To answer the most common questions in the comments section: 1.) Quality videos like this take a lot of time to produce. This and the next took me over 300hrs. 2.) Follow me on Instagram "ChrisFixit" for daily updates and tips and tricks. 3.) The exhaust on the car is the performance exhaust, just used on the track. 4.) The speedometer is fine... it spun all the way around at the last drift event and I havent had a chance to take the gauge cluster out and push it back to the other side of the peg. 5.) The other red Mustang is from this video: ua-cam.com/video/N-exs1iMLFU/v-deo.html
I never safely worked under a car until I started watching your videos, just like you my mother is supportive of me working on my cars. Its nice to know she wont be as scared of me being crushed when i'm safely working under the car. Thank you for waking me up, and please continue being genuine.
Truthfully Chris the only reason why I watched this video is because I had the same problem done to me on another car I have(note I just had a bad bearing)
@@LaberNater ,,He is obviously a skilful engineer to work on your vehicle. The man is so pragmatic and detailed. I think practically & theoretically,, he's unmatched.
A year ago I'd never changed my own oil. Today I completed swapping an engine. Yes, your videos are that clear and informative. Had a pretty good sized hole in the block (sorry, Arizona, for leaving a rod on the side of the road. Oops.) You're an incredible teacher. Thanks!
This is why I drive automatics. Lol good work Chris. My dad and I replaced his clutch on a late 90s camaro. Took like 5 hours but we were a 33 year old with bad eyesight and a distracted 14 year old who just wanted a wataburger when we were done. Also didn't have a transmission jack. Dad was benchpressing the transmission while I shoved it forward to install. He knew what he was doing, but I lacked the skills to be of any real use. Wish I would have taken it all more seriously at that time and appreciated the time spent together. Thanks for the memories
That's honestly a hilarious picture you paint, I can just see it. My grandpa used to be a mechanic and apparently his relatives where staying with him and their car had something wrong with the transmission. He said they got into a fight and he went out and removed and replaced the transmission in like 2 or 3 hours and told them to leave. If I remember right they kept eating food they bought for their three kids and they weren't exactly rich.
Honestly what amazes most about these videos after watching a few is how he gets the camera right where he’s explaining. It could be the smallest gap or tightest spot but he gets that camera there to show what he’s doing. Magic. Simply magic.
I absolutely adore the fact that you cover all steps, even if you already did another video on it. You have the highest quality content I've ever seen. No joke.
Hey Chris, it’s Chris. I’ve never worked on cars nor do I plan on it, however I watch every single one of your videos and here’s why. It gives me knowledge of automobiles I ordinarily would not have. I then take that knowledge to the mechanics shop and I’m able to have conversations about my vehicle where I seem like I know what I’m talking about preventing me from being taken advantage of! Thank you for this! Just wanted to chime in and let you know that there is a tremendous amount of value in what you do even when some of your audience will never work on cars. Thanks buddy!
@@Kevin-wy8kc doubt its phony. Even those that work on cars a bit will have more knowledge. I dont plan on taking out a fuckin tranny but hey i got some info on it.
this guy is seriously the best. tutorial vids are usually harder to make than most youtube videos because they have to be thorough and detailed while also not being concise by showing the most important parts and not simply showing a 6 hour long video. chris fix has NEVER failed to deliver. and he always goes the extra mile to lay out the parts and explain what could go wrong and what could be different with different cars.
The mark of a good video maker is the inability to click away. I didn't intend on watching a 28 minute auto repair video at 1 am but that is what happened. Good video as always Chris!
ChrisFix it really is, it’s that type of quality that makes me watch your vids apposed to other mechanics. Gives me the best breakdown for what I should be looking for
That was one of the first things I noticed about this video lighting it perfect the angles are great. I can’t even imagine how long it would take me to do that and he replaced a whole ass transmission while doing it. That’s talent right there.
I had fun doing this a few years ago for my 94 Mazda B2300. Clutch went out, and I had barely any money so I did the whole job with a few harbor freight sockets, extensions, torque wrench, and jack stands. Everything else was by hand, I had to lay the transmission on my chest and knees to get it off and on. Even used the truck's jack to lift the truck because I didn't have a proper jack at the time. Really taught me how much can be done with simple hand tools, and I haven't been scared about any other repair job since then.
Hey ChrisFix I just wanted to say thank you, sincerely. My 00' Mustang sat for almost 2 months in my friends driveway (My first car and I really have affection for it haha) after we saw your video on how to replace a transmission we decided we would give it a try. None of us (three people counting) has ever done such thing, the most we have done is change a motor oil, but thanks to this video and the sequel of "How to replace a clutch" we were able to fix my car this sunday January 20th, after 10 hours of hardwork, blood and sweat we replaced the clutch, pilot bearing, throw out bearing and fork. So for any of you wanting to attempt to fix anything on your car, ChrisFix's videos are the way to go they are so detailed that is impossible not to do what it says. Thanks for all the effort you put on your videos ChrisFix it was really helpfull! Ps: We would've finished in less than ten hours if it wasn't that cold that day 22° haha.
I know this is 2 years old, but I gotta say, all your videos and your energy is phenomenal. You make things so accesible and easy for your average DIY-er. Mad respect for all you’ve done!
The angles and editing on this video are second to none. I’m amazed at the quality and attention to detail especially with it being so short. Awesome job!
ChrisFix no thank you and this is not just from me but from everyone who has seen your videos to help us fix our vehicles. Happy New Years Chris and to your Family and well let’s see what new projects will come this 2019.🎆🎊🎈
Darren corbit, I totally agree. It's not uncommon for people to be capable to remove a transmission in 30 minutes. Putting it back in is a different story though.
@@jdogmcnasty1980 the editing, yes. But still fun to watch him squeeze the whole process into less than 30 minutes (even when done by the power of editing)
Extremely comprehensive video, well done as always. If I was a high school or even college automotive shop teacher I would show this video as a how to guide before any practical work was done. Thanks.
