I love how you edit out all the swearing, kicking things, yelling at the sky and negotiating with yourself to not give up and finish the job. Makes car repair seem so pleasant. :)
As a 52 yr old sheet metal tradesman I’d recommend someone who has never welded sheet metal to a day or 2 practicing with slow/fast wire speeds and low/high power to get a true feel for welding car body metal. Chris is making this sound a lot easier than it actually is. Practice will mean you don’t need to repeat the job. My new apprentices spend a month (a least) practicing before they touch a customers job.
I've always been afraid of welding, but I was thinking something similar. I've seen enough and read enough to know about welding that its not THAT easy, and especially once you get close to structural joints around suspension. But I think idiots do need to take responsibilty if thinking using super high heat and melting metal is just something you 'pick up and start doing'. But anyting being welded I think thats worth mentioning, do some prep work and maybe take a course or ask a mechanic to watch some welding. My mechanic who just welded my exhaust says he doesn't do body welds, find somebody who does. I like DIY, but welding is definitely not something to make sound TOO easy just because you can find cheap equipment. Its sort of like electrical, yeah you can do it but there's a reason why it takes about six years to get a red seal. But I did like his energy.
I had a blast welding with brand new mig with automatic wire speed and automatic mask. I had only 2 hours of practice and getting my self familiar with that mig. After that welding was so simple because that mig made it easy. I get what you mean tho 😊
I’ve been welding on and off for the past 14 years and I remember learning from my grandpa when I like 7. I found it pretty easy and I think anyone can learn how to do it. Ofc I don’t weld professionally so my quality of work that I can live with may not be suitable for others.
Chris fix is such a good UA-camr. He is someone who actually cares about his viewers, and is not in it all for the money. He goes back on old videos and actually reads all of the comments thanks for being a good youtuber!
That's right. When I did my welding course, all we used were nice big pro mig welding machines running on 3 phase electricity and using thick steel plates. Nice big, clean welds with tons of easy, beautiful looking, full penetrating beads . When I first tried doing my first car job I was literally back to square one! None of the techniques I'd learned really worked effectively. Holes, spatter, fires even 😬. I call automotive welding dirty welding cos I always make a right dirty mess of it. 😊
meanwhile barberss, hairdressers and waxolgists are like, "put the shears down, don't try to wax at home everrrr" maybe you'll still suck at it, or maybe you'll suprise yourself with practice. Instilling confidence like Chris so refreshing
I've never stuck my head under a car in my life and ChrisFix makes me think I can rebuild a transmission and fix holes in cars. Thank you for the extremely knowledgeable content, I've been binge watching for the past week or so and have learned so much!
@@stackfire9601 trying to tell if this is an insult or a compliment. “You already know everything you can’t learn anything new”. Or “your brain is so pathetic you’ve reached max capacity”
I had an Alfa Romeo 156 2.0 TS bought it with 255‘000km and sold it with 312‘000km on the clock, it was still running fine, it also never let me down! Alfas are great cars 😄
Any time you look up any repair procedure from a manufacturer's repair manual, removing the negative terminal is often the first step. It's a universal safety tip.
Awesome video! I've been a welder for over 20 years, specializing in TIG, MIG, MAG, and stick welding. When working with thin metal, I position the welding gun at an angle away from the puddle. This way, you don't add too much heat to the plate, resulting in a flatter weld and less grinding afterward. For metal over .38 inch , I point the gun at an angle into the puddle. Just some tips!
EXCELLENT WORK! This is one of THR BEST UA-cam tutorials I have ever seen. I'm an older guy, I have done some of this work before and I Iearned SO MUCH. Your style is GREAT. No BS and random chatter, clear, articulate and friendly. Well edited! It's also apparent that you are not reading the material , which leads to a stiff-sounding presentation. On top of all of that, you have a very positive way of making challenging work seem very approachable to beginners. This is a truly rare skill. And you don't gloss over anything (which can be so frustrating) Lastly, the amount of REALLY useful tips you throw out like popcorn is really amazing. The vent techniques, disconnecting the battery, proper grounding for the weld, the flashlight trick....so useful. Honestly, I have never contributed to a UA-cam creator before, but I'm going to send you a few bucks. And subscribe. Thanks so much for a truly excellent presentation. Five stars.
I started of the same way, but a few months ago my car wouldn´t start so i followed ChrisFix video on how to find the problem and fix it :) Now the car runs perfectly :) And i saved a lot of money doing it myself, my car is going in for its yearley check-up tomorrow and i hope that it comes out with a clean bill :) Otherwise i can always find the answer on chrisfix channel :)
@Flakse Gaming That's not the point. If you do it as seen on the video you'll have welds that last years if not more. Also this is beginner friendly so not like he's trying to teach the professionals how to get better.
I’ve been doing my own rust repair before that car even existed but thanks to you, I need to make a shopping list for my ongoing projects like a nibbler for tight spots and flexible duct for my shop fan. I already have some items on hand like IPO to wipe down weld material, LED light for locating pinholes at night, plastic wrap and argon to displace atmosphere from paint cans. Great explanation of stitch welding and the use of reference marks, too!
When you had the gasless welder out my heart sank... but then you told us that you can't use it for sheet metal and I nearly cried with joy. Thank you, perfect video.
God bless you, brother! After 52 yrs in the tooth fixing business, I wish my dental instructors could have shown us 1/10 the enthusiasm for the work as you demonstrated with this fix. The vocal was wonderful and you provided lots of knowledge in an easy to absorb manner. You are a great teacher and I appreciate it.
I really appreciated the mask and vacuum recommendation. There's no point in harming our health and shortening our lives over fixing a car. Taking a few small precautions can make doing what you love easier. Definitely subscribed.
Fabricator/diy bodyman here. Excellent display of the basics and how to solve a simple issue, the only thing id have to add is that when you go to stitch the panel, to make it look as flush as possible and keep distortion to a minimum: I like to skip around each corner of the panel with one/two stitches and everytime ive passed 4 corners ill stop, wait 7 minutes to allow the metal to cool for a bit. Really allows you the option to take the beads down with a sanding flap to appear flush with the shape of the paneling around it👍
Im 57 and have always wanted to learn how to weld. This video is great. It was cool to be able to see you weld. Im sure ill have years to learn but this is very informative.
Just gotta get a welder, watch some videos, and start practicing and learning. As long as you wear a mask to protect your eyes, don’t weld anything except bare steel (no galvanized) and use hood gloves you can learn the basics without getting hurt.
This guy really knows his stuff. I was really impressed by his knowledge of metal surface prep. I am a paint chemist. 90% of our product complaints come from improper surface prep. He did everything right. The rust removal, the sanding, the solvent wipe, and all done with proper personal protective equipment.
So one needs to be a paint chemist to know proper surface prep? Comments like yours make me laugh. I’m just some dumb sob and I’ve managed to read the instructions on a can.
