Installing 2007-2013 GM 1500 7.5-inch Suspension Lift Kit by Rough Country

Поділитися
Вставка
  • Опубліковано 29 сер 2024
  • www.roughcountr...
    What better way to deck out your 07-13 GM 1500 you worked so hard for than with the aggressive stance and jaw-dropping ride height of Rough Country's brand-new 7.5" Suspension Lift for 2007-13 Chevy / GMC 1500 Pickups? This massive lift affords your truck the ability to run up to an impressive 35" tire on factory wheels with our unmatched front and rear high-clearance crossmembers featuring the "RCX" logo. Heavy duty upper strut spacers, a beefy lower skid plate, and a set of differential and sway-bar drop brackets are also included; designed by our in-house Research and Development team with 100% laser-cut materials for the best possible fit on your vehicle. This whopping 7" Lift also comes with a set of rear 6" fabricated anti-wrap lift blocks that offer a huge boost while helping combat dreaded axle wrap issues on inferior big lifts.
    Also included are a set of our Nitrogen charged N2 Shocks! Offering the best in balanced performance for on and off-road use, these shocks feature a 10-stage velocity sensitive valving custom tuned for this specific application. That means these shocks are specifically valved for use with this vehicle and lift combo, giving you unparalleled performance for any driving situation.

КОМЕНТАРІ • 211

  • @user-pw7dh8cb4r
    @user-pw7dh8cb4r 8 місяців тому +5

    Just want to say that i just did this lift on my buddies truck. Good luck getting the knuckle and top control arm to connect. I was 2 inches away and thought they sent the wrong struts. We used the 7.5 lift struts instead of spacers. I called rough country and ran all part numbers. I finally got it but had to use strut compressors. Pretty sure i almost met god, but i did get it.

  • @midwestcatz5896
    @midwestcatz5896 4 роки тому +21

    7.5" lift kit in 20 mins .. now that's a fast install

  • @keithnichols7339
    @keithnichols7339 3 роки тому +29

    8-10 hours the direction say...2.5 days in the average joe garage, even with a sufficiently full set of tools and that's assuming you don't sleep the first night. If you want to get this done in 8-10 hours, they should ship that second dude to you in the box so he can hold everything while you unbolt it. The main dude in the video barely has grease on his hands. By the end of of day one, the bums outside of the auto parts store didn't want to get near me because I looked too dirty.

    • @brandonbergstrom4502
      @brandonbergstrom4502 2 роки тому +3

      This comment is 8 months old and it is entirely under rated lol

    • @koltonhinton4894
      @koltonhinton4894 11 місяців тому +2

      Took me 12 hours and I’ve never put a lift on before

    • @chrissoden7939
      @chrissoden7939 10 місяців тому

      ​@@koltonhinton4894 let's see it

    • @landonwilburn7026
      @landonwilburn7026 8 місяців тому +1

      You must be inconsistent or working on a rust bucket or all in all not a mechanic lmao

  • @nickrossi6821
    @nickrossi6821 5 років тому +5

    I had a miserable time getting the upper control arm into the knuckle after the lower ball joint was installed. I had to use ratchet straps to pull the control arms towards each other just to get enough thread on the upper ball joint to grab it and suck it into the knuckle. I didn’t loosen the upper control arm during install, it would have most likely been easier that way, but there was barely any compression in the strut/spring assy to allow for installation

    • @tnuc1446
      @tnuc1446 10 місяців тому

      Need new a arms I bet ur tires wore on the inside

  • @Iflagum
    @Iflagum 3 роки тому +9

    If your going to cut the outer tie rods why not replace them with something you can grease. As this stuff gets older I see that as a problem. I would have included new inner and outer ends in the kit. Pretty cool otherwise. Sounds like it would fit a Tahoe as well?

    • @russellschroeder990
      @russellschroeder990 Рік тому +1

      I couldn’t agree more . I’m getting ready to install a RC 6” lift by myself. I already have the kit but I am replacing cv shafts hub bearings all bushing’s etc while I have it apart.

  • @Romi.Frentescu
    @Romi.Frentescu 5 років тому +34

    Losen and remove the vehicle completely. Lol

  • @kingofhearts4395
    @kingofhearts4395 4 роки тому +2

    I just picked up my 7.5 lift for my 08 GMC 1500 yesterday Tue/April/6th and I am so disappointed in it that I will be returning it. I got the old styel strut spacers, the ones that had the problems with the welds cracking when tightening the bolts and not the new styel ones, You guys really cut corners on the welding of the components, their should have been more welds, And I have never seen orange peel on powder coating so even the powder coating is the shits. I would be scared to even put this lift on my truck.