Chris Fix makes the absolute best videos on how to repair/replace things on cars! No one else takes the time to get the important camera shots of connectors and sensors as Chris does and that makes the biggest difference for people who don't normally work on cars. You are the best mechanic on the internet! Thank you so very much!
this video is a great example of how much commitment pays off eventually. I'm a beginner mechanic and car enthusiast & I'm a fairly new member to the Chris Fix channel and i can't wait to catch up on all 300 videos to expand my knowledge on cars and mechanics, great learning channel, can't wait to see this channel grow bigger than it is today and this time be a part of it and grow along with Chris. Layton here, in South Africa.
Your enthusiasm while fixing cars makes your videos so much more fun to watch! You also inspire a lot of confidence. Although when it comes to me, the repair usually takes 5x longer and there’s a lot less enthusiasm and a lot more swearing involved 😂
I completely agree! I had a suburban for years and replaced the tyranny twice! It was also 4wd, so a lot of words came out that my kids shouldn't hear, lol!
I will likely never be able to do such complex repairs, but your videos have given me a more realistic understanding of how the components of my car,not only fit together, but how they work. At the very least, I am much more knowledgeable when talking to my mechanic. It's much harder to be taken advantage of if you have a better idea of how things work. Thank you, you are a great teacher!
@user-od1bs4yi6m the person that wrote that comment is probably similar to my mom who is not very mechanically inclined and they may also just not have adequate spacial reasoning to figure out where things go
@@Neo-l2g --Your comment kinda seems like a weak insult about both me and your mom. I am likely old enough to be your mom, but I think you'd be surprised that I have literally spent decades teaching others to manipulate objects in three-dimensional space. I would likely never complete such complex car repairs, not because I don't understand the mechanics, because it would require a complete retooling of my workshop and time that I am not interested in using for that purpose.
@missbluepants888 well then if you dont want it to seem as though you are unable to do the repair due to lack of understanding, i suggest removing "such COMPLEX repairs" and replacing it with "repairs that require such TOOLS." also it seems pretty clear that my comment, while maybe crass, does not spew any legitimate insult. this is also evident by the reference to my mother, whom you can statistically assume i have a good view of as most people do (of their own mothers). if i did wish to insult while including my mother, i would say someone along the lines of: "like my mother, you are incredibly sensitive and appear to look for excuses to defend yourself, although i wouldnt imagine my mother doing that to a stranger online." good day
2018: How to spray paint your engine bay 2019: How to remove your transmission 2020: How to build your own 8 second dragster from scratch 2021: How to replace a broken turbine on a Boeing 747 You're killing it with that evolvement chris✌🏻😂
Thanks a lot! YEa it takes foreverrrrr but so worth it because each video is the best for its specific topic and can be used for years to come by millions of people! Most people wouldnt spend 300hrs on a video for UA-cam haha.
Can we talk about 19:50?! I literally take breaks after doing something like that other wise I get way too frustrated. He put a camera inside! Meaning possible trial round, mistake round if it wasn’t recording, the actual video you see inside, the video you see outside, and possible another so he can fully master it. If y’all don’t appreciate how hard it was for those 10 second of footage
Carl, if you follow him on Instagram you'd see the different challenges he went through to get this video done. Anyone else might have thrown in the towel but he kept on grinding! He's living proof not all heroes wear capes. I love me some ChrisFix! 😊❤
Hi Chris, I have used your video now three times over three years to change clutches on different cars of mine. It is great to go back and revise things I’ve forgotten. I never would have attempted this type of task without your tuition. Your video is a complete course. Thank you.
@@chrisfixMy dad and Grandpa always made it out to be like doing these types of things as a big process and too complicated. However, the way you break everything down into small manageable steps and you do it safely with the right tools, makes it so much easier to do! Thank you so much!!
You can use the Amazon links to either buy whatever product he's linking to, or any other product that you search for yourself for that matter, as long as it's through the link he provided. He'll get commission on the sale. I'm trying to do that, but I'll need a bit of time to get to the same number of subscribers haha XD
Whenever life gets rough, watch ChrisFix swap a transmission. Great work man, my jaw was hanging through the entire video. No way i'm crazy enough to do that kind of operation on my car though, but what are men if they don't dream right, Lol. God Bless
Nothing here was a surprise, I’ve actually done it decades ago, but I’m kinda nervous. Much more confident seeing you go through it like this, even if my car is a bit different. Thanks for all your fine work, and wish me luck!
Great idea of getting a transmission jack. I took out a duel range hydromatic transmission from my 1955 Cadillac with a floor jack with a small piece of plywood and the transmission sure enough rolled off and pined me and a helper under the car. Those old transmissions are like an anchor for the passenger ship the Queen Mary.
I've always feared working on my car from underneath from fear of it falling on me, but you've eased my fear with the methods you described. I love you Chris.
tribulation138 and most backyard mechanics are far smarter and more creative than the certified ones It would have taken Chris like 1-2 hours if not more to replace the transmission whereas typical certified mechanic would have taken 3-4 hours
You explained in great detail how to replace a transmission in only 28:24. My old high school auto teacher took a month to explain this by making us take notes and we didn’t even get hands on practice. I’ve learned more about cars because your channel than I did my whole 3 years in an automotive class in high school lol. I just got to say, thank you!
@@11Kslingshot I attempted this same operation on my 65 corvette when i was in college, and rather than those nice 3 ton jack stands Chris uses i just pulled it up on a curb to give me a little clearance..finally i dropped the transmission out- RIGHT ON MY CHEST!...was pinned underneath the car for a while, finally wiggled out, got my new clutch and pressure plate, put it all back in, got in the car started it, let out the clutch - nothing!..found out i had gotten the wrong throw out bearing from the parts store..i swore never again!
@@billnalder1017 Holly shit! Having a transmission on me would scare the shit out of me. My worse fear is to be crushed to death while working on a car. That has to be one of the worst ways to go.
