A4-H2O PC build - Parts transfer from NR200P MAX | i5 12600k + RTX 3070 Ti | ASUS
Вставка
- Опубліковано 21 лип 2024
- This is my A4-H2O PC rebuild. I transferred the parts from my NR200P MAX PC to to the Lian Li A4H2O case. It took me awhile to actually get the case and build it even but I'm happy that I got to do so. I'm probably gonna use this PC for a bit or until I decide to upgrade to newer hardware.
Let me know what you folks think!
#LianLi #A4H2O #ASUSROG
••••••••••••••••••••
⏰ TIMESTAMP
00:00 - Intro
00:26 - Disassembling the NR200P MAX
02:50 - Reviewing the old parts
04:13 - Going through newer parts
06:47 - Reassembling PC to the A4-H2O
08:01 - Attaching the motherboard
09:50 - Attaching the AIO
11:10 - Attaching the Power supply
11:35 - Attaching the graphics card
11:59 - Attaching the SSD
12:30 - Closing everything off
12:52 - B-Roll and Outro
••••••••••••••••••••
⌨ COMPONENTS
PC Parts Picker Link:
pcpartpicker.com/b/sscTwP
CPU: Intel i5-12600k
GPU: ASUS GeForce RTX 3070Ti TUF Gaming OC
MOBO: Asus ROG Strix Z690-i GAMING WIFI
RAM: Gigabyte Aorus 2X16GB DDR5 5200MHz
SSD: WD SN850 + WD SN550 + WD Blue 1TB 3D NAND
CASE: Lian Li x DAN A4-H2O
PSU: Corsair SF750 Platinum
AIO: Phanteks Glacier One MP + LGA1700 Bracket
FANS: 2 x Noctua NF-A12x25 PWM Chromax
ACC: 1 x Braided SATA Cables, Phanteks Neon
••••••••••••••••••••
🎶 MUSIC
This Too Shall Pass by Smile High, Teddy Roxpin
chll.to/9a9a943f
Winter Chill by Emapea
chll.to/1abb5a32
Green Tea by Eli Way
chll.to/6080b3b5
Nectarine by Es-K, Danny James, John Culbreth
chll.to/6d50e228
Music by Chillhop: chillhop.com/listen
Listen on Spotify: bit.ly/ChillhopSpotify
••••••••••••••••••••
Wanna collaborate? Hit me up at:
💌 hey@jel.vin
Check out my works at:
📸 Instagram: / jelvin
🖌 Behance: www.behance.net/jelvin
🏀 Dribbble: dribbble.com/jelvin
••••••••••••••••••••
Stay in touch with me online:
Website: jel.vin/
Facebook: / jelvinbase
Twitter: / jlvnbs
Linkedin: / jelvin
Medium: / jelvin
••••••••••••••••••••
📽 GEAR USED
iPhone 12 Pro
Nikon D800 + 35mm 1.8 + 40mm 2.8 MACRO + 50mm 1.8G - Ігри
I enjoyed this a lot
Always knew you had good tastes
I really enjoyed how you explained what you decided on, and that you showed how you decided to expand memory.
Back to this video 3-4 months after building on the case. Not the easiest build of my life but it certainly was easy to build in. Phenomenal thermals and acoustics after undervolting the gpu. Recommend the pcie 4.0 if you guys have the money
How did the thermals compare to the CM NR200?
Awesome video. I've got an A4-H2O on the way tomorrow and have been watching a ton of videos to get a feel for the build experience. This is the first one that included cable management tips pre-motherboard install. Good stuff!
Thank you so much! Wishing you a smooth build ahead!
I just liked the video when you smoothly replaced the old case with the new one at 00:15.
For some reason it looked so Nice!
Thanks so much! It's just a simple crossfade transition.
Also, I wish the lighting was better 😂
Really useful vid for me as I'm planning to downsize to this case. Great vid, subbed!
This is the best build guide for A4-H2O on UA-cam
Thank you!
Very helpful video to me and your video skills are great, I hope you keep on making vids in the future! I have all of my parts on the way for my dan a4 h2o build and I can't wait. Moving from a Corsair 5000D so the size difference will be huge.
Best guide so far. Gonna watch this again while working on my A4 H2O build this weekend
Thank you! Hope you’ll have a smooth build and happy to have been some help with the info I shared in the vid.
Quick question: I want to keep 2 ssds instead of just 1 like in your case. I'm stacking them using some sort of bracket. You think there' enough clearance under the PSU for this?
