Possibly one of the best compliments payed to Louis Rossman is to have you, an already proven very skilled and competent tech, refer to his guides. I just wish all techs (in all areas of expertise) were this honest.
I learned a ton in this video... I think it finally all makes sense now... my problem is confidence. I have not had a rescue yet of a logic board, so I send them off. one day
We are expecting the microscope shipment by Jan 10-15. NF.Short is in stock. northridgefix.com/product/power-supply-short-injection-detector-with-voltage-and-current-control/
Well done, that repair wiki certainly helped. Probably an illusion, the large ceramic cap in the middle at 0:52, bottom at 1:12, appears to be cracked.
If it was cracked laptop wouldnt work. It isnt cracked just look a bit better and you are going to see that the cap is okay it just has what i assume is hair on it
Excellent work Alex, including your etched better than factory stamp :) This issue of popping caps is still there in the next gen Macbook air as well. Can be a bad design or bad lot of caps.. Keep up your good work as always!
for shielding stuff, you don't want to melt or burn, I've seen people use kapton tape. is that a viable option or is there a reason we should not be using that? curious for my own purposes. quick follow up, what were you soaking the flux up with at the end there?
It may be fun when big boss takes us through his process and the later be like Let me give the board to Alex to fix and I will be back to finish the assembly haha 😂
A few years ago, If anyone told me I'd be addicted to watching an electronics repair channel I would've thought they were crazy. And yet, here we are, lol.
which hot air station would you recommend? the best 863 or the atten st-862d is the best one worth 30 euro extra? it has more wattage, but i also don't know the brands if they're known for quality or whatever. i was planning on just trying some microsoldering and thought i'd buy decent equipment in stead of going through unnecesary frustration with cheaper equipment.
Really amazing video Sir. I have a question, what program do you use to read schematic and layouts, and how to get the schematics and layouts for the laptops?
You made me fall in love with Flux (yes flux) your best friend ! it will always be their so apply it generous ! their can NEVER be enough Flux ! pop pop ..pop ohhh no!! a capacitor popped ! help me NRF
What's the general sort of cost for a repair like this? Sadly Apple have most of us convinced that a dead board is a new machine in terms of cost prices.
Haha 😂 that’s absolutely true, I had to spoil more than 5 motherboards of different Apple devices until I learnt how to fix what they say it’s unfixable from Apple
@@Dheazzo Rewarding for sure :). It is something I considered doing myself. I was one of those kids that would take apart things like the family PC back in the 90s, with no clue on how to put it back together so this field does interest me ;).
@@CLIPZZ345 Oof, that's a sting. I guess the whole replacement thing works better for Apple and the perceived customer experience due to not having a device whilst it's in for repair, etc. What do you think would be a fair, but also worthwhile charge that someone like NorthFix or good old Louis Rossman to charge for this, or even if the guys can answer themselves. I'd be really interested @rossmangroup and @NorthridgeFix
The existence of a "Better than Factory" stamping would be: The user would never see or appreciate the stamp, as he would have to disassemble his rig in order to see it! Only a follow up repair tech would have the "honor and privilege" of witnessing a NorthridgeFix "Better than Factory" stamp.
Hai Saya memiliki iMac akhir tahun 2013 dengan seri logic board 820-3588-A , yang tidak menyala / booting. Saya cek PSU keluar daya 12Volt Setelah saya cek membuka sedikit layar, lalu saya tancapkan kabel listirk tanpa menekan tombol on di belakang. Terlihat 3 led nyala semua, kipas berputar dan hardisk terasa bekerja, Tapi tidak bisa booting dan tidak terdengar bunyi lonceng, apakah bisa di bantu,
Possibly one of the best compliments payed to Louis Rossman is to have you, an already proven very skilled and competent tech, refer to his guides.
I just wish all techs (in all areas of expertise) were this honest.
Luis rosmman is a hero of this repir industry. He help me a lot to repair devices ❤
When Alex smiles like that after doing an amazing job, you feel a boost in your own confidence also. Keep up the good job Alex.
Thank you for pointing us to the repair wiki. 😊😊😊
amazing job 👌👌thx Louis Rossmann , Alex and Big Boss
Low melt solder reduces the chance of heat damage to the doner component when it's removed.
Thanks for the video Alex.