@@twn5858 bruh, I'm 14 and my dad usually makes me go under the car to do the work because he cant fit under all the way. Once I heard the jack creak and I was all nope until I knew it was aok
Certainly the BEST transmission replacement video EVER. So detailed, so much room and light so we can actually see things. Thanks, Chris. Would you maybe do a similar video on a FWD car? I would like to see the difference when you don't have a drive shaft to the rear,
So I'm a lube tech and I'm taking classes online. I'm honestly so glad I found your videos. So much better having a visual step by step and reading step by step. Thank you chris, amazing video
ChrisFix hey Chris I have a 2001 Ford F-350 that’s low on automatic transmission fluid I bought some Valvaline Mercon but I don’t know what brand of fluid is inside. Do you know if adding a different brand of fluid would hurt the transmission? Thank you
Watch ChrisFix for 5 more years. You will get to know how to make your own car so that you don't get ripped of by car companies and save a ton of money.
Chris you put so much effort into filming these guides. It's really cool and interesting. Even for someone like me that would never attempt this. The multiple camera angles and editing is brilliant. Well done Sir.
Can I ask how long a video like this takes to film. The job is probably 3-4 hours. But I bet with all the camera adjustments it must take so much longer. Thank you though.
As a mechanic myself you make these videos very professionally and so easy for people to understand what to do and how things work, thanks. Question for you, is your speed sensor inop as the Speedo didn't work on the test drive? Thanks again.
The needle went completely around at a drift event. I need to take the dash out and put it back on the other side of the pin. Third gear burnouts can do that haha.
@@chrisfix After my girlfriend's car battery died in the winter one time, the gas gauge flipped around and was stuck and I brought it back around with a strong magnet! I bet it would work for that too!!
Perfect easy application to demonstrate this on. Tons of room and simple process. No 4wd, no concentric slave, not transverse, not automatic, no special tools, no problem.Didn't even have to remove the front clip or sub-frame of the car to pull the engine/trans out or down.Seems like most of the cars I work on you have to buy/make a specialty tool, program the new part, or remove half the car these days.
Hey i watch you videos Brian and thanks you have really helped me alot and i have started a test channel myself. You already have the repair channel covered but great work
It really was an awesome car to demo with. I'll be making a video on WRX transmission replacement this year and there are at least a few extra steps. Slave cylinder, intercooler, front axles, driveshaft carrier and rear guard, plus the pull type clutch! Still, this video sets a high benchmark for tutorials. Sure beats some 5 minute explanations by other big channels. Love your work, Brian!
briansmobile1 I think he uses his head a lot before buying any special tools. It’s not that this job doesn’t require or recommend the use of special tools or extra removal.
Every mechanic in the world: "You don't want to replace your transmission. It's a lost cause, and it is far too much work." Chris Fix: "Follow these simple steps to remove your transmission. I'll hold a camera while I do it all by myself."
My ex is a mechanic specialized in transmission. Had him watch this video and he said if people actually had patience and took time to do homework on their car like Chris does he be out of work.😂 I been using your videos to help me out save $ . Then I just go boost my work to my ex when I have him check it out just for reassurance . Ladies you need help keep watching Chris!
Hey, start small. I never changed the oil myself before this summer and now I’ve done spark plugs, transmission fluid/filter, complete brake jobs, and others. I’ve already saved thousands of dollars because Christfix showed me how simple it was to do some car repairs. He’s good for seeing how to generally do something, and then refer to Haynes and UA-cam videos on your own car.
@@budweiserjackdaniels6664 That's a hard question. I knew that my dad didn't take care of my car except he did faithfully change the oil. It had 140,000 miles, so I knew that it was due for multiple routine things. Check engine lights are also helpful because the car knows something is wrong and it is telling you. I bought a code reader for $70 and it was the best investment I've made. You can fix the vast majority of check engine lights for less than $100 and it would've cost that much for a mechanic to tell you what the problem is and not fix it.
Honestly this dude is amazing...like i have no words for his skill in both all things cars and how he presents it in his videos...he's the best car repair guy on youtube period no debate. Man this was dope to watch.
This video could not have came at a better time , my clutch actually just gave out about a week ago and I've been waiting on this video because I don't trust any other video on UA-cam! Love your videos man and I respect the amount of time you put in to them for others! 😀
if someone where do make a video about the most important videos on youtube this would certainly be one them. very straight forward but explained very well and didn’t just remove the trans but showed us how to re-attach everything properly with very nice camera angles.
To answer the most common questions in the comments section:
1.) Quality videos like this take a lot of time to produce. This and the next took me over 300hrs.
2.) Follow me on Instagram "ChrisFixit" for daily updates and tips and tricks.
3.) The exhaust on the car is the performance exhaust, just used on the track.
4.) The speedometer is fine... it spun all the way around at the last drift event and I havent had a chance to take the gauge cluster out and push it back to the other side of the peg.
5.) The other red Mustang is from this video: ua-cam.com/video/N-exs1iMLFU/v-deo.html
Chris, could you please show us how you can safely put the car to four jack stands? Thanks.
300 hours? Wow.
I never safely worked under a car until I started watching your videos, just like you my mother is supportive of me working on my cars. Its nice to know she wont be as scared of me being crushed when i'm safely working under the car. Thank you for waking me up, and please continue being genuine.
Truthfully Chris the only reason why I watched this video is because I had the same problem done to me on another car I have(note I just had a bad bearing)
Soapy wooder will make it go faster.
Who else is here cause their car isn't broke, and to just enjoy the satisfaction of a Chris fix vid
Wow I did espect a heart from you Chris, cheers from Australia
i dont even own a car and ive watched every chris fix video haha
mfers voice is just therapeutic at this point honestly..
Well i'm also mechanically curious and like to know things, i've never had anybody mentor me on how to repair cars.
broke is a strong word my is "runs good".
if there's one thing I respect Chris for the way he manages to get good camera angles in the hardest of places
It takes hours to setup but I always think it’s worth it!
Its one of the biggest noticeable things about his videos. Smallest details can have the biggest effects
@@LaberNater ,,He is obviously a skilful engineer to work on your vehicle. The man is so pragmatic and detailed. I think practically & theoretically,, he's unmatched.