@@lstommy so I tried fitting 2 SSDs at the bottom using a pair of small side brackets and it fit for me since I have enough clearance.
@@Jelvin that's great news. Thanks a lot man!
Great Build. Was fun Too Watch. Thanks Bro
thank you so much!
Great step by step, you should more of these . Subbed 👊🏿
Thank you! Really appreciate it! Hoping I can get to do more builds too.
What a neat build
I recently moved to the A4-H2O from a NR200P myself , with pretty much the same components as yours. However originally I had purchased the EK-AIO Basic 240mm , but that didn't fit onto my Z690I ROG Strix ITX motherboard. I got a Asus ROG Strix LC II 240 instead and it does an awesome job of cooling the 12600K
The Strix board really has a lot of incompatibility issues though I'm glad to hear the the LC II 240 fit; would've been ironic if it didn't 😅
Great video. This is how it should be built.
Nice cable management.👏
Thank you 🙏
Great video!! Very informative
Thanks so much!
Thank you for this. Jumped from the Partpicker link. About to rebuild from a Meshlicious to this bad boy
No problem! Happy to share and hoping you have a smooth swap 🙌
Very good video, and I liked your NR200P Max video too. Technical content is spot on, and production quality is great too. I just subbed ;). I like that you included a list of gear used to create your video. It would be even better if you could include a more extensive list of tools used, such as audio recording equipment, lighting equipment, and what software you use for video editing etc. I'm sure a lot of people would be interested in that. Even simple things like your preferred set of screw drivers. Maybe I'm crazy but I'm interested in those kinds of details. It would also be nice to see some details on CPU and GPU thermals under load, so maybe another video dedicated to that?
amazing video bro
Thank you so much! Really appreciate the feedback
i really like this case, SFF PC are the best
Nice build that being said I really want to downsize from my massive but well cooled Torrent Nano to this or the NR200 but that being said hard to spend around $300-350 total for parts that do not increase my performance in any way. Already have a RM850X won't fit and my air cooler won't fit. That being said I really like this Lian Li Dan case.
Thanks! It's just a matter of preference really. I personally won't bother getting this if I didn't have ITX parts anyway.
Sidenote: I like the Torrent Nano too. I've seen it in person and I would've went that route if I didn't have this addiction to sffpc's lol
@@Jelvin Yeah hard to beat 2x140mm front 2x140mm bottom and 1x120mm back along with a dark rock pro 4 :P Large for ITX but my thermals are amazing.
Awesome build man, Wanted to ask What are and where did you get those small wifi antennas?! they are perfect.
Thank you! I couldn't find the old link but just do a quick search on "mini wifi antenna" on Amazon.
Hey, great build! May i know what you use to clean the pump block and cpu surface before applying thermal paste?
Do you use a cleaning alcohol of sorts, and if so what percentage?
I have a bottle of 100% IPA for cleaning along with shop towels
so awesome build, i've build with same motherboard and this itx case but do you have problem overheating with using double nvme? if you have same problem, how do you solve this problem. thanks before, cheers.
Dream build, can you share some gaming benchmarks?
Thank you! I’ll follow up on some numbers for a couple of games when I have time.
Amazing video! How has this case been long term? Also in the outro I noticed some sort of RGB strip on the bottom on the GPU side. What is that??
I've been using the case since then :) The LED strip was the Phanteks Neon LED Kit; i removed it after the first clean.
Awesome build! I have been trying so hard to find a reasonable 240mm cooler that will perform well AND fit the case AND the z690i strix. Just curious, has the 240mp AIO worked / performed well for you? Is it quiet enough with solid temps? (I noticed you upgraded the fans)
Working pretty good 8 months in! It was confirmed by people that T30's fit so I went ahead and placed it in as long as you don't screw in the inner screws.
The build was gorgeous, Jelvin! I was planning on building a similar a4-h20 with the same aio choice of you. From what I have found, for phanteks glacier one, Dan the designer suggests that the tube should be routed underneath the psu rather than the route you went with(over PSU). However after watching your video I was planning to route it over too because the result is just way more clean than the recommended route. Did you discover any difficulty when installing the AIO this way?
Hi Sharke! Thanks for the feedback. Really appreciate it. The reason why I routed it to the side is because I wanted to place SSD's at the bottom and experiment what I can do with the space (if there is any).
That said, I'd probably route the tubes at the bottom if I'm not putting anything down there since it won't bend the tubes as much.
There weren't any problems but it took some time to get the configuration right. Do check my reference in this album imgur.com/a/BevVE0E. So far, haven't found any problems after some months of use.