@@Retrodogo uu8888888888888888888888888887888888888888888888888888888888888888788888888888888888888887888887888888888888888888888888888888888887888888888888888888888888888888888888888888888887888888888888888888888888788888888888887788888888888888888888888788888888888888888888888788888888888888888888888888888888878888888888888888888888888888888888887888788888888888887888888888888888888878888888888888888888888888888888888888888888888887888888888888888888888688888888888888888888888888888888778888878888888888888888878888888888888888888888888888888888888888888888888888888888888888888888888888888888888788888888887888888 you 88888888888888888888888888878888888888888888888888888888888888888888888888888888888888888888888888888888887888888888888888887888888888888887888888888888888888888888888888888887888888888888888888888887888888888888888888888888878888888888888888888888888888888888887888888888888888888888888888888888888888888688888888888888888878887888888888888888888888888888888888888888888788888888888888888888888888888888888888688888888888888888888888888888886888888887888878888888888888887788888888888888888888888888888888888888888888888788888888888888888888868888878888888888888888888888888888888888888888788888878888888888888888888888888868888888888888888888888888888888888888888888878888888888888888888888888888888887888888888888887888888788888888888888888888888888888888888887888887888888888788888 you 8888888888888886887888888788888888888888888878888888888888888888878888888888688888888888888888888888888888888888888888887888888886888888888888888888878888 it 888888888 you 88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888878788888888888888888788888888888888888888888888888888888888888888888788888888888888888888888888888888888988888788887878886888888887888888887888888888 iui 8878888888887888888888888878888888888888888878888888888788888888i888888788888888788887888886878i888888888888878888888678888888887888884688888888887888888887887888888878888888888888878888788888878888888888i8888888888888888868888888887888888888788877887888888888888 you 887⁸⁸88⁸⁸98⁸⁸9888⁸⁸88⁸⁸⁸88⁸⁸8⁸⁸⁸⁸8⁸⁸⁸⁸⁸⁸⁸⁸⁸⁸⁸⁸88 U 8888 U⁸⁸88888887888 UK 887 U 87888888888888888⁸⁸⁸88878 UK 8877878888888888788888 UK UK 76888 up UK 8988 iui 98878 U 8878888888 you 888888 you 888888 you 868UK 878 UK 888 UK 988887878888887898888787888888878888 UK 8 U 88888 UK 87878788686878 youyou 7899 U 88788888 U 7888788 U 7888888888788 UK 8888787888898 7 788888868 UK 78 UK 88868 UK t8 UK 7798888889888868887887 you7 UK 88 youup 78878778868888 UK 788 UK UK 878979786 uh 8878 UK 809888 you 888878788887887788786787868 you 88788888 UK 8 you 87888 you U 888 you 8887888778888 UK 8 UK 8878988788 UK 878 U 8 you 978878 you 7788 UK 7878887888878787879888 iou 88787887878 iui 88 UK 87878988988788808 iui 87786 you 7 7 88 UK 77878887878 UKiui 8886887868 7 iui 8979788877 youUK 7878887888 up 788 UK UK 88 U 8878 U 8878878888 UK 878 you 88786 it 8888887 uh 8 UK 7878 UK 88 UKU 8 you 7878888888⁸8887887788 UK 888 you you 8888878 UK 8887887887887978 UKUKyou 860808887 U 87888 UK 78 UK 87UK 688886877798888 UK 97UK 78788888878788 UK 8 UK 78 you 787887887987888888798878787 iui 99uppity 8888 UK 7888 iui 8889788 UK 87887877788878 iui 88UK 89877 UK 868 7 8 U 878 iui 8 U 8 iui 8888788887987
I got an 08 Mazda 3 and this video helping me fix my holes underneath cause here in Ontario Canada you need a safety to get a car on the road and my car will for-sure not be able to pass but thank god you made a video to this I will be able to drive!
My criticisms: - You can use flux core for this application with the technique you've shown. It is much more tolerant to wind and contaminants and much cheaper to run. - Your tack weld had a crater in the middle. Stay on the weld a little longer. - Your first stitch weld had a void in the top right. - You really should wear leather gloves for welding. Vinyl can melt to your hand and gives no protection against heat or UV cooking your skin. Still, good stuff, enjoyed the video and you showed good technique.
ChrisFix Hi, can u please show ua how to replace Back/rear Left passenger seat belt for Toyota Camry 2001. Ur video are very clear, informatif n helpfull. Thank You in Advance.
Used to have a mk3 Toyota Supra that was fun to fix and work on and zoom around in, but was too annoying to be a regular car, this reminds me those times haha
FYI your mig welder’s wire spool is upside down, the wire should have a natural, strait line, for all you English speaking readers, the wire shouldn’t be bent, and is so, a little bend. For all the people who still don’t understand, the wire needs to come off the spool from the bottom on this specific welder, the manual is a true legend for dangerous equipment, look it throughout. Btw I think you had your weld settings almost perfect, if you look at the tack welds, you’ll notice a little dot, we call that a fish eye, it indicates (for me) perfect or near perfect settings, so good job man! Helpful how-to’s always are needed!
As a girl, my dad and grandpa never really included me in fixing things or working on cars as much as they included my brother. I'm now 18 and have decided to learn it on my own. Thank you for teaching me Chris :)
That's not fair. If you were my daughter you would've been welcomed and encouraged to join under the hood and invited to get greasy with the brothers. Ive always said every girl at least should know how an automobile mechanically basically works (how the parts interact with each other and trouble shot problems) besides put gas in it and turn the key. So they don't get ripped off if they do decide to take their car to a shop. Good for you even if you have to research and learn on your own. Hey, just a suggestion look into learning some welding also it's useful knowledge and skill too, to go along with the automotive learning. Amazon has some welders at affordable prices. Yes welder brand seem to have decent welders at excellent prices that's good for beginner or homeowner use, with good reviews by UA-cam reviewers. Plenty of video tutorials out there. Just putting the idea out there if interested. 👍Good luck to you learning all you can.👍
@@whysoserious7014 Thank you for the support, it makes me very happy! I’ve welded a few times in school and found it very exciting and fun to learn a bunch of different techniques. My grandpa owns a welder so I might ask him if I can borrow it to practice:) You seem like an awesome guy, and thanks for the idea!
Lol a lot of women mechanics on yt when I had to rebuild my jeep tj front end ball joints and most of the steering joints ad well I came across them I was like well if they can do it I cld attempt it. I did took advice and tricks from 6 pple 5 yrs later everything is still good
sorry for that, my dad always included me and my sister in car stuff. litterally we built a 454 at the age of 8 to soon find out the block was cracked lol.
Was looking for a car literally yesterday owner said in description that there is rust under car. Made me wonder how do I fix rusty floor boards for car to pass safe inspection.Chris Fix you are amazing! so inspiring save us lots of money on repairs and gives us entertainment. I’ve been subscribed for 4 years. From my age of 14 to 18 I have watched every one of your videos. Great stuff! Thank you!
I’m 16 and just got my license a couple of months ago and I swear, nobody has better car knowledge and car tutorials than ChrisFix. Keep up the amazing videos!
I would add to what others said, Don't feel down when it doesn't work out the first time. If something doesn't work out, chances are there were others who have done what you're trying to do so ask around, especially on forums if one is available or a fan club of your specific car. If you give up early you will NOT improve. Also, with the skills you pick up from working on your vehicle you get a chance to find a part time job at a mechanic shop if you wanted to. Good luck!
In 2003 I was given an '87 LeBaron that needed a floor. The mechanic who taught me how to mig weld missed a lot of these tricks. If ever I have to do this again, I feel much better prepared. Thanks!