They make those skinny worm camera's now, they can snake in any crevices
@@StrongerThanBigfoot ,, Never heard of her but with Chris Fix you need no other help.
A year ago I'd never changed my own oil. Today I completed swapping an engine. Yes, your videos are that clear and informative. Had a pretty good sized hole in the block (sorry, Arizona, for leaving a rod on the side of the road. Oops.) You're an incredible teacher. Thanks!
Lmao. Props to the master
i saw that rod on the side of the road
@@omiofenilski9264lmaoo
RodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRodRod
@@omiofenilski9264same I am rod no. 6
This is why I drive automatics. Lol good work Chris. My dad and I replaced his clutch on a late 90s camaro. Took like 5 hours but we were a 33 year old with bad eyesight and a distracted 14 year old who just wanted a wataburger when we were done. Also didn't have a transmission jack. Dad was benchpressing the transmission while I shoved it forward to install. He knew what he was doing, but I lacked the skills to be of any real use. Wish I would have taken it all more seriously at that time and appreciated the time spent together. Thanks for the memories
I'm sure he appreciated the help! It's way easier with 2 people
One question and I'll not bug u , where did u learn all this and if it was at school, which one? Been dying to know the answer
That's honestly a hilarious picture you paint, I can just see it. My grandpa used to be a mechanic and apparently his relatives where staying with him and their car had something wrong with the transmission. He said they got into a fight and he went out and removed and replaced the transmission in like 2 or 3 hours and told them to leave.
If I remember right they kept eating food they bought for their three kids and they weren't exactly rich.
Honestly what amazes most about these videos after watching a few is how he gets the camera right where he’s explaining. It could be the smallest gap or tightest spot but he gets that camera there to show what he’s doing. Magic. Simply magic.
Thanks a lot!!!
could be using a go pro or a camera that is like a snake (can't remember correct name)
@@0Heeroyuy01 you're talking about a bore-scope :)
I absolutely adore the fact that you cover all steps, even if you already did another video on it. You have the highest quality content I've ever seen. No joke.
Thanks a lot Dylan!
What you said. I have another video he did about cleaning one's engine. I'm just going to watch his videos on a loop all day long for 2019.
@@mymusings1293 I agree man. He is art.
Dylan McNutt this is facts 🙌🏼
@@Unlucky13_s thanks man.
I watched the whole video without understanding anything about it plus I don’t have a car. He deserves my subscribe
Thanks
Dude I’m the same
You're really a patient and creative man ... Installing a transmission is actually the highest suffer for car mechanics
Especially when you dont have a lift if youre doing it as a side job etc
Not really I do it every day as my job it’s easy if you have done it for couple years I’m 26
Walk in the park for me
First youtube video to watch in 2019
Rashad Nosseir12 same
same xd
Same
It says that this video is 31.12.2018 and I live in Europe.
I watched this video as the first one in 2019 aswell
Hey Chris, it’s Chris. I’ve never worked on cars nor do I plan on it, however I watch every single one of your videos and here’s why. It gives me knowledge of automobiles I ordinarily would not have. I then take that knowledge to the mechanics shop and I’m able to have conversations about my vehicle where I seem like I know what I’m talking about preventing me from being taken advantage of! Thank you for this! Just wanted to chime in and let you know that there is a tremendous amount of value in what you do even when some of your audience will never work on cars. Thanks buddy!
really?how blatant can you be with putting out phony comments?
@@Kevin-wy8kc doubt its phony. Even those that work on cars a bit will have more knowledge. I dont plan on taking out a fuckin tranny but hey i got some info on it.
Hey Chris talking to Chris. It’s Chris!
It’s always good to have knowledge on everything. Just wanted to have three chris’s in this conversation 😂
Hey Chris... Totally agree with you.. the same here too! =P
Awesome! I am glad the videos help even if you arent physically doing most of the work yourself!
Finally a good transmission drop video with good angles
this guy is seriously the best. tutorial vids are usually harder to make than most youtube videos because they have to be thorough and detailed while also not being concise by showing the most important parts and not simply showing a 6 hour long video. chris fix has NEVER failed to deliver. and he always goes the extra mile to lay out the parts and explain what could go wrong and what could be different with different cars.
The mark of a good video maker is the inability to click away. I didn't intend on watching a 28 minute auto repair video at 1 am but that is what happened. Good video as always Chris!
Thanks a lot!!!!
Same here.. Nice vid
4:30 a.m
3:20am lol
2:10am 😁
I'm so impressed at how you always get excelent camera angle!
Thanks a lot! It's really tough and it takes a while to get shots sometimes, but I always think it's worth it!
It took hard work, dedication, and soapy wooder.
ChrisFix it really is, it’s that type of quality that makes me watch your vids apposed to other mechanics. Gives me the best breakdown for what I should be looking for
That was one of the first things I noticed about this video lighting it perfect the angles are great. I can’t even imagine how long it would take me to do that and he replaced a whole ass transmission while doing it. That’s talent right there.
Thats what I love about chrisfix
Wow I can't believe this well documented information is available for free.
I had fun doing this a few years ago for my 94 Mazda B2300. Clutch went out, and I had barely any money so I did the whole job with a few harbor freight sockets, extensions, torque wrench, and jack stands. Everything else was by hand, I had to lay the transmission on my chest and knees to get it off and on. Even used the truck's jack to lift the truck because I didn't have a proper jack at the time. Really taught me how much can be done with simple hand tools, and I haven't been scared about any other repair job since then.
Laying it on your chest just killed me 💀
I might have to do this for my 95 ranger
@@spankme251 laying on a chest sounds like it would kill a lot of people
@@wesfields9322Chest & Knees
What was the total and cost (if you can recall)?