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому +2

      It appears you might have just received a bad part as that is not common on our spacers to not be sufficiently welded or manufactured. We would be glad to send you a replacement pair if you gave us a call at 1-800-222-7023

  • @jasonraper5096
    @jasonraper5096 2 роки тому

    I bought my truck 09 GMC Sierra and I’m not sure the exact lift I have but it’s a RCX Lift kit installed!! My rear blocks are 7” and front strut spacer is 6”.. 🤷🏼‍♂️

    • @MrLayne-nj9yb
      @MrLayne-nj9yb Рік тому

      I’m in the same boat, let me know if you found any helpful information!

  • @HEATHACORDLE
    @HEATHACORDLE 2 роки тому +5

    I have a 2011 z71 with the 7.5" lift kit, and was to the understanding that the stock upper control arms are ok to use, but I have gone through 2 sets of upper ball joints (moog) since installing (less than 30k miles). Should I use a different style upper control arm?

    • @keysautorepair6038
      @keysautorepair6038 2 роки тому

      Moog used to be top of the line not anymore they are garbage best to get oem.

    • @Coted1988
      @Coted1988 Рік тому +2

      Hey what did you end up doing? I have extended uppers for my leveling kit.. I'm wondering if the extended uppers will be okay to use with the new knuckles or if I need to use the stock ones..

    • @136Reid
      @136Reid Рік тому +2

      RC has new forged UCAs to help with those angles for this specific kit.

  • @Sacredo0
    @Sacredo0 7 років тому +5

    Ok two things. I wish there was a live install video for the Tahoe, Suburban, Avalanche 7.5 lift kit. The Animated one is ok, But i feel like a live one would be better suited and 2. What the heck is up with the cat meow every now and then. had me lookin for a cat in my room haha

  • @whuttontarnation2484
    @whuttontarnation2484 8 місяців тому +1

    Does this require major modification or could this easily be changed out to a smaller lift? I’m looking at a truck with this kit but the lift is too high

    • @jordanbeissel9734
      @jordanbeissel9734 8 місяців тому

      It's a 1 time lift. Theres too much modification. There's no removing it once installed.

  • @angelnuno4074
    @angelnuno4074 Місяць тому

    How the hell did you get that upper control arm in so easy, I've been struggling for hours, still can't get it in

  • @drew5992
    @drew5992 Рік тому +1

    This kit didn’t need bigger uca?

  • @mega730dude
    @mega730dude Рік тому

    Of only there was a place around here in ft wayne Indiana that installed lifts

  • @dallastate3601
    @dallastate3601 7 років тому +13

    Why are you guys trying so hard to make your voices sound cool and manly like batman? I don't see you guys fighting crime.

    • @RoughCountryTV
      @RoughCountryTV  7 років тому +31

      Because we are cool. How do you know we're not Batman?

  • @audioa7739
    @audioa7739 Рік тому +1

    Just installed this kit (7.5in w/N3 Struts) on a 07 Tahoe 4WD. I was wanting to purchase your forged upper control arms but in the description it states, Does NOT fit models with 5, 6, or 7.5 inch suspension lift kits. In a response here to another comment, you said it will. Can I get an answer on whether it will fit or not?

  • @ugeiddathlang1899
    @ugeiddathlang1899 3 роки тому +2

    Will this work for a vehicle with electric power steering

  • @boogazincorporated
    @boogazincorporated 6 років тому +2

    itd be nice to see a 00-06 tahoe rough country lift video, cant find one anywhere

    • @erikm2003
      @erikm2003 4 роки тому

      Boogaz Incorporated same thing as a pickup of that year.

  • @davidg8646
    @davidg8646 6 років тому +2

    where the front cross member is installed the upper bolts where you cut your better off welding each side it makes craking noices like hell dont know if i had wrong bolts or what threads are 1/2” inside the plate making cross member slide

  • @Matthew-np6qs
    @Matthew-np6qs 6 років тому +3

    Wish there wasnt so much cutting but will be buying

  • @KaliBlaz
    @KaliBlaz 6 років тому +2

    Can’t you guys come up with a hardware design that does not require any cutting?

    • @RoughCountryTV
      @RoughCountryTV  6 років тому +3

      That would be hard to do since we have to drop the diff so much to and have to trim for proper clearance.

