EVA Foam Cosplay Sword Tutorial (She-Ra)
Вставка
- Опубліковано 1 жов 2024
- How to make swords out of EVA foam
The pattern set for this costume is available here : kinpatsucospla...
Learn how to make cosplay costumes and armor with our step by step cosplay tutorial books and videos available in our store!
----- www.kinpatsuco...
For monthly cosplay tutorials and prints become a patron!
/ kinpatsucosplay
For more of my work follow me on:
/ kinpatsucosplay
/ kinpatsucosplay
/ kinpatsucosplay
/ kinpatsucosplay
Video edited by Eric Solomon - / faceless_eric
I was so exhausted from making my Shera costume for this year's Con that I was almost gonna go sword-less. But then I saw your video and thought to myself, I can't NOT do this! THANK YOU! THANK YOU! THANK YOU!
When she had finished sanding and the sword was all black and smooth I thought it looks so cool
✨corrupted She-ra✨
This is so beginner friendly! Thank you so much for this
I have just one thing to say...
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Can I ask how long the sword is when completed? Just curious!
Phoebe Svoboda Should end up being a meter long
wow this is amazing! I once tried making Luxanna Crownguard's staff but it didn't work out. I think this video helped me understand how to support and structure a prop better and the clay foam looks amazing! I'll definitely take a crack at it again. Love your builds!
The carving part is so satisfying
It really is😭😭 my lines are pretty jagged but it's ok cuz I'm still proud of how its turning out
I’m here to make Raganrok for my Crona cosplay, it already looks like so much work 😩🤚
Thank you SO MUCH. I am working on a SW blaster and this was extremely helpful.
Im doing a She-Ra cosplay in a few days, and OH. MY. GOD. This helped me so much thank you!!
Oh, how I miss my old school She-Ra. A terrible confession: As a little gay boy in the mid-80's, I stole a She-Ra costume from the girl next door and kept it in a hiding place for those moments I thought I was alone enough to pull it out and be as fabulous as the Princess of Power.
Amazing build! Which type of gold airbrush paint did you use, it's beautiful!
I use the createx wicked gold :3 I love the nice yellow colour it has ❤️
@@KinpatsuCosplay if you dont already, would you be willing to make an airbrush tutorial video? I also use Createx airbrush colors (Pearlized) and from how it looks, I seem to have same type of compressor as well.. as for airbrush model or quality, I got a really cheap Gravity feed one, but... for whatever reason ,I always have a tough time getting my paint to flow. I eventually get it *kind of* right after a while (sometimes hours) of adding water, unjamming it, reassembling, etc.. but I never quite know what I'm doing wrong.
@@NikkeiZX The gold createx never sprays smoothy for me. It jams mine too all the time. Its just the thick metalic flakes getting stuck in the machine.
@@KinpatsuCosplay That is an awesome replica of She-Ra's sword from "She-Ra and the Princesses of Power"!
How do you get 2 cm high density EVA foam I just about non existent
it's like two 10mm sheets. I thought the same thing and asked siri lol
Hello, i'm curious, can this tutorial be applied to any type of sword? Because, if i want to remake the one of Tryndamere, does that work ?
In all honesty, the idea is a solid one. All you would need to do is change the pattern for the sword.
Thank you so much! I'm planning on dressing up as Adora for Halloween, this is perfect!
Hi UA-cam. I'm looking for some information as to how durable these foam swords are. I'm a therapist interested in helping a student create something similar but the sword may be played with in pretend sword fights. Any advice on making EVA foam more durable for moderate use?
Where can I download the blueprint patterns?
Can me and my mom pay you to make us a sword?
Amazing tutorial ! One question, where did you get your eva foam?
Oh and do you use the 45 or the 100kg/m3 one?
Awesome!! I've been waiting for this! So helpful! ❤❤❤
Plastidip works better than PVA glue and takes less layers
This depends on what kind of finish you are going for :3 plastidip is great for very flexible durable items but you will never get a completely smooth finish and it often leaves a texture and can be hard to work with. Pva glue on the other hand does crack on items that get stressed a lot but we get a completely smooth plastic/metal finish with it as compared to plastidip :) so it's about personal preference and what kind of finish /purpose you are making a build for.
Very I formative. Thank you
i’m thinking about making anaklusmos from percy jackson. it might be a little ambitious considering it’s a thinner sword but i think i can do it. this is gonna help me a lot
I know they are a bit pricey, but has anyone used something like a Fein Multimaster or other oscillating tool on foam?
They have blades and sanding heads with different profiles and might save some time and effort.
I have been waiting for this video, so glad it’s finally here!!!!❤️❤️❤️
Awesome! This is just what I needed
Not having a hand sander makes this harder 😖😵
Beautiful work. Could you use a hot wire foam cutter for the beveled edge as another option?