The Big Boss Nominated you as a king .congratulations Alex 🎉.
Great to see people (knowing about and ) using Louis's great work. Nice.
I loved the idea of having a "Better Than Factory Stamp" on every repaired board
I learned a ton in this video... I think it finally all makes sense now... my problem is confidence. I have not had a rescue yet of a logic board, so I send them off. one day
والله ملك يا خال. Great job 👍
A job well done as always... Love from Pakistan.
Alex's smile gives us all hope !!!
Alex I love your smile so keep on smiling and spread your knowledge to others God bless you bro ❤❤❤❤❤❤
i thought this going to be just replacing a burnt component. good job sharing Rossman's site.
Learning about Wiki Repair was a very valuable piece of information. Thank you!
Awwww big boss said to alex you are the king god bless him 🥰🥰
Yes definitely get the stamp! It's your trademark.. Good work!
Like a surgeon , steady hands !
i keep the playlist running, and i miss many likes, best of all, thanks for sharing
this guy is so awesome, i bet he can repair my broken heart
I'm addicted to these videos. They're like yoga to me.
Any idea when your microscope will be back in stock?
The voltage injector is out of stock as well.
We are expecting the microscope shipment by Jan 10-15. NF.Short is in stock. northridgefix.com/product/power-supply-short-injection-detector-with-voltage-and-current-control/
Well done, that repair wiki certainly helped. Probably an illusion, the large ceramic cap in the middle at 0:52, bottom at 1:12, appears to be cracked.
If it was cracked laptop wouldnt work. It isnt cracked just look a bit better and you are going to see that the cap is okay it just has what i assume is hair on it
I love all of your content, and how much effort you always put into your work. Thank you for all the videos you post and for always keeping it real.
Thank you for the very very nice inspiration my friend 🙂
For components with 2 pads we usually use a solder tweezer from JBC. No surrounding parts will be damaged!
JBC is at another level. Other devices even Professional ones look like a toy in comparing with JBC
As an electrician my first guess would be a capacitor, followed by a fuse.
It sounds obvious but it isn't ! this is years of experience ! followed by a fuse (WOW) 😮that's amazing
As a fellow sparky, id go the fuse then the capacitor. Either way its a quick check.
I learned many things from u in soldering.. Excellent💯
Alex is the Captain of all Caps😁
Excellent work Alex, including your etched better than factory stamp :) This issue of popping caps is still there in the next gen Macbook air as well. Can be a bad design or bad lot of caps.. Keep up your good work as always!
بالفعل انك ملك يا علي
you are good better than factory PETER FROM WYOMING AUSTRALIA
Good job mate 👍
he left the big boss with the hard job, of reassembling the macbook air lol, nice repair as always
what were your heat settings for the hot air in order to remove the capacitor?
Thank you Alex.
Happy Christmas 🎉🎉🎉
Where did you get the board view and schematics?
badge of honor 🤣, Amazing Work as always. Thanks for sharing your knowledge
Love this stuff 🙂
for shielding stuff, you don't want to melt or burn, I've seen people use kapton tape. is that a viable option or is there a reason we should not be using that? curious for my own purposes.
quick follow up, what were you soaking the flux up with at the end there?
Where do you get the board view diagramm ?
He gives free training all the time. He is never selfish. Cut the Prozac in half next time.
Excellent work. (Of course, it's hard to expect anything less....)
Your the king , boss ❤️
All the best for the new year m8
Which schematic software u use
It may be fun when big boss takes us through his process and the later be like Let me give the board to Alex to fix and I will be back to finish the assembly haha 😂
A few years ago, If anyone told me I'd be addicted to watching an electronics repair channel I would've thought they were crazy. And yet, here we are, lol.
ملك يا خال ملك 💪😁
Good job. 😊😊
which hot air station would you recommend? the best 863 or the atten st-862d is the best one worth 30 euro extra? it has more wattage, but i also don't know the brands if they're known for quality or whatever.
i was planning on just trying some microsoldering and thought i'd buy decent equipment in stead of going through unnecesary frustration with cheaper equipment.
Great vid Alex. You don't need to collab in the repair wiki, your videos are far better than any text description.
People pay money for it, what are you talking about😂😂
best sales man
Nice of Rossman to do this.
Awesome job
Really amazing video Sir. I have a question, what program do you use to read schematic and layouts, and how to get the schematics and layouts for the laptops?
