S23 Ultra Whitestone Dome Glass Install! Step by Step
Вставка
- Опубліковано 14 лют 2023
- Get it here! geni.us/2L2B0D
In this video, we're going to be installing S23 Ultra Whitestone Dome Glass! This is a step-by-step tutorial that will show you everything you need to know to install S23 Ultra Whitestone Dome Glass yourself!
If you're looking to upgrade your home with a new S23 Ultra Whitestone Dome Glass installation, then this video is for you! We'll show you how to install the glass, as well as some tips on how to maximize its beauty and performance. Get ready to learn everything you need to know about this exciting new product!
This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.
SUBSCRIBE here, it's FREE! : goo.gl/kNbs3J
Our Amazon Store for everything we review
www.amazon.com/shop/ebpmantec...
►My source of COPYRIGHT Free Music. Use my link below for free 30-day trial to Epidemic Sound
share.epidemicsound.com/ebpman
For Business inquiries: ebpmanreviews@gmail.com
Tubebuddy www.tubebuddy.com/ebpman
My Gear
Canon M50 amzn.to/2K7DDs3
Rode Mic amzn.to/2KCvqLM
Sony A6400 amzn.to/2KAsxuZ
Rode Wireless go amzn.to/2IGPVVh
Get Amazing Music from Epidemic Sound here bit.ly/2JQF1O0
-------------- FOLLOW ME ON SOCIAL MEDIA ----------------
Twitter: / ebpmanreview
Facebook: / ebpman
Instagram: / ebpman_reviews
My VPN PureVPN
My VPN billing.purevpn.com/aff.php?a...
#ebpman #ebpmantech #ebpmantechreviews
DISCLOSURE ‣ I was provided this product for review purposes. All thoughts and opinions expressed herein are my own and not influenced by the developing company, and/ or its affiliates, in any way. Copy approval or an early preview of this content was not given to anyone. Some links provided above are affiliate links. As an Amazon Associate I earn from qualifying purchases. Honesty is key on my channel, thank you for supporting me!
| - Наука та технологія
Get it here! geni.us/2L2B0D Day 2 with this protector! Make sure you watch the full thing once. I gave two views to the tape placement just to make sure you dont make any mistakes
It's me or the protector it's a bit lower on the punch hole ?
@@Scxrface28yes. it did drop on me a bit. That happend when I put the rubber block. I did my wife's phone and made sure it didn't slide. So far no issues though leaving it as is
Everytime I get a new Samsung phone, I always come to your channel to watch the video about putting these screen protectors on. Even though I've done this a bunch of times, I always watch your video as I install it. Great video as always
Thank you so much for this step-by-step installation video! It was more complicated than I expected, but you so calmly took me through, and your steps worked perfectly!
You helped me with the S21 Ultra install now with the s23 ultra install thank you 😊 very much great videos.
Watching this 2nd time to install my own dome glass. Great review
Thanks for the video. I get mine tomorrow so I will be applying the screen protector tomorrow. Good timing.
THANK YOU!! Because of your video I ordered and just installed my Dome Glass screen protector. I did waste one of the vials of UV gel balancing my phone, but get everything cleaned up amd started over at inserting the phone into the jig. Thank You for the step by step tutorial as it was WAY better than trying to read the instructions!
Thank you for the awesome video👍Love the quality of this vid!
Glad you enjoyed it!
Thank you. Very helpful
Cracked my S23 Ultra a few weeks ago, bought this screen protector. I DO NOT regret it one bit!! Paranoia was definitely a factor as to not get bubbles underneath the tempered glass, but it's on now, and not one single bubble!!
Thank you for this video.
Hi! I want to ask does the phone holder or car holder lift the tempered glass when using it without a phone case?
hello, do you recommend any compatible cases compatible with this screen protector ?
Did you read the directions? You're supposed to put one of the absorbent pads at the bottom of the jig, too.
Installed the 1st one. The S Pen would only work at the top 1/4 and bottom 1/4 of the screen. So I thought I might have installed it incorrectly. So I removed it and installed the second one. Everything worked fine. Fingerprint sensor and S pen. After a few weeks it is back to the S Pen only working on two very thin strips on the screen. I have checked all settings. If I pull the screen protector off it works 100% all the time. I veeified this after removing the 1st one. The finger print sensor still works but not as quickly as it did after I installed it. I never had any issues with my S21. But the installation frame was totally different. It had a wind-up mechanism that slowly lowered the screen in position. The glue spread evenly and fully on the S23 and I used the rubber weight and followed the exact curing steps. I love the protection but if the S pen issues can't be fixed I will remove it and go with a competitor.
That's really odd about the S Pen and the screen protector. I know my S Pen works perfectly fine with the screen protector installed. For your fingerprint scanner, you should re-register your fingerprints and it should work flawlessly after.
