DIY statue and collectibles display case! Vol.1 Quick and cheap!

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 336

  • @dannydodd4452
    @dannydodd4452 4 роки тому +3

    This was an amazing video...learned more in the past 20 mins than the past 3 months of watching these type of videos

  • @powerglover2021
    @powerglover2021 4 роки тому +2

    Went out and bought the 72×48 in version of this case and its easily going to be able to hold all of my bigger pieces. So happy I stumbled apon your video. This is going to change my life.

  • @Nintendan95
    @Nintendan95 4 роки тому +3

    I'm an absolute DIY noob, I've never built my own stuff before, but I've been recently collecting figures and a few statues over the past year and a half, and am about to (hopefully!) get my own place in a month or 2 so I've really been wanting to get a nice display for my stuff (I've unboxed nothing yet haha)
    I remember looking around for DIY displays because of course customizing your stuff is the best way to get what you want, but all the other things I saw about were a) suuuuper difficult and very long to build and/or b) not exactly what I was looking for.
    But what you've got here is like perfect. I want something pretty big with acrylic windows around 3 or 4 sides so I can get a nice view of my statues and this is like... perfect for me. And it seems just so damn easy to build and put together aswell! This has gotten me pretty excited to try working on something like this sometime next year. Thanks for posting this. It's the first nice custom clean looking display on UA-cam that I really really really like and seems very doable even for a noob like me.

  • @mojopotato1715
    @mojopotato1715 3 роки тому +5

    Much respect to you sir. Great job with your display. I wish I was gifted like you in craftsmanship. I may have to work some overtime and pay for someone to do something like that for my display. Thanks for sharing!

  • @dwest84
    @dwest84 2 роки тому +3

    This is good. I've been vainly trying to come up with a closed cabinet way to display figures and Lego sets, and I CANNOT BELIEVE what display cabinets cost. This still isn't cheap, but it's a lot cheaper.

  • @kevintrapp3675
    @kevintrapp3675 3 роки тому +1

    Appreciate this video. Was sent to me by a buddy and I just ordered everything for 3. Can’t wait to start setting them up. I’ll have lots of empty space in them but not for long.

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому

      Glad it helped dude! They really are the jam for the cost

  • @maroinmybones
    @maroinmybones 3 роки тому +2

    Honestly, I like the Detolf display and lighting, it’s bright and looks amazing side by side.

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +1

      Agreed but can’t hold what I’m currently collecting

  • @GamerThumbTV
    @GamerThumbTV 4 роки тому +3

    Just wanted to say, I've been going crazy looking for a way to display my Pure Arts Assassin's Creed statues that are huge and your video is pure gold! Definitely saved me tons of money. Earned a sub.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому +1

      GamerThumbTV thanks! Please share the video when you can do others can get on board! Good luck with the build

    • @GamerThumbTV
      @GamerThumbTV 4 роки тому

      @@Hiddendimension1 most definitely. Once I get everything together I'm doing a room tour video and I'll make sure to shout out your channel!

  • @justsumbum
    @justsumbum 4 роки тому +3

    Thank you so much for sharing this. I can’t wait to make this, this will work great for my prime 1 berserk statues

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому +1

      That’s currently what I’m using it for too! Good luck!

  • @gooddogcollectibles
    @gooddogcollectibles 3 роки тому +7

    Thank you so much for making this. I’ve got the Sideshow 1/3 Venom on order as my first statue and have been stressing about how to display. This is going to be great. Thank you!!!

  • @BaylessTV
    @BaylessTV 3 роки тому +5

    This is so cool - I’m gonna do something similar without the acrylic (just don’t like glass myself) and turn the bottoms into drawers/cabinets for storage so I can have all of my statues at eye level.
    Thanks for this!

  • @allies9504
    @allies9504 3 роки тому +1

    I used the acrylic glass attached with sticky Velcro after watching this and my display looks so good! Thank you for the great tips! 😁

  • @idiosinkratik
    @idiosinkratik 4 роки тому +14

    Bro you're a godsend something on the market like that would cost five to seven hundred bucks maybe even more

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      idiosinkratik and yet it’s half of that amount. Glad the video helped!

