How To: Take Apart Your Fiat Ducato, Peugeot Boxer or Citroen Relay's Dashboard (Beginners Guide)
Вставка
- Опубліковано 30 чер 2024
- How To: Take Apart Your Fiat Ducato, Peugeot Boxer or Citroen Relay's Dashboard (Beginners Guide)
This is a simple beginner's guide to show you the basics of "How To" take the dashboard apart in a Fiat Ducato (or a similar process for Peugeot Boxer, Citroen Relay).
James guides you through how to carefully take each part of the trim off one by one and provides tool information, tips and some handy tricks of the trade.
If you are interested in doing some wiring behind the scenes or want to try and fit an aftermarket product yourself, then this video could be a massive help to you. Don't be afraid to DIY!
See the steps below:
00:00 - Start of Video.
Step 1 - 00:30 - Introduction.
Step 2 - 01:23 - How To: Remove the top glove box.
Step 3 - 03:22 - How To: Remove the factory radio unit.
Step 4 - 06:53 - How To: Remove the top tablet/map holder.
Step 5 - 09:54 - How To: Remove the air vents.
Step 6 - 13:33 - How To: Remove the gear stick gaiter and lower compartment.
Step 7 - 17:39 - How To: Remove the factory radio fascia.
Step 8 - 19:33 - How To: Disconnect the window blind from the factory radio fascia.
Step 9 - 21:47 - How To: Remove the speedometer and Vehicle Menu button panel by the steering wheel.
Step 10 - 26:36 - Sign off.
--
Check us out on our Social Media Links below to see what we're getting up to:
Instagram - / motorhome_retrofits
Facebook - / motorhomeretrofits
Get in touch with us:
Website - motorhomeretrofits.co.uk/
--
Specialists in The Retrofit & Upgrade of Motorhome Technology including 360 Degree HD Camera Parking & Dash Camera Systems | Navigation | Multimedia | Apple CarPlay & Android Auto | Amplified DAB & FM Antennas | Reversing Cameras | Mobile WiFi | Vehicle Tracking & Immobilisers | Digital Televisions & Soundbars | Freeview TV Antennas | Daytime Running Lights | Safes/Key Boxes & Habitation Door Locks | Solar Panel Installation | USB Power Hubs/240V Sockets & much more!
#MotorhomeRetrofits #howto #fiat #fiatducato #peugeot #peugeotboxer #citroen #citroenrelay #diy #dashboard #takestuffapart #motorhomeadventures #motorhomelife #motorhometravel #Motorhome - Авто та транспорт
Excellent, thanks for sharing
Hi, this was a really useful video, many thanks. Would it be possible to show how you remove the remaining dash parts to the right of the steering wheel, cheers
Excellent video. Looking forward to the next one.
Thanks! Exactly the instructions I needed to take off all that stuff
Very helpful video, i'm planning to put some switches near the wheel for the high beam i want to put and my rear lights, i'm sure it's pretty much the same on a left hand drive peugeot boxer, thanks a lot sir !
great video that's very helpful - thanks. I can't help noticing that this and the other howto video are amongst your most popular. I was trying to figure out how to remove my lower cup holders so I could route some USB cables more neatly and managed to figure it out based on your other video but a video about how to remove lower parts of the dashboard might be good as well 😊
Hi, thanks for your comment, we've already done a video on how to fit the cupholders, eventually we'll do one replacing them but you could watch the steps in reverse for the same effect.
Excellent video, so many screws to find and remove really good to see how it is all put together, a question please, my 2010 Peugeot Boxer Autocruise has an alarm issue and the main alarm unit( Meta) is fitted to the bulkhead, how much further would I need to go to access the bulkhead and remove the unit for repair? Thank you
Very useful video. Thanks. How do you take apart the two big round buttons (temperature and recycling/air location), and with what kind of tools ? My temperature button cannot go to the cool side, only to the warm side :)
Brill video
Excellent clip, nice work.
Have you made the following clip yet?
I am replacing the air conditioning evaporator and need to remove the entire dashboard.
I am now at the stage at which you finished your clip and I cant figure out how to get the dash out.
I have disconnected the air bag but the dash board appears to be clipped in along the base of the windshield. I assume I would need to lift the dash to separate the clips but do not want to use to much force just in case.
I am also concerned that I may have to remove the steering wheel to get the dashboard out.
Ans assistance would be greatly appreciated.
Cheers from Australia.
Peter.
Hi peter, we will be working on this very soon, it's been a busy time for us but we have other new content you may find helpful in the meantime.
How do you take the fuse side panel off were your right nee will be