I feel ya bro both of my fenders are rusted through on my 1993 Wrangler I originally started with the other video about using about using bondo but quickly realized I needed a patch.
Just 1 video packed with more information than others can put in 5 videos!! Always amazing job!! Well deserved the almost 10 million subscribers Thank You man
You deserve every nickel you make from You Tube since your videos are dramatically practical supplemented by a wonderful personality the result of great parentage and loving grade school teachers. Chris you are a winner. Thank you for all you do and all you provide.
Car: has slight problem Chris: makes whole new car Also, isn't it funny that the shape of the hole and the shape of the cut sheet metal looks like an engine?
I'd like to give u a shout out, and say thanks for what u do to help ppl out with DIY. Cause some ppl can't afford to pay a shop to do repairs or like me I'm poor and rather do my work myself on my car build. Makes u have some pride in what u do. So thanks, my man. I truly appreciate you.
Truly a great tip! Where did you get the blower or who makes it? I could use that on particular everything I do.. haha keep up the great videos! Also the nibbler, brand?
@@viewthoughmyeyes I've seen basement Radon exhaust fans that look a lot like that, and are 110/120v powered. If you just search for a 6" duct fan, you'll probably find what you need.
I’m Latin and don’t speak lot of English but I really love the way you explain in a easy way I can understand thanks so much and you got a new subscriber
Chris's videos pop up every now and again on my feed. I'm always taken back by his level of enthusiasm. He's been doing this for years and it always seems like his first day! Nice to see someone enjoying their work so much.
I have to say, as a nurse I appreciate the PPE recommendation, far too often do people go in wearing nothing and end up with debris in the eye, or inhaling crap. Definitely subscribing.
Welding is one of those things that has always seemed so intimidating, but you take the mystery out of it. Now I want to try. Thanks so much for all your great videos.
As a welder I can tell you it’s harder then it looks but also at the same time it’s not if that makes sense. In this application your welds don’t need to be great but in other fabrication you do need good welds
This is a great vid, my 95 M3 has a gnarly rust spot located right under where the battery goes in the trunk. I relocated the battery to buy some time but I hope when I get to it my repair comes out as clean as this one. You broke down the process really well and made it seem super doable and manageable to do yourself, thank you!
If you find yourself with that “keyhole” shape burning through, definitely turn up that wire feed speed(wfs), or turn down the voltage a tad. Essentially, turning up the wfs uses more power, and “cools” the weld. And of course, turning down voltage also achieves this same effect.
Ha! I replaced the towel rod on my bathroom a couple weeks ago, and I was able to screw the brackets into the studs instead of the rinky-dink drywall anchors the rod came with. I was bragging to my wife how strong it was going to be and thumped on it to prove my point and it fell off the wall! Turns out I didn’t tighten the set screws enough, but it was crazy embarrassing!
Your videos are just simply the best. I remember when this video came out 3 years ago I had just finished online school and saw you posted and was so excited to watch
Little tip to make the 2 pieces line up perfectly easily and quickly. once you have the new metal roughly sized, clamp it or even tack it in place then use a cut-off wheel held on a 45* angled towards middle of the new metal and cut through both new and old. This is done to make it so you don't have a gap once it's done being cut. Works fast and it's easier to weld as it has characteristics of a lap joint.
Nice tip that is, it's a skill in it's own I guess. For a noob like me that seems hard because of the shapes and tight corners. But if you master it I imagine it get some nice fits!! If you use this technic you clamp or tack it on top of the old isn't it. First on the bottom side to draw the rough shape and then put it on top, clamp or tack it and then use your technic to cut it nice in shape. Sorry for my bad English, I hope you understand what im saying/asking! Cheers
@@sfuchs if the new piece lays on top of the original, you'll be cutting the original more in-board, and the new will lay down onto it. Try drawing this on paper ...and you might have cutting a wood board at a 45 angle in mind where you'd end up with a gap equal to the saw blade width, but if you picture two boards laying on top of each other, cutting through both, you find the bottom board captures the top board.
As a bodywork, welder & auto spraypainter for over 40 yrs, I must commens you on your dedicación & super skill. The only thing I do different is after after identifing the rotton spot I would use cardboard as a templete to make the patch for the area to be replaced in that way you only have to make one cut.
@@chrisfix that's amazing, you're full of knowledge. But since the turbo will add more air to the engine, how will you add more gas? It's fuel injected so that won't be an easy task
Lol I’m waiting for the day he comes on here “Hey guys Chris Fix here, and today I’m going to show you how to build a entire kit car from the ground up.”
I love when competent people do things for themselves and also can make a great video for others to learn from them as well! Great job man. A lot of work just comes down to having the confidence to try it. Letting people see each process is wonderful! If you can do each one you can do them all! Great job!
It's amazing how I learned to weld in a school and they never mentioned stitching to discipate heat, Love your station always informative and well done 👍🏻👍🏻hope you are staying safe!
When stitch welding, there’s no shame in adding another tack in between each original tack, this really helps with heat balance to prevent warping. On top of that, it makes it so you don’t have to stop in between each bead being laid; ergo no time for a bead to get too hot resulting in burn-through. For a beginner this is good work. P.S. make sure to focus on fusing the two metals instead of being afraid of burning through, although it’s very important not to burn through, solid fusion is the main point of a weld. Nice work!
@ChrisFix today my dad had a flat tyre, so he called me down. and i have been a fan of yours for a very long time and watched a that one video where you taught us how to fix a flat tyre. the van had an extra tyre and i remembered your video. saved me and my dad so much time and by the time the mechanic team of my dad's company came, we were already finished, and i got praised!! thanks chrisfix! literally saved my dad and it just drives my dream even more to become a mechanic when i grow up
You are the best! I wasn’t sure about buying an old Nissan 300zx (from 1984) and now I’m confident enough to finally buy it and repair it! Thank you and keep going !!!!!!!
I love this man. I mean if I can’t find his diy video for something I’m trying to fix or do with my car and stuff, I get mad. Nobody explains how he does. ❤❤❤❤❤❤❤
I love how you edit out all the swearing, kicking things, yelling at the sky and negotiating with yourself to not give up and finish the job. Makes car repair seem so pleasant. :)
I agree
Welding is cool
Welding gets it on hard tight
So It won't fall off and fail
It's stronger than bolts
Lol
He dosent cuss and has passion
As a 52 yr old sheet metal tradesman I’d recommend someone who has never welded sheet metal to a day or 2 practicing with slow/fast wire speeds and low/high power to get a true feel for welding car body metal. Chris is making this sound a lot easier than it actually is. Practice will mean you don’t need to repeat the job. My new apprentices spend a month (a least) practicing before they touch a customers job.
I've always been afraid of welding, but I was thinking something similar. I've seen enough and read enough to know about welding that its not THAT easy, and especially once you get close to structural joints around suspension. But I think idiots do need to take responsibilty if thinking using super high heat and melting metal is just something you 'pick up and start doing'.
But anyting being welded I think thats worth mentioning, do some prep work and maybe take a course or ask a mechanic to watch some welding. My mechanic who just welded my exhaust says he doesn't do body welds, find somebody who does. I like DIY, but welding is definitely not something to make sound TOO easy just because you can find cheap equipment. Its sort of like electrical, yeah you can do it but there's a reason why it takes about six years to get a red seal. But I did like his energy.