    • @metroidcypher
      @metroidcypher 3 роки тому

      nah more like 1k to 3k

    • @shroomgod1990
      @shroomgod1990 2 роки тому

      A display like this is 1,600 before taxes and shipping

  • @arni7810
    @arni7810 4 роки тому +3

    Hi, I bought the Edsal 72Hx36Wx18inD black shelves from depot. I also bought the same LEDS from Amazon you got. I mostly will go get Acrylic glass at homedepot this weekend plus the tape to cover the holes on metal bars. I cant wait to add my PF wolverine by sideshow in there. It will look sick as yours!!!😁

  • @kevin16scalecollector54
    @kevin16scalecollector54 4 роки тому +1

    Ive ordered the sideshow 1/6 jabba the hutt figure so i need a big space. The freaking thing itself is 32” long. Moducases are out of the question as the cabinet for that figure alone will set me back £400, AND i have to wait 6 months for it. Then theres my bajillion hot toys figures to house too. Probably looking at £2000+ for a set of Moducases. Your video has given me so many ideas. Im pretty confident now i can whip up a sleek new display for under £500 which will house EVERYTHING. Thanks for the video. Thumbs up from me. 👍

  • @willr6793
    @willr6793 3 роки тому +1

    You deserve way more subs. Really appreciate this + your second video!

  • @jcalbores9358
    @jcalbores9358 3 роки тому +2

    BIG THANKS FOR THIS IDEA!!
    Actually I have thought of this before: having a steel rack and acrylic glass sheet. However, I don't have any idea on how to put the glass into the shelf and not to stick it permanently for me to freely add/change/remove the figures inside. Thank you for giving me these ideas. This I think is a cheaper option than the glass cabs! 😁

  • @johnnatanrojaskorea
    @johnnatanrojaskorea 3 роки тому

    Thank you for taking the time to make an extensive video explaining the whole process kindly and thanks to the good Adam Prince for his great contribution, a very humble person who always helps

  • @zeroaspect7036
    @zeroaspect7036 2 роки тому

    great set up brother im gunna try my hand at it in my next build in my 1st bulid i had just a half shelf instead of using curtains tho for the back i used pvs foamboard to give it more of a solid looking back its cheap and can be held on with some double sided tape thanks for the video

  • @Grudge-Goblin
    @Grudge-Goblin 3 роки тому +3

    Dude! Thank you so much for all these great tips on making one of these! I just finished mine and it came out great!

  • @thespartanfox
    @thespartanfox 3 роки тому +1

    Love this and just got to say that those Maul and Savage statues are awesome!

  • @thedarkside0fmars
    @thedarkside0fmars 4 роки тому +7

    Thank you so much!!! I bought these shelves (also inspired by Adam) but I haven't dressed them up yet because I wasn't sure what to do about the edges. Your vinyl idea is brilliant. The display looks amazing.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому +2

      thedarkside0fmars thanks a lot dude! I’m pretty stoked with how it came out. If you need any help or suggestions just holler

  • @newmanxis945
    @newmanxis945 2 роки тому

    Hey man, I just want to thank you for sharing this , I made a couple tweaks but you brought my collection looking beautiful.

  • @Collection_Obsession
    @Collection_Obsession 4 роки тому +5

    Wow, I was looking at Moducases but they are so expensive. This is a great DIY cost effective option and they look GREAT!! Thanks for posting this!

  • @Artsta
    @Artsta 2 роки тому

    Props for this video man! I just made my own case and LOVE it! Linked you up in my video 🙌🏾🙌🏾

  • @SinisterXpr
    @SinisterXpr 4 роки тому +1

    Thanks dude this video was exactly what I've been looking for. Definitely going to try it. Super cool to get the answer I've been looking for from someone also in Louisiana

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      SinisterXpr oh yeah? What part of LA are you in? I don’t know to many other Louisiana based statue collectors

    • @SinisterXpr
      @SinisterXpr 4 роки тому

      @@Hiddendimension1 Lafayette. Yea same dont know of many. So im glad i found your channel.