It's so amazing! I love it! Honestly, I had to check the comments to see if any pervs talked about seeing down your shirt. So far so good. XD
Uaggajcjxh
Eu já assisti a série da (She-ra) todinha, ela até fica com a Felina .^-^
Where in the world do you buy 2cm thick EVA foam pieces like this? I've looked everywhere but can only find pieces up to 10mm thick.
Amazing
How thick does the foam have to be
how does the back look, do I just not show the back?
What brand did you get your foam from? Im making a Kirby Ultra Sword and its my first time working with Eva foam. I just wanna make sure I buy a product that will actually work. Any suggestions?
For me, a men, it looks like a crafting with a real metal will be much easier XD Anyway good video
I’m subbed and I’ve only seen one vid lol
Esta muy linda, felicitaciones.
Neat build!
What do you like about wood glue as opposed to something like plastidip for sealing your foam? And do you use an enamel top coat or a clear impact resistant resin to increase the luster and protect your final paint job? What are your thoughts on vacuformed plastic or fiberglass resin shells for big fantasy weapon builds?
Plastidip can be lumpy and you dont get as smooth a texture as with woodglue. But its all personal preference. I dont use anything on top of it either just clear spraypaint.
where do you find 20 mm eva foam?
Dude I love your builds 😱
This video is very helpful thank you again :)
where do you get your foam from?
Where can I get this pattern?? I don’t know with all the measurements and stuff
Nice video btw, this really helps!!
Any idea where to get eva foam?
this is gonna help me in making props for a musical production! Thank you so much!
how to make it look sharper?
Where do I find the blueprints?! Anybody? 🥺
4:23 I see what you did there 😉
rather have plastic than foam. foam is good for little kids but plastic is way better for cosplay. I do cardboard versions held together by hot glue from the rear then you can vacuum form over the top of it. using that vacuum form you layer fiberglass mesh with glue inside of it to give it strength, you then merge the 2 sides together by using small strips of the fiberglass mesh and glue to join the 2 halves, trim the edges. spray paint the outside to add details, clear coat with a good acrylic clear spray... done.
What grit(s) of sandpaper do you recommend for use on EVA foam? I happen to have an electric sander and dont want to have too rough of a sandpaper that ruins the foam.
Does anyone know where you can buy the foam she used? All the ones I find are too thin :(
Does anyone know where I can find a good template?
Would a heir dryer work when using the contact glue to stick them together just wondering
what grain(?) of sand paper do you recommend ?
Does any one have a list of everything she used in this video?
do you need a mask when doing air brush painting?
So cool well done
what is the model of your sander?
Any suggestions on what grit to use for the hand sander?
could i hand sand the edges if i don’t have a hand sander?
BEAUTIFUL!! I’m building my own sword right now actually!
where can I find the sword u got on paper?
Which model of sander machine are you using?
Can you please do zangetsu from bleach
how hard is it, or is it soft like foam?
I love this and i might make something like this if thats ok
Thank you so much for your video!
This is an awesome guide thank you!
For next time I would use Plasti dip
Ok now break this one and make the new sword
Where did you buy the wood glue?
You're amazing 😍
Keep up the great work!
Where can I find the template?
This video is a blessings
Eperaba ver la espada original.
I love she-ra
can i spray paint it with regular sprays?
What glue you used to prime de EVAfoam? I didnt understand whst wss the name :/
Jose Carlos Guerra Corzo “PVA wood glue.” it’s like glue for wood
Good work good work :p
Laser cutter?
Such a great vid, one question, instead of a heat gun, can i use a hair dryer?
Yes, but it would take longer to use :)
Awesome job 😊😊
So cool! Great Job!
Great work
Wow! Cool.
It's amasing! 😍❤️
What kind of foam did you use? Where you can find/buy it?
Love 😍
wow what a talent u have!! i ll try my daughter wants so bad a she ra sworn. awesome tutorial
God bless, and Jesus loves everyone! God sent his Son to die on the cross for us all to save us all from our sins! We have all sinned. :( 😞 😓 He saved us! Hallelujah! Praise his name, for he is the greatest! Check out John 3:16 in the Holy Bible! ❤️🙏✝️💖👑 I love you, Jesus Christ, our Lord and Savior! I love you God!
If I paint the EVA foam (black) with paint acrylic, when I finished it, will see like if was painted with a spray o not? what do you recommend to me?
Why don't you use fomex platform to make sword , it strong and hard than EVA
Is there a replacement to foam clay? I don't have that to fill the little mistakes :[
God bless you and Jesus loves you! ❤️🙏✝️💖👑
I need me sum tools hehe I really wanna cosplay a certain claymore character ^3^
Can u pls make a peachette costplay outfit?! Plssss
wow,amazing! (Anyone else Brazilian?)
omg i love yours videos!! kiss fron Colombia!!
One cartoon that should have never been made