Whitestone Galaxy S23 Ultra Cases & Dome Glass Screen Protectors - Install & Review
Вставка
- Опубліковано 13 чер 2024
- Buy on Amazon
Whitestone Dome UV Gen film - amzn.to/3IF0I2g
Whitestone Dome Glass w/ liquid adhesive - amzn.to/3XG0w7e
Whitestone Beads Case, Liquid Silicone Gel Case S23 Ultra - amzn.to/3ZcjlQp
Diamond Case for Galaxy S23 Ultra - amzn.to/3m3azpB
Buy from Whitestone website
whitestonedome.rfrl.co/qjpy2
Thanks for watching!
Follow me on
Instagram - / hightechcheck
Twitter - / hightechcheck2
Facebook - / highttechcheck
Subscribe - / hightechcheck
@WhitestoneDome @SamsungUS @Samsung #galaxys23ultra #galaxys23series #galaxys23 #galaxys23plus #samsunggalaxys23ultra #samsunggalaxys23 #bestandworst #whitestones - Наука та технологія
Thanks for the tutorial! I was nervous about installing the glass myself, but I just conquered it now thanks to you 😊
those lines in the middle of the first screen protector are usually caused by squeezing before the adhesive is down on the screen. there's absolutely no reason to squeegee the screen protector down until after you do the bend back movement and you know push the one side down then do the other side take it off the post squeeze it the other side down. If you squeegee the screen protector before doing that you will get a line every time. I hope this helps! Take care, -E
Thanks for the tip Eric, I’ll try that.
Thanks! Great review as always ! My go to channel for real usage
Thank you so much for your support! I'm sorry for the late reply I missed this in the jumble of comments. I wouldn't have a channel if it wasn't for viewers like you :)
Great content. Will the glass screen protector work with supcase unicorn beetle pro, or poetic spartan or revaluation cases or otterbox defender pro. 🤔 it's Jun 7th and I got the Whitestone dome film screen protector for my s23 ultra. It went on beautifully. So right now it sits in the poetic spartan orange case. The only thing I noticed is that if so press the sides to hard like putting it on the car phone holder that hold the phone from the sides the side did lift a little, so I lifted the side if my case and pushed it back down. Since then no problem. Like You said the film feels like glass. Best screen protector I've used. And I've used a lot of different ones. Just wished they made the top and sides a smaller so when you use a case like poetic or otterbox defender or supcase unicorn beetle pro or I-Blason Armorbox wouldn't be so worried about lifting.
Would you recommend a Supcase UB Pro + Film protector to maximize protection against drops? I don't know if there is any compatible tempered glass... Or maybe go with a Spigen Rugged Armor and tempered glass.. What do you think?
Thanks a lot for your great review. Very helpful indeed
Absolutely massive respect to you sir I massively nervous like everyone else but it was easy to install got rid of the line in the middle by doing UV light for 2 minute's best tutorial on UA-cam
I haven't watched the video yet but are there any cases you can recommend? That will work with a glass screen protector and not lift it up?
Another great review and application of the Whitestone products thanks very much 😎🇮🇪👏
Thanks for watching!
Great Video! If you had to choose Whitestone or Milomdoi for screen protector?? Thks
Does the dome glass fit perfectly with AUG Plasma series case?
does it have any issues? i also don't get why they don't just put the bridge at the middle, instead of tilting the device to get the glue to the middle, makes no sense
Does anyone know if the Ultra Hard Coated White Stone Dome UV Gen Film will work with the Castify Impact Cases?
Being that this screen protector blocks blue light, does it change the color of the screen? As in removing blue tints and making everything more orange?
I'm glad that the prices have finally come down 😊. It used to be Close to 60 dollars.
Funny, I just watched your review of another similar glue-based protector thing... I had Whitestone for my S21 Ultra, but for some reason I couldn't find it for S23 Ultra? Went with the IMBZBK... everything went fine, but I think this kit is probably a little nicer.
Thank you this video.
How does the uv gen feel at the edges? Sharp or smooth? Eg swipes inwards for back gestures..thx :)
Edges are smothe.. Smother than the amfilm that was on my s21 ultra but the spen isn't working 😩
They are smooth
As always, great review. Love that you show very details of our product. Thank you🙌
You are so welcome!
i just finished the installation but i left the square white rubber piece for more than 30 seconds i believe 1 minutes, and it left a a very light white mark, is it going to disappear ?
I wanted to order from your link on Amazon. This order can’t be shipped to the address you entered. 🥺
Is the dome glass case friendly with the otterbox defender pro?
Dome glass is not close for front camera. Screen Protector have a dent to camera
The adhesive glue glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ?
Would appreciate the help 🙏🏼
Use alcohol and wipe apparently all glues hate alcohol or acetone basically nail polish remover
@@jonathanoxlade4252 won't it also effect the inside of the pen slot ?