  • @OpenByChance
    @OpenByChance 4 роки тому +1

    You mentioned some concern about moisture? I am also in the south, my wife and I have a private toy museum at home. I would recommend investing in dehumidifiers, (one per room) to maintain a dry environment. We keep ours running night and day to help protect our collection.

  • @GoGoFiasco
    @GoGoFiasco 3 роки тому +1

    What can I say that hasn’t already been said?? Thank you. As a new collector that buys mostly XM Studios stuff-who can afford another $2K just for the shelving?? And guys in the Collecting group are always talking about buying that expensive Moducase!!! I’d rather use it for new statues!! Bro, if you’re ever in Atlanta, I wanna treat you and your Badass lady to some awesome Southern cuisine and beer!! THANK YOU!!! 😎✌🏾

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +2

      Much appreciated my dude! Glad the shelves helped!

  • @AdamAdam-wp9qk
    @AdamAdam-wp9qk 4 роки тому +2

    Wow awesome job I’m happy for you ! Love the idea of covering the Velcro...shelving is one of the most important things in the collecting hobby and I believe this is one of the best ideas especially for the low cost ! Hopefully more people will do the same thanks for the shout out mannnnn ✌🏼

  • @TheDefinitiveCollector
    @TheDefinitiveCollector 3 роки тому

    Mate, just found your channel and this video is a godsend! Thanks so much for uploading this video, going to help me so much now I'm off to watch Vol 2

  • @MarieCollectibles
    @MarieCollectibles 4 роки тому +2

    Been looking at some new display ideas and this is def on my list of ideas now. Just subbed. Thinking about getting into some statues now. Keep up the great content!

  • @TheWizardjones
    @TheWizardjones 3 роки тому +2

    Hey! Thanks for this video as I have watched it several times when waiting for my muscle rack setup. I didn’t go through with the plexi and the velcro, but I am going to get the lights and hide them the best I can between the shelves.

  • @plasticslacks
    @plasticslacks 4 роки тому +3

    Thanks for this. I have been struggling to figure out a cost-effective way to manage my expanded 1/4 scale statue collection. I'd mostly done 1/6 and 1/12 figures for years, but this is going to be great for displaying the statues and protecting them from a particularly unpredictable feline....

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      Plastic Slacks Toys literally protecting my piece from the same threat. A cat. Lol glad it helped.

  • @newmanxis945
    @newmanxis945 2 роки тому

    Awesome man! Thanks for sharing.

  • @8474Starscream
    @8474Starscream 4 роки тому

    Very clean & classy. Also badass collection

  • @its_ivn7443
    @its_ivn7443 4 роки тому +10

    Dope video but it would of been better if you showed the whole process while you talked over

  • @punctureboy_8525
    @punctureboy_8525 2 роки тому

    Dude this is a rad idea!

  • @RM-hj5lv
    @RM-hj5lv 4 роки тому +2

    Or you could pay 10x for "cases" that hold less weight. Great video and nice to see someone using their brain in the collecting community. Tired of seeing people selling junk cases from half way around the world for thousands of dollars.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому +2

      Couldn’t agree more. You shouldn’t have to be loaded to have nice cases.

  • @robschaeffer2723
    @robschaeffer2723 3 роки тому +1

    Completely “borrowing” this idea for my collection. However I think I may make some minor improvements..... namely... adhesive backed velvet to line the shelves, a solid sheet of painted drywall for the back, and I’m going to frame the plexiglass with painted wood using dado cuts on my table saw, and I’m going to use magnetic strips to attach (a la moducase) . I’ll make sure to tag you in the finished product pics/video. Thanks for the fantastic solution to my problem!!

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому

      Sounds awesome!

    • @andersenzo8066
      @andersenzo8066 3 роки тому

      i realize it's kinda off topic but do anyone know of a good place to stream newly released series online ?

    • @jaycejaime3965
      @jaycejaime3965 3 роки тому

      @Anders Enzo i watch on flixzone. You can find it on google :)

    • @bowenowen5818
      @bowenowen5818 3 роки тому

      @Jayce Jaime yup, have been watching on Flixzone for years myself :)

    • @andersenzo8066
      @andersenzo8066 3 роки тому

      @Jayce Jaime Thank you, signed up and it seems like they got a lot of movies there =) I really appreciate it !

