I wish Samsung would ditch even the subtle curve on screens. But at least we now have screen protectors that work. I remember the hell i had with my Note 8
PSA for anyone with tight fitting cases. As some have mentioned, this screen protector might be a hit or miss with certain phone cases. Unfortunately, it didn't work out for me with my Mous (brand) phone case as the case is very tight fitting and would wrap around near the edge of the screen. For this particular reason, I kept experiencing issues with micro-bubbles, corner lifting, and edge lifting due to the tight fitting case pushing up the glass. This became an huge annoyance and made it difficult to type or detect buttons along the lifted edge. I've been using it for a few weeks (since release of S23 Ultra) and the edge lifting seems to have gotten worst as the adhesive has lost it's tackiness. Fingerprint sensor was a bit problematic for me as well even with the touch sensitivity setting turned ON. Don't get me wrong, the tempered glass is definitely amazing (feeling) but wish it would had worked out for my situation. Definitely hoping for some better solutions (if any). Side note: For installation, follow the exact steps mentioned in the video for installation! If you don't apply pressure down the middle first, then you'll end up trapping air pockets in middle of the screen.Do it correctly the first time and it might save you some headaches! haha 😂
Could just use the cases in this video? I’ve got an official Samsung leather case, caudabe sheath and a dbrand grip on order and will get the official Samsung case in this video and this screen protector and do some testing
the "solution" is samsung needs to stop with these absolutely USELESS curved screens. i have the phantom black 512GB s23 ultra but haven't used it since i got the FINALLY flat screen bay pixel pro 8.
PSA for people with the official galaxy s23 ultra leather case, no issues on my end with the protector lifting or causing corner bubbles. No issues here and it's a good fit.
Bit of a PSA for you all: if you have a case that grips tightly around your phone edges, like the Spigen Tough Armor as I do, then it will lift this Milomdoi scree protector up. I tried applying it twice and screwed up with not applying force causing bubbles, but I noticed that the edges were being lifted up.
Dang, thanks for the info! I'm getting the Spigen Ultra Hybrid S clear case. So, I guess I'll have to look for another screen protector. I'm curious to know about the screen protector covering the selfie camera with no cut out. Do you see a drop in quality when taking pictures or video?
@@micahjohnson9184 I had the Mowei UV protector on the S22 Ultra, also no cutout, and I have to say I didn't see any difference, no weird glaring or haze or anything. I'm sure this is fine as well :)
This could all have been avoided if Samsung hadn't made this screen curved... the curve is so minimal right now that I'm even thinking what's the point, just make it flat already.
@@micahjohnson9184 I didn't get to test it with my camera, as I was putting it on before I ever set my phone and got access to the camera. I feel like it would slightly drop in picture, but I'm not entirely sure.
The black borders also cut off the visible part of the screen reducing the screen size of what you see. So it is going to hide some of that screen. Personally its got too many cons to be worth it to me.
Not compatible with the Supcase Unicorn Beetle for anyone with this case. Top frame kept lifting the glass creating air bubbles. Great installation video though. I used this instead of the instructions it came with.
I was quite hyped about this screen protector and jumped few hoops to get one. Then once it was installed, I'm not impressed that much. The black bezels cover part of the screen sides. Fingerprint does work but you need to press quite hard. Overall touch feel on the screen is also altered because the protector slightly thickens from the middle to the sides which reduces sensitivity a bit in the thicker parts. Not to mention the sharp edge of the screen protector is well above the actuall phone which creates a gap - it'll catch all the gunk from your fingers, dust, etc. I'm curious for how long I'll have the nerves to use this and then modestly return to a cheaper hydrofilm based protector.
Great, one day after the installation and quite obvious flaw emerged. The glass edges which are on both sides freely in the air are fragile as hell. I don't know I bumped my phone with but I just found out that the protector is chipped (the whole day was in my hand or on a table...).
This screen protector is probably the best full adhesive screen protector that you can get for the S23 Ultra that does not require mathematical engineering degree to put the liquid adhesive screen protectors on. Yes it does cut part of the visible screen due to the black borders around the screen protector but it's minimal. A lot of cases that wrap around the screen itself will lift the screen protector especially in the corners I will recommend rhinoshield case it goes up right to the screen protector without touching it only bad part it's a little expensive for a case.
I was pretty excited after installing this - took a little extra time to pry the corners and get the bubbles out, and when I was done it seemed nearly perfect. Then, alas, I could not get the phone into my Spigen case without the corners of the screen protector peeling up. I tried over and over, stretching and prying the case, but finally admitted defeat while watching the bubbles' inexorable spread across my screen. I removed the Milomdoi; corner protection far outweighs screen protection for the moment, I figure...
Did you find a screen protector that worked with your Spigen case? I had the same thing happen to minee with the Spigen tough armour so now looking for a new screen protector
@@Flemo2140 I didn't. I ended up using an OtterBox Commuter case with a Whitestone Dome screen protector. I hope you find a good solution for your phone.
Same here. I ended up ripping it off and returning it. The fingerprint scanner worked, but only 25% of the time. The times it did work, it was definitely a lot slower, and I had to press down pretty hard. I don't recommend it. I bought the one from Whitestone and I'll see if it's any better. It's pretty expensive tho.
Simtect Camera Protector Case and Carveit Wood Walnut Case works. the carveit was way more premium then i thought it would be. Ringke and Spigen cases did not
With it's 0,16mm thickness allows the fingerprint sensor work pretty well and giving a very decent protection against scratches, I love that one over the thicker ones.
I've bought atleast 10 packs of this type of protectors (so 20 total), they break very easily. And as others said, certain cases cause the sides to lift. Definitely not worth it in my opinion.
😂I tried to remove that last bubble in the corner by just barely lifting the glass with the tool - crack. The second cover fit better. Thought I had it made. This time a couple of small bubbles formed but no problem. A half hour later I set my Ultra on the wireless charger and elongated bubbles formed the full length of the phone on both sides at the curve. Several larger bubbles formed at the top and bottom. I tried to squeege the bubbles to the corners on both sides and the glass cracked in two places. Nasty mess to get off. Back to the film.
Installation was very easy, i had no bubbles on the first try. I did it like you. 4 corners press first, then the full middle section and in the last the sides nice and slow. worked perfect.