Best video, same paranoia lead me to a successful result 💯🤘
Great content. How well will the Whitestone dome glass hold up using the supcase unicorn beetle pro, or I-Blason Armorbox or poetic spartan or otterbox defender pro. Being that lips protection is great, as well as the sides, do you think the glass will lift?
I know it works with the Unicorn Beetle Pro, as another reviewer I watched showed the screen protector installed with the case on.
Amazing product indeed.Whitestone dome glass is best solution for S23 Ultra glass
thanks for the tutorial, i just finished the installation but i left the square white rubber piece for more than 30 seconds i believe 1 minutes, and it left a a very light white mark, is it going to disappear ?
The WSD for my s²² Ultra seemed brittle 🤔 I've been through x4 since launch date and i do baby my phone's and carry them in a vertical lined belt holster.
It picked up nicks along the edges too easily so hopefully the WSD for the s²³ series is better quality.
The rubber part is new 🤔 When I fitted mine after the first curing I gently pressed down on the fingerprint scanner area and then second cured.
After my 4th WSD picked up yet another nick I've moved to the official Samsung Tpu Screen Protector which feels awesome and works 100% with the scanner.
Thank you for sharing your fitting experience. Much appreciated 🙏
I saw that on my s22 also. Weird but so far I only had one protector on my s22 didn't have to change it. I will post some images as well on Instagram and tiktok
The WSD for my s21 ultra were also so brittle on the edges i just gave up. like i dont understand do people really get them to work and not break the edges. Not sure what to put on my S23u
Hi, is this glass compatible with Spigen cases?
Top Tip:
You will notice when he pulls the tab holding the glass up, that it pulls and moves the glass out of position. Once you pull the tab make sure the glass is evenly aligned top to bottom of the screen. My first attempt made it sit too low causing a problem.
You can move it a bit with light touch, don't press down hard, just move it so it sits even and flush.
Question for you EBMAN. Is it supposed to have that gap in the top of the screen? The protector is noticeably gapped from the top of the phone and shows on the camera gap.
No the gap I have is because I slid the screen by mistake. I did my wife's phone. No gaps present. It's closer to the top. That was my bad when I paced the rubber block
I love these protectors but there's just no better feeling than going naked on these S Series phones. As always your video is great. I'll probably try one on my newest device some.
why not do the middle with the cure light on the second pass?
How is when compared with AMFilm?
Make sure your kit comes with everything that's supposed to be in the box.
Mines didn't come with the cord for the curing light, so thankfully I kept my old one I did on my Note 10 Plus.
Had I not had my old one, the whole case would've been useless 🤷🏽♂️
The kit doesn't come with a cable. You're supposed to use your phone cable
How can i remove a single small droplet of glue from the ear speaker after installing? No functionality issues no sound issues it just looks bad in different lighting. Pls anyone
Question: if you crack the screen protector glass, how do you remove and replace the glass?
Super easy to peal off. I have a video on that as well ua-cam.com/video/5-Am9gJ8f-A/v-deo.html
Does the s23 have a plastic screen on the screen already that needs to be removed before installing the glass?
No, Samsung has cheaped out and installed nothing on the screen from the factory. They used to come with pre-installed protector.
so my issue was when i set the screen down and placed the block over the sensor area that the liquid would seep out and over the screen and would get underneath the block making a sloppy mess. had to clean up then replace only for it to happen again so i placed a little towel under the block to absorb the liquid. pretty annoying tbh .worst part was getting the mic covered.... that part was a pain and am paraniod that i didnt do it right and have that liquid inside the speaker...
Then you're doing it wrong. You supposed to put the glue on the phone screen, then the glass, then the block. Only used 1 tube of glue. Did you even read the instruction or watch the video?? It's not rocket science...
@Steve L followed the videos instructions perfectly and have installed these screen protectors on my other phones before, never had that issue before.
What is incorrect in the video is the placement of the strips on the jig. Along with the strip on the sides one should be installed at the bottom. Worst case scenario you get LOCA, the glue, on the edges of your phone once your completely done. Just peel the glue off, it will come off easily if peeled off.
How come the protector installed so low on he phone? Even part of the screen is not covered witch should be impossible to happen?
Unfortunately the 3rd pad wasn't used at the bottom of the jig causing the glass to shift when dropped.🤷♂
It even happens with the pad. You must make sure it's aligned before curing
Well I followed along and did exactly as you did but the fingerprint sensor just says my print doesn't match. Such a pain in the ass for a failed result.
They say on all the videos to just delete your first set of prints and reinstall a second time.
@@allenandlaurendarie5607 I deleted my prints before I even installed, this is a common practice with any screen protector if you expect a fingerprint sensor to read.
enable touch sensitivity @@EvilSSP
@@fleetadmiralsakazuki This is 8 months old so we're well past the point of advice, but at the time I deleted saved fingerprints and turned on sensitivity, still didn't work.