    • @rcairforceone
      @rcairforceone 6 років тому +1

      It's basic physics really... 2 things cannot both occupy the same space at once. If you think this is bad, find some old 4x4 magazines and look at what it took to install early IFS suspension lifts. None of the cutting in this kit compromises strength of the chassis. The one single change I'd like to see would be a single piece crossmember. As far as I know there's only one company doing that, and their kit costs twice what this one does. This will be the kit I install on my truck when the time comes.

    • @trunkbangking
      @trunkbangking 6 років тому

      Mcgaughys lift..no cutting full 7 inch drop crossmember.

    • @internationalhunter2839
      @internationalhunter2839 6 років тому +1

      The cutting is the easiest part.....

    • @1badk20
      @1badk20 6 років тому +1

      trunkbangking......You still have to cut the crossmember like every other kit. There is no way around not cutting it, the diff will hit no matter what. You would have to drop the diff almost 15 inches to clear the crossmember bracket.
      You obviously do not own the kit, so how about doing research before you comment.
      Step 11 in the McGaughys SS 7-9" Lift
      11. On the PASSENGER side lower a-arm frame mount you
      will need to cut off 3 1/2”. Using a marker and a straight
      edge, measure and mark 3 1/2” from the edge of the frame
      mount inward and then cut with a sawzall.

  • @nateyg96
    @nateyg96 10 місяців тому

    Currently have this kit on, with no sway bar at all, to put one on, do y’all sell extended end links so I don’t have to drill?

  • @gagepruett937
    @gagepruett937 2 роки тому

    Wish RC had a sponsor budget.

  • @daviddavis3619
    @daviddavis3619 4 місяці тому

    Anyone know where I can find torqe specs for all this. Is it different from factory

  • @ramiromartinez627
    @ramiromartinez627 4 роки тому +2

    I have an 08' Silverado 2wd, and I want to install this exact lift, will it require the cutting portions?

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      www.roughcountry.com/gm-suspension-lift-kit-263.html?find=2008-chevy-silverado-1500-2wd-374116
      Here is the 2WD option

    • @justinchurch2366
      @justinchurch2366 4 роки тому +2

      Don’t....

    • @aaronabney8924
      @aaronabney8924 3 роки тому

      😂😂 jack up a 2 wheel dig

    • @Isaac-fv9gi
      @Isaac-fv9gi 2 роки тому

      Do you have to have a new drive shaft to put that lift on

  • @toddpod7581
    @toddpod7581 3 роки тому +2

    How do you align your truck after a lift install like this?

    • @somanynamesilltrythis0180
      @somanynamesilltrythis0180 3 роки тому

      You have to call around and find a shop that'll do it. I'm not sure where you live but NTB will do it.

  • @Aycr
    @Aycr 3 роки тому +1

    CV shaft angles are absolutely ridiculous. Make a better drop bracket, or we won’t buy RCX anymore. I’ve gone through 4 hub assemblies and 4 CV shaft assemblies.

    • @ac19513
      @ac19513 2 роки тому

      The diff drop brackets are to short. They should be at least 2" bigger then the cv angles would be better.

  • @policexinterceptor1
    @policexinterceptor1 4 роки тому

    Hello I have a 2007 gmc yukon xl denali will this kit fit my truck.i took off all my electronic suspension in the front and put regular struts and the same for the rear took the air shock off and put regular

  • @SeriousnessLOL
    @SeriousnessLOL 5 років тому +1

    Had this lift installed on my 08 1500 vortex Max. Pushed the breaks real hard to keep from hitting a girl running across the road. Driveshaft ended up popping out too much and when I stopped putting so much force on the break the driveshaft tried going back in but ended up destroying the slip yoke and tranny had to be replaced/rebuilt. The tranny shop said I needed a 2 inch spacer but another truck/lift shop said there’s no need for a spacer, maybe the shop that installed the lift put the blocks on backwards? SO I wanted to know if I need a spacer or a word with the guys who lifted my truck....

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      The bigger end of the block should be the rear of the vehicle. Is that the way it was installed? Do you have a 1 piece or 2 piece rear drive shaft?

    • @SeriousnessLOL
      @SeriousnessLOL 5 років тому +1

      Rough Country the blocks are installed correctly and I have a one piece driveshaft. My trucks is a 2wd

  • @mikeprimicerio4401
    @mikeprimicerio4401 3 роки тому

    Can you use this kit with aftermarket upper control arms for a 2-4" lifted truck?

