![FPV DroneWorks](/img/default-banner.jpg)
- 44
- 171 094
FPV DroneWorks
Canada
Приєднався 19 гру 2019
FPV Droneworks and Automation is dedicated to drones, 3D Printing, CNC, and any other type of automation for the modern hobbiest!!! Like the videos that inspire you, subscribe to stick with me, and smash that notification bell so you don't miss any wacky adventures!!! THANKS FOR WATCHING!!!! :D
3D Printed 3" Ducted Cinewhoop Drone Build: The Conclusion.... Or is it???
I finally completed my 3D Printer Cinewhoop build. Check it out!!!
You can watch my original video here: ua-cam.com/video/lNannqguvdQ/v-deo.html
These parts should be compatible. The 20A Jhemcu AIO doesn't seem to be available anymore, nor the Fyujon V1. I've linked their 40A, and Happymodel's newer Fyujon V2. You may need to re-drill holes to fit your stack if you go with the ones I used.
You'll also need to adjust your Betaflight tune, and your rates. My rates were set a little higher than should be for a Cinematic flight.
Emax ECO1407 3300kv Motors: s.click.aliexpress.com/e/_DdiS611
HQProps Duct-3 Cinewhoop Props: s.click.aliexpress.com/e/_DkzZ07V
JHEMCU GHF411AIO s.click.aliexpress.com/e/_DBNpFbt
HappyModel Fyujon V2 2in1 ELRS Receiver and VTX s.click.aliexpress.com/e/_DnC7gNv
Runcam Nano 2: s.click.aliexpress.com/e/_DefJR6X
RP SMA VTX Lolipop Antenna: s.click.aliexpress.com/e/_DCglJ2J
50CM RP-SMA Female Bulkhead to IPEX1 Female Cable: s.click.aliexpress.com/e/_DkdmDk7
I 3D printed a Rimzler Dison Cinewhoop FPV drone frame on my Geeetech A20M 3D printer. This was my first crack at using the dual extruder mixer gradient feature to give me a two tone gradient from bottom to top. I printed the frame in PLA, and on my Prusa MK3S clone, I printed the top cover, action cam mount, and FPV camera mount in TPU.
Rimzler Dison Cinewhoop Frame: www.thingiverse.com/thing:3492360
You can watch my original video here: ua-cam.com/video/lNannqguvdQ/v-deo.html
These parts should be compatible. The 20A Jhemcu AIO doesn't seem to be available anymore, nor the Fyujon V1. I've linked their 40A, and Happymodel's newer Fyujon V2. You may need to re-drill holes to fit your stack if you go with the ones I used.
You'll also need to adjust your Betaflight tune, and your rates. My rates were set a little higher than should be for a Cinematic flight.
Emax ECO1407 3300kv Motors: s.click.aliexpress.com/e/_DdiS611
HQProps Duct-3 Cinewhoop Props: s.click.aliexpress.com/e/_DkzZ07V
JHEMCU GHF411AIO s.click.aliexpress.com/e/_DBNpFbt
HappyModel Fyujon V2 2in1 ELRS Receiver and VTX s.click.aliexpress.com/e/_DnC7gNv
Runcam Nano 2: s.click.aliexpress.com/e/_DefJR6X
RP SMA VTX Lolipop Antenna: s.click.aliexpress.com/e/_DCglJ2J
50CM RP-SMA Female Bulkhead to IPEX1 Female Cable: s.click.aliexpress.com/e/_DkdmDk7
I 3D printed a Rimzler Dison Cinewhoop FPV drone frame on my Geeetech A20M 3D printer. This was my first crack at using the dual extruder mixer gradient feature to give me a two tone gradient from bottom to top. I printed the frame in PLA, and on my Prusa MK3S clone, I printed the top cover, action cam mount, and FPV camera mount in TPU.
Rimzler Dison Cinewhoop Frame: www.thingiverse.com/thing:3492360
Переглядів: 548
Відео
Everything You Need To Know About Flysky FS-i6, FS-i6X and iBus Transmitters and Receivers!!!