You forgot the absorbent cotton strip on the bottom.
So this is actual "glass" correct?
I had 2 different att reps from 2 different locations tell me there is no glass screen protectors for samsungs curved edge screens.. the big jerks
They might mean there aren't any screne protectors that will fully protect the full screen. There are gaps along the edges of the screen, the protector only curves slightly at the edges.
To anyone that's fitted one how does the fingerprint scanner behave ?
Really well. If you find you're having difficulty with it picking up your fingerprint, just re-register your prints.
@@cameronmalchow7597 Unfortunately that's not always a step that works. Even with increased sensitivity activated in the display settings. I've used Whitestone Dome for years and fingerprint unlocking has always been a bug bear. That's why Whitestone added a plastic weight to try and help and now a square piece of rubber to weigh the protector down when fitting it.
@@Lee-tt9fe Sorry to hear you've had difficulty getting the fingerprint scanner working with Whitestone Dome. I have used them for my Note 20 and now my S23 Ultra. I have not experienced any problem with the fingerprint scanner. Obviously, YMMV.
everything was going perfect until you left that top black thingy from the Jig and it pushed the glass towards the bottom too much. Not a perfect fit I would say. I would definitely remove it instantly.
I don't like any screen protector on my phone because it spoils the look and feel of the phone. last screen protector I had on Note 10
been doing this since note 8, white stone is expensive, cheaper one also work fine just coat them with olieophobic coat ...1/10th the price
Im so scared dor liquid to run into my earpeice on top
Anyone too scared to apply these UV protectors like I am? I've been using the Milomdoi tempered glass protector off of Amazon for my s23 ultra. I'm a clumsy fool and I'm not afraid to admit that I've dropped this phone twice on the screen already & this protector's held up!
These UV tempered glass screen are abosolutely amazing but yeah, if you're clumsy or can't follow instruction then I would recommend avoiding this.
Is nobody here gonna talk the fact that there's a giant gap on the top of his phone??? (14:16)
Step 1: make sure Whitestone included all the tools. I got mine and it didn't come with the slide pin, which basically made the entire setup useless. Thankfully I ordered from Amazon and they gave me a refund so I could reorder another. The second package included the pin.
Yup, my kit came with pin, but it was the wrong version for older kits. I was also missing some alcohol pads, another dust sticker. Kinda frustrating.
Exactly bc mines didn't come with the cord for the curing light, so thankfully I kept my old one I did on my Note 10 Plus.
Had I not had my old one, the whole case would've been useless 🤷🏽♂️
Can confirm. Perhaps people will start adding this into tutorials at the beginning. Mine had the black slide pin, but the grey adapter piece that locks on and holds the pin was non-existent. I also didn't receive a power cord for the UV light but I'm wondering if they assume we all have a cable at home. My brand new S23 Ultra is back in his box unused and he will have to wait for my replacement package.
@@MrsS3lfDestruct It sucks, eh? Good call on putting it back in the box. I didn't have that option as my old phone stopped reading SIM cards, so I had to just baby the phone and pray I didn't drop it. I do have insurance on the phone in case of such accidents, but still.
The screen protector is awesome, btw. It's been nearly six months and I'm just about ready to put on the second screen protector. You might get more mileage, as I'm a little rougher with the phone because of my job. But it has lasted longer than the G-Color glass screen protectors I used on my P30 Pro.
I can never understand people leaving their screen out in the open that long for dust to settle. Bro had his just sitting there in the open for 6-7 minutes Lmao wut. I would have tried to get this done in under 45 seconds from when I used the stickers to remove all the dusts!
All UV glasses will get some sort of bubbles on the edges... And fingerprint will work 30% and you need to press very hard on the screen
So far this one is working fine. I will post close ups on Instagram. Also I have not turned on sensitivity or have had to press hard.
@@ebpman I think what he's saying is in general all uv glass screen protectors all require you to press slightly harder which I agree. I don't think some people who review these screen protectors are not honest, as most say it works the same way which is not the case because the truth is you really do have to press slightly firmer
@@sinigangpapi3379 I don't have to press harder or anything for it to register my fingerprint. What you may need to do is re-register your fingerprints on the phone.
YOU FORGOT TO PUT AN ABSORBING PAD ON THE BOTTOM OF YOUR PLASTIC FRAME.
Out of focus Detail shots, poor & inaccurate component descriptions, orientation descriptions unclear . . . . I'm glad you're not giving a tutorial on Aircraft Maintenance. The idea is to take fairly complex procedure, which this appears to be, and make it clear & understandable, which wasn't done here. This is helpful at best but it leaves you guessing as to what you mean to describe on several points.
The S21 Ultra install was the best. I think Whitestone went backwards here.