@@MarkBates-y9q yes. Not immediately, it still had a weird behaviour, like turning on/off by itself, so I had to let it try for a couple of hours as I already closed the battery lid and I was not in mood to unscrew again all those screws, lol. Guess I should have used the hairdryer more. But now it works just fine. SO probably use the hairdryer more than 2-3 minutes as I did.
I ended up putting a freezer bag around the new controller board before reinstalling next to the battery. I poked a small Hole in it for the wires to flow through. I have 2 flat tires and don’t run it often but so far no issues.
Yes, it can be the control board, but it could also be the on off button that became moist and must to be clean. It is better to try the button first... turn off battery connectors, disassembly the dashboard, detach the button, clean and send the metal plate (The one that makes the click), mount everything again and test it. Only if doesn't work go and buy a new control box.
Mine is having the same problem like turning on and off I’ve seen videos and opened the bottom side connected properly it was fine for few hours and suddenly it started again can anyone help me with it?
I am experiencing the same problem now.. mine is not turning of and up until now the lights are on since morning. shall I just leave it and not charging..?? Please let me know what to do.. first time experience..
@@paularcenio5420 same mine is turning on and off by itself now it’s not that much before it was consistent still Is sometimes I think it’s controller issue
Hairdryer did the trick for me. Make sure you keep it on cold air, not hot.
Did it work mate
@@MarkBates-y9q yes. Not immediately, it still had a weird behaviour, like turning on/off by itself, so I had to let it try for a couple of hours as I already closed the battery lid and I was not in mood to unscrew again all those screws, lol. Guess I should have used the hairdryer more. But now it works just fine. SO probably use the hairdryer more than 2-3 minutes as I did.
I ended up putting a freezer bag around the new controller board before reinstalling next to the battery. I poked a small
Hole in it for the wires to flow through. I have 2 flat tires and don’t run it often but so far no issues.
Yes, it can be the control board, but it could also be the on off button that became moist and must to be clean. It is better to try the button first... turn off battery connectors, disassembly the dashboard, detach the button, clean and send the metal plate (The one that makes the click), mount everything again and test it. Only if doesn't work go and buy a new control box.
Mine is having the same problem like turning on and off I’ve seen videos and opened the bottom side connected properly it was fine for few hours and suddenly it started again can anyone help me with it?
Exactly the same for me. Do you find the solution please ?@@prottaybarua2496
have you take a look at the switch on the top of the handlebar? corrosion occur in this area and you lost contact something is shorted somewhere
@@Evilslayer73 I had to replace that board as well prior to this repair
I had the same problem for a few months and was resolved spontaneously without doing anything. Probably it was related to moisture.
I am experiencing the same problem now.. mine is not turning of and up until now the lights are on since morning. shall I just leave it and not charging..?? Please let me know what to do.. first time experience..
@@floramayreyes6448 just open it and dry it with hair dryer, thats what ive done and it seems to work
@@homerds200Bro i never opened it do i open the under thingy and blowdry right?
my scooters goose neck is foamed with an insulation. why yours is not?:O
Yo how would you repair, the power pins that connect the power cable to the charging port? One of mine has broken off
If u wanna do it urself u can buy a new motherboard for around 40bucks that probably the easiest way to do it urself
Yes i also have this problem
I fix it myself by opening the motherboard apart and clean it by using hairdryer and putting it in the sun
Ugyan ez a probléma velem is csak nekem nem kapcsol be és elkezdet cikrázni a controler vezérlő panel kábel
Hi
What allen is used to open the bottom?
I mean the name and size
Tt10
Mine just turns on flashes a red tool symbol and then just dies
I cant unscrew the screws cause they are rusted and bent, what do i do
@@RandomMomentsFr drill them out then glue back
i have the same problem it want turn on
i have the same problem
I cant turn my off and keep says beep beeep beep
Did you fix the issue?
Yes. The issue was resolved with a new lower control board. I sealed it with heavy duty plastic and packing tape
@@The1deaguy i am having the same problem with my mi scooter m365. Thank you for your video. I hope I will be able to fix my scooter as well 🤞🏽
@@taratidelamere-broughton890 did you fix the issue??
I need help myself
@@paularcenio5420 same mine is turning on and off by itself now it’s not that much before it was consistent still Is sometimes I think it’s controller issue