Переглядів 29 тис.Рік тому
The definitive FPV setup guide to the FlySky FS-i6, FS-i6X, and the FS-i6S transmitter. I'll show you what receivers to buy, which ones not to buy, how to connect it to your flight controller, how to wire your receiver, how to set up Betaflight for using an iBus serial receiver. This video covers everything with a bit of troubleshooting!!! You seriously need to watch this video before you buy y...
THE BEST DIY 3D Printer Filament Dryer: Use your FOOD DEHYDRATOR in minutes WITH NO MODIFICATION!
Переглядів 3,1 тис.3 роки тому
In this short video I'll show you how to EASILY use a home food dehydrator to dehydrate your 3D printing filament so you don't have to purchase an expensive 3D filament dryer!!!
RC Receiver: I'll walk you through installing a Flysky receiver on a Betaflight Flight Controller.
Переглядів 2,7 тис.3 роки тому
I'll show you how to not only install the Flysky RC Receiver onto a Betaflight flight controller, but I'll also show you how to wire up a custom JST plug, as well as show you where to solder your wires to. I show you everything here to properly connect and use your RC receiver! -=DarwinFPV=- Darwin FPV Darwin79 Unboxing: ua-cam.com/video/a-ma_Urbg-c/v-deo.html DarwinFPV's Darwin79: s.click.alie...
DIY Barrel Sauna Build: I'll SHOW you How You Can Make Your Own BARREL SAUNA from regular stud wood!
Переглядів 17 тис.3 роки тому
I'm going to walk you through my build process from start to finish, and go into every bit of detail you'll need to be able to build your own DIY barrel sauna in your own back yard! The community saunas and steam rooms may be closed, but that doesn't mean you can't enjoy the many benefits of sitting in a sauna! Take control of your happiness, take control of your health, take control of your li...
I Unbox one of the CHEAPEST 3" FPV Freestyle Drones. It isn't the Tyro79. DarwinFPV's Darwin79!!!
Переглядів 4 тис.3 роки тому
My DarwinFPV Darwin79 3" FPV Freestyle Drone just arrived, and I unbox it and go over the specs with you, and check out the build details!!! This little guy is awesome!!! DarwinFPV's Darwin79: s.click.aliexpress.com/e/_9jtvbN Eachine's Tyro79: s.click.aliexpress.com/e/_AYEK2f DarwinFPV: www.darwinfpv.com/ (Currently under construction (Jan 2021)
How SETUP your GPS Receiver in BETAFLIGHT! LEARN how to CONNECT the BN-220, Neo-6M, and GN-801!
Переглядів 1,7 тис.3 роки тому
I'm going to walk you through on my test bench, how to connect the Beitian BN-220, the TOPGNSS GN-801, and the Ublox Neo-6M and other standard GPS modules to your Betaflight flight controller! I'll also give you some troubleshooting tips!
FPV Rates Explained: What is RC RATE, SUPER EXPO RATE, RC EXPO, Throttle EXPO you ask? I TELL ALL!
Переглядів 1,2 тис.3 роки тому
In this video I'm going to take explain what RC Rate, Super Expo Rate, RC Expo, and Throttle Expo are in your flight controller settings like in Betaflight or in simulators. I also show you examples of the settings being used!
I build the MPCNC. A DIY Mostly Printed CNC Milling Machine. A complete Build Log for you to watch!
Переглядів 3,2 тис.3 роки тому
Follow along as I go through my MPCNC (Mostly Printed CNC) build from start to finish. I cover all the important points of the MPCNC Assembly. The MPCNC is a home made / DIY CNC machine capable of using anything from a router spindle, plotter pen, drag knife, or even a laser cutter. Mine uses a router spindle for milling wood and even soft metals. I'm using TMC5160 Trinamic Stepper Drivers with...