@@vinnieducy947 After more testing i can say very many cases fits for the tempered glass protector. Only not fitting was from spigen, caseology and Ringke...
The best screen protector that I ever found was one that Samsung pre-installed on all S20 Ultra from the factory. Never had bubbles on it and still going strong to this day. I upgraded since to the S23 Ultra and the film seems to be the best.
That slight bit of resistance you say it's too much for me there's too many good ones out there a little thicker but are really good glass and have zero
Just installed it, it fits perfectly my case, when i say perfectly i mean 1 more millimeter top or bottom and i would have to return it. Fingerprint accuracy doesn't seems to be the best tho, and it's definitely slower....but it works
It is a tight fit but like you said, it fits. It’s been impossible to find a good tempered glass protector that’s doesn’t use liquid adhesive that’s worth it. I was so excited when I saw this lol
Can you tell me about the black border.. is that black border blocking the screen.. i cant go for uv tempered because will spread into spen or front speaker.. so i want full glue tempered with fingerpint support also.. i only find this model.. i tried lito 3d.. but fingerprint is not working correctly.. also its black boder blocking screen little.. so pls tell me is this blocking the curved screen or top
Well...mine lasted about 4 days and now it is cracked. Have no idea how it cracked i have been really careful. The installation was great , but unfortunately it does not last long. 😢
thank you. i just switched back from an iphone to this and was having a hard time finding a screen glass with full adhesive since it's so common for iphone protectors.
What about the black frames of the glass protector? I heared interfear with some of the display, since you have a black background in your cellphone you may not noticed, I would love to see another review checking this and also using the front camera since the glass covers it
I also have this protector and it went on flawless! The fingerprint sensor and spen work great as well. The black edges do seem to slightly interfere with the curved part of the display blocking some of the waterfall bezel. it doesn't bother me much but this would be hands down best protector if it was completely clear. seems stronger then other UV brands with not mess. front camera seems perfect to me to interference. i did not use the back camera protectors due to how it just sat across all the lenses
Thank you! Just had to make a claim on BRAND NEW S23Ultra Lavender phone😭 Verizon rep sold me cover and screen protector and said I'd never have to worry buying another one...fast forward...Crack in curve which I am hearing now the curve is an issue. Ugh I've had every note and can't get away from them, cause I love my pen. I'll be ordering this cover 2nght🥰
Could you make a video of what cases are compatible with this screen protector? i bought the ringke fusion x as you recomended on other video and it lift the edges when is on my pocket.
My experience with Milomdoi has been somewhat disappointing. Followed the instructions after watching the video several times. Removing a few side bubbles from the first installation was a little challenging and I ended up cracking the glass. Ok, no worries, I have a backup. Installed the second, fewer bubbles got them out, and it looked like a clean install. The next day, air bubbles ran down both sides. I'm still seeing them pop up down the sides. So my vote is a BIG NO on Milomdoi.
It's definitely a hit or miss, cuz I used this product and it has worked great and yet when decided to put a new protector on it looks like shit lol air pockets littered throughout. But again it has worked in the past so...50/50 maybe?
I've had something similar for the Oneplus 7 Pro, full adhesive, and you had to lift up the corners one by one to squeegee out the bubbles, but once it was done it was fully adhered, also on the curved edges yes. Hope this version is somewhat case friendly... I believe the black edges are there so you can lift it up without seeing it (could be a little bubble/dust particle under there if you lift it)
Hi there, question if i could - What do you consider the *Toughest* protector and case combo? Ive had my S23U less than a month, and despite a case and a glue on protector it now has two seperate nasty cracks in it from drops onto gravel. I used to run Otter Defender cases, but what they offer for the S23U isnt anywhere close to what it used to be. Any thoughts? Thanx!
Hello everyone. I just received this screenrotecror - my third in a row now. It is true that this one has not the irritating fingerprint circle, but the screen resolution is shit! Looks almost like dusty and similar to bad resolution screens. I do not know what to do with all these shitty screen protectors, I am so tired. Does anyone know where I could buy a fucking normal screen protector which is 100% clear and without this idiotic circle?
Thanks for the great installations and reviews. I did try this one and fingerprint was hit or miss. no bubbles but the fingerprint was annoying so I pealed off ever so gently from the corners and it quickly cracked in the center and was an absolute mess getting off. Little pieces where left on my screen and thankfully I escaped with no damage. Went back and will probably stay with AM film.
I’m sorry to hear you had a bad experience, I typically have issues with the sensor when my hands are dry. It helps if I use a bit of lotion and that seems to help.
Agree 100%. Had to fight to even register any fingerprints with this one on - even with the sensitivity switched on, and getting it off was the worst! Shattered like safety glass into thousands of shards. No bubbles in the center but a battle to rid them from the curved edges. Gave up and went back to a Torras film protector that's as good a film protector as I've ever used, film is just not the same as glass.
Just installed it yesterday and I had the same issues. Finger print scanner doesn't work well, may be worked 25% of the time. Also cracked when i tried to remove it. Perhaps they can refine this screen and it'll be a hit product.
I use an Encased thin armour case and it doesn't work. The bubbles keep coming back along corners and edges even after I press them out. Also I used my thumb to push a bubble out up near the camera, and when my thumbnail went over the lip the force of just my nail going over the edge fractured the protector from the camera notch down. (I'll take the blame for this) Amazon user reviews are only 2 stars out of 1800 reviews so not impressive in the least. (Canada) It is the ONLY non liquid glass protector with full screen adhesive though. I'm hoping other companies make alternative options soon.
Good screen protector I had a couple bubbles didn't do the installation the same way unfortunately came across your video afterwords but , One thing to mention it does slow down the overall screen response, I have the screen protector setting turned on just noticing phone doesn't feel the same as before Big mention
You mentioned the adhesive protection.. Those the plastic tpu? I am a clutz with this temper glass break with one fall?....also you can buy individual glass cam glass i thought that was what you were putting on it has a template like that they fit around the cam and stay on to protect your lenses....getting my galaxy in the mail today excited don't know what case to get I have a note note 9 with that plastic screen protector tpu....and 4 years ago I bought the clayco exeon by sup...tpu back bumper that comes with a screen protector built i just through the one extra and have loved it. One bubble wbe screens off but can't see if with the display on. Cut outs are much bigger that the more note 9 for the 23 ultra, so I am looking g for tempered glass for the lenses...poetic guardian seems like my only choice or punk case come with and extra frame without protector if you choose your own..I just wanna know if anyone can tell me if I drop my phone in the the way I have before with my current bouncy case clayco...saved me every time, same kinda for the new one...will the tempered glass break...will I be going threw sheets of tempered glass, or tpu? Open to suggestions around the board... toughest bumper plus SP I stalled....has to be able to survive a 5 foot fall if it falls out while I am doing pull ups that would be the worst it would get next to short falls out side which rarely happens...gym is my concern falling off tables...appreciate any suggestions.