  • @okistash3075
    @okistash3075 3 роки тому

    Thanks I'm going to do exactly what you did but for my consoles.

  • @JOSE2012940
    @JOSE2012940 Рік тому

    Brother I just found your channel and excited over your creativity. I found your site by searching for my daughter Lego Disney castle she made wanted to add to. Smaller version. If you have any shelves (setups)you recommend as it’s 25 inches tall x16 inches. Lastly, I was blown away by the hyperrealistic figures of Batman and Terminator ! Where the heck you buy those????

  • @exoticcarfactsofficialchan7050
    @exoticcarfactsofficialchan7050 4 роки тому +1

    Great video tutorial 😎👍 very informative

  • @TYFGaming
    @TYFGaming 4 роки тому

    Great video! Keep posting stuff like this!!!

  • @black6q
    @black6q 4 роки тому +1

    Wish I would have seen your video months ago because I just paid the first installment of $530 on my second order of a Moducase MAX140 case. Plus I probably have to wait half a year or more for this thing to arrive. Oh well. Nice work on the video.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      black6q man sorry to hear that. But now there’s more options if you expand further

  • @yoshiookami7939
    @yoshiookami7939 4 роки тому

    Nice. Love the video man. Ive been meaning to make a display shelf for my figures. Can’t wait to try this one out

  • @Azim6868
    @Azim6868 3 роки тому +4

    Brilliant idea and very cost effective 👍.
    Just 1 thought, instead of using velcro on the clear sheet, have you try using magnetic strip instead?

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +1

      There are some people that have used magnets. However the Velcro acts like a hinge on a cabinet door when you open one side. With magnets you have to take the entire glass off every time. The hinge method with the Velcro has certainly seem to be the best way so far. Again you can do magnets but it is more difficult to manage when getting into the cases.

  • @lordgrim408
    @lordgrim408 3 роки тому

    That's so awesome! I have been thinking about making a shelf display similar to this!
    I guess our creative tattoo artist minds think alike!
    Phenomenal job!

    • @shroomgod1990
      @shroomgod1990 2 роки тому

      These look almost as good as Moducases for a fraction of the cost. The statue community are extremely knowledgeable when it comes to this. I got many ideas from the communities on Facebook but UA-cam is just as good

  • @geekroomlife5850
    @geekroomlife5850 3 роки тому +1

    Love your videos man

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому

      Thanks for watching!! Stay tuned!

    • @geekroomlife5850
      @geekroomlife5850 3 роки тому +1

      @@Hiddendimension1 def will do, collection while miles ahead of my collection, ours is in the same vein

  • @TheRolex23
    @TheRolex23 3 роки тому

    Wow that vinyl borders sold it to me! Congrats bro! 🔥

  • @AndJusticeForAll23
    @AndJusticeForAll23 3 роки тому +1

    Curios if you take cost out of the equation if you would do another acrylic panel on the back instead of doing the fabric? Have you noticed any dust or anything in the case with using the fabric, or any other disadvantages?

  • @wilfredodiaz8743
    @wilfredodiaz8743 4 роки тому

    Oh my God, thanks for sharing this diy video with us here on UA-cam. I think there's a lot of Action figures collector that can use this video to do the same to display our collection. I think if it's possible I would like to buy the acrylic panels a bit thicker for stability but man think is a cool project to do. Again thanks for sharing

  • @metaldragongaming597
    @metaldragongaming597 3 роки тому

    This is awesome needed something to display my elder scrolls and Zelda dbz collection needed one that would be an entire wall size could always lift stack and add some type of rubber mount or something to have the corners connect as an idea.

  • @mrbaloche
    @mrbaloche 4 роки тому

    Awesome vid, great details and explanation. The outcome is incredible for the price

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      mrbaloche I couldn’t agree more. Definitely the most bang for the buck

  • @StatueMania
    @StatueMania 4 роки тому +1

    Great video! Shelves look great!