I had a blast welding with brand new mig with automatic wire speed and automatic mask. I had only 2 hours of practice and getting my self familiar with that mig. After that welding was so simple because that mig made it easy. I get what you mean tho 😊
I’ve been welding on and off for the past 14 years and I remember learning from my grandpa when I like 7. I found it pretty easy and I think anyone can learn how to do it. Ofc I don’t weld professionally so my quality of work that I can live with may not be suitable for others.
Can you like, shut up?
Imagine being old critizising a diy video. You old heads need to stop treating others like they're slow.
Chris fix is such a good UA-camr. He is someone who actually cares about his viewers, and is not in it all for the money. He goes back on old videos and actually reads all of the comments thanks for being a good youtuber!
not in it for the money? every1 that makes a channel does it with hopes of making at least a little extra money.
artie ny83 he’s talking about youtubers like JayStation
You can be in it for the money AND care about your viewers. People need to pay their bills somehow lol
Fixing the Honda del Sol 3am challenge (GONE WRONG)
car guy newb (GONE WRONG) (GONE SEXUAL) (COPS CALLED)
I’m a retired mechanic/welder. I commend your good, basic information. Maintenance welding is not really taught in “welding school.” Good job.
That's right. When I did my welding course, all we used were nice big pro mig welding machines running on 3 phase electricity and using thick steel plates. Nice big, clean welds with tons of easy, beautiful looking, full penetrating beads .
When I first tried doing my first car job I was literally back to square one! None of the techniques I'd learned really worked effectively. Holes, spatter, fires even 😬.
I call automotive welding dirty welding cos I always make a right dirty mess of it. 😊
I'd just like to say that the way you talk to us with such high confidence, is a huge morale builder.
meanwhile barberss, hairdressers and waxolgists are like, "put the shears down, don't try to wax at home everrrr"
maybe you'll still suck at it, or maybe you'll suprise yourself with practice. Instilling confidence like Chris so refreshing
The way he talks gives me so much confidence. He could do a tutorial on hip surgery and it would get me hyped up enough to try it on my grandmother.
😂🤣
Hahaha
😂😂😂
his voice pitch sounds younger year by year even when he started in 2012
Ur right, we'd be busting out the angle grinder on grandma
I've never stuck my head under a car in my life and ChrisFix makes me think I can rebuild a transmission and fix holes in cars. Thank you for the extremely knowledgeable content, I've been binge watching for the past week or so and have learned so much!
Please stop watching! Women cannot get any more knowledgeable!!
😆 LoL
@@stackfire9601 nah ur cringe
@@Unloaded74 backed
You can... its really that difficult.
@@stackfire9601 trying to tell if this is an insult or a compliment. “You already know everything you can’t learn anything new”. Or “your brain is so pathetic you’ve reached max capacity”
This is the most professional rust repair I jave ever seen, as compared to other channels.
Chris, you're flexing on us with those dust masks. Gosh.
can you make a video about oil additives?
today auto part stores are full of oil additves.
@@ziadbakkich3132 Hope it's not really an Alfa.
@@wholeNwon Everyone needs to own an Alfa at one point in their life. Best to get it over with early.
I had an Alfa Romeo 156 2.0 TS bought it with 255‘000km and sold it with 312‘000km on the clock, it was still running fine, it also never let me down! Alfas are great cars 😄
Ziad Bakkich dont buy alfa!!! Better to buy some Honda
Barbar 23 no a chevy or a ford
Chrisfix's top tools:
1. Soapy wooder
2. Safety glasses
3. Disconnection of negative terminal on battery
Any time you look up any repair procedure from a manufacturer's repair manual, removing the negative terminal is often the first step. It's a universal safety tip.
SkorpyoTFC not only that its so nothing bad happens you never know a fire could start even worse you get electrocuted
4. Torque Wrench
5. Medium Strength Thread Locker!!!!
@@chrisfix "You need that Medium Strength Thread Locker unless it's an unfinished job." -ChrisFix 2020
@@chrisfix can u do a video on how to apply boost to carbs
Awesome video! I've been a welder for over 20 years, specializing in TIG, MIG, MAG, and stick welding. When working with thin metal, I position the welding gun at an angle away from the puddle. This way, you don't add too much heat to the plate, resulting in a flatter weld and less grinding afterward. For metal over .38 inch , I point the gun at an angle into the puddle. Just some tips!
You are the man, ain't cha!
Never seen someone that happy when they see rust in the car... 😂🤔.Also can't wait for the Delsol tuning😅❤️
It is the quarantine? He is happy to have something to do?? Just a guess? Oh, and he made a video about it. :P
Cuz he makes money off the rust on his car
Because content to record lol. I’m gonna go and watch the video on wheels n stuff
Well one thing is for sure he made a great vid out of it😄
As a wise Canadian once said: Your welds should sound like bacon. If they smell like bacon, you're on fire.
hahahaha
AvE?
Ah yes the ol' bumblefuck
XD
Hahahaha!
That one was good!
Anybody who is judging those welds negatively hasn't tried welding thin sheet metal before.. Nice work!
Thanks a lot! It was my first time welding metal this thin and it was solid by the end of it so I would call it a victory!
People who judge welds done on car bottoms don't usually know jack shit about welding anyways...
@@chrisfix of course it is. Best car GUY I konw. Big well done
Yes,its very hard especially when you're trying to keep a human in there
Anybody who is judging harshly are those who leave a splatter trails.
EXCELLENT WORK! This is one of THR BEST UA-cam tutorials I have ever seen. I'm an older guy, I have done some of this work before and I Iearned SO MUCH.
Your style is GREAT. No BS and random chatter, clear, articulate and friendly. Well edited! It's also apparent that you are not reading the material , which leads to a stiff-sounding presentation. On top of all of that, you have a very positive way of making challenging work seem very approachable to beginners. This is a truly rare skill. And you don't gloss over anything (which can be so frustrating)
Lastly, the amount of REALLY useful tips you throw out like popcorn is really amazing. The vent techniques, disconnecting the battery, proper grounding for the weld, the flashlight trick....so useful. Honestly, I have never contributed to a UA-cam creator before, but I'm going to send you a few bucks. And subscribe. Thanks so much for a truly excellent presentation. Five stars.
I don’t know why but I watch Chris fix even when I don’t have anything to fix.
Now you know what to do if you have to fix something :p
Same here! I would probably never do it myself, but man I find it entertaining!
I started of the same way, but a few months ago my car wouldn´t start so i followed ChrisFix video on how to find the problem and fix it :)
Now the car runs perfectly :)
And i saved a lot of money doing it myself, my car is going in for its yearley check-up tomorrow and i hope that it comes out with a clean bill :)
Otherwise i can always find the answer on chrisfix channel :)
Me to
Me for years: "I got to learn how to weld"
ChrisFix: "I got you bro"
I got my welding degree from ChrisFix on UA-cam!
@Flakse Gaming That's not the point. If you do it as seen on the video you'll have welds that last years if not more. Also this is beginner friendly so not like he's trying to teach the professionals how to get better.