Thinking the same... they seem like a extremely helpful tool
Probably either OpenBoardView or FlexBoardView
Once you have the board file me personally I use the software ware called BOARD VIEW
The better than factory sticker needs to have Big Bosses face on them too :)
ملك 👑
Did You move a new building?
KAPTON tape is handy for protecting heat sensitive parts like plastic connectors.
Great job
Love this!
Where can I get the hot tweezer that you use?
Log onto their website. They almost always ship out the same day😂
😂@@raindeergames6104
Great job Alex!
+1 for a second channel of BigBoss. ;-)
You made me fall in love with Flux (yes flux) your best friend ! it will always be their so apply it generous ! their can NEVER be enough Flux ! pop pop ..pop ohhh no!! a capacitor popped ! help me NRF
Do you ever have issues using second hand components from donor boards? Why not use new components?
I am wondering where a person can learn these repair skills?.. and what is the name of the specific study?
What's the general sort of cost for a repair like this? Sadly Apple have most of us convinced that a dead board is a new machine in terms of cost prices.
Haha 😂 that’s absolutely true, I had to spoil more than 5 motherboards of different Apple devices until I learnt how to fix what they say it’s unfixable from Apple
Generally speaking a motherboard replacement from Apple would be around £700-1000 depending on model.
@@Dheazzo Rewarding for sure :). It is something I considered doing myself. I was one of those kids that would take apart things like the family PC back in the 90s, with no clue on how to put it back together so this field does interest me ;).
@@CLIPZZ345 Oof, that's a sting. I guess the whole replacement thing works better for Apple and the perceived customer experience due to not having a device whilst it's in for repair, etc.
What do you think would be a fair, but also worthwhile charge that someone like NorthFix or good old Louis Rossman to charge for this, or even if the guys can answer themselves. I'd be really interested @rossmangroup and @NorthridgeFix
The existence of a "Better than Factory" stamping would be: The user would never see or appreciate the stamp, as he would have to disassemble his rig in order to see it!
Only a follow up repair tech would have the "honor and privilege" of witnessing a NorthridgeFix "Better than Factory" stamp.
assalam alaykom
What type of the multimetre please
Hai Saya memiliki iMac akhir tahun 2013 dengan seri logic board 820-3588-A , yang tidak menyala / booting. Saya cek PSU keluar daya 12Volt
Setelah saya cek membuka sedikit layar, lalu saya tancapkan kabel listirk tanpa menekan tombol on di belakang. Terlihat 3 led nyala semua, kipas berputar dan hardisk terasa bekerja,
Tapi tidak bisa booting dan tidak terdengar bunyi lonceng, apakah bisa di bantu,
y fan wasnt working?
Awesome ✌🏻✌🏻✌🏻
amazing
my favorite word of the year
the short is gone
If your are 'almost 99% positive that that is the faulty component', does that mean you are 98.8% positive and if so, how do you get so precise?
I would buy NF dot STAMP 😆👍
Say hello to the bad guy that should be on your merch.
ps @NorthRidgeFix - Let Big Boss know that I have that SAME jacket. It's a good jacket! :)
customer now have very special motherbord 😂😂👍👍
There is "главная" tab in boardview. It's in Russian.
Looks like we got an Air fryer😂
Ahh the good ol’ tantrumulm capacitor strikes again.
ملك ياخال ملك
👌👌👍👍
but there is no fan spin....
18:19 - Aha, so this is the fabled "wireless heatpipe" cooling solution by Apple - think different! :P
I wonder what is this fan blowing at. :)
❤
Thnks v mitch.pleas put traductions with vedeo
Happiness.
BiG BOSS 😅
Why reinvent the wheel - Correct it's visual inspecting
wow
The most boring part about doing this repair is the disassembly and reassembly, it takes longer than replacing the one faulty component.
One man's boring job is another man's dream job. Big boss loves it.
yes its boring.
Especially Apple's devices, are a real pain to disassemble.
My mother used to say "if you are bored, you are boring".
🙏👏👏👏🙏
maybe just BTF stamp..
1932 it lasted a LONG time, owner must be really old.
🥰🥰🥰🥰🥰👍👍👍👍👍🥰🥰🥰🥰🥰
no one is talking about Louis Rossman :(