  • @medusagorgon6760
    @medusagorgon6760 Рік тому

    Hi can i ask? Is the vinyl you use to cover the acrylic glass in front is same to like electrical vinyl tape? Thanks! Nice display case also

  • @IamBlackMagic03
    @IamBlackMagic03 9 місяців тому

    just stumbled on your video looking for ideas to display my ever growing collection thats still all in boxes. out of curiosity did you think about mounting acrylic with magnets?

  • @retroboyone3577
    @retroboyone3577 4 роки тому

    If these came a bit taller and with 4 shelves instead of 2 I'd grab these in a second. I'm not a statue buyer I'm more of a 6" and hot toys size buyer . I love these though for sure, nice setup and idea !

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      RetrOBoYOnE 357 these came with 5 shelves but for my statues it made them 3 shelf units. If you used all 5 it would be perfect for 1/6 figures

  • @commanderphilbo1471
    @commanderphilbo1471 3 роки тому

    The darth maul statue is prolly the most dope sht I've ever seen in my life .

  • @sixscalemafia
    @sixscalemafia 3 роки тому

    Lighting took me a bit I'm about to do the velcro but I notice we have the exact same case lol so I see around 21:01 you also have this lip on yours, did you just cut a strip in half to make it 1/2 inch approx to put on the top and bottom? Cause that lip is small and when I tried to mock place the strip it totally hangs off that.

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +1

      I would let half the tape hang off the edge of the acrylic and used a razor blade to trim it. Hope that helps

    • @sixscalemafia
      @sixscalemafia 3 роки тому

      @@Hiddendimension1 thank you great idea, the alternative was laying it flat and tryin to cut that would be a pain in the butt. thanks again, it's slowly coming together :)

  • @andrewmeans49
    @andrewmeans49 4 роки тому +1

    I don’t want to do the acrylic just a preference but I love the idea. What exactly can I use to get a black trim look and cover up the holes in the metal?

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      Not sure. Maybe glue magnets to come kind of strips? The acrylic is Important to cover the edges but I think you can think of something. Just have to be creative

    • @andrewmeans49
      @andrewmeans49 4 роки тому

      Wondering I could just use some black tape..

  • @maskedreaper
    @maskedreaper 3 роки тому +1

    How do you deal with power outlets when it comes to having a wide display case blocking power outlets?
    If you still want to use the power outlets you have to some how cut holes in the back and side of the case to thread the power cables through the case.
    I have similar problem I want to get a custom made display cabinet for my statues, but if I go too wide then I will hit a power outlet to which I either have to sacrifice or some how create power cable management with the display case so I can thread cables through it OR go the alternative and go power board on another power outlet and use extension cords if necessary.
    I want a case thats roughly 1350mm wide but that will block probably half the power outlet to which I can live with as I have two power outlets side by side.
    If I go 1300mm wide it wouldn't be wide enough for the planned statues I'm planning on getting.
    If I go 1400mm wide it will most certainly block the first power outlet and leave the second power outlet right on the edge of the cabinet.
    So yeah its a tricky situation when you want a nice wide cabinet but power outlets become a problem and restrict the width of the cabinet size you want.

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому

      So there’s no backs to these cases. Just fabric. So I can remove the Velcro’d glass from the front and get right to My outlet by scooting the fabric over. I also use surge protectors in all outlets so I can get to and move plugs as I need. It’s really easy actually.

    • @maskedreaper
      @maskedreaper 3 роки тому +1

      @@Hiddendimension1 Ah okay no backs to your cases. Hmm...yeah whether anybody has the skills to DIY or get someone to custom make a case for you...either way you still have to deal with outlets and power cables.
      For me it still in the planning stages of getting display case so I don't know what I'm going to do.
      First of all I'm going to try and contact a place that makes custom display cabinets and ask them about cable management and dealing with outlets and see what they say about it.
      @BogleArts thanks for the replay as I'm doing my research on what's the best method for myself and also shop around and see what I can find.

  • @heathercondon7245
    @heathercondon7245 4 роки тому

    Thank you SO SO much for doing this video!!! I've been researching how to display my 1/4 statues and this is something I am going to definitely consider, it's beautiful!