  • @ILIKE2FIXSTUFF
    @ILIKE2FIXSTUFF 6 років тому +8

    7IN GM SUSPENSION LIFT KIT (14-18 1500 PU 2WD) how to

  • @hasanzero
    @hasanzero 5 років тому +3

    Assassins creed ost in the background ♥

  • @braydennewton2917
    @braydennewton2917 Рік тому

    Would you need to buy a new drive shaft for this lift kit

  • @52felix87
    @52felix87 3 роки тому

    What’s the deal about the ebrake bracket? So u just take it off then put it back on 🤷🏻‍♂️

  • @northern_decal_co.2607
    @northern_decal_co.2607 Рік тому

    What kit do I need for 2009 chevy tahoe with zw7 suspension RPO code?

  • @dewayneb.3149
    @dewayneb.3149 2 роки тому

    How would I go about a 7.5 lift on my 07 tahoe ltz with autoride?

  • @ashleydarius1
    @ashleydarius1 5 років тому

    I have a 2008 Silverado 1500 that I bought that came with a 4 inch suspension lift and I added a strut spacer so basically a leveling kit to make it a 6 inch lift now my CV angles are at an angle and was told I need to drop the front diff down more but called rough country and the front diff block spacers are the same for a 4 inch lift and the 6 inch lift? A suspension shop told me I had to just take the lift off because there was nothing I could do. I just didn’t get how a 4 inch lift and a 6 inch lift use the same size of front diff drop bracket and how the CV angles wouldn’t be different then with the larger lift ?

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      You have created the CV axle issue by adding the level kit to the 4" kit. Your best bet is to replace the 4" strut spacers with the 6" strut spacer to correct the geometry and removing the level spacer.

  • @vicenteroman5754
    @vicenteroman5754 2 роки тому

    That kit fit on a 2013 chevy silverado

  • @nathanjones1403
    @nathanjones1403 4 роки тому

    This lift was installed on a truck that I just bought, but the camber is way off on my tires if I get your longer upper control arms would that bring it back out instead of using the stock upper control arms because they rub the coil springs.

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      Our upper arms would allow for additional camber adjustment

    • @samuelrodriguez9395
      @samuelrodriguez9395 2 роки тому

      @@RoughCountryTV broooo you again. You guys told me tha I won’t, I’ll never gonna bye RC stuff, y’all don’t know how to make anything about liftkits. Twice alignment, new upper and cam plate… you just ruin my suburban

    • @RustyTurkey.
      @RustyTurkey. Рік тому

      ​@@samuelrodriguez9395 I believe that was user error

  • @joshuajones9581
    @joshuajones9581 3 роки тому

    It dont take no 20 mins to do kit on a lift a day not taking care of frame an bad parts 3 days doing it right an a week on jack stands replacing all the other bad parts you find then up date frame .some parts take longer

  • @FernandoRodriguez-ds5ri
    @FernandoRodriguez-ds5ri 4 роки тому

    You have any front wheel alignment issues?

  • @mhmd95tayem38
    @mhmd95tayem38 4 роки тому

    Does this kit can be installed cadillac escalade also?

  • @JohnnyReyGonzalez
    @JohnnyReyGonzalez 5 років тому

    On scale from 1-10, 10 being very difficult. How difficult is this for the average person who’s never done anything like this before?

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      7 but just because it's time consuming.

    • @b1782w
      @b1782w 5 років тому

      @@RoughCountryTV no welding with this kit?(about half done with vid haha)

  • @1989tico
    @1989tico 4 роки тому +2

    Looks like a fun way to lose your rear axle. I like the front end lift parts, but your rear lifts are so unsafe! Why not offer less blocks and more leaf lift.

    • @poserwanabe
      @poserwanabe 3 роки тому +1

      Because it will ride like a dump truck, this is actually better, it's safe when installed correctly.

    • @jasonbertrand8832
      @jasonbertrand8832 11 місяців тому

      My Chevy 1500 pulls 8,000 lb mini-excavators on double axle as well as fully loaded dump trailers haven't had any issues yet with these blocks my truck had now has 420,000 km and if you add more leaf springs u lose your flexibility for off-roading 2010 Silverado on a 7.5 in rough country suspension lift on 35s

    • @1989tico
      @1989tico 11 місяців тому

      I put 3500 leaf springs on my 1500 and it rides perfectly fine for me.
      I’m not a sensitive man that would complain about flexibility or rough ride nonsense, but to each their own.
      It is what it is..

