Finaly got my stage 4 home. I will mount it with 30-60 for street drifting. How much lockup does it provide if i mount all clutches like in the video? 75? Maybe to much for street driving?
Yeap, it would be 75 on full throttle. But it won't be too much as the preload doesn't go over 100nm, so the car drives normally. Try it. I'm confident you'll love it.
Hi, im now workong on the diff and is it right that i have 2 dog ear plates to much on ste stage 4 set? Also do you have an idea where i can get that small preload shim? One is broken in my original diff. Thanks ahead
That's fine. Check this link for small shims. racingdiffs.com/collections/differential-tuning-parts/products/bmw-168mm-188mm-210mm-lsd-gear-shim-washer
Can this kit be adapted to 188mm diff for BMW E9/E3/E12 etc? This is the sideloader version. Or can at least the pressure plates be used with some clutch discs? :)
@@RacingDiffs My diff only locks well on changing direction. But sounds smooth. So I want to refurbish it Do you think its nessesary to change all bearings too?
@nsheehy9953 if you don't have any sounds on acceleration and deceleration, then they can be used further. However, it would be convenient to change them once the diff is on the table. Most likely, they have never been changed... it would appreciate complete refreshment. 😄
Is stage 3 a drop in fit into a stock bmw m6 diff? The car is 2009 bmw m6 v10 i heard the stage 4 needs like bigger case or something but atage 3 is for stock right?
For M6 you need a totally different set. Please check the link below. racingdiffs.com/collections/lsd-clutch-plate/products/bmw-m3-m5-m6-z4m-lsd-differential-rebuild-kit
Very well done !
VERY concise and detailed.
Am installing 2 of these with a customer and they are of SUPERIOR quality.
Thank you for your feedback. Much appreciated! 👍🏻
I buy stage 4 from you,very quick delivery very well ordered box,I'm very pleased from your services!!!!thank you!!!
Glad to hear that. Thanks for sharing your feedback
Very good video, thanks! I think stage 2 is the upgrade I'll go for with my daily driver E32.
Excellent choice 👍🏻
This is exactly what I need for the e36!
Very detailed video, except maybe you should have mentioned the oil shim orientation if this applies. Cheers, ordering soon...
At 13:11 ohhhhhh Hooooo Hooooo that was slick Chekhov. I'm watching you....
i love yoyr videos so mucj!!
Damn, very good video. I still need to install progressive LSD sins o bought.
For what use is it better to have more lock?
Does each stage have different type of utility or basically the more lock the better?
Thank you for this video. Êxcelent explained!
Glad to hear that!
Finaly got my stage 4 home. I will mount it with 30-60 for street drifting. How much lockup does it provide if i mount all clutches like in the video? 75? Maybe to much for street driving?
Yeap, it would be 75 on full throttle. But it won't be too much as the preload doesn't go over 100nm, so the car drives normally. Try it. I'm confident you'll love it.
@@RacingDiffs will do, big thanks
I got mine in too, their shipping is super fast. Hopefully I can get it installed in this week! Doing the same 30-60 for street drifting.
Hi, im now workong on the diff and is it right that i have 2 dog ear plates to much on ste stage 4 set? Also do you have an idea where i can get that small preload shim? One is broken in my original diff. Thanks ahead
That's fine. Check this link for small shims.
racingdiffs.com/collections/differential-tuning-parts/products/bmw-168mm-188mm-210mm-lsd-gear-shim-washer
Can this kit be adapted to 188mm diff for BMW E9/E3/E12 etc? This is the sideloader version. Or can at least the pressure plates be used with some clutch discs? :)
We can combine the set for your diff. Please send email to office@racingdiffs.com
Svaka cast za video.. :) Na 8:47, da li se cap steze na 14nm ili 40nm?
Hvala! 🙂 40Nm je mera stezanja srafova.
Diff porm... 🤤🤤🤤
How much is delivery to Ireland
How long would it take to receive
Delivery is 75eur via DHL Express. 3-5 days is the lead time.
@@RacingDiffs
My diff only locks well on changing direction.
But sounds smooth.
So I want to refurbish it
Do you think its nessesary to change all bearings too?
@nsheehy9953 if you don't have any sounds on acceleration and deceleration, then they can be used further. However, it would be convenient to change them once the diff is on the table. Most likely, they have never been changed... it would appreciate complete refreshment. 😄
How do I figure out my gear ratio
You can count teeth on pinion and crown gear and devide.
What stage 4 set is thw best for road racing / time Attack with slicks ?
I would go for 30/60 ramp angle with all active clutches.
Is stage 3 a drop in fit into a stock bmw m6 diff? The car is 2009 bmw m6 v10 i heard the stage 4 needs like bigger case or something but atage 3 is for stock right?
For M6 you need a totally different set. Please check the link below.
racingdiffs.com/collections/lsd-clutch-plate/products/bmw-m3-m5-m6-z4m-lsd-differential-rebuild-kit
About the multivariant set. I'm cofused. 50/65 is more aggressive or less aggressive then 30/60?
Less agressive.👍🏻
@@RacingDiffs thx for the quick reply.
What weight fluid do you reccomend running with this for track use?
Motul Gear Competition 75w140
can i modify my open diff using this kit?
No, for open diff you need to get different kit - www.racingdiffs.com/collections/lsd-conversion-sets/products/bmw-progressive-lsd-conversion-set
@@RacingDiffs would this work for my bmw z3 1997 1.9 140 hp. Or which option would work ?
@@sumeesa you have a video on the link which helps you to determine which diff type you have👍🏻
@@RacingDiffs thanks, for my model it simplay say 168. now which 168 should i pick?
@@sumeesa 168mm.
👍👏👏👏