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      Heather Condon thanks! Definitely the best bang for the buck. Let me know if you have any questions!

  • @409gmoney
    @409gmoney 2 роки тому

    This is sooooo effing awesome! Gonna be making these with a relative. Sick of the detolfs.

  • @squidracerX
    @squidracerX 3 роки тому

    2 questions -- if you didn't want to do the fabric, do you think painting shelves would work okay? Heck mine could stay wood color and it wouldnt that big a deal to me. But black makes it look more "museum" as you say. -- But my main question as I watch this and see how man parts there are to each one -- *would this be a pain to move?* If you live in an apartment and might move every 2 years or so -- would those be a pain to keep reassembling? As you show the fabric is not part of the shelves, etc...

  • @stanleykubik1778
    @stanleykubik1778 2 роки тому

    hey, mate, im doing an acrylic panel for a case i have, gona go with velcro, would polycarbonate work ? the panel needs to be 36inch by19, do you think 3/16 inch thick is thick enough ? . and if polycarbonate not good, would you tell me what type and thickness do you recommend for my project. Thanks

    • @Hiddendimension1
      @Hiddendimension1  2 роки тому +1

      So I don’t know what polycarbonate is but my glass is 1/8” thick and it’s perfect.

  • @dcdude81
    @dcdude81 4 роки тому

    Dam, that’s one if the nicest displays I’ve seen

  • @GoneHollowMedia
    @GoneHollowMedia 4 роки тому

    Nice video dude. Given me some ideas for my set up. Might have to put in some step platforms for smaller figures and collectables 🤔

  • @arni7810
    @arni7810 4 роки тому +1

    I just the link..but there out of stock..dang. I can always get the 72in high..but it's more expensive. Very helpful video. I'll save to follow and how I can do this as well.

  • @djchaos2685
    @djchaos2685 4 роки тому +1

    Thank you bro, I have the same shelving units and been trying to make them look better and came across your video on a Facebook page. Definitely know the humidity problems I'm in the New Orleans area too but anyway awesome collection you got, keep up the great work and videos

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      djchaos2685 hell yeah man always glad to hear from a local.

  • @chrismurphy3745
    @chrismurphy3745 4 роки тому

    Fantastic. Great information thank you

  • @simonriddick
    @simonriddick 4 роки тому +1

    That's really a decent idea. I saw these at the Depot but the boxes all had pretty bad damage so I quit it. That was a while back i'll go check again. I have a lot of Prime 1 pieces so depth is important. I have Doomsday as well which is probably the biggest. I think Hush Supes base might not even fit :P. I dunno i'll figure it out this looks really good though.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому +1

      simonriddick these don’t have solid backs so the base can hang a few inches off the back and still fit. The black background just caters to the base shape. As long as the shelf is pulled away from the wall some. Good luck

    • @simonriddick
      @simonriddick 4 роки тому

      @@Hiddendimension1 Ok thank you. Some of the big boys might get their own special area. Going to face off Hush Supes and DD on their own I think. Cool :).

  • @SentriTMC
    @SentriTMC 3 роки тому +1

    Amazing! Going to watch the updated video as well. +1 sub!

  • @arni7810
    @arni7810 4 роки тому

    I believe if you add a some more of thoses led lights you have on front towards the back it will illuminate the shelves more. Maybe 3 more in the back on both shelves, other than that it looks fantastic!!!

  • @VirtuousContract
    @VirtuousContract 9 місяців тому

    Wonder what’s best using the magnet tape or the Velcro for the acrylic

  • @Cruisnik00
    @Cruisnik00 4 роки тому +1

    Awesome set up. Definitely going to go with this. Especially since I collect 1/4 scale statues along with hot toys and my deltofs aren’t enough anymore. Been looking for a new set up.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      Marcos Solorio I did all this bc I was in the exact same situation. So glad I could help. Share and tell your ppl!

  • @smallmouth.studio
    @smallmouth.studio 2 роки тому

    This is sick!

