Power steering fluid flush, without pump in less than 10 minuets/Power steering fluid change
Вставка
- Опубліковано 22 січ 2022
- Watch detailed video: • Power steering fluid f...
In this video i will do a Power steering fluid flush, without pump in less than 10 minuets
Flushing power steering fluid and eliminate power steering pump noise. this video will show you complete power steering flush of the system step by step...
Procedure
..Jack the car up to make the job easy and open the hood, locate the power steering reservoir and open the cap, suck the old fluid out by oil suction pump as I did or use Turkey baster
..Remove the hoses claps of the reservoir hoses and take it out to clean it with carb cleaner (if necessary)
Taking the old fluid out with a turky baster and add new fluid and steer the wheel lock to lock
it will suction new fluid from resivior and discharge old fluid from outlet(small hose) that one goes in to the cola bottl
...Do this method few times, till you see new fluid comes out from the small diameter hose,
...Connect the discharge hose to the reservoir and add fluid if necessary
... Turn the engine on and turn the wheel lock to lock to come out any bubble in the system(if there is any) and add fluid if necessary
...Lower the jack and Take the car for a 10 minutes drive - Авто та транспорт
Watch detailed video here
ua-cam.com/video/jHoFcAlGs0I/v-deo.html
“Video unavailable” ??
@@cslack813same
This video just saved my ass. Wife has been putting coolant in the power steering reservoir.🤬 and I have no pump or vacuum. With no money😂... didn't even think of this. Your brilliant! My man, thank you!
lol thanks man, here is the detailed video ua-cam.com/video/jHoFcAlGs0I/v-deo.html
I guess the steering wheel symbol or actual “POWER STEERING FLUID” label must have been a mistake when making the car to you?
Damn thing is too dirty to read I guess, plus no steering wheel symbol. And what were you trying to say at the end?
@@bobbyhandley5581 as in the thing has a symbol on it & words
@@cslack813 do you know what your talking about lmao reread your first comment and tell me if the end makes sense..
Pfft. My pump auto flushes the oil slowly every couple months 😏
Lmaooooooo someone responding to this comment seriously in a about 3…2….1
My crankcase does the same thing. Replace filter every 3k miles, oil hasn't been in there for 1000.
@@heytasker you’ll never have an oil related failure. New oil all the time
Hahaha
@@Sharrieff93 I'm still waiting for it lol
Looks like he used the correct fluid. A bunch of Toyotas don't use power steering fluid rather transmission fluid.
Pretty much any Toyota built after 2000 uses power steering fluid
what fluid did he use? ive never replaced power steering fluid and im trying to figure out what fluid i need to use on my 2010 Lexus ES 350
@@hyypersonicautomatic transmission fluid is what he used for steering
@@stillhere7193you can use either or, at the end of the day they’re both hydraulic fluid, atf is just dyed amber/red
@@freepalestina48Noooo, you can definitely use PS fluid for pumps requiring ATF, but not the other way around. The additive and chemical packages on the different fluids are entirely different. You’ll deteriorate the pump seals and lines over time, and possible the pump gears itself.
Use EXACTLY what your car’s manual states. And always remember, ATF is NOT backwards compatible for power steering, but PS fluid is.
On my 2009 Honda CRV (I bought it new in 2009), I had a soft humming noise from the Power Steering pump. The car had 105,000 miles, and I flushed the PS system similar to what’s shown here, and the soft humming noise disappeared. It took about 1 1/2 hours to do. It took 2 of us and I used Honda PS fluid, 8 bottles. You keep flushing till the fluid comes out clean. Thanks …Jim
PS: No aftermarket PS fluid, nor automatic transmission fluid either. If you use any of these fluids on a Honda, you might as well not do it. Eventually you will replace the PS pump. My car now has about 130,000 miles and the PS pump is working perfectly, and with no noise.
Yes, people seem to not realize that Honda/Acura specifically designs their PS pumps and seals uniquely. You’ll see the good PS fluid bottles always stating what make car they are for. Sometimes, you’ll find that it will tell you if the fluid is FOR or NOT FOR Honda/Acura power steering.
However, it depends on the car. Most universal Asian PS fluids are okay. Some Honda/Acura PS fluid is made for Honda’s up to 2005, and there is supposedly a newer formula for cars 2007+, which is backwards compatible, but not the other way around (older fluid on newer cars).
Hey, I HAVE to comment on this one. If you choose to do it this way and use a solvent, like brakleen, to clean out the inside of the reservoir, make sure the solvent you sprayed inside is completely dry and empty before refilling. If not, the remaining solvent can "thin out" your power steering fluid and cause a premature failure.
Not just that but if the brakleen is the OG chlorinated one, don't use it on plastics. Another good solvent for doing the cleaning is denatured alcohol; but as you previously stated, make sure the container is dry.
Brake cleaner tends to dry plastic reservoirs and leads to weakening the plastic. I used purple degreaser and boiling hot water and spray the degreaser from the suction outlet and release the garbage at the bottom. Once every 30,000 miles is sufficient to keep your pump and rack and pinion healthy.