After holding this in a pocket for awhile I observed it is moving. I can even move it back to left, right, down, up. It's strange, force pushing this will move this successufly. It catches scratches also, little bit disipointed. I also don't understand why version which I have front camera open space which I don't see on your video.
Yeah I bought this one first black border isn't that annoying to deal with but the front lense of the camera is covered in the adhesive and blurs the photos a tiny bit and the edges get slightly lifted by the phone case definitely no my favorite
Just ordered mine today 🤗 The am film wasted my time and money,The liquid screen protectors are a headache for the s23ultra hopefully I'm satisfied with this one thanks for the video and installation 👍
Are you going to have some Screen Protectors to test with the S24U soon? I hope we have many more options of screen protectors for the S24U and it's "nearly" flat display!
I put the protector in the bottom first then lowered it down. I pressed on the four corners and part of the protector was hanging on the guide. it cracked. The second one worked better, but there are still bubbles that I can't get out. I tried lifting the top left corner just a little and I think the corner cracked a little. Now it seems like bubbles keep forming in that same corner and won't go away. Oh well. I will live with it now.
What case are you using with it? I tried with a spigen rugged armor and it lifts out on the sides. Not compatible unfortunately Spigen Rugged Armor 👎 Onn Dual Layer Clear/Black case 👍 Speck Presidio 2 Grip👎 ESR Case with stand👍
2 thumbs up! Had 2 new phones to protect so I bought 2 boxes. The first one was perfect. I just followed your directions. I cracked the next one while trying to remove air bubbles. I got a little lazy and tried to catch 2 bubbles that were too far apart. The 3rd was a charm. We ordered several different cases to try. Neither of us want to use the camera protectors since we've heard too many stories about foggy lenses, etc. We live in the humidity capital of the US. So camera protection in the case is important. Just a small lip would be fine. This screen protector went on just fine with both the ES Boost Kickstand case and the UAG Plasma. No lifting that I can tell. I wish the UAG case had a bigger lip of the front screen so I might keep looking for a different case. I have always used the Speck Presidio Grip case but there is no camera bumper this time. Disappointing. I drop my phone at least a couple of times a month. Never had any damage using the Speck case. If camera protection is not a deal breaker, I highly recommend. I'm going to be returning mine. Since I still have it, I tested and the Speck Presidio Grip case worked fine with this protector. BUT - the Speck Presidio Perfect Clear was a nightmare to get the phone out of. Once I put the screen protector on, there was no way I was going to try to put the phone back in that case. UPDATE. I just tried the ESR Shock Armour Kickstand and I think I've found my winner. Not problem with this screen protector AND it gives me the front lip around the case and camera protection on the back. And a kickstand. So the 2 case winners are that one and the ESR Boost Kickstand. Pretty much everything was reviewed by your awesome channel, except Speck. Used your links to help support your wonderful work! Hope this info helps someone.
What would be the finger print accuracy rate would you say I've the uv one from imbzbk and love the accuracy of it....only grip is it's hard to install and I've 2 tiny bubbles that no one would noticed but me 🤣and it's really bothering me
Fingerprint doesn't work worth a donkey crap... Stay away, even with struggling to register two finger prints, and increasing screen sensitivity. Could have been a decent enough screen if it actually worked.
Finally a good tempered glass protector for Samsung, i hate the messy liquid cuz it spills all ove the phone on the speaker and the edges of the phone, and the other cheap ones has only glue pn the edges and their too week, they broke easy and when you put the phone case that thing start lifting. So this is perfect!!!! Just gonna prder it RN!!!!!
hi, does the finger print id works under the sunlight? I have another branded tempered glass screen protector and figer print id works indoors. Just doesn't work outdoors. Also, the screen protector I have has the cutout for finger print, a circle area with a more transparent film near the finger print area. I know this one doesn't have that.
This screen protector breaks very fast.. it has nice coverage but you will need to replace it every couple weeks.. I went through 3 in a month without dropping my phone ever...
My only concern is the black edge of the screen protector taking away from the display. I know on my previous models with curved screens those black edges always block some of the screen. How much did it actually take away with this one?
Great screen protector. I have two issues though. The first one is the accumulation of finger prints. I'm always wiping down the phone throughout the day because of my greasy fingers. The second issue would be the fingerprint sensor. It 90% works. But that 10% does get a little frustrating. Especially after washing and drying your hands. It will not recognize your fingerprint. I have to try at least four or five times before it registers. But everything else is great. I think I will set up my facial recognition in case this happens to me again.
I just installed this and it's a no-go for me. It's absolutely not case friendly. every case I've tried with this has made it start peeling immediately from the top, bottom, or both. pass.
I installed the AmFilm today. While the installation process went alright, and the screen protector looks good, I have issues with fingerprint accuracy. I have to try it 2-3 times before succeeding. Very frustrating. The only reason I didn't opt for the Miomdoi is that it covers the front camera.
@@HighTechCheck i did reregister it, and i increased the touch sensitivity. My fingers might have been dry when i registered. I'm going to delete and retry with moisturized skin.
I see that it doesnt have a cut out hole for the camera. Have you tested out the camera before and after installation, in different lighting situations?
I'm very dissapointed with this as I applied (maybe) a little too much pressure trying to remove air bubbles and it cracked instantly. As some people have already stated, this is not suitable for all cases as it will lift at the edges creating more air bubbles. It also smudged alot, u have to constantly wipe it clean. Looks great, feels great but my experience with it was not.
I have this protector on my otterbox defender. The corners would rise when putting phone in my pocket but go back down easily. Fingerprint senser went to crap like 30% or less responsive rate even with multiple fingerprints registerd. Worst was the awful grainy greasy effect it has on the quality of the screen especiallyon white backgrounds (which is the whole reason i choose the s23 ultra over other models) ive tried both protectors and have had same ugly effect on both. There is a black boarder slightly bigger then the edge of the screen which slightly cuts off the max area of the screen. All and all it keeps my screen safe but i do not recommend this brand at all
Samsung cases works with this screen protector. I have the Samsung leather and the silicone case and they both work. No pushing on the edges of the screen protector.