  • @JohnnyReyGonzalez
    @JohnnyReyGonzalez 5 років тому +1

    If it’s a 2wd will it still require the cutting portions

    • @RoughCountryTV
      @RoughCountryTV  5 років тому +1

      2WD does not require any cutting

    • @JohnnyReyGonzalez
      @JohnnyReyGonzalez 5 років тому

      Rough Country what would you rate the difficulty on this specific truck and lift but on a 2wd for the average joe.

  • @cecyliocb
    @cecyliocb 3 роки тому

    This is a four wheel drive?

  • @outlawedbulliecampdustinbe6113
    @outlawedbulliecampdustinbe6113 2 роки тому

    Won’t this kit fit say my 2014 crew cab. Gmc z71

  • @LAWUFO
    @LAWUFO 5 років тому

    I'm very interested in this kit! However, I noticed it's advertised as "for 4WD Chevy trucks"! I own a 2008 GMC Sierra 1500 RWD. Is there a different kit for that?...Thanks......Richard

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      Yes there is a difference in the 4WD and 2WD options. Here is the link for the 2WD option.
      www.roughcountry.com/gm-suspension-lift-kit-263.html

  • @isaacsanchez5349
    @isaacsanchez5349 2 роки тому

    Does this lift require aftermarket upper control arms or can I use my stock ones?

    • @johnroyston7507
      @johnroyston7507 Рік тому

      aftermarket ones are recommended, but stock ones are still useable. it just puts more strain on them with the weird angles

  • @Isaac-fv9gi
    @Isaac-fv9gi 2 роки тому

    Do you have to buy a drive shaft for that lift

  • @SuperKick3r
    @SuperKick3r 6 років тому +1

    I bought the 6 inch do I really have to cut my tierods?

    • @RoughCountryTV
      @RoughCountryTV  6 років тому

      Yes. In order to properly align the vehicle you will have to trim the tie rods and sleeves on the knuckle kits.

    • @SuperKick3r
      @SuperKick3r 6 років тому

      Rough Country but my instructions don't say to do that?

    • @sixonebubble
      @sixonebubble 4 роки тому

      Yes. Just did mine. Instructions say cut 3/8" from inner and outer tie rod. I ended up cutting 1/2" on driver side for a little more toe in alignment.

  • @oAuzzy
    @oAuzzy 5 років тому

    Can you replace rc rear shocks with billstein or something else? Or Are they taller than normal, thanks.

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      Our shocks are taller to accommodate our kits on the vehicles. You can use other aftermarket shocks as long as they are the correct specs for the specific ride height.

  • @strNpwrKC
    @strNpwrKC 3 роки тому +1

    Are 18in+ rims required for this?

  • @Crispin_Torrealba
    @Crispin_Torrealba 7 років тому

    Me gustaria colocarle esta suspension a mi camioneta Silverado 2008, tienen vendedores en Venezuela??

  • @MrRedsox2012
    @MrRedsox2012 6 років тому

    even for a 6 inch lift kit will they be cutting and if the cutting is necessary won't that weaken the frame or something

    • @RoughCountryTV
      @RoughCountryTV  6 років тому

      You cut the tie rods and tie rod ends, crossmember pockets and diff but with this kit installed per instructions and the cutting that is needed to be done it does not jeopardize the integrity of the strength of the vehicle or frame.

    • @jsmc2104
      @jsmc2104 6 років тому

      I believe the only difference between the 6" kit and the 7.5" kit is the rear blocks, u-bolts, and strut spacers.

  • @vicenteroman5754
    @vicenteroman5754 2 роки тому

    Can i use 22 wheel rims with 35 tires

  • @javieralonzo9790
    @javieralonzo9790 5 років тому

    Any kits for the 06 4x4 silverado? Looking to get 24x14 on 35 but want minimal cutting. What size lift do you recommend?

    • @RoughCountryTV
      @RoughCountryTV  5 років тому +1

      That size tire and wheel requires a 6" lift kit to clear that tire and wheel combo

  • @dallasasher6878
    @dallasasher6878 6 місяців тому

    Everyone is asking questions that can be answered by going to their website

  • @alexesparza8468
    @alexesparza8468 4 роки тому +1

    Video I’m assuming shows reusing the stock upper control arms, i have a 3.5” kit also from RC. Can i use these upper control arms or will i have to find a stock set?