Chris: I will post a video on how to install a turbo.
Me: literally not sleeping until that video
i feel you bro
As an owner planning a turbo build for a del sol I can't wait ethier lol.
Your going to be up for a long time
@@VdubSmallGarage SAME I'm actually going to buy all my components today, I wish his video would be out before I get them
@@monstrositygamers I've got a little while yet I just re did the flooring and put new carpet in
I’ve been doing my own rust repair before that car even existed but thanks to you, I need to make a shopping list for my ongoing projects like a nibbler for tight spots and flexible duct for my shop fan. I already have some items on hand like IPO to wipe down weld material, LED light for locating pinholes at night, plastic wrap and argon to displace atmosphere from paint cans. Great explanation of stitch welding and the use of reference marks, too!
“Better to have too much penetration, than not enough penetration”
-Chrisfix 2020
Wise words my friend
Too much penetration can blow through
Zarbzyy do you make puns about retarded timing too?
so needs double the penetration.
@@ianluigilastra1850 DP lol
LOL
I’m a certified welder and you hit everything spot on really impressed
Apart from the welder's wire wheel is on the wrong way.
Way to show love and not hate!
Probably should wear welding gloves, and not rubber ones. If those melt they'll melt on to his hands.
@@logan2906 Should watch the video closely when he welds because hes wearing the proper gloves over his blue gloves... 23.00
@@creal5412 oh yeah thanks, didn't notice that.
33:02 "So that's a job WELD done" 😂
Chris hittin us with them dad jokes
Nathan Dem clever one Chris 🤣
Oh, he's red hot with them now.
When you had the gasless welder out my heart sank... but then you told us that you can't use it for sheet metal and I nearly cried with joy. Thank you, perfect video.
God bless you, brother! After 52 yrs in the tooth fixing business, I wish my dental instructors could have shown us 1/10 the enthusiasm for the work as you demonstrated with this fix. The vocal was wonderful and you provided lots of knowledge in an easy to absorb manner. You are a great teacher and I appreciate it.
He's a great teacher and his subscription count proves it 👍
If you’ve been 52 years fixing teeth why do you still need instructors 🧐
@@epicarcher999 *could*
I mean, if i had to crawl in people's mouths for a living id lose all enthusiasm too
Africa rust on the left
I really appreciated the mask and vacuum recommendation. There's no point in harming our health and shortening our lives over fixing a car. Taking a few small precautions can make doing what you love easier. Definitely subscribed.
Welcome aboard! And safety first, always!
I'm a old subscriber
I subscribed when I was 4 and I'm now 7
@@Unloaded74 bruh get outa here 7 year old
@@Unloaded74 lol im 14 good on you bro
“Honey the weirdo across the street is talking to his cars again.”
BTW no hate on Chris love all your vids.
Evo Evo LMAOO
Evo Evo good joke but kinda old on this channel
Yoooo
XD
It’s gotta be the cabin fever from the lockdown!!!!!
Fabricator/diy bodyman here. Excellent display of the basics and how to solve a simple issue, the only thing id have to add is that when you go to stitch the panel, to make it look as flush as possible and keep distortion to a minimum: I like to skip around each corner of the panel with one/two stitches and everytime ive passed 4 corners ill stop, wait 7 minutes to allow the metal to cool for a bit. Really allows you the option to take the beads down with a sanding flap to appear flush with the shape of the paneling around it👍
Cool
Chris this is my favorite project that you are doing, idk why but I can’t express how excited I am to see you do things to this car
Awesome Alex!
and the truth and the other one was a good one and the one that is not
I don't even have rust on my car but after watching this video I think I'm just going to cut a chunk out of my floor boards and weld it back in place.
Let me bring you my car 😂
I've 4 cars on my driveway. Everytime we drive them off it a little less car comes back 😆
Hhabahahah
Did you weld it?
😂
Chris hit us with an uno reverse card.....
He uploaded the vid like a day early lol
Once in a life time experience
The old switcheroo :p
ChrisFix haha well I guess the timer on your insta is for the cold start up video?? 😜
Chris you should get an old car and make it a Drag or Track Car
@Horizon585 Not with this thin of sheet metal. MIG or TIG for this job.
Im 57 and have always wanted to learn how to weld. This video is great. It was cool to be able to see you weld. Im sure ill have years to learn but this is very informative.
Just gotta get a welder, watch some videos, and start practicing and learning. As long as you wear a mask to protect your eyes, don’t weld anything except bare steel (no galvanized) and use hood gloves you can learn the basics without getting hurt.
This guy really knows his stuff. I was really impressed by his knowledge of metal surface prep. I am a paint chemist. 90% of our product complaints come from improper surface prep. He did everything right. The rust removal, the sanding, the solvent wipe, and all done with proper personal protective equipment.
So one needs to be a paint chemist to know proper surface prep?
Comments like yours make me laugh. I’m just some dumb sob and I’ve managed to read the instructions on a can.
@@jasincolegrove6651 yep, that is totally what im saying. Unless you hold a chemistry degree you're not allowed to hold a paint can.
@@narutosmack this guy also told us how to fix rusted sills with expand foam, don't forget that.
Everyone except Jasin Colegrove
is allowed to do these repairs.
90% of me complaining about a product comes from bad, vague, font size 2 and italics, only for California instructions
This is like the third time I've rewatched this video. I don't even need to repair a rust hole just love how clear and well made Chris' videos are!
I'm glad you love the videos! Thanks a lot!
I love watching the videos, very good delivery, done efficiently, minimal costs on a lot, what’s not to like
@@yournamehere3679 hell yeah
I like that chris tells people to wear safety stuff and tells us what is safe
Wilina Torreliza haha yea
Willina Torreliza Youa re right Madam...that's what the Pros do!