In my case, bought this protector and ringkee fusion matt case. Everything went downhill after putting on the case. The protector started to come off from both sides and fingerprint doesn't work anymore (even after turning touch sensitivity on) . Total loss of my money.
I have used this screen protector for 4 months and both protectors broke/cracked unexpectedly, seemingly from just being in the pocket and from pocket pressure. Very easy to install, compared to Whitestone Dome, but the big downside is that they don't last.
Started dropping from all sides after a few hours. Installed according to instructional video. when I was going to remove it, it broke and got several cuts on my fingertips. Still have a piece of glass in my finger
It's really nice Tempered glass screen protector. Finger print just works fine. Very easy to install. 1st tried and no bubble at all. highly recommend !!!! Thanks for your review !!!
Dont recommend with spigen cases. It starts easily lifting the edges. Also with polarized sunglasses the colors on the screen turns yellowish and weird. After a day of use microabrasions appears and it is easily seen under the sunlight.
How does is handle drops, cause I will not purposely drop it, but I something that takes a drop in the gym with a bouncy case like a poetic guardian with instead the frame with this protector...this glass vs tpu film...I would appreciate your recomedation...23 ultra of course...
Hey Tony i have this glass...I have the clear unicorn beetle pro, and it comes with to frames one with a screen protector one without...you have done a video on that clear one i have....right now just to use for the moment...not sure why, but writing with the s pen sucks... Have an old note 9, that has a clayco supcase Exon case on it conscience about it and his Works flawlessly. I can get by with the built-in screen protector on my 23 Ultra with the unicorn beetle Pro, but the pain was an absolute disaster that's one of the best features of this phone trying to figure out why would you like that maybe cuz it's new and there's no oils on it yet, or that sticky feeling that you peel off left to stickiness behind I don't know, very tempted to take it off and use the frame of my own protector, not sure in what order you did that Whitestone Dome or this tempered glass I hear that you with the 9h, date-wise what do you like to Whitestone Dome or you like this one better and which one would go better if I was just going to use the frame for my unicorn beetle Pro? If you get back to me I really appreciate it I just started using the S-Pen on my Note 9 before I got the 23 Ultra lot and I really like it and just kind of funny not to use it. Awesome videos.
i'm using this screen protector with an otterbox defender case, Perfect pair!! No edge lift what so ever, Finger print works flawlessly and very easy install. This is a no brainer, No need for a wet install protector. Thank you so much for the rewiew! ❤❤
I had a few bubbles left over. My method was to lift up the protector until the air traveled to the bubble. Once there I left the protector pushed up and as a squeezed the air out, I slowly lowered the screen back down. Worked well for me. Also for the fingerprint, my finger was completely dry and glided across the screen so the fingerprint would not register. I moistened my finger just enough so it felt a little tacky on the screen, then the fingerprint reader registered my prints.
i think you're weren't supposed to press down on the 4 corners in the beginning. Press down on the center and squeegee it and all the bubbles will be gone
Milomdoi Tempered glass screen protector - Awesome screen protector, BUT it is not compatible with most phone cases. The phone case will cause the sides of the screen protector to bubble and separate from the phone. If you are not using a phone case, then this screen protector is great - if you do use a phone case, good luck finding a case that does not cause the screen protector to separate from the phone along the sides.
I wish Samsung would ditch even the subtle curve on screens. But at least we now have screen protectors that work. I remember the hell i had with my Note 8
Well I love the edge screen and I hope they keep the edge for ever inshallah alhamdulilallah
I agree. Most annoying thing about most flagship phones
What do you like about it?
They will now
that's why i got and love the bay pixel pro 8! it's the first high end phone with a flat screen since the samsung galaxy note 5.
PSA for anyone with tight fitting cases. As some have mentioned, this screen protector might be a hit or miss with certain phone cases. Unfortunately, it didn't work out for me with my Mous (brand) phone case as the case is very tight fitting and would wrap around near the edge of the screen. For this particular reason, I kept experiencing issues with micro-bubbles, corner lifting, and edge lifting due to the tight fitting case pushing up the glass. This became an huge annoyance and made it difficult to type or detect buttons along the lifted edge. I've been using it for a few weeks (since release of S23 Ultra) and the edge lifting seems to have gotten worst as the adhesive has lost it's tackiness. Fingerprint sensor was a bit problematic for me as well even with the touch sensitivity setting turned ON. Don't get me wrong, the tempered glass is definitely amazing (feeling) but wish it would had worked out for my situation. Definitely hoping for some better solutions (if any).
Side note: For installation, follow the exact steps mentioned in the video for installation! If you don't apply pressure down the middle first, then you'll end up trapping air pockets in middle of the screen.Do it correctly the first time and it might save you some headaches! haha 😂
Which Mous case do you have? I have the clarity 2.0. I was going to purchase this screen protector.
Could just use the cases in this video? I’ve got an official Samsung leather case, caudabe sheath and a dbrand grip on order and will get the official Samsung case in this video and this screen protector and do some testing
Yes mine went smooth too but it won't register my prints at all.
the "solution" is samsung needs to stop with these absolutely USELESS curved screens. i have the phantom black 512GB s23 ultra but haven't used it since i got the FINALLY flat screen bay pixel pro 8.
@Yame39 what did you get instead I done the same thing
PSA for people with the official galaxy s23 ultra leather case, no issues on my end with the protector lifting or causing corner bubbles. No issues here and it's a good fit.
Bit of a PSA for you all: if you have a case that grips tightly around your phone edges, like the Spigen Tough Armor as I do, then it will lift this Milomdoi scree protector up. I tried applying it twice and screwed up with not applying force causing bubbles, but I noticed that the edges were being lifted up.
Dang, thanks for the info! I'm getting the Spigen Ultra Hybrid S clear case. So, I guess I'll have to look for another screen protector. I'm curious to know about the screen protector covering the selfie camera with no cut out. Do you see a drop in quality when taking pictures or video?