SAVE YOUR LIPO! Fix Your Broken Lipo Battery Balance Plug. SN-01BM crimper / JST HX2.54 Tutorial.
Переглядів 1,2 тис.3 роки тому
In this video, I'll walk you through crimping XH2.54 connectors onto wires to replace your damaged Lipo balance connector plugs, or building stepper motor wire extension harnesses. These HX2.54 terminal connectors are also used in a lot of other electronic projects so this video might also be of use to you! Enjoy! Items Needed: SN-01BM Crimping tool, HX2.54 Connectors, Pin Inserts. SN-01BM Self...
Betaflight Flight Modes: A Tutorial On Setting Aux Channels To Flight Modes, and switch assignment!
Переглядів 3,6 тис.3 роки тому
In this video, I'll show you how assign aux channels in Betaflight, to flight modes. For those of you that own Flysky transmitters, I also show you how to assign your channels to the switched on your transmitter. -=FLYSKY FS-i6 Transmitters=- Everything You Need to Know about the Flysky FS-i6 Transmitter: ua-cam.com/video/cR1CX8fdgac/v-deo.html Setting your Flysky Aux channels and Betaflight Mo...
I Unbox and Review The NEW Eryone ER-20 3D Printer!
Переглядів 2,2 тис.3 роки тому
Tune in to watch me unbox, assemble and review this Brand New 3D Printer model from Eryone. The ER-20!!! This great little machine has all you could ask for in a 3D printer. Check out my video to get all the details!!! Eryone ER-20: Amazon US: amzn.to/35B5FFY Amazon Canada: amzn.to/3f14S42 Metric Hex Screwdriver Set: Aliexpress: s.click.aliexpress.com/e/_9wUW5C
The BEST FPV Drone Simulators That Came Out This Year! Orqa FPV Skydive, CurryKitten, and AccrO!
Переглядів 1 тис.3 роки тому
A brief follow-up to one of my first videos "The BEST FREE FPV Drone SIMs! And Some Paid. I show you the TOP 10 of 2020!". Bringing you ALL up to date before 2020 comes to an end. And just in time for "Sim Season' (WINTER). If you're looking for some fresh scenery to fly in, or perhaps a great deal, check out three that just came out this year that I think are worth your time, and perhaps your ...
Eryone Thinker SE Unbox, Assemble, and Review! Check out this amazing, and affordable 3D Printer!
Переглядів 2,6 тис.3 роки тому
I bought the Eryone Think SE in September, and have been using it for the last couple weeks printing everything from Low Poly Pokemons, 3D Benchys, desktop wiring grommets, Halloween decorations, and an assortment of other fine prints. In this video I go through the unboxing, assembly, and also give a quick review and some setup / operation pointers. Have a look!!! Eryone Thinker SE: Amazon US:...
Do You Love Pink? I think I DO now!!! I tried out some Pink Silk PLA from Eryone and it's GORGEOUS!
Переглядів 1803 роки тому
My first time printing with Silk PLA and I think I've found a new favorite! I brought this stuff in to print a vase and some pink trinkets for my wife. I think she's going to love it! Check out my experience with it now! Amazon USA: amzn.to/3iws6iP Amazon Canada: amzn.to/3njwiFV
PROBLEMS Troubleshooting Your 3D Printer? Maybe YOU DON'T know your equipment well enough!!!
Переглядів 973 роки тому
PROBLEMS Troubleshooting Your 3D Printer? Maybe YOU DON'T know your equipment well enough!!!
Printing TPU Filament with a Bowden Tube 3D Printer? Nailed it! Well, it's functional!!!
Переглядів 4,9 тис.3 роки тому
Printing TPU Filament with a Bowden Tube 3D Printer? Nailed it! Well, it's functional!!!
3D Printing a Cinewhoop FPV Drone Frame: I get started on a Rimzler Dison 3" Cinewhoop Build
Переглядів 6 тис.3 роки тому
3D Printing a Cinewhoop FPV Drone Frame: I get started on a Rimzler Dison 3" Cinewhoop Build
Geeetech A20M 3D Printer Unbox, Assemble, and Review! Are 2 Extruders Worth The Hassle? Find out!!!