@@Retrodogo uu8888888888888888888888888887888888888888888888888888888888888888788888888888888888888887888887888888888888888888888888888888888887888888888888888888888888888888888888888888888887888888888888888888888888788888888888887788888888888888888888888788888888888888888888888788888888888888888888888888888888878888888888888888888888888888888888887888788888888888887888888888888888888878888888888888888888888888888888888888888888888887888888888888888888888688888888888888888888888888888888778888878888888888888888878888888888888888888888888888888888888888888888888888888888888888888888888888888888888788888888887888888 you 88888888888888888888888888878888888888888888888888888888888888888888888888888888888888888888888888888888887888888888888888887888888888888887888888888888888888888888888888888887888888888888888888888887888888888888888888888888878888888888888888888888888888888888887888888888888888888888888888888888888888888688888888888888888878887888888888888888888888888888888888888888888788888888888888888888888888888888888888688888888888888888888888888888886888888887888878888888888888887788888888888888888888888888888888888888888888888788888888888888888888868888878888888888888888888888888888888888888888788888878888888888888888888888888868888888888888888888888888888888888888888888878888888888888888888888888888888887888888888888887888888788888888888888888888888888888888888887888887888888888788888 you 8888888888888886887888888788888888888888888878888888888888888888878888888888688888888888888888888888888888888888888888887888888886888888888888888888878888 it 888888888 you 88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888878788888888888888888788888888888888888888888888888888888888888888888788888888888888888888888888888888888988888788887878886888888887888888887888888888 iui 8878888888887888888888888878888888888888888878888888888788888888i888888788888888788887888886878i888888888888878888888678888888887888884688888888887888888887887888888878888888888888878888788888878888888888i8888888888888888868888888887888888888788877887888888888888 you 887⁸⁸88⁸⁸98⁸⁸9888⁸⁸88⁸⁸⁸88⁸⁸8⁸⁸⁸⁸8⁸⁸⁸⁸⁸⁸⁸⁸⁸⁸⁸⁸88 U 8888 U⁸⁸88888887888 UK 887 U 87888888888888888⁸⁸⁸88878 UK 8877878888888888788888 UK UK 76888 up UK 8988 iui 98878 U 8878888888 you 888888 you 888888 you 868UK 878 UK 888 UK 988887878888887898888787888888878888 UK 8 U 88888 UK 87878788686878 youyou 7899 U 88788888 U 7888788 U 7888888888788 UK 8888787888898 7 788888868 UK 78 UK 88868 UK t8 UK 7798888889888868887887 you7 UK 88 youup 78878778868888 UK 788 UK UK 878979786 uh 8878 UK 809888 you 888878788887887788786787868 you 88788888 UK 8 you 87888 you U 888 you 8887888778888 UK 8 UK 8878988788 UK 878 U 8 you 978878 you 7788 UK 7878887888878787879888 iou 88787887878 iui 88 UK 87878988988788808 iui 87786 you 7 7 88 UK 77878887878 UKiui 8886887868 7 iui 8979788877 youUK 7878887888 up 788 UK UK 88 U 8878 U 8878878888 UK 878 you 88786 it 8888887 uh 8 UK 7878 UK 88 UKU 8 you 7878888888⁸8887887788 UK 888 you you 8888878 UK 8887887887887978 UKUKyou 860808887 U 87888 UK 78 UK 87UK 688886877798888 UK 97UK 78788888878788 UK 8 UK 78 you 787887887987888888798878787 iui 99uppity 8888 UK 7888 iui 8889788 UK 87887877788878 iui 88UK 89877 UK 868 7 8 U 878 iui 8 U 8 iui 8888788887987
@@blanc5522 what in the-
@@dr.vegito i didnt do that.
Why is that written on it? Don't understand..
I got an 08 Mazda 3 and this video helping me fix my holes underneath cause here in Ontario Canada you need a safety to get a car on the road and my car will for-sure not be able to pass but thank god you made a video to this I will be able to drive!
Glad the video was helpful!
Chris: *smacks car*
"This baby can fit so much structural integrity in it."
Lol
Chris: smacks car
"And don't forget to put on some safety goggles"
It didn't fold up like paper when he smacked it, so it's good.
My criticisms:
- You can use flux core for this application with the technique you've shown. It is much more tolerant to wind and contaminants and much cheaper to run.
- Your tack weld had a crater in the middle. Stay on the weld a little longer.
- Your first stitch weld had a void in the top right.
- You really should wear leather gloves for welding. Vinyl can melt to your hand and gives no protection against heat or UV cooking your skin.
Still, good stuff, enjoyed the video and you showed good technique.
Thanks for the tips!
I like potatos
@@capricol9938 Me too buddy
Your not going to want to use flux for that thin of metal, it will just create more problems with all the burn through and distortion from the heat.
Is it really okay to use flux?
Who else doesn’t have a car Buh genually enjoys his videos
I'm glad you still enjoy the videos!
ChrisFix Hi, can u please show ua how to replace Back/rear Left passenger seat belt for Toyota Camry 2001. Ur video are very clear, informatif n helpfull. Thank You in Advance.
Yes..I have a newer car but he’s so cool and everyone’s friend
Used to have a mk3 Toyota Supra that was fun to fix and work on and zoom around in, but was too annoying to be a regular car, this reminds me those times haha
Meh
FYI your mig welder’s wire spool is upside down, the wire should have a natural, strait line, for all you English speaking readers, the wire shouldn’t be bent, and is so, a little bend. For all the people who still don’t understand, the wire needs to come off the spool from the bottom on this specific welder, the manual is a true legend for dangerous equipment, look it throughout. Btw I think you had your weld settings almost perfect, if you look at the tack welds, you’ll notice a little dot, we call that a fish eye, it indicates (for me) perfect or near perfect settings, so good job man! Helpful how-to’s always are needed!
thanks for the tip!
@@chrisfix no problem, sorry if that was a bit of a smart reply, I just was trying to help out anyone with the setting up part of the welder.
Anybody else see Africa in the rust hole form the interior?
He blessed the rust down in Africa
I see Australia with an extended mag
Yes I just came to the comments to find that
Haha he made a TikTok about your comment
Damn I was gonna post this you best me
As a girl, my dad and grandpa never really included me in fixing things or working on cars as much as they included my brother. I'm now 18 and have decided to learn it on my own. Thank you for teaching me Chris :)
That's not fair.
If you were my daughter you would've been welcomed and encouraged to join under the hood and invited to get greasy with the brothers.
Ive always said every girl at least should know how an automobile mechanically basically works (how the parts interact with each other and trouble shot problems) besides put gas in it and turn the key. So they don't get ripped off if they do decide to take their car to a shop.
Good for you even if you have to research and learn on your own. Hey, just a suggestion look into learning some welding also it's useful knowledge and skill too, to go along with the automotive learning. Amazon has some welders at affordable prices. Yes welder brand seem to have decent welders at excellent prices that's good for beginner or homeowner use, with good reviews by UA-cam reviewers. Plenty of video tutorials out there. Just putting the idea out there if interested.
👍Good luck to you learning all you can.👍
@@whysoserious7014 Thank you for the support, it makes me very happy! I’ve welded a few times in school and found it very exciting and fun to learn a bunch of different techniques. My grandpa owns a welder so I might ask him if I can borrow it to practice:)
You seem like an awesome guy, and thanks for the idea!
Lol a lot of women mechanics on yt when I had to rebuild my jeep tj front end ball joints and most of the steering joints ad well I came across them I was like well if they can do it I cld attempt it. I did took advice and tricks from 6 pple 5 yrs later everything is still good
sorry for that, my dad always included me and my sister in car stuff. litterally we built a 454 at the age of 8 to soon find out the block was cracked lol.
Hmu
*"Its better to have more penetration then less"*
Wise words my friend, wise words 🙃
😊😊😊😆😆😆😆😆😷🤒💩💩💩💩
If you bottom out, it is apparently quite painful, so keep the penetration at a comfortable level for both parties.
"Its better to have more penetration than less" - wiser words
The_Hate_Inside every pro league Baller
Needs to touch base
Yewwwwwww🤣😁
I love how chris hearted this
Legend says he's still working on the turbo video today (he is)
Legend says he’s been wearing the same pair of gloves since day one
I actually go through a lot haha
Lol
@@chrisfix how many per video?
@@chrisfix plastic or rubber gloves?
other than usual that’s an unrealistic expectation unfortunately. Videos like this just take a long time to do.
Nothing revvs my engine like a hot shot of “Hey Guys, ChrisFix here!” in the morning.
lol
It revs everyones engines
Rev up your engines! It's the Chrisfix UA-cam channel!