@@micahjohnson9184 I had the Mowei UV protector on the S22 Ultra, also no cutout, and I have to say I didn't see any difference, no weird glaring or haze or anything. I'm sure this is fine as well :)
This could all have been avoided if Samsung hadn't made this screen curved... the curve is so minimal right now that I'm even thinking what's the point, just make it flat already.
@@Garrett1974 Thank you! 🙏🏾
@@micahjohnson9184 I didn't get to test it with my camera, as I was putting it on before I ever set my phone and got access to the camera. I feel like it would slightly drop in picture, but I'm not entirely sure.
The black borders also cut off the visible part of the screen reducing the screen size of what you see. So it is going to hide some of that screen. Personally its got too many cons to be worth it to me.
no bro, its outside of the bezel. i'm using S23 Ultra Protector
@@ilm-youtubestories I've used it I know for a fact it covers the screen lol
@@ilm-youtubestories which case you are using
Managed to install fine. Fingerprint sensor worked fine too. Got all the bubbles out too. Just kept lifting with my case - Spigen.
Not compatible with the Supcase Unicorn Beetle for anyone with this case. Top frame kept lifting the glass creating air bubbles. Great installation video though. I used this instead of the instructions it came with.
I was quite hyped about this screen protector and jumped few hoops to get one. Then once it was installed, I'm not impressed that much. The black bezels cover part of the screen sides. Fingerprint does work but you need to press quite hard. Overall touch feel on the screen is also altered because the protector slightly thickens from the middle to the sides which reduces sensitivity a bit in the thicker parts. Not to mention the sharp edge of the screen protector is well above the actuall phone which creates a gap - it'll catch all the gunk from your fingers, dust, etc.
I'm curious for how long I'll have the nerves to use this and then modestly return to a cheaper hydrofilm based protector.
Great, one day after the installation and quite obvious flaw emerged. The glass edges which are on both sides freely in the air are fragile as hell. I don't know I bumped my phone with but I just found out that the protector is chipped (the whole day was in my hand or on a table...).
This screen protector is probably the best full adhesive screen protector that you can get for the S23 Ultra that does not require mathematical engineering degree to put the liquid adhesive screen protectors on. Yes it does cut part of the visible screen due to the black borders around the screen protector but it's minimal. A lot of cases that wrap around the screen itself will lift the screen protector especially in the corners I will recommend rhinoshield case it goes up right to the screen protector without touching it only bad part it's a little expensive for a case.
You say it's expensive, but you haven't bought Casetify
rhinoshield crash guard?? i bought one for my note 8 a few years ago but was too scared to use it lol
I was pretty excited after installing this - took a little extra time to pry the corners and get the bubbles out, and when I was done it seemed nearly perfect. Then, alas, I could not get the phone into my Spigen case without the corners of the screen protector peeling up. I tried over and over, stretching and prying the case, but finally admitted defeat while watching the bubbles' inexorable spread across my screen. I removed the Milomdoi; corner protection far outweighs screen protection for the moment, I figure...
Did you find a screen protector that worked with your Spigen case? I had the same thing happen to minee with the Spigen tough armour so now looking for a new screen protector
@@Flemo2140 I didn't. I ended up using an OtterBox Commuter case with a Whitestone Dome screen protector. I hope you find a good solution for your phone.
Idk, I tried this one before White dome glass. It was horrible with FP sensor even after re-registration
Same here. I ended up ripping it off and returning it. The fingerprint scanner worked, but only 25% of the time. The times it did work, it was definitely a lot slower, and I had to press down pretty hard. I don't recommend it. I bought the one from Whitestone and I'll see if it's any better. It's pretty expensive tho.
it's not the best yeah but it's ok when you put your fingerprints multiple times
So, with this screen protector what cases actually work withoutany issue ? I'm looking for minimalist look but good protection.
Simtect Camera Protector Case and Carveit Wood Walnut Case works. the carveit was way more premium then i thought it would be. Ringke and Spigen cases did not
With it's 0,16mm thickness allows the fingerprint sensor work pretty well and giving a very decent protection against scratches, I love that one over the thicker ones.
I've bought atleast 10 packs of this type of protectors (so 20 total), they break very easily. And as others said, certain cases cause the sides to lift. Definitely not worth it in my opinion.
as this screen protector cover the front camera, does it affect the picture quality..?
Unfortunately it does. I am still looking for other options for tempered glass for s23 ultra..
😂I tried to remove that last bubble in the corner by just barely lifting the glass with the tool - crack. The second cover fit better. Thought I had it made. This time a couple of small bubbles formed but no problem. A half hour later I set my Ultra on the wireless charger and elongated bubbles formed the full length of the phone on both sides at the curve. Several larger bubbles formed at the top and bottom. I tried to squeege the bubbles to the corners on both sides and the glass cracked in two places. Nasty mess to get off. Back to the film.
I have been looking for a screen protector for nearly a week they all seem to have very complicated installations thanks for the video.
Installation was very easy, i had no bubbles on the first try. I did it like you. 4 corners press first, then the full middle section and in the last the sides nice and slow. worked perfect.
Nice!
Do you use a case? If so, which one?
@@vinnieducy947 Only fitting case i found so far is from cresee, more testing tomorrom 😅
@@vinnieducy947 After more testing i can say very many cases fits for the tempered glass protector. Only not fitting was from spigen, caseology and Ringke...
@@stefank.4746I think otter box also cause some bubbles occasionally
Thanks! This is how every review should be done! ... Well done man!
The best screen protector that I ever found was one that Samsung pre-installed on all S20 Ultra from the factory. Never had bubbles on it and still going strong to this day. I upgraded since to the S23 Ultra and the film seems to be the best.
Does it have a noticable hole for the fingerprint? Wasted 25 bucks on a protector with this annoying circle
These are great however the edges are so brittle I've gone through 8 in 4 months.... the absolute lightest bump on the edge shatters it
That slight bit of resistance you say it's too much for me there's too many good ones out there a little thicker but are really good glass and have zero
Just installed it, it fits perfectly my case, when i say perfectly i mean 1 more millimeter top or bottom and i would have to return it.
Fingerprint accuracy doesn't seems to be the best tho, and it's definitely slower....but it works
It is a tight fit but like you said, it fits. It’s been impossible to find a good tempered glass protector that’s doesn’t use liquid adhesive that’s worth it. I was so excited when I saw this lol
Would you mind telling us which case you are using? I need that case. Please!