Hey ChrisFix I just wanted to say thank you, sincerely. My 00' Mustang sat for almost 2 months in my friends driveway (My first car and I really have affection for it haha) after we saw your video on how to replace a transmission we decided we would give it a try. None of us (three people counting) has ever done such thing, the most we have done is change a motor oil, but thanks to this video and the sequel of "How to replace a clutch" we were able to fix my car this sunday January 20th, after 10 hours of hardwork, blood and sweat we replaced the clutch, pilot bearing, throw out bearing and fork. So for any of you wanting to attempt to fix anything on your car, ChrisFix's videos are the way to go they are so detailed that is impossible not to do what it says. Thanks for all the effort you put on your videos ChrisFix it was really helpfull!
Ps: We would've finished in less than ten hours if it wasn't that cold that day 22° haha.
Awesome work and glad to hear it!
@@chrisfix Thanks, you are the best!
How's the car running now?
@@Duvall9042343 clutch still smooth like butter!
@@dfq101 Great job, glad to know.
I know this is 2 years old, but I gotta say, all your videos and your energy is phenomenal. You make things so accesible and easy for your average DIY-er. Mad respect for all you’ve done!
Chris fix will forever be the reason I felt confident enough to jump into engineering
And his organization and attention to detail is amazing
now ur comment is 2 yo old :)
I don't even have a car, but is so satisfying to see Chris Fix repair it.
agreed
Same
Me2
I still need to wait 5 years until I can get a license
Same
Where can we get a transmission
The angles and editing on this video are second to none. I’m amazed at the quality and attention to detail especially with it being so short. Awesome job!
This is the perfect way to end 2018 and start 2019 with a ChrisFix video!! Can’t ask for more 😎
Thanks for the support!
Same
ChrisFix no thank you and this is not just from me but from everyone who has seen your videos to help us fix our vehicles. Happy New Years Chris and to your Family and well let’s see what new projects will come this 2019.🎆🎊🎈
exactly... and since it looks like we're steppin' it up, why not a complete engine overhaul for 2019 😃
@@chrisfix I thought you would heart my comment. But I guess not.
Very informative. Never have I ever imagined I would see a transmission replaced in less than 30 minutes...
Grant Tanner one word, editing. Chris is awesome yes but seriously, unless you have a couple friends 30 minutes is very impressive for one guy
@@jdogmcnasty1980 you could probably remove a transmission in 30 min on your own
Darren corbit, I totally agree. It's not uncommon for people to be capable to remove a transmission in 30 minutes. Putting it back in is a different story though.
@@jdogmcnasty1980 the editing, yes. But still fun to watch him squeeze the whole process into less than 30 minutes (even when done by the power of editing)
Grant Tanner well it obviously took longer
Extremely comprehensive video, well done as always. If I was a high school or even college automotive shop teacher I would show this video as a how to guide before any practical work was done. Thanks.
Chris Fix makes the absolute best videos on how to repair/replace things on cars! No one else takes the time to get the important camera shots of connectors and sensors as Chris does and that makes the biggest difference for people who don't normally work on cars.
You are the best mechanic on the internet! Thank you so very much!
Normally don't leave a comment but this video took a lot to make, so I'll show as much support as I can here
Thanks a lot man! Much appreciated!
I'll probably never do this....still enjoy the video immensely.
haha. thats the power of good content.
I’m sayin like I got a bumper to bumper 100k warranty and I’ll get rid of the car before that and I still find this interesting
@@LivDoesItDiy thats totally right
Best thing to watch in 2019 morning
this video is a great example of how much commitment pays off eventually.
I'm a beginner mechanic and car enthusiast & I'm a fairly new member to the Chris Fix channel and i can't wait to catch up on all 300 videos to expand my knowledge on cars and mechanics, great learning channel, can't wait to see this channel grow bigger than it is today and this time be a part of it and grow along with Chris.
Layton here, in South Africa.
You have to be a wizard or something no normal person could explain this so well
Your enthusiasm while fixing cars makes your videos so much more fun to watch! You also inspire a lot of confidence. Although when it comes to me, the repair usually takes 5x longer and there’s a lot less enthusiasm and a lot more swearing involved 😂
Haha
I completely agree! I had a suburban for years and replaced the tyranny twice! It was also 4wd, so a lot of words came out that my kids shouldn't hear, lol!
Oh I'm sure he's swearing. His enthusiasm only comes after the job is complete and he's sitting it is computer doing the editing and voice over.
try replacing a starter at dusk, with a mosquito infested grassland right beside you... you will curse and wiggle around like you are on fire.
@@cleaner10399 sounds sexy
This guy could disassemble the Millennium Falcon and put it back together in a day.
lol, I'm sure it's not too hard ;)
We have enough Loctite for that?
Well ofc! All he needs is blinker fluid then boom, hyperspeed conversion
@@poof2380 you mean soapy water???😂😂
He's gonna need a lot of medium strength thread locker
I will likely never be able to do such complex repairs, but your videos have given me a more realistic understanding of how the components of my car,not only fit together, but how they work. At the very least, I am much more knowledgeable when talking to my mechanic. It's much harder to be taken advantage of if you have a better idea of how things work. Thank you, you are a great teacher!
Why not?
@@MovingFoward-e9h --There are a myriad of reasons.
@user-od1bs4yi6m the person that wrote that comment is probably similar to my mom who is not very mechanically inclined and they may also just not have adequate spacial reasoning to figure out where things go
@@Neo-l2g --Your comment kinda seems like a weak insult about both me and your mom. I am likely old enough to be your mom, but I think you'd be surprised that I have literally spent decades teaching others to manipulate objects in three-dimensional space. I would likely never complete such complex car repairs, not because I don't understand the mechanics, because it would require a complete retooling of my workshop and time that I am not interested in using for that purpose.
@missbluepants888 well then if you dont want it to seem as though you are unable to do the repair due to lack of understanding, i suggest removing "such COMPLEX repairs" and replacing it with "repairs that require such TOOLS." also it seems pretty clear that my comment, while maybe crass, does not spew any legitimate insult. this is also evident by the reference to my mother, whom you can statistically assume i have a good view of as most people do (of their own mothers). if i did wish to insult while including my mother, i would say someone along the lines of: "like my mother, you are incredibly sensitive and appear to look for excuses to defend yourself, although i wouldnt imagine my mother doing that to a stranger online."
good day
I think your video on how to install a turbo will be insane
Me: instructions unclear destroyed turbo inlet
No he should put a supercharger on his mustang if he's gonna boost it. But he won't do that because he got a sport intake manifold on his mustang.