@@chrisfix excellent video young Chris.👍👍👍
Immediate click on the video. Nothing gets me happy in the morning more than watching a Chris fix video.
I'm glad the videos make you happy!
NotSoGoodGamer18 its late where i live
You just made me super pro welder brother ! And underwater I am also now! Thanks!
Haha maybe I can learn that one day!
2020: Don't use up all your alcohol and masks!
ChrisFix: Haha angle grinder go bbbbrrrrrrrrr
seriously
hahahahha
xD
Was looking for a car literally yesterday owner said in description that there is rust under car. Made me wonder how do I fix rusty floor boards for car to pass safe inspection.Chris Fix you are amazing! so inspiring save us lots of money on repairs and gives us entertainment. I’ve been subscribed for 4 years. From my age of 14 to 18 I have watched every one of your videos. Great stuff! Thank you!
Thanks for the ongoing support! Now you'll know exactly how to fix that car!
I’m 16 and just got my license a couple of months ago and I swear, nobody has better car knowledge and car tutorials than ChrisFix. Keep up the amazing videos!
I agree with 'shawn Phto' - be independent not dependent and you will be so much better off when it comes to maintaining a vehicle.
I would add to what others said, Don't feel down when it doesn't work out the first time. If something doesn't work out, chances are there were others who have done what you're trying to do so ask around, especially on forums if one is available or a fan club of your specific car. If you give up early you will NOT improve. Also, with the skills you pick up from working on your vehicle you get a chance to find a part time job at a mechanic shop if you wanted to. Good luck!
In 2003 I was given an '87 LeBaron that needed a floor. The mechanic who taught me how to mig weld missed a lot of these tricks. If ever I have to do this again, I feel much better prepared. Thanks!
I watched this whole video and I don’t even have a car but it’s so entertaining
Yup
Same
It's just so calming and
rewarding?
In a way?
Same hahahhaa
He has good voice and speaking skills
I don't know how he does it, it's basically going to school if school could teach things properly
Lol
As someone who owns a Jeep Wrangler in the rust belt of the USA (Ohio), this video will be invaluable. Thanks ChrisFix!
Thanks a lot!
I feel ya bro both of my fenders are rusted through on my 1993 Wrangler I originally started with the other video about using about using bondo but quickly realized I needed a patch.
We refer to those welds as "Gorilla welds". Not pretty, but damn stong.
You went above and beyond the call of duty on this video. Welding sheet metal is the toughest and filming it? Damned near impossible.
Great job!
Thanks!
It’s always a good day when ChrisFix Uploads
I agree!
ChrisFix can you upload videos faster? i love your videos
chris: diy turbo kit install video coming soon.
broke carguy:
my rusty shitbox go vrooom
Broke carguy: aignt imma change my air filter
Cries in public transport
Most relatable comment I've ever seen
@@TreyCook21 stfu fucking saturated ass comment so stinky!!
@@MrWarmchocolate I'm not even sure what you mean. If it helps, for context, I have a 1995 Dodge Neon.
Seriously, you've removed all fears. i can do anything now. At home with my own tools. Thank you
Just 1 video packed with more information than others can put in 5 videos!!
Always amazing job!!
Well deserved the almost 10 million subscribers
Thank You man
You deserve every nickel you make from You Tube since your videos are dramatically practical supplemented by a wonderful personality the result of great parentage and loving grade school teachers. Chris you are a winner. Thank you for all you do and all you provide.
If Chris teaches how to weld (series), it would change my life.
That would be sick
Andrew Saavedra yes
Lotsa rust on my truck. Still gets me around in the Canadian mountains on my channel.
He did
Ima spam comments so you can be at top of the comments he needs to see this
The car:
crashed into another car and flipped over 3 times
ChrisFix:
"That's easy to fix!"
That’s tavarish
Also Chrisfix: all it needs is some soapy water
@@Ricky-1 wooder*
lol
@@Ricky-1 NO, it needs some medium strenght thread locker
Watching this 4 years later gonna do this to my truck tonight. this guys channel is the real deal
Car: has slight problem
Chris: makes whole new car
Also, isn't it funny that the shape of the hole and the shape of the cut sheet metal looks like an engine?
Lol
Project Binky would make you smile
The rusted hole kinda looks like africa
ChrisFix: *puts time, dedication, and money into making a very clear and easy to follow tutorial*
The comments: DOOD I SEE AFRICA LUL
Best comment!
Chrisfix : Hey Guys!
Neighbor : ahh shit here we go again
The neighbors kid is in blue gloves filming himself again
Lmao🤣🤣
Lol
If I was his neighbor I would set up a UA-cam channel called Neighbor of Fix (of course would blur his face out)
@E Woody well considering he lives in New Jersey and I live in Virginia so, I don't really have to worry about it.
I'd like to give u a shout out, and say thanks for what u do to help ppl out with DIY. Cause some ppl can't afford to pay a shop to do repairs or like me I'm poor and rather do my work myself on my car build. Makes u have some pride in what u do. So thanks, my man. I truly appreciate you.
Thanks a lot Mike!
The air duster tip for preserving paint was worth the like.
Thanks!
Truly a great tip! Where did you get the blower or who makes it? I could use that on particular everything I do.. haha keep up the great videos! Also the nibbler, brand?
Yeah thats good stuff
@@chrisfix at 21:35 u said "it should sound like frying bacon that sizzling sound so let's try a wire speed of 45
@@viewthoughmyeyes I've seen basement Radon exhaust fans that look a lot like that, and are 110/120v powered. If you just search for a 6" duct fan, you'll probably find what you need.
Something something hole looks like Africa.
That's what I said!!
(my comment was 1 day before yours! :D)
Came here for this. Thanks!
I bless the rains down in Africa.......or in this case the rains that caused this Africa to appear in the floor!
More like Venezuela I think
Where’s the medium strength thread locker?
:o
Lol I was thinking we mess some thing
Lol
Cian Gallagher cringe
And the breaker bar, and the torque wrench
He’s gotta be the UA-camr with the most POSITIVE feedback EVER, how could anyone do anything to harm this man in any way??
I feel like a professional mechanic because i've watched so many of Chris's videos! 😂😂
OMG AM SHOCK
Facts!
I’ve been waiting for the turbo install 😭‼️
Who’s watching without a rust hole in there car? Anyone
I'm watching without a car because I'm not legally allowed one
@@mrdino6391 same
My truck is 1yr old. I have no idea why I'm watching this video, but it's cool nonetheless.
My car as a rust hole with the exact size of the car, which means it's only void and nothingness
@@mrdino6391 pretty sure you are legally allowed to own one, but you aren't allowed to drive it ...
I’m Latin and don’t speak lot of English but I really love the way you explain in a easy way I can understand thanks so much and you got a new subscriber
Welcome aboard! Thanks a lot!
Chris's videos pop up every now and again on my feed. I'm always taken back by his level of enthusiasm. He's been doing this for years and it always seems like his first day! Nice to see someone enjoying their work so much.
I have to say, as a nurse I appreciate the PPE recommendation, far too often do people go in wearing nothing and end up with debris in the eye, or inhaling crap. Definitely subscribing.
Welcome aboard! And absolutely!
When you are done , have your friends sit in that back seat to see if the floor holds out.