@@vinnieducy947 UAG pathfinder
@@G-O-N-x *buys one of the most expensive cases*
I agree with your assessment. I have come to the same conclusion.
Can you tell me about the black border.. is that black border blocking the screen.. i cant go for uv tempered because will spread into spen or front speaker.. so i want full glue tempered with fingerpint support also.. i only find this model.. i tried lito 3d.. but fingerprint is not working correctly.. also its black boder blocking screen little.. so pls tell me is this blocking the curved screen or top
Well...mine lasted about 4 days and now it is cracked. Have no idea how it cracked i have been really careful. The installation was great , but unfortunately it does not last long. 😢
thank you. i just switched back from an iphone to this and was having a hard time finding a screen glass with full adhesive since it's so common for iphone protectors.
What about the black frames of the glass protector? I heared interfear with some of the display, since you have a black background in your cellphone you may not noticed, I would love to see another review checking this and also using the front camera since the glass covers it
I also have this protector and it went on flawless! The fingerprint sensor and spen work great as well. The black edges do seem to slightly interfere with the curved part of the display blocking some of the waterfall bezel. it doesn't bother me much but this would be hands down best protector if it was completely clear. seems stronger then other UV brands with not mess. front camera seems perfect to me to interference. i did not use the back camera protectors due to how it just sat across all the lenses
@@MastiffRonin Thanks bro
Its got a black border that covers up the corners of the screen, making them look more rounded.
Thank you! Just had to make a claim on BRAND NEW S23Ultra Lavender phone😭 Verizon rep sold me cover and screen protector and said I'd never have to worry buying another one...fast forward...Crack in curve which I am hearing now the curve is an issue. Ugh I've had every note and can't get away from them, cause I love my pen. I'll be ordering this cover 2nght🥰
It fits well with poetic cases. Downside, fingerprints reader is not working anymore
Could you make a video of what cases are compatible with this screen protector? i bought the ringke fusion x as you recomended on other video and it lift the edges when is on my pocket.
Any chance at a video of trying this with different "rugged" cases that are not too bulky. Or anyone know of any that works well with this?
Thanks for the video what is the name of clear case you have in this video
My experience with Milomdoi has been somewhat disappointing. Followed the instructions after watching the video several times. Removing a few side bubbles from the first installation was a little challenging and I ended up cracking the glass. Ok, no worries, I have a backup. Installed the second, fewer bubbles got them out, and it looked like a clean install. The next day, air bubbles ran down both sides. I'm still seeing them pop up down the sides. So my vote is a BIG NO on Milomdoi.
It's definitely a hit or miss, cuz I used this product and it has worked great and yet when decided to put a new protector on it looks like shit lol air pockets littered throughout. But again it has worked in the past so...50/50 maybe?
I've had something similar for the Oneplus 7 Pro, full adhesive, and you had to lift up the corners one by one to squeegee out the bubbles, but once it was done it was fully adhered, also on the curved edges yes. Hope this version is somewhat case friendly... I believe the black edges are there so you can lift it up without seeing it (could be a little bubble/dust particle under there if you lift it)
It’s going to be a tight fit for the most part and unfortunately the only way to know how it fits with your particular case is to try it.
No good breaks way to easy trust me they suck
Hi there, question if i could - What do you consider the *Toughest* protector and case combo? Ive had my S23U less than a month, and despite a case and a glue on protector it now has two seperate nasty cracks in it from drops onto gravel. I used to run Otter Defender cases, but what they offer for the S23U isnt anywhere close to what it used to be. Any thoughts? Thanx!
For the camera lens protector, I would advise not putting the ultra wide one as the "zoom in mic" is below it.
Hello everyone. I just received this screenrotecror - my third in a row now. It is true that this one has not the irritating fingerprint circle, but the screen resolution is shit! Looks almost like dusty and similar to bad resolution screens. I do not know what to do with all these shitty screen protectors, I am so tired. Does anyone know where I could buy a fucking normal screen protector which is 100% clear and without this idiotic circle?
Best screen protector I've ever used 👌it's on my s23ultra no issues whatsoever
Thanks for the great installations and reviews. I did try this one and fingerprint was hit or miss. no bubbles but the fingerprint was annoying so I pealed off ever so gently from the corners and it quickly cracked in the center and was an absolute mess getting off. Little pieces where left on my screen and thankfully I escaped with no damage. Went back and will probably stay with AM film.
I’m sorry to hear you had a bad experience, I typically have issues with the sensor when my hands are dry. It helps if I use a bit of lotion and that seems to help.
Agree 100%. Had to fight to even register any fingerprints with this one on - even with the sensitivity switched on, and getting it off was the worst! Shattered like safety glass into thousands of shards. No bubbles in the center but a battle to rid them from the curved edges. Gave up and went back to a Torras film protector that's as good a film protector as I've ever used, film is just not the same as glass.
Just installed it yesterday and I had the same issues. Finger print scanner doesn't work well, may be worked 25% of the time. Also cracked when i tried to remove it. Perhaps they can refine this screen and it'll be a hit product.
I know this thread is old but do either of you remember if you increased touch sensitivity in settings?
I use an Encased thin armour case and it doesn't work. The bubbles keep coming back along corners and edges even after I press them out.
Also I used my thumb to push a bubble out up near the camera, and when my thumbnail went over the lip the force of just my nail going over the edge fractured the protector from the camera notch down. (I'll take the blame for this)
Amazon user reviews are only 2 stars out of 1800 reviews so not impressive in the least. (Canada)
It is the ONLY non liquid glass protector with full screen adhesive though. I'm hoping other companies make alternative options soon.
Good screen protector I had a couple bubbles didn't do the installation the same way unfortunately came across your video afterwords but , One thing to mention it does slow down the overall screen response, I have the screen protector setting turned on just noticing phone doesn't feel the same as before Big mention
You mentioned the adhesive protection..