  • @jimmyshoegaz3r
    @jimmyshoegaz3r 4 роки тому +1

    The shelving unit i am looking at is 72H X 48W X 24D . Do you have any suggestions on what fabric to use ? My concern is that if i use two of the ones you posted it wouldn't look as clean with a divider line . Any advice would be appreciated .

  • @seanehook
    @seanehook 3 роки тому +1

    Nice build. Can I ask a favor? Can you measure from the bottom of the shelf to the top so I can order acrylic? I'm going the route of ordering custom acrylic and shelves won't be in for another week or so. Is your shelf on the bottom option? Can it go lower?

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +1

      You can technically not use wood on the bottoms shelf and just set the statues on the floor with the black fabric giving the illusion there’s a shelf but you actually get a few more inches. The dimensions of the shelves are in the beginning of the video. As long as the acrylic is cut to the same size as the shelf you ordered, where the shelves are placed is irrelevant.

    • @seanehook
      @seanehook 3 роки тому

      @@Hiddendimension1 Thanks. I'm tracking. I know the height of the overall unit but I need to get acrylic the exact size, So for example, the overall unit is 60" but it appears the first shelf starts about an inch or two up so I would need to order acylic at 58/59".

  • @juliankrishnan3849
    @juliankrishnan3849 2 роки тому

    Hey mate looks like the extension cables are sold out. Any idea where else I could get them from?

  • @leoanddiana
    @leoanddiana 9 місяців тому

    Can you please tell me where I can the display case with LED’s . The name of it , or link to a website would be great

  • @arni7810
    @arni7810 4 роки тому +1

    Yo, sorry for all the questions. I received the LEDs you posted link at Amazon today and I tested them to see if they all work. I did noticed a small yellow ball type reflecting off the mini LED to surface..do yours have that issue, I mean it isnt that bad, but just checking if all are like that.

  • @Manchild_Figz
    @Manchild_Figz 3 роки тому

    Would you be able to install risers ? As well as adjust the middle shelf. I think this would be perfect for 1/6 scale figures and I was looking for something to showcase quite a few figures at once. Also one more thing as far as the lighting goes would you recommend these same style lights for what I’m going for ? Or would you say maybe the led strips in the cool white colorwith the V style paneling ?

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому

      Risers would be a great idea. And you can use all of the shelves for a smaller figures I just took some out because mine are larger

  • @shroomgod1990
    @shroomgod1990 2 роки тому

    This looks amazing. Ima have to watch this video like 3x. It looks like a Moducase. Now the shelving unit I have is in grey. Should I spray paint black cause I do want it all blacked out with no white or can I also cover the inside with Vinyl tape making it all black? Thanks for any advice. Thanks for the great in detail video.

    • @Hiddendimension1
      @Hiddendimension1  2 роки тому

      I would paint them black

    • @shroomgod1990
      @shroomgod1990 2 роки тому

      @@Hiddendimension1 thanks man I am going to do that with a gloss black. What did you use for the backboard? Where did you get that? I’m having a hard time finding a thick black poster board that’s at least 36” wide

    • @shroomgod1990
      @shroomgod1990 2 роки тому

      @@Hiddendimension1 I just purchased the 2 sheets of acrylic from your link. Appreciate all the work. I can’t wait to get everything and make this cause the end product is amazing. Basically a moducase.

  • @DereksHorrorStuff
    @DereksHorrorStuff 4 роки тому +1

    awesome! thanks for showing us!

  • @actionjackson834
    @actionjackson834 4 роки тому +2

    Thanks for this DIY video! I have the industrial shelves and was thinking of how to get the acrylic glass to mount. Where did you get the vinyl wrap at? I didn't see a link to them posted. I was also thinking of a way to get magnets to stick the acrylic glass, and glue the opposite magnet to the metal shelves so they could just mount on and off easily then cover it up with vinyl.

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому +2

      ActionJackson83 the website is Uscutter.com there’s a screen shot of the website in the video. Sorry thought i added the link.

  • @JayWood2010
    @JayWood2010 3 роки тому

    Could you post a link to Adam's post? You said his was a different size. Im curious to see what his looks like.