Переглядів 1,6 тис.4 роки тому
Geeetech A20M 3D Printer Unbox, Assemble, and Review! Are 2 Extruders Worth The Hassle? Find out!!!
HGLRC DJI Zeus F722 Flight Controller: Is this STACKABLE FPV FC WORTHY to put into the air?
Переглядів 1,5 тис.4 роки тому
HGLRC DJI Zeus F722 Flight Controller: Is this STACKABLE FPV FC WORTHY to put into the air?
BUYER BEWARE: You either have GREAT customer service, OR YOU DON'T! Does PISHOP.US and BUYAPIE.CA?
Переглядів 9254 роки тому
BUYER BEWARE: You either have GREAT customer service, OR YOU DON'T! Does PISHOP.US and BUYAPIE.CA?
DROP shipping NIGHTMARES! Six BIGTREETECH SKR v1.4 Turbo boards ARRIVED and I have no idea why!
Переглядів 1044 роки тому
DROP shipping NIGHTMARES! Six BIGTREETECH SKR v1.4 Turbo boards ARRIVED and I have no idea why!
Filament Friday: MY FIRST GLOW JOB!!! I tried out Eryone GLOW GREEN Glow In The Dark Filament. FUN!!
Переглядів 6554 роки тому
Filament Friday: MY FIRST GLOW JOB!!! I tried out Eryone GLOW GREEN Glow In The Dark Filament. FUN!!
Don't damage your motor bell! The #1 Secret for Loosening your FPV DRONE PROPS nobody talks about!
Переглядів 2224 роки тому
Don't damage your motor bell! The #1 Secret for Loosening your FPV DRONE PROPS nobody talks about!
Unboxing the Bigtreetech SKR v1.4 Turbo 3D Printer Control Boards. LOVE the boards AND the ducks!!!
Переглядів 3314 роки тому
Unboxing the Bigtreetech SKR v1.4 Turbo 3D Printer Control Boards. LOVE the boards AND the ducks!!!
My FIRST THOUGHTS on Geetech Transparent PLA Filament for 3D Printers!!! IS IT EASY TO WORK WITH?
Переглядів 3 тис.4 роки тому
My FIRST THOUGHTS on Geetech Transparent PLA Filament for 3D Printers!!! IS IT EASY TO WORK WITH?
Is it SAFE to order electronics from Aliexpress China?!?!?! Will You lose your MONEY?!
Переглядів 1084 роки тому
Is it SAFE to order electronics from Aliexpress China?!?!?! Will You lose your MONEY?!
DO NOT buy a FLYSKY Transmitter WITHOUT Watching THIS VIDEO!!!
Переглядів 39 тис.4 роки тому
DO NOT buy a FLYSKY Transmitter WITHOUT Watching THIS VIDEO!!!
BETAFLIGHT on your NAZE32!!! I show you how to EASILY upgrade your firmware on it FOR FREE!!!
Переглядів 17 тис.4 роки тому
BETAFLIGHT on your NAZE32!!! I show you how to EASILY upgrade your firmware on it FOR FREE!!!
The NUMBER ONE soldering tip that YOU NEED TO KNOW NOW!!!! I share it with you!
Переглядів 1204 роки тому
The NUMBER ONE soldering tip that YOU NEED TO KNOW NOW!!!! I share it with you!
ZOMG you're a lifesaver!! I did need to pull the old 10.7 version of the Configure app that you're using in the video; the latest 10.10 as I write this won't talk to this old firmware. But that's fine, it works! And no more fighting with the old Chrome app that doesn't like Windows anymore.
G’day mate ,do you have any experience using Ardupilot ? I’m trying to connect my Rc to my Fc Orange cube plus and I can not succeed, any advice or suggestions ?