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому +1

      Yes this kit is using the stock uppers. You can use the aftermarket arms on the 3.5" and 7.5"

  • @jeremyanderson7493
    @jeremyanderson7493 4 роки тому

    how long would it take to install the 7.5 inch Suspension lift kit for a beginner

  • @2treo15
    @2treo15 4 роки тому

    Does anyone know What is the torque spec for the ubolts on a 6in on a 2009 sierra 1500?
    Just bought your Trac bar kit and don't know the torque specs?

  • @kingofhearts4395
    @kingofhearts4395 4 роки тому

    Can you run 35x12.5x20x9"on factory rims with no trimming to inner or outer fender well with this lift.

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      As noted on the site you have to run aftermarket offset wheels on that kit due to the lifted knuckles that are included in the kit.

    • @kingofhearts4395
      @kingofhearts4395 4 роки тому

      @@RoughCountryTV "I just bought black factory 20"x9" rims for $800.00 Canadian so I better be able to use them with this lift" This is off your website: Gain ride height at an incredible value with Rough Country's 7.5-inch Suspension Lift for '07 - '13 Chevy / GMC 1500 Pickup. This massive lift affords your truck the ability to run up to an impressive 35-inch tire on ((factory wheels)) with our unmatched front and rear high-clearance crossmembers featuring the "RC" logo. It says nothing at all about running aftermarket offset wheels. It also says you need a minimum of an 18'' wheel for clearance.

  • @BEAST8061
    @BEAST8061 7 років тому +1

    bought a 7.5in kit for my 08 silverado 4x4. but I need the guide for the new holes to be drilled for the swaybar inlink holes. where can I get it. link if possible

    • @RoughCountryTV
      @RoughCountryTV  7 років тому

      s3.amazonaws.com/roughcountry/install/92126400R1.pdf

  • @edgaracuna4860
    @edgaracuna4860 7 років тому +1

    will this tutorial work on a 2014 chevy 1500?? help please

    • @RoughCountryTV
      @RoughCountryTV  7 років тому

      No this one is only compatible with the 07-13. The 14-Up are a little different with the steering components.

    • @edgaracuna4860
      @edgaracuna4860 7 років тому

      Rough Country is there a video for the 14s??

    • @jamesgarland3630
      @jamesgarland3630 7 років тому

      pls make a tutorial for 2014 chevy with a 7" lift being installed

  • @justme23lol
    @justme23lol 2 роки тому

    What way do the strut spacer go? It has a angle to it on one side

    • @daviddavis3619
      @daviddavis3619 4 місяці тому

      The curved side goes into the strut housing. The flat part goes to strut

  • @1966Bclass
    @1966Bclass 8 років тому

    What wheels are they and what size ?

  • @joshuajones9581
    @joshuajones9581 3 роки тому

    Plus that you send kits out not signed for then you reside a kit all scrapped an scratched up an then dont answer calls an emails after the fact I'll never use rough country lifts again

  • @skylarjordan4803
    @skylarjordan4803 Рік тому

    do you have to cut on the crossmember if you’re 2wd?

    • @KahnanFN
      @KahnanFN Рік тому

      have you found that out yet?

    • @skylarjordan4803
      @skylarjordan4803 Рік тому

      @@KahnanFN yes you don’t have to cut anything but your tie rods

  • @tjmaxfield12
    @tjmaxfield12 4 роки тому

    You guys don’t make this lift for 03-06? Chevy 1500?

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      We do not. 6" is the biggest kit we offer for the 99-06.

  • @kawasaki000000000000
    @kawasaki000000000000 5 років тому

    Just cerious if you don't cut the tie rods and it ends can u still get it within soec

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      No. The tie rods have to be cut in order to bring into alignment specs

    • @kawasaki000000000000
      @kawasaki000000000000 5 років тому

      @@RoughCountryTV one other question with doing this and putting bigger tires on will it drastically lower towing as I have a 7x16 inclosed trailer with 2 sleds

  • @Don_OOPIE
    @Don_OOPIE 6 років тому

    is there more things I need to do to my truck to prepare for putting this in? should I regear it?

    • @northcountry4x473
      @northcountry4x473 6 років тому

      ua-cam.com/video/3Uo7AzjYXzw/v-deo.html

    • @captnhowdy01able
      @captnhowdy01able 6 років тому +1

      noah gentleman why would you have to change gears? All you are doing is raising the center of gravity of the truck. You only have to change gears If you are putting on anything bigger then a 33-35 inch tire depending on the vehicle you have.

  • @brickmason5295
    @brickmason5295 5 років тому

    Alot of important parts that can get you killed if not installed properly.. obviously you guys are extreme professionals.. but what about factory torque specs?

