Nice to see this you are helping us with the video and brackets, I am in need one for my Nissan D22 2003 truck it has qd32 engine and very basic torsion bar system, I want to go off-roading but not able to do so coz it’s not good heights “, please help me how can I work from your brackets, have you try making for nissan before, if it’s not possible getting from your city no problem, I will sure pay for your hard work but I need your idea to lift my truck without hurting cv, torsion bar, upper and lower control arm etc 😊 regards and respect from nepal, 🙏🏻❤️
Possibly, but I am not that familiar with the H2s. If you can send me some pictures of the LCA and shock area to atomicfandp@gmail.com we can talk about it. Thanks
I've been searching for over two months for a mod kit and read countless forums and GM spec listings. I couldn't find anything and was actually going to make my own mod kit to accommodate aftermarket coilover shocks.... Then by luck, I found this video!!! I would assume atomic coilover kit would work perfectly for the H2's and if not, out perform or even be better than the factory setup. I see that Atomic's coilover mod kit material is extremely beefy and an overkill! In comparison to the H2 factory lower mount, the bracket is only 1/8" thick. The h2's upper suspension mount, uses a single stud but it has dimples or tabs to drill out for use. The age old question alot of the H2 owners trying to figure out is, what exact model and year GM used for the H2 Suspension setup. It's really vague and alot of mixed answers from 2001-2010 GM 1500 and up to 3500 series. Im already running a beefy aftermarket 3" lower bracket. The atomic upper mount is all I need. Can you just sell the pair of upper mounts? I'm willing to experiment and chance mounting the bracket so long as it has the additional mounting holes. Then use those holes a my pilot holes if they dont merry up to the pre tabbed ones on my H2.
I was ready to throw the towel in on my 2002 Silverado. You saved the day!
Can you make brackets for 2010 duramax
Nice to see this you are helping us with the video and brackets, I am in need one for my Nissan D22 2003 truck it has qd32 engine and very basic torsion bar system, I want to go off-roading but not able to do so coz it’s not good heights “, please help me how can I work from your brackets, have you try making for nissan before, if it’s not possible getting from your city no problem, I will sure pay for your hard work but I need your idea to lift my truck without hurting cv, torsion bar, upper and lower control arm etc 😊 regards and respect from nepal, 🙏🏻❤️
I have a 2007 Ford ranger hurricane and I would like to know if any of your coilover conversation kits are compatible with its stock control arms.
I do not believe so, I have never messed with the Rangers so it would be very unlikely.
Do you make a kit that works with an 08 Hummer H2?
I am sick and tired of these torsion bars.
Possibly, but I am not that familiar with the H2s. If you can send me some pictures of the LCA and shock area to atomicfandp@gmail.com we can talk about it. Thanks
atomic178 I'll send your page a FB message
How about a 08 2500HD?
I've been searching for over two months for a mod kit and read countless forums and GM spec listings. I couldn't find anything and was actually going to make my own mod kit to accommodate aftermarket coilover shocks.... Then by luck, I found this video!!!
I would assume atomic coilover kit would work perfectly for the H2's and if not, out perform or even be better than the factory setup. I see that Atomic's coilover mod kit material is extremely beefy and an overkill! In comparison to the H2 factory lower mount, the bracket is only 1/8" thick.
The h2's upper suspension mount, uses a single stud but it has dimples or tabs to drill out for use. The age old question alot of the H2 owners trying to figure out is, what exact model and year GM used for the H2 Suspension setup. It's really vague and alot of mixed answers from 2001-2010 GM 1500 and up to 3500 series.
Im already running a beefy aftermarket 3" lower bracket. The atomic upper mount is all I need. Can you just sell the pair of upper mounts?
I'm willing to experiment and chance mounting the bracket so long as it has the additional mounting holes. Then use those holes a my pilot holes if they dont merry up to the pre tabbed ones on my H2.
U have anything for 2000 silverado ext cab already dropped 9in in the back I'm wanting to install coil overs
Yep, I make a bracket kit for stock LCA and DJM LCA 99-06 trucks also. There is a video on those brackets on my channel also. Www.atomicfp.com
Does this fit a 2008 3500? Wanting to do coilovers will buy if they do.
Or 2500
No sir, 1500s only. I would not recommend coilovers on a 3500 truck simply because of the weight.
atomic178 it’s very common for coil overs on them they make a lift just you have to mod the frame
atomic178 I’m going to email you
What coilover kit do you recommend for your brackets? I would like to get a 3"-4" drop on the front
I need a kit like this for my 99 Z71 any considerations there
Yes, I make kits for 99-06 trucks as well. See my other videos on my channel or my site, www.atomicfp.com
Do you have a kit for a 98 s10 blazer 4x4?
No sir, just 99+ GM Fullsize stuff