Please Sir tell me how to increase the PPM signal from 8 to 10 in the FlySky-i6x transmitter?🙏🙏
flash it with opentx
@@8bitchiptune420 okay thank you Sir
Sir your video is helpful but I have a problem. I have this setup per your instructions but the thing is I have 4 servos connected to the receiver at channels 1-4 but 2 of of the servos will not stop spinning, if I connect just to of the servos to channel 1 and 2 the servos work fine, if I connect a third servo it will spin without ever stopping and if a fourth servo same thing happens. I checked that spinning servo on channel 1 it works fine it is just we I connect more than 2, the other servos start spinning, they have said on research that I have continuous servos but the first 2 servos I connect turn as per my specifications and do not spin it only happens when connecting to more that 2 channels. Please if you can give me some guidance on this. FLYSKY I6X and receiver is FS-I6AB, I am pulling my hair out on this, well not really since I don't have any. HELP ME if you can?
I got the st8 receiver , and I want to use it on a warbird that has a 4000 4s pack , I connect it but no light comes on the receiver
Brother, I don't need to watch you pop your fucking collar twice. I'm here to see if the $60 amazon TX is worth the money. Fucking get on with it.
Lol. If you couldn't tell it's worth the money by the amount of TXs hanging around my neck there's not enough collar pops in the world to help you. 🤣
@@TheWayneStevensonye this man doesn’t get your humor is supposed to be serious but also funny
Can any of these 3 transmitters bind to xk a800 glider?
It will
Hi. I own a FS-i6 transmitter and FS-iA6B for my DF95 racing sailboat. I want to add a FS-IBG01 GPS sensor to the system. Can I do this directly, or do I need a whole new transmitter/receiver system?
Hi there. This is 2nd time trying to use the IA6B receiver and can not get it to work with FS-I6 xmitter. Always used IA6 rec'r. Did you do something special? Joe
love your content! If you are interested, could you please collab with us!
Thank you I learned a lot
Bro all I'm getting is cli on the f1 blue pill chip, see if you can get pass this and let me gno, 👌👌✌
vanhalla vanhalla you a god bro...
I think using cling film is a great idea, since it avoids destroying tha trays. Thank you!
I HATE cats
Pwm has its uses
Has anyone worked out how to use the fs-i6 for headtracking?
want to fly airplaness with fly sky (long range) can you furnish a link .
Thank you for your video it really helped me
What about the truck semi
Hy mate. Sadly I tried everything.. Just doesn't want to bind! I'm going crazy here... It's already on a novomodel little boat for laing down the hook bait. It worked all fine. Than a little water in the remote. I close it, dry it out. Sarted on. And reset because didn't wanted to connect to the satelit. Than tried to rebind.. Doesn't want to work. Please help me! Thank you.
thank you SO much!! my motor came with all sorts of extra washers and things I had no idea what I was doing wrong!! So glad I just needed to righten more.
Does the FS-i6 have a stability gyro mode?
Hola buen video,pero es facil de manejar esta impresora 3d o no me la recomienda ?soy principiante saludos desde Elche Alicante 🇪🇦
The Stoton gn801 what size is the connection wire looks very small?
Still works after 4 years :) Dusted off my old drone and needed a quick fix as this board still has hours of flying to to :D
how did you connect it to the stm32 software, my pc cant find the board
Id like to kno as well
Your cat is awesome!
so what was the solution, cant waste 10 min for that
Good afternoon, can you teach me how to connect transmitter to a drone , ehang ghost drone 1.0 im from Philippines
Dude, you wasted far too much of my time pretending to be a TV star on youtube. The crap at the start with the clothes... pathetic at best. Then you go into telling us what you think you are going to do in the video... Ill never know because you have wasted your time already.
THANK YOU FOR THIS VERY HELPFUL RECORDING. Regards.
You completely lost me at 2o mins with swapping receivers and disjointed info- sorry but up until then all was good.