@@geometryjosh21 He could remove the sport intake. Since the power gain of a blower would blow the sport intake out of the water.
Supercharger for this car, turbo for the Del Sol!
Nah a supercharger or procharger mate
True fans watch this even on NYE
Thanks for the support!
@@chrisfix hey, whats your new year resolution?
It's jan1 for me. My time zone is GMT+8
@@lillpit09 always that one person...
GUESS IM A REAL FAN THEN
What a relief.. it only takes half an hour to change out the transmission! 👍😎👍
2018: How to spray paint your engine bay
2019: How to remove your transmission
2020: How to build your own 8 second dragster from scratch
2021: How to replace a broken turbine on a Boeing 747
You're killing it with that evolvement chris✌🏻😂
Best comment so far.
2022 : how to open your own car factory
2023: How to replace your electric car battery pack
@@Tonyx.yt. already did it on a Prius
2025: How to rebuild the hyperdrive coils in your spaceship
Chris, you should be teaching video making and editing videos. Yours are some of the best on UA-cam.
Must take forever with the change in camera angles. I know he probably uses a few but it still takes time.
Thanks a lot! YEa it takes foreverrrrr but so worth it because each video is the best for its specific topic and can be used for years to come by millions of people! Most people wouldnt spend 300hrs on a video for UA-cam haha.
Can we talk about 19:50?! I literally take breaks after doing something like that other wise I get way too frustrated. He put a camera inside! Meaning possible trial round, mistake round if it wasn’t recording, the actual video you see inside, the video you see outside, and possible another so he can fully master it. If y’all don’t appreciate how hard it was for those 10 second of footage
I installed and removed the transmission 4 times lol. That scene took me the whole day to film the inside shots and outside shots.
Carl, if you follow him on Instagram you'd see the different challenges he went through to get this video done. Anyone else might have thrown in the towel but he kept on grinding! He's living proof not all heroes wear capes. I love me some ChrisFix! 😊❤
That's why your videos are a real pleasure to watch. Well explained all the way
This is a way underrated comment
Now someone please put Interstellar docking music on it :)
05:18 that transmission transition 🤩🤌🏼
haha thank you
@@chrisfix
You are a good car fixer
I’ve learned 99% of what I know about working in cars from you. Thanks Chris!
Awesome!
Me too!
ChrisFix. One of the best channels on UA-cam. This needs to be on the trending list isn’t of the other crap they put on it.
Thanks Eric
ChrisFix Thanks for the ❤️. Love the Mustang. I’ve got one too. Mines a 65 coupe.
This channel has come such a long way. The videos never get old
Thanks a lot!
Hi Chris, I have used your video now three times over three years to change clutches on different cars of mine. It is great to go back and revise things I’ve forgotten. I never would have attempted this type of task without your tuition. Your video is a complete course. Thank you.
Chris, you make something that seems so complicated look so easy! Even a beginner as myself is now confident I could do this in my driveway!
You totally can! All you need is the know-how and tools!
ChrisFix definitely have the know how now!
Micah winters In
Did you end up with a bunch of extra screws like me ? Of to the dealership I go 😂
@@chrisfixMy dad and Grandpa always made it out to be like doing these types of things as a big process and too complicated. However, the way you break everything down into small manageable steps and you do it safely with the right tools, makes it so much easier to do! Thank you so much!!
Chris fix why you havent got you tube ads man you deserve the money man.
Theo Seven we won’t complain
I fucken agree!. My heart is so full after watching his vids. You gotta love the guy.
You can use the Amazon links to either buy whatever product he's linking to, or any other product that you search for yourself for that matter, as long as it's through the link he provided. He'll get commission on the sale. I'm trying to do that, but I'll need a bit of time to get to the same number of subscribers haha XD
Whenever life gets rough, watch ChrisFix swap a transmission. Great work man, my jaw was hanging through the entire video. No way i'm crazy enough to do that kind of operation on my car though, but what are men if they don't dream right, Lol. God Bless
I like what U had to say dude it's nice to hear someone remark with sence
Nothing here was a surprise, I’ve actually done it decades ago, but I’m kinda nervous. Much more confident seeing you go through it like this, even if my car is a bit different. Thanks for all your fine work, and wish me luck!
Good luck! If you did it before you can definitely do it again
People who watch to fix the car : 5%
People who watch just for fun :95%
I am one of the 5%
I'm the 95%
Iam 5% too lol
Accuracy of this comment: 100%
95%
Who else warches his videos even when you dont need to fix your vehicle but because he is very entertaining
Hopefully you learn a lot too!
Mr. Nubhead I too warch videos depsite my car being okay.
5:17
That is the most beautiful transition I've ever seen.
yeah that surprised me
Yeah
ur damm right !
That transition was so smooth, i didnt even notice
And 7:03
Great idea of getting a transmission jack. I took out a duel range hydromatic transmission from my 1955 Cadillac with a floor jack with a small piece of plywood and the transmission sure enough rolled off and pined me and a helper under the car. Those old transmissions are like an anchor for the passenger ship the Queen Mary.
You outdid yourself, my man. The transitions were flawless and the angles immensely aided learning. Keep it up!
Thanks a lot Keenan!
I've always feared working on my car from underneath from fear of it falling on me, but you've eased my fear with the methods you described. I love you Chris.
We love Chris Fix ! WHERE IS THE NOTIFICATION SQUAD AT ?!
Right here fam
Right here bois
Here
Here
Wassup wassup @chrisfixit !!!
I appreciate Chris’s thoroughness with making these videos & how he explains the mechanics in a simplified matter great job 👍🏻
Thanks a lot!
Nobody:
Chris Fix’s blood type: Medium strength threadlocker
LOL
Thank you Chris fix for thinking this joke was funny 😂 also I'm a really big fan
LOL in the chat
5 hours, take it or leave it
KingTop Topoftheworld123 what
i want this guy to be my mechanic
Crucial YT said it took him 300 hours to do.