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      s3.amazonaws.com/roughcountry/install/92126400R1.pdf
      All torque specs are included here in the install instructions.

  • @Nymanspojken82
    @Nymanspojken82 6 років тому +1

    Whats the highest lif kit for my Avalanche -08 AWD?

    • @RoughCountryTV
      @RoughCountryTV  6 років тому +2

      7.5" is the biggest kit we offer but you will have to change out your front drive shaft to a double cardan drive shaft in order to run that kit. It will not work with the AWD

    • @Nymanspojken82
      @Nymanspojken82 6 років тому

      Thanks! And if i want to save the awd funktion? what kit can i run then?

    • @Masterman5010
      @Masterman5010 5 років тому

      Freppster By being sexy for daddy

  • @handymanservice83
    @handymanservice83 6 років тому

    How many inches are from center of wheel to fender
    Front and back
    How many inches is the total high of truck front and rear 08 silverado 2wd

    • @RoughCountryTV
      @RoughCountryTV  6 років тому

      28.5" from center of the wheel to the fender. We do not offer the total height to the top of the truck due to variation in tire sizes.

    • @handymanservice83
      @handymanservice83 6 років тому

      Rough Country i have 33/12.50/20

    • @streetclasscc5189
      @streetclasscc5189 5 років тому

      How much of a drop does the front crossmember have is it a true 6" or 8"

  • @juniormtz670
    @juniormtz670 3 роки тому

    Can I do it at my house with jacks and jack stands ??

    • @poserwanabe
      @poserwanabe 3 роки тому

      You can if you have the tools, it's not easy and requires some patience, but you'll feel great when you say " I did it myself"....
      go for it 👍

  • @manuelavila1046
    @manuelavila1046 7 років тому

    How much does the deferential drop bracket drop the deferential

  • @chrisiniguez3394
    @chrisiniguez3394 7 років тому +3

    Is there a video for 2016 2wd chevy 1500

    • @dymatizeus7699
      @dymatizeus7699 7 років тому +7

      Chris Iniguez why would you get a 2wd truck? 😂😂

    • @_dajo
      @_dajo 6 років тому

      I have a 2005 2wd surburban chevy...

  • @JimJones-ut9qi
    @JimJones-ut9qi 4 роки тому

    Is the 6” lift kit installed the same way??

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      Yes the 6" kit installs the exact same way as the 7.5"

  • @StupidHumanss
    @StupidHumanss 6 років тому

    Show bracket kit...

  • @chromedaddy5279
    @chromedaddy5279 4 роки тому

    Do y’all sale the differential drop bracket for 6” lift ?

  • @blintsy5146
    @blintsy5146 6 років тому

    Is there any modifications to steering that I will need to do?

    • @RoughCountryTV
      @RoughCountryTV  6 років тому

      No mods to steering on this particular kit.

    • @blintsy5146
      @blintsy5146 6 років тому

      Rough Country I don’t have to extend the Column?

  • @kevincromedy7354
    @kevincromedy7354 2 роки тому

    I need for my LTZ Tahoe 2007 4x4

  • @mega730dude
    @mega730dude Рік тому

    How many hours does this take ?

    • @noahzellner1242
      @noahzellner1242 Рік тому +1

      8-10 according to the website but I’d clear out at least 2-3 days

  • @kodyraymond229
    @kodyraymond229 7 років тому

    what song is that?

  • @SorinMarfa
    @SorinMarfa 11 років тому +1

    will this still be a 4x4 after u install the 7.5" kit ?

    • @rcairforceone
      @rcairforceone 8 років тому +7

      Unless you fail to reinstall the front drive shaft, it will remain a functional 4x4.

    • @internationalhunter2839
      @internationalhunter2839 6 років тому +2

      No it will be a 1×4 so you cant go offroad

  • @mikewarren8196
    @mikewarren8196 7 років тому

    I just put the 7.5" kit on my Silverado and when I was done I have an almost 2" difference in the front and rear height, the rear being lower. WHY? And how can I fix it?

    • @RoughCountryTV
      @RoughCountryTV  7 років тому

      What year model is your truck? What are your front and rear ride height measurements from center of the wheel to the fender? Not the top of the tire but from the center of the wheel to the fender. Thanks.

  • @ianpadrick4605
    @ianpadrick4605 7 років тому

    What is the measurement on that rear block?

    • @RoughCountryTV
      @RoughCountryTV  7 років тому

      7" Anti Wrap block. You remove stock block and replace it with this aftermarket block.