Those the plastic tpu? I am a clutz with this temper glass break with one fall?....also you can buy individual glass cam glass i thought that was what you were putting on it has a template like that they fit around the cam and stay on to protect your lenses....getting my galaxy in the mail today excited don't know what case to get I have a note note 9 with that plastic screen protector tpu....and 4 years ago I bought the clayco exeon by sup...tpu back bumper that comes with a screen protector built i just through the one extra and have loved it. One bubble wbe screens off but can't see if with the display on. Cut outs are much bigger that the more note 9 for the 23 ultra, so I am looking g for tempered glass for the lenses...poetic guardian seems like my only choice or punk case come with and extra frame without protector if you choose your own..I just wanna know if anyone can tell me if I drop my phone in the the way I have before with my current bouncy case clayco...saved me every time, same kinda for the new one...will the tempered glass break...will I be going threw sheets of tempered glass, or tpu? Open to suggestions around the board... toughest bumper plus SP I stalled....has to be able to survive a 5 foot fall if it falls out while I am doing pull ups that would be the worst it would get next to short falls out side which rarely happens...gym is my concern falling off tables...appreciate any suggestions.
What is the name of the glass
And no awful hole!! Been struggling to find a good screen protector for my 23 ultra, so I think this one will be my next purchase for sure
After holding this in a pocket for awhile I observed it is moving. I can even move it back to left, right, down, up. It's strange, force pushing this will move this successufly. It catches scratches also, little bit disipointed. I also don't understand why version which I have front camera open space which I don't see on your video.
I installed this screen protector. It looks perfect, no bubbles or dirt beneath it but the fingerprint sensor doesn't work at all.
Any advice?
Yeah I bought this one first black border isn't that annoying to deal with but the front lense of the camera is covered in the adhesive and blurs the photos a tiny bit and the edges get slightly lifted by the phone case definitely no my favorite
Just ordered mine today 🤗 The am film wasted my time and money,The liquid screen protectors are a headache for the s23ultra hopefully I'm satisfied with this one thanks for the video and installation 👍
Are you going to have some Screen Protectors to test with the S24U soon? I hope we have many more options of screen protectors for the S24U and it's "nearly" flat display!
using it with the ultraclear mous case seems to be working well enough. i just suck at installing these so lots of microbubbles for me
I put the protector in the bottom first then lowered it down. I pressed on the four corners and part of the protector was hanging on the guide. it cracked. The second one worked better, but there are still bubbles that I can't get out. I tried lifting the top left corner just a little and I think the corner cracked a little. Now it seems like bubbles keep forming in that same corner and won't go away. Oh well. I will live with it now.
What case are you using with it? I tried with a spigen rugged armor and it lifts out on the sides. Not compatible unfortunately
Spigen Rugged Armor 👎
Onn Dual Layer Clear/Black case 👍
Speck Presidio 2 Grip👎
ESR Case with stand👍
2 thumbs up! Had 2 new phones to protect so I bought 2 boxes. The first one was perfect. I just followed your directions. I cracked the next one while trying to remove air bubbles. I got a little lazy and tried to catch 2 bubbles that were too far apart. The 3rd was a charm. We ordered several different cases to try. Neither of us want to use the camera protectors since we've heard too many stories about foggy lenses, etc. We live in the humidity capital of the US. So camera protection in the case is important. Just a small lip would be fine. This screen protector went on just fine with both the ES Boost Kickstand case and the UAG Plasma. No lifting that I can tell. I wish the UAG case had a bigger lip of the front screen so I might keep looking for a different case. I have always used the Speck Presidio Grip case but there is no camera bumper this time. Disappointing. I drop my phone at least a couple of times a month. Never had any damage using the Speck case. If camera protection is not a deal breaker, I highly recommend. I'm going to be returning mine. Since I still have it, I tested and the Speck Presidio Grip case worked fine with this protector. BUT - the Speck Presidio Perfect Clear was a nightmare to get the phone out of. Once I put the screen protector on, there was no way I was going to try to put the phone back in that case. UPDATE. I just tried the ESR Shock Armour Kickstand and I think I've found my winner. Not problem with this screen protector AND it gives me the front lip around the case and camera protection on the back. And a kickstand. So the 2 case winners are that one and the ESR Boost Kickstand. Pretty much everything was reviewed by your awesome channel, except Speck. Used your links to help support your wonderful work! Hope this info helps someone.
Plz give the link of the same transparent case that you showed in this video?
Question, will this fit the Torras s23 ultra case? I'm looking to change from a polymer screen protector to a tempered glass one.
Which case you are using with it?
What would be the finger print accuracy rate would you say
I've the uv one from imbzbk and love the accuracy of it....only grip is it's hard to install and I've 2 tiny bubbles that no one would noticed but me 🤣and it's really bothering me
Fingerprint doesn't work worth a donkey crap... Stay away, even with struggling to register two finger prints, and increasing screen sensitivity.
Could have been a decent enough screen if it actually worked.
Finally a good tempered glass protector for Samsung, i hate the messy liquid cuz it spills all ove the phone on the speaker and the edges of the phone, and the other cheap ones has only glue pn the edges and their too week, they broke easy and when you put the phone case that thing start lifting. So this is perfect!!!! Just gonna prder it RN!!!!!
hi, does the finger print id works under the sunlight? I have another branded tempered glass screen protector and figer print id works indoors. Just doesn't work outdoors.
Also, the screen protector I have has the cutout for finger print, a circle area with a more transparent film near the finger print area. I know this one doesn't have that.
The adhesive glue glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ?
Would appreciate the help 🙏🏼
This screen protector breaks very fast.. it has nice coverage but you will need to replace it every couple weeks.. I went through 3 in a month without dropping my phone ever...
yep same thing happened to me
No front camera cut out? Wouldn't that create issue in selfie picture quality?
My only concern is the black edge of the screen protector taking away from the display. I know on my previous models with curved screens those black edges always block some of the screen. How much did it actually take away with this one?
Great screen protector. I have two issues though. The first one is the accumulation of finger prints. I'm always wiping down the phone throughout the day because of my greasy fingers. The second issue would be the fingerprint sensor. It 90% works. But that 10% does get a little frustrating. Especially after washing and drying your hands. It will not recognize your fingerprint. I have to try at least four or five times before it registers.
But everything else is great. I think I will set up my facial recognition in case this happens to me again.
A oleophobic coating will fix this
The second issue is with the phone , even I have the same without and protector
I just installed this and it's a no-go for me. It's absolutely not case friendly. every case I've tried with this has made it start peeling immediately from the top, bottom, or both. pass.
I installed the AmFilm today. While the installation process went alright, and the screen protector looks good, I have issues with fingerprint accuracy. I have to try it 2-3 times before succeeding. Very frustrating.