Ryan Adam he means it take him 300 hours to take it, do it, edit, and upload
He is expensive
Hes only a backyard mechanic not certified. There is tons of people like him. He just makes videos and still lives at his parents house
tribulation138 and most backyard mechanics are far smarter and more creative than the certified ones
It would have taken Chris like 1-2 hours if not more to replace the transmission whereas typical certified mechanic would have taken 3-4 hours
You explained in great detail how to replace a transmission in only 28:24.
My old high school auto teacher took a month to explain this by making us take notes and we didn’t even get hands on practice.
I’ve learned more about cars because your channel than I did my whole 3 years in an automotive class in high school lol.
I just got to say, thank you!
That’s awesome! I’m glad you’re learning a lot!
You're lucky you were in high school and didn't get scammed out of thousands at one of those for profit trade schools.
A mechanic would want thousands for this job thanks Chris
I know what I'm doing for the next half hour!
*Tavarish intro intensifies*
Glad for you to stop by
Tavarish nice Lambo
Tavarish replacing your transmission?
Tavarish I don’t even have a car cuz I’m a kid and still watching
Chrisfix family where you at?! Happy new year!
Brando Da Bikestar hell yea
Second
Never had exhaust nuts n bolts in that good shape , pipes too !
Ray Sno He installed a new exhaust system a little while ago
Congrats on being first
Lol my girl friend just asked me about a bad throw out bearing and asked if I could fix it. You are my favorite mechanic 😂 sorry for the bad english
Next video covers that specifically!
The fact your girlfriend knows what a throw out bearing is questionable.
Man, aporaciate your informative explanation of the general principles of the mechanism. Solute to you from a van owner.
Its so much easier watching Chris do this than doing it yourself! I would have given up at the starter!
LOL agree
The first rusted bolt usually stops me.
@@11Kslingshot I attempted this same operation on my 65 corvette when i was in college, and rather than those nice 3 ton jack stands Chris uses i just pulled it up on a curb to give me a little clearance..finally i dropped the transmission out- RIGHT ON MY CHEST!...was pinned underneath the car for a while, finally wiggled out, got my new clutch and pressure plate, put it all back in, got in the car started it, let out the clutch - nothing!..found out i had gotten the wrong throw out bearing from the parts store..i swore never again!
@@billnalder1017 Holly shit! Having a transmission on me would scare the shit out of me. My worse fear is to be crushed to death while working on a car. That has to be one of the worst ways to go.
@@twn5858 bruh, I'm 14 and my dad usually makes me go under the car to do the work because he cant fit under all the way. Once I heard the jack creak and I was all nope until I knew it was aok
1.4 million views in a week ?! crazy how far you’ve come man . great content !
Thanks a lot!
Job interview:
Employer: do you have any education or experience.
Me: yeah I watch Chris Fix videos
Employer: When can you start?
Sam Dawg 😂
Sam Dawg when can you star
In your dreams
Sam Dawg that’s me right there
😂🤣😂
I literally got a job today by saying this😂😂😂
Certainly the BEST transmission replacement video EVER. So detailed, so much room and light so we can actually see things. Thanks, Chris. Would you maybe do a similar video on a FWD car? I would like to see the difference when you don't have a drive shaft to the rear,
Do I need to fix a transmission... no; did I watch this entire video anyways... yup.
Thanks for the support
Nolan Neufeld same
Lol, same for most of us 👻👻 but it helps, so i know if my car mechanic is doing it right 😈😈
I am the warranty.
Do I even have a car? No
So I'm a lube tech and I'm taking classes online. I'm honestly so glad I found your videos. So much better having a visual step by step and reading step by step. Thank you chris, amazing video
Awesome! Glad the videos are helpful
First thing I'm doing in 2019 is watching this whole video. :D
802 Garage me 2
Lol same
Same
Same
Why hewo there, guess im not alone then
These are the best camera angles I have ever seen for car disassembly.
ChrisFix I have been waiting for a video from you. Also just to let you know one of my teachers uses your videos to help teach their class.
River Alley lucky that your teachers teach about cars :(
My teacher did the same he used one of his videos to teach us
ThePhantomFox - Gaming mine never showed videos, we had to read a book out loud to the class and then do the questions at end of chapter
That is awesome! I am glad they see the value in the videos in a school setting!
River Alley wait, so does that Mack chrisfix your teacher?!?!
it's amazing how rusty exhausts can get in such a short period of time
Thats nothing. I used to have a 2011 dodge journey. That exhaust was looking like that the day I got it out the dealer..
Thats looks like his Old exhaust
the new one was stainless steel no?
@@Wootsand might be a bunch of caked on dirt. I thought it was stainless too
@@benjaminschmied7998 he is better than you by fixing cars dont tell that is nothing
5:18 Love that door opening transition.
Thanks
Didn't appreciate it enough the first time!
The Flannel Fisherman ikr
Thank you Chris, you have just served me HOPE.
Don’t ask me why I just watched this whole video when my transmission is fine.
Hopefully you enjoyed it and learned something new.
I watch all of his videos and don’t have a car
@@chrisfix new vid soon?
I’m a mechanic and I still watched this whole video. It’s good to see how others accomplish the same job.
ChrisFix hey Chris I have a 2001 Ford F-350 that’s low on automatic transmission fluid I bought some Valvaline Mercon but I don’t know what brand of fluid is inside. Do you know if adding a different brand of fluid would hurt the transmission?
Thank you
chrisfix: how to replace transmission
me: dosent know how to change tires
I think I got the part about disconnecting the negative terminal.
How to increase your hrspwrs
@@davidchang8428 😂😂😂
Watch ChrisFix for 5 more years.
You will get to know how to make your own car so that you don't get ripped of by car companies and save a ton of money.
@Heroic I'm sure Chris has a video on that too haha
Chris you put so much effort into filming these guides. It's really cool and interesting. Even for someone like me that would never attempt this. The multiple camera angles and editing is brilliant. Well done Sir.