Welding is one of those things that has always seemed so intimidating, but you take the mystery out of it. Now I want to try. Thanks so much for all your great videos.
That’s funny I’m intimidated by working on cars but not welding. Don’t be it’s awesome go for it especially what Chris used as a beginner
As a welder I can tell you it’s harder then it looks but also at the same time it’s not if that makes sense. In this application your welds don’t need to be great but in other fabrication you do need good welds
This is a great vid, my 95 M3 has a gnarly rust spot located right under where the battery goes in the trunk. I relocated the battery to buy some time but I hope when I get to it my repair comes out as clean as this one. You broke down the process really well and made it seem super doable and manageable to do yourself, thank you!
did ya fix it
Especially for beginners, welding should be done as a series of spot welds to fix the patch in place
If you find yourself with that “keyhole” shape burning through, definitely turn up that wire feed speed(wfs), or turn down the voltage a tad. Essentially, turning up the wfs uses more power, and “cools” the weld. And of course, turning down voltage also achieves this same effect.
Imagine banging on the finished welds to check if its solid and the welded sheet of metal just falls of....
I was thinking the same thing. If i had welded it together and banged on it just like Chris, It would've fallen out on me.
Ha! I replaced the towel rod on my bathroom a couple weeks ago, and I was able to screw the brackets into the studs instead of the rinky-dink drywall anchors the rod came with. I was bragging to my wife how strong it was going to be and thumped on it to prove my point and it fell off the wall! Turns out I didn’t tighten the set screws enough, but it was crazy embarrassing!
B J Norton.
Hope the studs stay up.
danger to manifold
At that point I’m giving up. Coming back an hour later and doing a lap weld and hope for the best 😂
Your videos are just simply the best. I remember when this video came out 3 years ago I had just finished online school and saw you posted and was so excited to watch
Little tip to make the 2 pieces line up perfectly easily and quickly. once you have the new metal roughly sized, clamp it or even tack it in place then use a cut-off wheel held on a 45* angled towards middle of the new metal and cut through both new and old. This is done to make it so you don't have a gap once it's done being cut. Works fast and it's easier to weld as it has characteristics of a lap joint.
Nice tip that is, it's a skill in it's own I guess. For a noob like me that seems hard because of the shapes and tight corners. But if you master it I imagine it get some nice fits!! If you use this technic you clamp or tack it on top of the old isn't it. First on the bottom side to draw the rough shape and then put it on top, clamp or tack it and then use your technic to cut it nice in shape. Sorry for my bad English, I hope you understand what im saying/asking! Cheers
Yep!
Are you allowing for the thickness of the cut-off wheel? Even with 45 *, you end up two edges angled a wheel thickness apart.
@@sfuchs if the new piece lays on top of the original, you'll be cutting the original more in-board, and the new will lay down onto it. Try drawing this on paper ...and you might have cutting a wood board at a 45 angle in mind where you'd end up with a gap equal to the saw blade width, but if you picture two boards laying on top of each other, cutting through both, you find the bottom board captures the top board.
As a bodywork, welder & auto spraypainter for over 40 yrs, I must commens you on your dedicación & super skill. The only thing I do different is after after identifing the rotton spot I would use cardboard as a templete to make the patch for the area to be replaced in that way you only have to make one cut.
chris fix: im also going to be installing a turbo
chris fix's mustang: so you have a turbo
And I have a supercharger for the DriftStang :p
@@chrisfix omg 🔥 can't wait to see that mustang with the supercharger!
@@TheVergil7 yeah im so excited for it
@@chrisfix that's amazing, you're full of knowledge. But since the turbo will add more air to the engine, how will you add more gas? It's fuel injected so that won't be an easy task
@@TheVergil7 big fan of the sn95 body style
What can’t ChrisFix Do? This guy does it all
lol thanks!
Rumor is he can't sing, but the rest on point!
Lol I’m waiting for the day he comes on here
“Hey guys Chris Fix here, and today I’m going to show you how to build a entire kit car from the ground up.”
I love when competent people do things for themselves and also can make a great video for others to learn from them as well! Great job man. A lot of work just comes down to having the confidence to try it. Letting people see each process is wonderful! If you can do each one you can do them all! Great job!
It's amazing how I learned to weld in a school and they never mentioned stitching to discipate heat,
Love your station always informative and well done 👍🏻👍🏻hope you are staying safe!
ChrisFix: a UA-camr
Also ChrisFix: a welder/seller/buyer/drifter/car modder/great son/repair guy/negotiator
Edit: did i miss anything?
He's also a chef and a marine biologist
Nearly there! You forgot painter x)
lol pretty much!
And a bee keeper
how did you forget the most important thing!! he's also a Fisherman.!!
I dont even have a car.
I'm on my 4th hour of binge watching chrisfix.
Chris is always so good about details when he is explaining these repairs, especially with the "what ifs ".
0.03% of dust particles: "I'm about to ruin this man's whole career."
Scrubworks it’s free real estate
Scrubworks I’ve sanded rust without any protection and it didn’t ruin my career.
Rest of the car “oh dear we are in trouble...”
"And I took that personally."
I want to gIve you a like. But 888 is just too perfect. My favourite number too
When stitch welding, there’s no shame in adding another tack in between each original tack, this really helps with heat balance to prevent warping. On top of that, it makes it so you don’t have to stop in between each bead being laid; ergo no time for a bead to get too hot resulting in burn-through. For a beginner this is good work. P.S. make sure to focus on fusing the two metals instead of being afraid of burning through, although it’s very important not to burn through, solid fusion is the main point of a weld. Nice work!
@ChrisFix today my dad had a flat tyre, so he called me down. and i have been a fan of yours for a very long time and watched a that one video where you taught us how to fix a flat tyre. the van had an extra tyre and i remembered your video. saved me and my dad so much time and by the time the mechanic team of my dad's company came, we were already finished, and i got praised!! thanks chrisfix! literally saved my dad and it just drives my dream even more to become a mechanic when i grow up
That's awesome! I'm glad the video was helpful for you and your Dad!
You are the best! I wasn’t sure about buying an old Nissan 300zx (from 1984) and now I’m confident enough to finally buy it and repair it! Thank you and keep going !!!!!!!
You can tell he's a pro, he didn't giggle once after he said "penetration."
hehehehehehe........penetration :P
Some people laugh when a comment is at 69.
I set my life on Hank Hill energy, and upvoted, so now you have 70.
You monster
Or butt weld.
Or “rust hole”
Issue: *exists on a vehicle
Christopher Fixopher: I'm about to end this things whole career
Donut Media viewer?
@@hueyrosayaga yes
@@hueyrosayaga Here and there. I called ChrisFIx this name to my friend for a while before the Donut Media video.
I’ve been waiting on that turbo install for months can’t wait for it to drop !!!
I love this man. I mean if I can’t find his diy video for something I’m trying to fix or do with my car and stuff, I get mad. Nobody explains how he does. ❤❤❤❤❤❤❤
Chris: Uses Mask
Everyone: So about finding those....
yeah, or the cleaning alcohol
Link in discription like all the used tools and products😜
Chris's racing helmet has filters that can filter 99.999992% of the air. No tire smoke for him.
@@superice321 acetone or benzene work as well.
N95 dusk mask, doesn't work for air infection.