Water is the one I was told by my dad and when he show me I was shock how clean and new the reservoir look 👀
Excellent job, love it.
Thanks
Will take more than ten minutes for sure. Takes ten minutes just to get the tools out.
Just did my moms Toyota and it was weird to me that Toyota uses transmission fluid for the power steering.
They're really the same thing - hydraulic fluid with detergents. Just don't put power steering fluid into the transmission.
Toyota is not the only one. Ford uses mercon v for a lot of power steering fluids and other manufacturers use atf too.
@@HSS712So not really the same thing 😆
I did it in the same way on my Jetta 6 2012, but I also started the engine for a few seconds to activate the steering pump and change the oil there too
If the pump is in series with the lines at the reservoir then the pump is getting flushed the way he demonstrates.
I just did this to my Lexus, and the power steering noise is totally gone. Thank you.
I do it a similar way in my old 2003 Honda Odyssey. I hook up the return line using a brass barb coupling and two clamps to a long clear hose (so I can see it) and it empties into a container on the ground, whilst I get a 2nd person to start the car and turn the wheel for me, I already opened like 4 bottles of Honda PS fluid into one larger bottle for speed, they turn it on and start moving the wheel from lock to lock while I feed the reservoir. You have to be fast, that pump works at some serious pressure, you can go empty on the reservoir real fast, when I yell STOP they turn the car off. Just another way to do it.
Is the power steering system as sensitive about air bubbles as brake fluid is?
@@selwyn13 No, not at all. It's a small system compared to the brake system. In my case, the Odyssey takes only 2 or 3 bottles of that Honda PS fluid. I thought it would take more. While you're doing it this way, if you accidentally let the reservoir go dry because the pump pumps so fast, it'll start to squeal because it's sucking in air but as soon as you put fluid back in it sucks it right up and the air is ejected from the system.
So how do u identify which hose is the input and output line?
Auto repair place says I have power steering
leak, however, I see no loss of fluid in steering container
If I flush my power steering fluid - and still have a leak to repair. Will they have to flush again with the replacement of pump, etc.??
Thanks Sandy
My hands don’t work very well these days. I’d love to be able to do that myself. My 2004 Tundra v8 been leaking and squeaking for few years now. She only has 281,000 miles on her. Best truck ever.
Hey chris where ya located
What about electro- hydraulic reservoirs with only one tube attached to it?
What did you spray in the reservoir to clean it, brake clean?
I'm saving this video 👍
Done this way a few times. Simple...
Got to keep all fluids fresh.
Which brand of oil you used
Big like. Great idea
thanks
@@AliMECH
@@AliMECHhow many quarts of atf did you need for this?
What kind of cleaner did you use to clean the reservoir
If there is a filter in reservoir, CHANGE IT! It's cheap. You have to change it just like any other filter.
You have to buy a new reservoir. The screen in the reservoir is not replaceable. I dont know any brand that has a replaceable power steering fluid filter🤦♂️
@@matthewmorrone883 I meant that you have to change reservoir ;)
In some instances, I agree! It can be easily cleaned from the suction hose end….
If There is...Its Cheap....???
Sit back down in your Barco Lounger.....
Watch something else.....
You don't know PSF from Shinola....
Nice work ☺️👍
Thanks 🙏✌
Спасибо , коротко и ясно
What is the spray you used to clean that out with?
Most likely brake cleaner.
I love you bro. Knowledge ain’t free
I'm no pro, I just work on my cars but i must ask, Was the new fluid going into the coke bottle? You put it on the hose leading away from the reservoir as opposed to leading to the reservoir, the return line..i would think the return line would be best place right?
Perfect~!
very professional👍
Thank you 👍
ນວວຮວຈລໃນເຂດ
I now see how I need to do mine to get it clean and changed.
Thank you for educating us.
Any time!
What did you use to spray out the container?
Great job
Nice! Doing mines tomorrow
Which one Do the hose go toward the pump and feedback?
Wow!Great Video
Master Class!Take Care.
Лучший очиститель кола- кока?
Did engine run when you do flush?
2.4 & 2.5 on electric power steering is beautiful. Is that hydraulic transmission fluid? What is Toyota recommending?
Is good to learn thanks 👍
Good Work
Thanks
So which hose went in the bottle the larger lower hose?
La purga del fluido se hace con el motor apagado?
I may need a new reservoir and high pressure line due to age (2007) and obvious lack of routine cleaning.
At what year/milage should you replace the power steering pump? My 06 acura TL has 174k... the guy i purchased it from used the wrong kind of power steering fluid so it had the whinning noise. I flushed the res 3 times fully adter changing to tien coilovers, replacing front tie rods (bushesing were blown out) i put the upper camber kit and rear upper camber kit on and have decided to wait till after my alignment to see if i need ream toe arms. But the power steering noise is gone. Ive got lots of videos to edit and post up. But im waiting to see the outcome of the alignment.
Replace the pump when it starts to whine...
change the fluid every 50,000 miles if you are lazy or cheap....