The only reason I didn't opt for the Miomdoi is that it covers the front camera.
Have you re registered your fingerprints after the installation? Also when my fingers are dry my phone has issues reading my fingerprint
@@HighTechCheck i did reregister it, and i increased the touch sensitivity. My fingers might have been dry when i registered. I'm going to delete and retry with moisturized skin.
@@HighTechCheck I moisturized my thumbs and re-registered fingerprints. They work better for sure!! Thanks for the tips!!
@@hbhavsi amfilm tempered glass?
@@nasmanxtra yes
I see that it doesnt have a cut out hole for the camera. Have you tested out the camera before and after installation, in different lighting situations?
I didn’t go that in depth for testing it
I'm very dissapointed with this as I applied (maybe) a little too much pressure trying to remove air bubbles and it cracked instantly. As some people have already stated, this is not suitable for all cases as it will lift at the edges creating more air bubbles. It also smudged alot, u have to constantly wipe it clean. Looks great, feels great but my experience with it was not.
I have this protector on my otterbox defender. The corners would rise when putting phone in my pocket but go back down easily. Fingerprint senser went to crap like 30% or less responsive rate even with multiple fingerprints registerd. Worst was the awful grainy greasy effect it has on the quality of the screen especiallyon white backgrounds (which is the whole reason i choose the s23 ultra over other models) ive tried both protectors and have had same ugly effect on both. There is a black boarder slightly bigger then the edge of the screen which slightly cuts off the max area of the screen. All and all it keeps my screen safe but i do not recommend this brand at all
Which cases are fitting with this tempered glass ? I tryed with spigen slim fit and it lifts the edges... ☹
Samsung cases works with this screen protector. I have the Samsung leather and the silicone case and they both work. No pushing on the edges of the screen protector.
Any link for EU Amazon? The Milomdoi I can find is only the flexible scratch protection.
Does this film protect impact as well as the uv glue screens?
It worked for me. Thank you so much. Subbed!
@HighTechCheck was is the case that you are using in this video. Looking for a case and screen protector combo
Just what I need. Thank you.
In my case, bought this protector and ringkee fusion matt case. Everything went downhill after putting on the case. The protector started to come off from both sides and fingerprint doesn't work anymore (even after turning touch sensitivity on) . Total loss of my money.
I have used this screen protector for 4 months and both protectors broke/cracked unexpectedly, seemingly from just being in the pocket and from pocket pressure. Very easy to install, compared to Whitestone Dome, but the big downside is that they don't last.
True went through four of them in 2 weeks
Do you kids play baseball using your phones ? Lol
@vinlondon8904 how long have you had the screen protector for?
Heat the protector with heat gun then push again so it will melt the adhesive then stick much better and clarity
I got this screen protector witha otterbox defender, its work perfectly
Can you also leave the link for that clear case 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
Started dropping from all sides after a few hours. Installed according to instructional video. when I was going to remove it, it broke and got several cuts on my fingertips.
Still have a piece of glass in my finger
It's really nice Tempered glass screen protector. Finger print just works fine. Very easy to install. 1st tried and no bubble at all. highly recommend !!!! Thanks for your review !!!
Which case you are using with it?
Thank you for you instructions and scratch tests
Dont recommend with spigen cases. It starts easily lifting the edges. Also with polarized sunglasses the colors on the screen turns yellowish and weird. After a day of use microabrasions appears and it is easily seen under the sunlight.
What screen protector would you recommend for a Spigen case?
Even the thin fit one?
@@uprising7122 Yes. I just ended up getting a different one and it works great.
@@SweatyCubes which different one?
Waiting for mine to get delivered
How does is handle drops, cause I will not purposely drop it, but I something that takes a drop in the gym with a bouncy case like a poetic guardian with instead the frame with this protector...this glass vs tpu film...I would appreciate your recomedation...23 ultra of course...
Hey Tony i have this glass...I have the clear unicorn beetle pro, and it comes with to frames one with a screen protector one without...you have done a video on that clear one i have....right now just to use for the moment...not sure why, but writing with the s pen sucks...
Have an old note 9, that has a clayco supcase Exon case on it conscience about it and his Works flawlessly. I can get by with the built-in screen protector on my 23 Ultra with the unicorn beetle Pro, but the pain was an absolute disaster that's one of the best features of this phone trying to figure out why would you like that maybe cuz it's new and there's no oils on it yet, or that sticky feeling that you peel off left to stickiness behind I don't know, very tempted to take it off and use the frame of my own protector, not sure in what order you did that Whitestone Dome or this tempered glass I hear that you with the 9h, date-wise what do you like to Whitestone Dome or you like this one better and which one would go better if I was just going to use the frame for my unicorn beetle Pro? If you get back to me I really appreciate it I just started using the S-Pen on my Note 9 before I got the 23 Ultra lot and I really like it and just kind of funny not to use it. Awesome videos.
Will this work with UAG cases?
will this screen protector work with a samsung case. I got my case from the samsung store.
i'm using this screen protector with an otterbox defender case, Perfect pair!! No edge lift what so ever, Finger print works flawlessly and very easy install. This is a no brainer, No need for a wet install protector. Thank you so much for the rewiew! ❤❤
I had a few bubbles left over. My method was to lift up the protector until the air traveled to the bubble. Once there I left the protector pushed up and as a squeezed the air out, I slowly lowered the screen back down. Worked well for me. Also for the fingerprint, my finger was completely dry and glided across the screen so the fingerprint would not register. I moistened my finger just enough so it felt a little tacky on the screen, then the fingerprint reader registered my prints.
i think you're weren't supposed to press down on the 4 corners in the beginning. Press down on the center and squeegee it and all the bubbles will be gone
Is it case friendly?
Thanks for the review. She helped me buy a great product. Installation is really simple
Is this screen protector compatible with UAG Monarch case?
Milomdoi Tempered glass screen protector - Awesome screen protector, BUT it is not compatible with most phone cases. The phone case will cause the sides of the screen protector to bubble and separate from the phone. If you are not using a phone case, then this screen protector is great - if you do use a phone case, good luck finding a case that does not cause the screen protector to separate from the phone along the sides.
Does this case work with the OtterBox Symmetry Clear Series Case?
Doing too much installing that. Never had it take that long to put on. You need to lay it on and press from the center first. Works every time.