How To Set Up a Heli-Safe Tubing Kit | Korda Carp Fishing

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 32

  • @darrensmith7358
    @darrensmith7358 8 місяців тому +5

    Took me two hours to get three rods set up. The sleeve doesn’t slide easily over the dark matter it just keeps breaking the tube. The dark matter doesn’t push it the bottom section easily either had to drag it through with a bait needle. Used once and one kit fell apart. Good idea but needs a re think.

    • @jaims8696
      @jaims8696 5 місяців тому

      Use the safe zone sinking rig tubing works perfect 👍

  • @ing_6762
    @ing_6762 3 роки тому

    Hello! When you are the best !!! Always benefit from your products. advertise simply and from the heart to their friends !! I'd love to meet you and go fishing. my respect and recognition !! Good luck to you !!

  • @WERONEfishing
    @WERONEfishing 2 роки тому

    Love this tune awesome music 🎶🎶

  • @kennethbull5700
    @kennethbull5700 3 роки тому

    Awesome guys as ever

  • @chestersouth601
    @chestersouth601 3 роки тому +2

    How does the fish dislodge the top bead and get away from the lead core if you’ve dumped the lead?

  • @mufc20timesbitches36
    @mufc20timesbitches36 3 роки тому

    Well thought out for tubing.

  • @WERONEfishing
    @WERONEfishing 2 роки тому

    Going on both rods 12mm pop up 1 and Snowman and other easy fishing set-up lots of options

  • @clivehewitt9254
    @clivehewitt9254 3 роки тому

    Cool looks easy enough 🎣🐟

  • @mcarpcarpfishing
    @mcarpcarpfishing 3 роки тому

    Great tutorial 👍💪

  • @emilianonessi4597
    @emilianonessi4597 3 роки тому

    Sempre i numeri 1😜😜

  • @alsoknOwnAs4
    @alsoknOwnAs4 3 роки тому +3

    Couldn't you mold the tubing to the sleeve that goes inside the heli safe. To many bits plugged together in my opinion. The heli safe is wicked with just a line saver bead. Straight through

  • @maxoneson9616
    @maxoneson9616 3 роки тому

    Nice system for when you need to dump the lead around snags or thick weed but once complete with tubing a Korda lead a bit of molded putty flying back lead and a rig looking at about £10 a chuck .a nice system but too expensive to complete

  • @michaeltolton
    @michaeltolton Рік тому

    Very difficult to put the silicone tubing on dark matter, keeps breaking when pulling on I wet it and been as gentle as possible, when it is on I dare adjust the silicone tube and bead as I'm worried I'm gonna break it on the bank then I have to do a complete set up again which takes so long with that silicone tubing, defeats the object really, shame.

  • @mlwoutsidelife2236
    @mlwoutsidelife2236 3 роки тому +2

    If you dump the lead then this system is redundant as the carp will carry the whole system around… don’t dump leads, really no point..
    Think I will give this system a bash 👍🏻

  • @carpagevid
    @carpagevid 3 роки тому

    is this also realizable with a Kable Leader?

  • @fixjam7282
    @fixjam7282 8 місяців тому

    The rig tube doesnt enter in the tubing ....its too difficult !

  • @alexanderschneider6268
    @alexanderschneider6268 2 роки тому

    Kann man mit dem Heli Safe auch werfen

  • @cw2126
    @cw2126 3 роки тому +1

    Team Ali 🔥🔥🔥

  • @stark902211
    @stark902211 3 роки тому +2

    really struggled to get my dark matter tubing through the kit, even tried another tubing kit as i bought 2 sets and both were really difficult , it definitely didnt slide on like that did. but once on its a really good set up to get over leader bans

    • @jacko4605
      @jacko4605 2 роки тому

      I had the same problem mate even with saliva you will break the tubing before it even slides on

    • @Samuelmeigh
      @Samuelmeigh 2 роки тому

      Stick a splicing needle through the tube, the pierce your tubing with it and pull back through, then chop off the end of the tubing where you’ve pierced it. Thank me later 👌🏼

    • @Zombie-fb5zf
      @Zombie-fb5zf Рік тому

      Totally agree korda needs to sort this out none of it fits on the dark matter tubing 👎🏻👎🏻👎🏻

    • @Hesher42
      @Hesher42 4 місяці тому

      A little late to the party here but…
      This works far better with ESP tubing (Sorry Korda) I just can’t get the sleeve over the dark matter tubing without ruining it.
      I also threaded the line through before putting the hat on the tubing because it will never ever thread through once it’s through the tubing…

    • @lonewolfcarper90
      @lonewolfcarper90 3 місяці тому

      Try the dark matter nano tubing ( if your mainline is thinking enough )

  • @adambessey30
    @adambessey30 3 роки тому +3

    Not a fan of dumping leads in the lake can't be good for the fish and in a few years all you will be fishing over will be old lost leads

    • @tjoelker_2026
      @tjoelker_2026 3 роки тому

      No response from korda. All they think is money by selling more leads

  • @Markusgebvor
    @Markusgebvor 3 роки тому

    Sorry, but this seems to fiddly 😂. I can go with your heli safes and fish em naked with a thick mainline or I am going with leadcore. But this, it’ll take 24 hours and Liam Neeson to tie this rig 😂

  • @silky162
    @silky162 3 роки тому

    These videos are good but instead of the writing at the bottom can you have someone talking instead please.

  • @Zombie-fb5zf
    @Zombie-fb5zf Рік тому

    Korda what is going on silicone tubing does not move freely up the dark matter tubing trued olive oil silicone spray etc just breaks the dark mater tungsten tubing👎🏻👎🏻👎🏻👎🏻 would like a refund