Hondas are built to last especially late 90's early 2000's...want proof? Goto a junk yard and check out the picked to the bone Honda's....
They will have at least 200,000 miles....
Then check out Chevys, Fords and Chryslers....
Is that red power steering fluid or ATF to clean things out?
Thank you for the excellent video
You are welcome!
Is that an engine mount on the cilinder head?
Excellent thanks👍💯💯💯💯been wanting to do it👌
Thanks, glad it was helpful, longer video on my channel where i explain everything
@@AliMECH excellent
Goog idea for soda bottle
Most places won't do that but they will say they did
Спасибо за видео инструкцию👍
Excelente
Ш32
What is the fluid been sprayed into the reservoir to clean it
Does this work with a electronic power steering pump ?
Thank you.
You're welcome!
What are you spraying in there?
Why is the fluid shaking when the car is on is that normal or is it supposed to stay still?
Thank you for doing it right
Thanks ✌️
Same resevoir bottle as my 1992 Celica.
Toyota efficiency.
Nice man🤙
🙏🙏
What spray did u use?
Brake clean
What about the stuff in the other hose
Very helpful short video...thankss
Thanks for watching
Question ..if you remove the hose dont u create air bubbles? Why not not rem9ve the hose and do it w su ctioning instead of removing hose?
That's nice and all but what if my power steering and the master cylinder are one assembly? I'm not taking apart the master cylinder just to take off the reservoir
Nice, now you have to fix that starter.
Not the starter is the vvti cam gear rattling on start up
Majestoso, magnífico! Perfect.
Раз в год менять частично и проблем с рейкой не будет. Еще без прокачки, а частичной заменой можно менять тормозуху
Love them TOYOTAS because they’ll last 50 plus years miles are unlimited. I am driving a 2007 FJ with 321,000 miles daily leaks no fluids of any kind.
Love that broken ‘new’ looking engine mount
Even new ones can do that, OEM included. Annoying? Absolutely.
camry 40,если не ошибаюсь.... Спасибо, сохранил.
2011
Thank you! 😊
Welcome!
What the heck was that right at the end of the video that blew?
Merci Monsieur vous ête un génie
Gracias
Wow nice work bro
Thanks
My oil hasn’t been changed for a long time
Can i use some degreaser to fill the reservoir to clean all the pipes and things and then fill with the oil?
Oil or power steering fluid?
How do i make the grink bottle thingy with the skinny tube at the start of rhe video?!
wow fantastic 👍👍👍👍
Thanks
This service is 70 bucks at my shop. I avoid selling it on older cars that have never had the fluid exchanged. It ends up making things worse half the time. If you change the fluid regularly it does prolong the life of the pump and rack tho. Good vid anyways.
In your experience how long is the life of a rack ?
Truck seemed to take a bit to start. Mine starts in 1/10 that time. Soon as key hits ING maybe it's because I have 0ga cables alternator to battery to starter or the 850cca AGM. Maybe the 1100cca ultracapacitor....
What did you spray in there to clean it out all the way?
carb cleaner
That’s the easy part,getting to everything to clean it is the hard part!
What was happening in the beginning with the soda bottle....how was he removing existing oil?
@AliMech yo. I have 1⁹⁹⁹ Dodge Ram 1500 3.9L. I topped off the gas and headed out. 6minutes later the truck shuts off and I pull over. I tried to crank it back up but it would turn over but not start. So im thinking heat soak issue. I banged on the gastank olarter cycling the ignition 3 times b4 starting it. It started up and I thought I was good to go. Nope. The truck wouldn't respond to me pressing the gas. I repeated this process over and over every 15minor so. It would start up and idle. As long as I was banging in the Gass tank, it would continue to idle. I am no mechanic but I'm learning. I hear the The feul pump engaging when I turn the key. The oil was low but the truck was treated with Lucas Oil and transmission fluid. The closest town is 15min from me. I have to get my truck running. I start a new job next week. Any thoughts would be great 👍. Love your channel btw.
How does he drain the fluid from the reservoir to empty it in the beginning?????
Good work
Thanks
Ive done it similar with a bucket of fluid and a hose into waste, start car till it comes out clean.
هاذا الشغل ماشاءالله تبارك الله تمام 👍🏻 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
شكراا
AZR?
Hola, tienes vídeo en tu canal?
What did you spray to clean it?
carb cleaner
What toyota is that.
new subscribed thx
Thanks 🙏🙏
Just use an old soap or shampoo bottle pump. Every oil change pump out the reservoir and refill it. Much easier and it will keep the fluid fresh.
Thanks. I will be doing that from now on
Good idea, thanks for suggestion
Well, I wasted 4 bottles of PSF and the fluid in the reservoir is still dirty and dark😆
@@chebrets I did it this way using a liter of psf. Fluid looks perfectly clean now.
Falto decir que había que subir el auto antes de mover el volante para no lastimar la estría de la dirección.
Impressive👍.
Harbor freight pump does the same thing..5 bucks with coupon.. you won't have to disconnect anything