👍👍👍
11:46 ,hahahaha surprised
😅
Why do they call it steering corrector
Italians...🤷♂️😋
👍👍👍👍
With your ability why are you working night shifts? You should be at cars full time charging £30 to £40 per hour.
😊
👍👍
Yet again, clowns jump starting a car off from the wrong side of a fuse. They need charging appropriately. Idiot tax needs to be levied 😁
🤣
👍👍👍