Thanks a lot!
Can I ask how long a video like this takes to film. The job is probably 3-4 hours. But I bet with all the camera adjustments it must take so much longer. Thank you though.
Man, this is very good to know there always a right tool for the right job. I hope all mechanic know this especially at my country.
As a mechanic myself you make these videos very professionally and so easy for people to understand what to do and how things work, thanks. Question for you, is your speed sensor inop as the Speedo didn't work on the test drive? Thanks again.
The needle went completely around at a drift event. I need to take the dash out and put it back on the other side of the pin. Third gear burnouts can do that haha.
@@chrisfix maybe time to swap to a digital speedo?
@@chrisfix couldn't you use a strong magnet to bring it back around??
That is actually a really good idea... Hmmmmmmmmmmm
@@chrisfix After my girlfriend's car battery died in the winter one time, the gas gauge flipped around and was stuck and I brought it back around with a strong magnet! I bet it would work for that too!!
Chris’s videos are better than ASMR. Like if you agree
ASMR for car guys😂
WWM no the asmr for car guys is some car turbo and acceleration compilations
TT04 yes but it’s sooo nice to watch him do everything exactly the way it’s supposed to be done😁
Perfect easy application to demonstrate this on.
Tons of room and simple process.
No 4wd, no concentric slave, not transverse, not automatic, no special tools, no problem.Didn't even have to remove the front clip or sub-frame of the car to pull the engine/trans out or down.Seems like most of the cars I work on you have to buy/make a specialty tool, program the new part, or remove half the car these days.
Hey i watch you videos Brian and thanks you have really helped me alot and i have started a test channel myself. You already have the repair channel covered but great work
It really was an awesome car to demo with. I'll be making a video on WRX transmission replacement this year and there are at least a few extra steps. Slave cylinder, intercooler, front axles, driveshaft carrier and rear guard, plus the pull type clutch! Still, this video sets a high benchmark for tutorials. Sure beats some 5 minute explanations by other big channels. Love your work, Brian!
briansmobile1 I think he uses his head a lot before buying any special tools. It’s not that this job doesn’t require or recommend the use of special tools or extra removal.
Thanks a lot man! Yea this was a great basic example to give the people an idea of what’s involved.
this dud is so thorough in explanation, has great production skills, and doesnt skip over showing steps when recording. keep up the good videos
Never put your shaft in dry 😎
Joshua Bowen Hahahahaha
I thought about the same thing.
😂
😂
but forreal...hope there was grease on that input shaft!
Its incredible how simple and doable you make this look! Pros to you sir. Thank you!
Every mechanic in the world: "You don't want to replace your transmission. It's a lost cause, and it is far too much work."
Chris Fix: "Follow these simple steps to remove your transmission. I'll hold a camera while I do it all by myself."
The magic of editing.
Manual transmissions are easy to maintain. Autos are completely different.
My ex is a mechanic specialized in transmission. Had him watch this video and he said if people actually had patience and took time to do homework on their car like Chris does he be out of work.😂 I been using your videos to help me out save $ . Then I just go boost my work to my ex when I have him check it out just for reassurance . Ladies you need help keep watching Chris!
@@NancyAOrta, It's good you and your ex still have a good relationship. I'm glad for you.
@@NancyAOrta In other words, he may be an ex-boyfriend, but not an ex-friend! Well, that's.....good!
What a great tutorial. You would be an outstanding automotive instructor.
Thanks!
finally :) quality over quantity
Thanks! You know it
Chris makes me feel like I could do this kinda stuff. Meanwhile I still haven't gathered the nerve to do an oil change.
Me too😭
Same 😂 he makes it seem so easy
Hey, start small. I never changed the oil myself before this summer and now I’ve done spark plugs, transmission fluid/filter, complete brake jobs, and others. I’ve already saved thousands of dollars because Christfix showed me how simple it was to do some car repairs. He’s good for seeing how to generally do something, and then refer to Haynes and UA-cam videos on your own car.
@@XxJaguar22 how do you know when you have a problem with your vehicle and know when or how to change it?
@@budweiserjackdaniels6664 That's a hard question. I knew that my dad didn't take care of my car except he did faithfully change the oil. It had 140,000 miles, so I knew that it was due for multiple routine things. Check engine lights are also helpful because the car knows something is wrong and it is telling you. I bought a code reader for $70 and it was the best investment I've made. You can fix the vast majority of check engine lights for less than $100 and it would've cost that much for a mechanic to tell you what the problem is and not fix it.
Next on ChrisFix :
How to assemble an entire car from parts at the junkyard.
Stay tuned!
road kills back
no
then the world will never no
Does it cost less than $100 - 300
It is only $5
@@ucy_jvp27n6wsatjmhwasdmg5 Well junkyards do have cheap cars and parts but you have to get lucky. Your price range? Not that lucky.
Honestly this dude is amazing...like i have no words for his skill in both all things cars and how he presents it in his videos...he's the best car repair guy on youtube period no debate. Man this was dope to watch.
You sir have a gift, I am so happy that everything is working out for you, the amount of work that goes into these videos is simply amazing!
Thanks a lot!
This is the most helpful transmission swap video I've ever seen. Great work!
Glad it helped!
This video could not have came at a better time , my clutch actually just gave out about a week ago and I've been waiting on this video because I don't trust any other video on UA-cam! Love your videos man and I respect the amount of time you put in to them for others! 😀
Thanks Jake and I am glad the video will be helpful! Clutch video is up next so stay tuned!
5 Months of sitting in my garage….. She’s now running! Thank you, CF!
Chris your an honor I honor you so much that you were my first video in 2019 to watch🤗
Nice work! Detailed, quick, and clear!
I also like to lubricate the shaft so it doesn't go in dry
lol
Well played, sir. 😉
thats what she said
Very funny my friend!
I see your a man of culture as well
if someone where do make a video about the most important videos on youtube this would certainly be one them. very straight forward but explained very well and didn’t just remove the trans but showed us how to re-attach everything properly with very nice camera angles.