  • @shaunbradbrook2311
    @shaunbradbrook2311 3 роки тому

    Hey mate love this build doing 3 myself and a bit different one later thanks for the video just wanted to know what the thickness of the acrylic sheet cheers from downunder

  • @arni7810
    @arni7810 4 роки тому

    Great video..I was actually looking to get this garage shelves also..lol

  • @brysonw1815
    @brysonw1815 2 роки тому

    Where did you get the standing ones and lights ?? Need one for my knife collection

  • @TheIntellectualGamer
    @TheIntellectualGamer 3 роки тому

    I’m in Louisiana too aka New Orleans I just bought the Gladiator shelves 5 tier 36 in W, 72 in H, 18 in D. This is my first time ever buying these shelves I believe they’re adjustable and I won’t need all five of the shelves because I have 1/4 scale statues coming well I’ll be good?

  • @sixscalemafia
    @sixscalemafia 3 роки тому

    Nice video. I’m about to do this but does it matter what Velcro side you put on the case vs the acrylic? Like hard Velcro on case soft Velcro on acrylic? Or does it not matter?

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +1

      It doesn’t matter but I’m glad I put the soft part on the acrylic on mine so when I pull the acrylic off it’s softer on my hands and the edges being a Soft is good if you need to lean it or lay the sheet down for any reason.

    • @sixscalemafia
      @sixscalemafia 3 роки тому

      @@Hiddendimension1 perfect! Thank you so much for the quick replay as I said I’m doing it RIGHT NOW and wanted to be sure before I committed lol. Thanks again I love it!

  • @anbusquad7421
    @anbusquad7421 3 роки тому

    I just assemble mine 😅 but were I joined the upper and bottom part cover the holes leaving one shelf with like 30 inches and the other with 22 inches? Like I thought i was gonna be right at the middle but one ins bigger than the other 😅 did this happen to you ? ?? Idk if you understand what im trying to say 😂

  • @gregrome6842
    @gregrome6842 4 роки тому

    This is awesome. I only have a few statues and I would get Moducase but it would look weird if my statues are all low on the ground. I think I’m going to try this display for my 1/4 scale Marvel statues

    • @Hiddendimension1
      @Hiddendimension1  4 роки тому

      Greg Rome it’s a particularly good solution for 1/4 scale

  • @Skjuan06
    @Skjuan06 3 роки тому +1

    Great video! I already order everything except for the black vinyl strip, i dont see the link to that. Can you share me the link please?

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому

      www.homedepot.com/p/Commercial-Electric-1-1-2-in-x-108-ft-Heavy-Duty-Tape-Black-30005338/206874170

  • @karlkirven607
    @karlkirven607 3 роки тому

    BEAUTIFUL! So dope Sir! Question, what’s the clearance on each shelf? (Meaning with that exact set-up, what’s the tallest piece I can put on each of those shelf’s).

  • @kymd2738
    @kymd2738 2 роки тому

    Awesome

  • @crytaldawn2014
    @crytaldawn2014 2 роки тому

    The link of curtains you have in the description is for curtains 30in not 36 making them to short for the stand. Do you have a link to the 36x84 curtains ?

    • @Hiddendimension1
      @Hiddendimension1  2 роки тому +1

      I guess they changed the link. You can Google the size you need

  • @Crimprod
    @Crimprod 3 роки тому

    Thanks a lot for the video. I made one also!

  • @anbusquad7421
    @anbusquad7421 3 роки тому +1

    Im doing this okay the velcro got glue already and can you open and close the doors anytime you want to???

    • @Hiddendimension1
      @Hiddendimension1  3 роки тому +1

      Yes the Velcro acts like a hinge when you open it from one side

    • @anbusquad7421
      @anbusquad7421 3 роки тому

      @@Hiddendimension1 okay thank you man ima do this can wait for it and see how it look and thank you for listing everything I watched the video 3 times and it blow my mind every time it just looks to good

  • @willwes985
    @willwes985 3 роки тому +1

    I’m from Louisiana to if you ever get into making and selling these I’d definitely be a buyer recently I’ve been buying a lot of old horror figures