All very interesting and I have learnt a lot. You have made my life so much simpler as this is exactly what I want to do ! Thank you! It may help if you also told us where you got the bits from, and for how much, to give us an idea. I would, however like to point out that if there is no power applied to the cable then you can cut both wires at the same time, in one go, with the cutter, and there will be no problem, no fuse will blow. The "short circuit" that you mention only happens when there is power in the circuit, i.e. the light would be on if plugged into the socket/plug but that is not the case here as the brakes light only comes on when the key is in the ignition, turned on an somebody steps on the brake. Of course cutting them separately is a good habit to form but it is also a good habit to form to always know what is going on with the circuits you are working on ,are they on, are they off etc. so then you know whether you can or cannot cut multiple wires together. I hope this helps
Hi Tommi, thanks for the message. Sure, they can be found on amazon. www.amazon.co.uk/gp/product/B092ZXG58Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Just watched this video for the 2nd time to make sure I could follow how you did it , brilliant mate. Also just ordered myself one from the link you provided 👍
love the video- lets hope its as simple when I try to replicate what you've done. One question about the trigger cable that you connect to the reverse light- why do you use the black/negative and have the red/positive connected to the other red wire? My AV connecting wire has a red wire emerging from each end that I was going to use to power the monitor via the connection to the brake light. Can I then connect the green to the reverse light via the red wire and earth the black one?
Hi Ollie, love the videos! Can I ask - is the adhesive pad for the exterior good /strong enough to create a waterproof seal? I've got visions of leaks, even if the area is prepped properly with the degreaser first. Wanted to check as it's the only hope without liquid sealant being used and I'm starting my conversion next week on a 2018 Boxer. You guys have been so helpful! Cheers Dave
Hi Dave, We haven't experienced any issues with the supplied pad, but if you wanted to use a clear bead of sealant for extra waterproofness, then that would be a quick job for peace of mind. Good luck with the build and thanks for your support.
Brilliant, great detailing. Thank you.
I love your attention to detail. Thanks for sharing that install. Clever thinking about the fuse 😉
thanks
Really good 😊
thanks man , it was very helpfull
Thanks!
Great video. Really helpful 😊
Glad it was helpful!
All very interesting and I have learnt a lot. You have made my life so much simpler as this is exactly what I want to do ! Thank you!
It may help if you also told us where you got the bits from, and for how much, to give us an idea.
I would, however like to point out that if there is no power applied to the cable then you can cut both wires at the same time, in one go, with the cutter, and there will be no problem, no fuse will blow. The "short circuit" that you mention only happens when there is power in the circuit, i.e. the light would be on if plugged into the socket/plug but that is not the case here as the brakes light only comes on when the key is in the ignition, turned on an somebody steps on the brake. Of course cutting them separately is a good habit to form but it is also a good habit to form to always know what is going on with the circuits you are working on ,are they on, are they off etc. so then you know whether you can or cannot cut multiple wires together. I hope this helps
Thanks so much for this video! Can I ask where do you source your reverse camera kits from?
Hi Tommi, thanks for the message. Sure, they can be found on amazon.
www.amazon.co.uk/gp/product/B092ZXG58Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Just watched this video for the 2nd time to make sure I could follow how you did it , brilliant mate. Also just ordered myself one from the link you provided 👍
Hi, where did you get the camera from? Thanks
Excellent video keep up the good work 🎉 Where did you buy the camera from?
Thanks it was amzn.to/3GbOM63
Can you use also the wago connectors for the installation?
yes they work
love the video- lets hope its as simple when I try to replicate what you've done. One question about the trigger cable that you connect to the reverse light- why do you use the black/negative and have the red/positive connected to the other red wire? My AV connecting wire has a red wire emerging from each end that I was going to use to power the monitor via the connection to the brake light. Can I then connect the green to the reverse light via the red wire and earth the black one?
Where was the live feed taken from you mentioned fuse box can you not splice into van interior light?
Was thinking the same! Did you work it out? I’m about to do this install myself and have no clue!
Can the reversing camera be used as a rear viewing camera whilst driving, if it has a switched live??
Yes it can be turned on permanently to display what the camera sees, however in this position it looks straight down to the rear bumper/floor
is there a sprinter version of this video?
Nice video man! Any specific reason you're connecting the device to you household battery and not the starter battery?
Just so that it does not gradually drain the starter battery as it has a small constant level of power consumption
Hi Ollie, love the videos! Can I ask - is the adhesive pad for the exterior good /strong enough to create a waterproof seal? I've got visions of leaks, even if the area is prepped properly with the degreaser first.
Wanted to check as it's the only hope without liquid sealant being used and I'm starting my conversion next week on a 2018 Boxer.
You guys have been so helpful!
Cheers
Dave
Hi Dave, We haven't experienced any issues with the supplied pad, but if you wanted to use a clear bead of sealant for extra waterproofness, then that would be a quick job for peace of mind. Good luck with the build and thanks for your support.
@@vanlifeconversions great thanks for replying!
🎉😊
Would have been nice to see it all working at the end
Thanks for the feedback! Will do next time
Coding?