Embarrassingly I just finally flown a maiden flight with this. I did find poor solder joints on the battery leads. Both ends. One was found prior to flight and the other after a crash. I replaced the connector. Flies very well. Not liking the stock props on it but flies great otherwise. I'm going to switch out for my favorite Nazgul props and see how I like it.
Hey bro quick question...you know on the FC the 3 tiny pads(inverter) you have to bridge 2 for either Sbus or ibus? For ibus I bridge the middle and right pads right? EDIT: I read further in the comments and saw your other video getting a FLYsky receiver wired up and you explain it in that video. Thanks brother. 🍺🍺
Thanks! :) And yes it's a great price. I hope it stays that way. And I hope their individual component prices stay in line with their assembled drones. That's something I disliked about the Tyro line. If you have to replace any of the parts, the price goes way up. Lol. Not really a deal-breaker as the price is so attractive you'd do alright buying a second one for spare parts. ;)
Я использовал Fli14+ приёмник для FlySky он достаточно маленький чтобы поставить за камерой. Спаять PPM контакты на плате. В Betafly UART включиться автоматически. В приёмнике выбрать IBUS. И всё.
I haven't had any problems with the Tyro's electronics. As for the Darin, so far yes, I absolutely would recommend it. The build looks solid, lots of space for a receiver, everything is easily accessible. Not going to need a huge teardown for any repairs you may need to make.
Waaaaaaayne Steeevenson! I got this one too. I actually would like to see it fly; have you got it in the air yet? what are your opinions about the stock tune from the factory?
I haven't. We've been in the middle of a polar vortex this week also. Hit -47C this morning with the wind chill. I'm sending mine as soon as it warms up a bit. We're looking at -7C next week so fingers crossed. :D
@@TheWayneStevenson Wow...! That is cold. -9c right now by me in middle of America, and not looking to be any higher than that for the next 10 days to so. I hear ya on the cold/snow, we both need it go away. I'm thinking of taking the AIO board trying that out in an 85mm whoop.
Thanks. I'll look into that. Sound has been a challenge for me. Lol. Some videos it's way too loud, some way too quiet. I use several different mics depending on what I'm doing so perhaps I have to sit down and adjust my pre-sets again.
nice ! I look forward to see your flight footage and thoughts after this !
Embarrassingly I just finally flown a maiden flight with this. I did find poor solder joints on the battery leads. Both ends. One was found prior to flight and the other after a crash. I replaced the connector. Flies very well. Not liking the stock props on it but flies great otherwise. I'm going to switch out for my favorite Nazgul props and see how I like it.
Hey bro quick question...you know on the FC the 3 tiny pads(inverter) you have to bridge 2 for either Sbus or ibus? For ibus I bridge the middle and right pads right? EDIT: I read further in the comments and saw your other video getting a FLYsky receiver wired up and you explain it in that video. Thanks brother. 🍺🍺
Whoa, that thing looks pretty nice. You're right, that's a fantastic price. Great review!
Thanks! :) And yes it's a great price. I hope it stays that way. And I hope their individual component prices stay in line with their assembled drones. That's something I disliked about the Tyro line. If you have to replace any of the parts, the price goes way up. Lol. Not really a deal-breaker as the price is so attractive you'd do alright buying a second one for spare parts. ;)
подскажите как можно подключить на прямую такой дрон как Darwin fpv используя пульт FlySky i6s? и как подключается FPV камера?
Я использовал Fli14+ приёмник для FlySky он достаточно маленький чтобы поставить за камерой. Спаять PPM контакты на плате. В Betafly UART включиться автоматически. В приёмнике выбрать IBUS. И всё.
Nice vibes 🎉 subbed ya 👊🏼
I added a FrSky RX on mine, got it to bind, but can't get it to talk to the FC. What UART port did you use?? I assume you are using S-Bus?
I used an iBus receiver. So it went on a non-inverted UART pad.
Please post some footage videos. how does it fly.. flight time with 4s battery etc..
I sure will!!! Give me time!!! ;)
Cool video bro. Bro what receiver you use for the darwin 79. I want to get my first drone need you help. Thanks
Muy buenas
Lleva la electronica del tyro?
Dicen que no es muy buena.
Y recomendaria el darwin79?
I haven't had any problems with the Tyro's electronics. As for the Darin, so far yes, I absolutely would recommend it. The build looks solid, lots of space for a receiver, everything is easily accessible. Not going to need a huge teardown for any repairs you may need to make.
Ok muchas gracias por todo
@@ivanfpv1767 De nada!
I like 3-in drone so I think they're a little bit easier to fly, a little more forgiving
Yes. Lol. I like the fact that they tend to bounce more than shatter. ;)
Yea that's a great price. I was hoping to see a flight, but you said snow , we have lots in Edmonton too, only flying in the house.
Lol. Most days it's not the snow. It's the cold. ;) And it's been plenty cold the last week or so. I'm actually just 15min. north of Edmonton myself.
Lool CCW Nutz? Loool
Could you put GPS on it or would it have an issue
Shouldn't be an issue at all. Plenty of room on this.
Can u do a video on how to solder on a reciever and if u need to do anything on betaflight as well thx
Will do! Stay tuned!!! :)
I uploaded a video for you.
@@TheWayneStevenson thx bro
No prob. ;)
Nice review! I would love to see a flight review if you get the chance.
Thanks. Glad you enjoyed. I'll be taking it for a rip real soon! :D I have a lot of flying to catch up on. :P
Is any one know where's to get the .stl file of darwin 79?
Can i fly this with Flysky fs-i6X?
Absolutely. You just need a Flysky receiver attached to it.
ua-cam.com/video/j2Xy2ZnWsNQ/v-deo.html
Waaaaaaayne Steeevenson! I got this one too. I actually would like to see it fly; have you got it in the air yet? what are your opinions about the stock tune from the factory?
I haven't. We've been in the middle of a polar vortex this week also. Hit -47C this morning with the wind chill. I'm sending mine as soon as it warms up a bit. We're looking at -7C next week so fingers crossed. :D
@@TheWayneStevenson Wow...! That is cold. -9c right now by me in middle of America, and not looking to be any higher than that for the next 10 days to so. I hear ya on the cold/snow, we both need it go away. I'm thinking of taking the AIO board trying that out in an 85mm whoop.
I think ur sound had to more louder n ur video of how to setup reciever the sound was too low
Thanks. I'll look into that. Sound has been a challenge for me. Lol. Some videos it's way too loud, some way too quiet. I use several different mics depending on what I'm doing so perhaps I have to sit down and adjust my pre-sets again.
Внятно ипонятно говоришь человек
подскажите как можно подключить на прямую такой дрон как Darwin fpv используя пульт FlySky i6s? и как подключается FPV камера?