The uv gen film only for the s23 ultra is the best film ever made. It feels like glass when on. No liquid adhesive and easiest install ever. The lime in the middle goes away after 24 to 48 hours so don't fret it to much. I say stay away from liquid adhesive at all costs. It can ruin phones and even seep to the edge and end up breaking your phone when trying to get it off. This takes away all the pain imo and it's just so damn nice to the touch. It's actually somehow even smoother then glass when on. Idk how they did it but I've never liked films this one is insane I'll never use anything else tbh again. I hope they keep up with this with the next lines of ultra since they only do it for the ultra it seems.
I feel the same way also I am to incompetent to try installing the glass my self. Glad I found this video and discovered Whitestone has an adhesive option!
Can you plz tell me that how the line goes off and what are the precautions i can take to install it perfectly just like you?
My spen isn't working properly after installation even turning sensitivity on. Fingerprint sensor is fine through. May try to reinstall and apply more pressure before after curing 😔
That’s very odd, I haven’t had that happen with mine on any screen protector before 🤔 typical you’ll have issues with the fingerprint sensor
I recently installed the Dome Glass on my S23U, but my fingerprint scanner doesn't work as well as yours did... Can't even get my fingerprints to be registered. So very disappointed with it!
My screen was super scratched, i just put this protector on it and it looks like knew, i read some reviews on other glued glass protectors saying it damages the screen, hope is not the case.
does the quality of the front camera decrease because it is closed?
So which Whitestone Dome is better the film or the glass
If you want the best scratch and drop protection go with glass, if you just want to protect your phones screen from scratch’s go with the film.
@@HighTechCheck I have had no good luck with glass ones for some reason.
I'd get the film. I'm on my second case of glass dome protectors in less than a month.
Reason for that is the glass dome protectors are to thick or the edge protection on cases is to low. Every drop is a solid chance for a cracked protector.
Cases I've tested. Samsung, spigen and otterbox. If you watch this video you can see how bad the edge protection is on the case he is using and it is the whitestone brand.
To prove my point if anyone has a dome protector rest your phone on the edge of a table and look at the spacing between the phone and the table. The glass hits first. Yes it has top and bottom but if your phone falls and hits on the edge your going to be ordering more.
Will the diamond case fit s22 ultra???
Maybe
How can I remove a single small droplet of glue from the ear speaker? No functionality affected, sound is perfect still, but it just looks bad when viewing in different lighting... its not deep either
You can try an alcohol wipe , that would be your safest bet.
@@HighTechCheck It was easier than I thought, what I did was I took an alcohol wipe, a post it note and really gently wiped in between the bezel with both at the same time. The glue is not like regular glue, it's a soft glue and it came out sort of like silicone. Anyway problem solved, cheers!!
So the film is as smooth as the glass screen protector?
Even more smooth
thanks for the tutorial, i just finished the installation but i left the square white rubber piece for more than 30 seconds i believe 1 minutes, and it left a a very light white mark, is it going to disappear ? @hightechcheck
wish they had privacy version too
I'm not gonna deny that their screen protector is good ( if you know what you're doing ), however their customer service is non existent, very slow to response, and when they responded they make sure they do not solve problems, instead they will ask stupid questions which will gonna waste your time & you then have to wait forever for them to reply again.
I haven't had luck with the glass protector. The edge protection is so low on 99% of cases. It is almost a guaranteed cracked phone on every drop. The glass protection is thicker than the edges of the case.
I tried samsung case, spigen and otterbox. I love the s23u but case companies don't know how to make a good case that works for it. I'm not asking for much just make the edge slightly higher than the screen protector so when it falls it lands on the case not the glass.
My top screen do have some bubbles on it.. 😢
That's unfortunate. The ones for the s23 ultra are impossible to remove without breaking them, so you'll have to buy another one. This is the best install video, but he's done it before and is a bit loose with the level requirements. Just get a small cutting board and level it with business cards and do the install on that. Also let all the fluid out. Takes 30 seconds. There is more than enough fluid in the tube to get a bubble free install.
Still line in the center. How can you make it disappear?
They state it should disappear within a few days.
@HighTechCheck more than a week and line is still there. Annoying...And they deleted my comment on the official website
@LED Clothing Studio Inc. hi, just ordered the Ugen film, I want to ask you if the line in the center is disappeared yet ?
@LED Clothing Studio Inc. hi, just ordered the Ugen film, I want to ask you if the line in the center is disappeared yet ?
@@mohammadchehab2039 4 days, line is still there. Waiting..
19:19 It would be better if they gave me the glass =(
I've tried many different screen protectors. Film, glass, liquid glass. This one is 100% the best.
def not
@@Keif_Stoned what do you recommend?