  • @coreywatchman4831
    @coreywatchman4831 2 роки тому

    Hi 👋 I'm interested in this how much is the kit

    • @RoughCountryTV
      @RoughCountryTV  2 роки тому

      www.roughcountry.com/gm-suspension-lift-kit-264.html#278=516&266=734

  • @skulldead3072
    @skulldead3072 4 роки тому

    for what you cut the ball joints?

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      Not sure I understand your question?

    • @skulldead3072
      @skulldead3072 4 роки тому

      @@RoughCountryTV
      I meant the cut of three eights on the tie rod?

  • @aaronabney8924
    @aaronabney8924 3 роки тому

    Whats with all these "i want a million inch lift for my 2 wheel dig Prius"

  • @alanperez9607
    @alanperez9607 6 років тому

    What if you want to go back stock? Can you go back ?

    • @RoughCountryTV
      @RoughCountryTV  6 років тому

      Once you install the 5", 6" or 7.5" you can not return the vehicle back to stock ride height.

    • @Espenrip
      @Espenrip 6 років тому

      Alan...but why go back to stock?
      Hope you got your lift...once you go there...you will never be the same...hahaha

    • @nickrossi6821
      @nickrossi6821 5 років тому +1

      Alan Perez save the piece of steel you cut off and all the stock parts, all you have to do is weld it back together. It’s an easy weld. Make sure you do your cut nice so it’s easy to refit and weld after

  • @luke_322
    @luke_322 4 роки тому

    I'm new to learning about the lift kits and such. What size wheel spacers would I need on the rear to match with the front track width once I put the lift kit on? Putting a 6" RC suspension lift. 2008 gmc sierra 1500 z71. Thanks

  • @gustavorobles5952
    @gustavorobles5952 5 років тому

    the "im poor" lift kit using zip ties tells you that it wasnt designed well and very little time was invested

    • @toymachine7135
      @toymachine7135 4 роки тому +1

      G&R MOBILE CAR WASH AND DETAILING SERVICES you my friend underestimate zip ties.

    • @poserwanabe
      @poserwanabe 3 роки тому

      Bullshit, you're clueless...

  • @mississippistrutin6264
    @mississippistrutin6264 4 роки тому

    What about a 2wd

  • @briancavanaugh4406
    @briancavanaugh4406 4 роки тому

    Now explain why the customer needs new wheel bearings! Because you destroyed them using an impact gun on the axle nut!

    • @RoughCountryTV
      @RoughCountryTV  4 роки тому

      Are you referring to the CV axle nut? Nothing wrong with using an impact on that at all when torqued to spec.

  • @lopezjude4292
    @lopezjude4292 5 років тому

    What size rear lift block comes with a 6” lift?

    • @RoughCountryTV
      @RoughCountryTV  5 років тому

      5.25" rear block on that one that replaces the stock rear block

    • @lopezjude4292
      @lopezjude4292 5 років тому

      Thank you!

  • @joshuajones9581
    @joshuajones9581 3 роки тому

    Need to put out a better video an let people know they need to replace almost every thing else with the kit add in lol put you another 3,000 up for other parts you'll need

    • @poserwanabe
      @poserwanabe 3 роки тому

      You don't need any other parts...I've installed several lifts and never needed anything else...

  • @justinmetheringham7380
    @justinmetheringham7380 3 роки тому

    Torque wheel bearing 177ftlbs???...... nah give er the ugga duggas...

  • @trunkbangking
    @trunkbangking 6 років тому

    Go mcgaughys..you dont have to cut anything!!

    • @1badk20
      @1badk20 6 років тому

      Yes you do, you cut the crossmember bracket. Obviously you do not have the kit, but in the instructions, it is step 11.
      11. On the PASSENGER side lower a-arm frame mount you
      will need to cut off 3 1/2”. Using a marker and a straight
      edge, measure and mark 3 1/2” from the edge of the frame
      mount inward and then cut with a sawzall.

    • @trunkbangking
      @trunkbangking 6 років тому +1

      Strixx well that sucks..i heard you didnt have to ..thanks for the info !!

    • @Rowdie_Rodie
      @Rowdie_Rodie 6 років тому

      Strixx could I take my rough country lift off and install my 7-9 McGaughys without any problems?

    • @1badk20
      @1badk20 6 років тому

      Yes you can. It will more or less bolt up without issue. I have personally never done this, but my shop has many of times.

  • @AmishGeneral
    @AmishGeneral Рік тому

    bro is so corny