Revell: Ford F 150 Raptor Part 1 Prep and Prime
Вставка
- Опубліковано 14 сер 2015
- Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by UA-cam Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites - Авто та транспорт
Snap kit! I didn't think they could look this good!
Great tutorial, This will come in very handy. Thanks.........JIM
Nice kit :)
I have been building model kits off and on for 40 years. I I have used most of the techniques you use but never owned an air brush. I have always had great luck with testors model master rattle cans. Recently I have started doing custom builds where I have to use parts from several different kits as well as aftermarket cast resin parts to build one tricked out vehicle. I would love to see you do something like this as it is a lot of fun but can also be a bit frustrating trying to locate the parts you need.
My current project is an Early Ford Bronco as built by Velocity Restorations. I started with Revell's new Baja Bronco then added suspension parts, roll cage, wheels & tires from Fireball Modelworks, the Coyote Motor, seats & Brakes from Revell's Mustang GT, mirrors from Mobeus' 72 ford pickup and various detail parts and accessories from Shapeways.
Great tip on marking the panel lines. What grades of sanding sticks/paper do you use for their removal?
Colonel Reb's Scale Models I think the stck is arround 300 then some 600 sandpaper
wich airbrush do you have? and do you know a good site with good airbrushes but not so expensive?
Hello. I just wanted to know the exact reference of this kit and on what scale it is ?. thank you.
excellent video. I just started this same kit a couple days ago. Are you using sealer since it's molded in red?
playzwtrux Nope , just the Zero Primer
Hi, I have a question. But first of all, thanks for the great videos. You really inspired me to get into model cars again, and i recently finished my first project, a 69 Camaro. It's not perfect, but quite good for a first car I guess. I'm now working on a 1970 Challenger. My question: How do you paint the inside of the body? Not the interior, the... Well. Inside of the body :D Do you just keep it like it came out of the box? Or black? Or matching to the interior? I hope you know what I mean.
Greetings from some guy from Germany :D
Der Eggad Some times black sometimes interior color. I mostly do it with a brush. Sometimes its a seprate piece then i will do it with the airbrush.
Okay, thanks! :)
What music is that? It sounds so familiar.. Great stuff as always.
***** Its all from the UA-cam audio library, so maybe you know it from some other youtube video's
Right on. I know it from an actual song. Sounds like some old seventies music. LOL Look forward to seeing how this one goes. Are you going to get the 2017 Raptor Snap kit too?
+dcinhere lol!
When it comes available from my supplier ill get it yes!
Not cutting out the windshield wiper over plastic?
Steve Watts This is just a quick build, so not getting in to super detailing it like that, all will be fixed during painting with some different shades of black.
Tom, I am starting this truck today. About three weeks ago I wasn't even interested in modeling and one of your videos popped up on my YT feed and I thought your work looked so cool that I had to try it. I bought most of the items you recommended and got started. I just finished my first model and posted pics here where I gave you a tip of the hat too. www.modelcarsmag.com/forums/topic/132897-finished-my-first-model/
Thanks for all the great videos and instruction... I couldn't have built my first one without all the tips I learned from you.
Fantastic result for a first build! Keep em comming!
Hey Tom, I just finished this one and it was perfect for the second model as you had some side bar tutorials with this one. I was able to do the wheels like you did and the windshield. I'll stop harassing you with my builds after this one but since I posted above that I started it I figured I'd let you see the results. Not nearly as nice as yours but I learned a lot from you on it so thanks! This link should take you to the post with the pics.
www.modelcarsmag.com/forums/topic/132897-finished-my-first-model/?do=findComment&comment=1935739
Jem7sk looking good bud. I like the flatt red color ;)
Did you tinned the primer?
No
That stand that you use to hold the body, what is it called?
tamiya spray stand
The Scalemodeling Channel thank you
What PSI are you using to spray?
35