The FS-iA6b and the FS-iA10b are identical with the exception that the 6 has 6 PWM channels and the 10 has 10. Which I believe I explained earlier in the video. Possibly not. Everything is the same in terms of powering, configuration, and using PPM connection or iBus. If you're using an older flight controller or a plane / helicopter with servos then you would use PWM channels instead.
I can't find 3.2.5 for Nazu can you give it to me here?
The link in the description will take you to the file itself for the Naze32 hex file.
@@TheWayneStevenson how do you connect it to the stm32 software, my pc cant find the board
@@TheWayneStevensonupdated video plz
Why FS i6s is not connecting with FS R6B receiver?
14:00, videos great btw, also ignore the timestamp it's to come back to this point later
I had that transmitter in my first plane, it kept loosing signal after about a two minute time frame and distance, yanked it out of my plane and bought a used spektrum and haven't had a problem.
All electronics systems can have failures. The failure rate with this protocol and radio has proved to be remarkably low - similar to Spektrum. The normal range possible can be seen by Googling up the test video by iforce2d in New Zealand. Bang for buck the simple little Flysky FS-i6x transmitter makes the over-priced Spektrum gear look laughable. For those who require a far more competent radio most folks who aren't already trapped in the financial clutches of E-flite/Spektrum would chose a Multi Protocol OpenTX/EdgeTX/ELRS radio like the Radiomaster TX16SMk2. With the latest firmware they are equivalent in capabilities to the most expensive Spektrum radios - at an order of magnitude lower cost! Plus they can run about 100 different protocols (including all the Spektrum Gear) on the same radio.
Another great video. ? I’ve looked all over for videos of how to flash the flight controller. And I have found none. I just built my first drone and I’m using the speedybee f405 v3 on a 7 inch drone. My receiver is a coolrc flysky fs-x6b and my transmitter is a flysky fs i6x. Please help I don’t know where to find the info that it’s asking for
Ive got a CR8D receiver thats previously binded. I've got the wires setup from the FTDI correctly but not sure what pins are what on the receiver. Its not binding to remote.
here i am in 2024 looking at my very first afroflight zmr250 with the zmr pdb.. and it still boots up. just need to cli it. lol elrs and it will fly!
the STM software I downloaded looks 10000000000% different than yours. You should do a remake with current software.
Is it possible to bind a flysky fsi6 x to a Wltoys receiver? Is the " x" radio the worst of them ?
Snort less Adderall hommie
Been thinking about building one for a few years, might give it a try this summer. Would probably put some straps around it and treat the lumber with linseed oil, maybe even treat the outside with tar.
You should heat the bed and head before leveling.
Hi there. Please how many transmitters can I pair with one receiver? E.g.: FS-iA6B? I have more Flysky transmitters (with tje same protocol) and I would like to be able to use one or another tx to fly with the plane. No such info in manual :( Thx for answer.
What does Errl-0 percent mean? Mine keeps in beeping after binding.
Different betaflight config screen for current betaflight.
Well, my first build and had the same issue, will use the bolt to tighten it, I got a washer along with the pack, unsure how to use it, any idea if I really need it? Btw the washer just wont go in.
Which motors did you get? The washer likely is for the screw on the bottom of the motor that holds the bell on, and shouldn't have anything to do with your prop.
Im sub #999 never forget me
Thanks for the sub! 😀
what improvements would you make now on the build?
I shingled it the second year to make it more efficient. Putting steel banding around it may have done the trick but I would have had to find a fab shop to make them for me. Other than that I still get some steam leaking out the top edges on the front and back. Haven't really investigated if it's coming from between the staves or from the dado channel. I could again increase efficiency by sealing it up with a fascia of sorts or some silicon.
Hi there great video, many of your videos are very informative, 👍🏼 i have bought a FS2A 4CH AFHDS 2A Mini receiver and I’m building a 3 inch drone just to learn in for now. I’ve been told I cannot use this receiver at all for a drone build, can you help me with letting me know if this is true? Can I use this receiver for a drone build? Appreciate any help. Thank you