@@Jelvin Thank you for sharing this inspiring information! Subscribed for upcoming video!
I am really digging this case to build on, especially the white one but a great fear also hindering me as the first SFF build.
Would the temperature be better in this case compared to NZXT H510 flow?
Although I don’t have/own the H510 Flow, it’s assumed that temps will be a bit better since it has more room for parts to breathe and more airflow since you can add more fans.
IMO, In general, sffpc’s especially sandwich style cases will suffer from high temps with higher end hardware since all of the stuff are placed so compactly.
If you’re looking into an SFF build that’s pretty okay with temps, I’d go for the NR200/P cases.
Just undervolt if you suffer from high temps. the 510 flow is good
what would be the better AIO cooler to go with, if I'm using a 13600k or AMD 7900 cpu (temps and cpu block height wise)?
Great video! I am about to make the same case swap, is there anything stopping me from reusing the power supply from the NR200P Max?
Nice! Hoping your case swap will be smooth sailing:)
It shouldn’t be a problem honestly; it’s just a matter of taking the power supply out of the shroud and removing the cables by cutting some zip ties holding it and you’re technically good to go.
Me personally I kept the PSU on the MAX intact since it’s part of the product.
Great vid, looking forward to using it to help with my build. Wanted to ask a few questions… How hot does the SSD on the bottom get? Would you recommend custom cables? Are you still happy with the AIO?
Thank you! Really appreciate your feedback.
When you say SSD, do you mean the M.2? I have custom cables right now in my build just to make things cleaner since I have additional 2.5”s; I wouldn’t go as far as buying them if you won’t be putting anything else at the bottom.
For the AIO, since options are limited because of compatibility, I chose the one that’s confirmed to have okay fitment. So far so good on the temps.
@@Jelvin I meant the 2.5 yeah. I'll be adding 1 at the bottom myself... Did you get the SATA cable custom made too? Can you remember the lengths of the cables?
With the 24 pin and the Corsair I've read between 240 - 300mm; the EPS 400 - 430mm and the GPU 110 - 180mm. I was just going to go between them all i.e 280mm // 415mm // 145mm as my cable guy needs exact lengths. But as you've got the same components, anything you could share would be great!
@@SG1SG00 The SATA cables that I got were generic thin cables from Silverstone. I can't find the link but ti should be on Amazon; it's the teal colored cable.
I can share the lengths that I chose for my custom cables but it's not an exact fit as I prefer the cables to have some slack but that's purely personal preference.
custom.cablemod.com/8d932a4ba5f9
This was incredibly helpful for my own build, best guide I've seen. How are the temps on your rear mounted m.2 NVMe drive? I have the 970 Evo Plus myself and it runs extremely warm sanwitched in the back there. I'm uncertain if you used a rear heatsink?
Thank you so much! Really appreciate it!
For the M.2, I haven't done any benchmarking for the storage but I've seen the rear M.2 go up to around 55C on my PC. I think people have been experiencing this too based on what I see on the ROG forums.
Okay interesting, my rear m.2 is about the same at idle, 50-55*C. A short period of writing or downloading though brings it up quickly to +90*C. There really isn’t much room for airflow under the riser cable.
Thanks for the reply!
@@oGoggles Sorry for the confusion! I meant to say 50C to 55C on idle. Same situation as you. That's why I only have a Gen 3.0 M.2 there.
@@Jelvin This is great to know, I'm glad it's only Gen 3.0 for the rear! Makes me feel a little better I'm not alone. Thank you so much for your insight.
@@oGoggles No worries! I think it's been a problem for a lot of people with this board. Some even opted to not include the front M.2 altogether and just use the slot at the back.
I've been using the WD Blue (rear M.2) for downloading since Feb 2022 and so far it's still at 100% health based on CrystalDiskInfo. Hope this info help!
Apologies again for the confusion 😅
Nice vid bro! I have a noob question haha. Why the fan of SF750 is not spinning? Thanks!
Thank you! For your question, PSU fans normally won't spin unless it hits a certain temp.
@@Jelvin Thank you so much for the response bro!
Nice build. Why did you choose to upgrade though? From what research I’ve done the NR200 runs a lot cooler and is cheaper. Was it mainly for looks and smaller size? I love the look but I’m worried a 3080ti + 12700 might run too hot in this.
Thank you! Apart from the GPU, It’s not really an upgrade but a case swap :) I actually wanted the case because of the size but I do agree that in terms of thermals, the NR200P MAX gives a lot more headroom.
What I have is actually just the 12600k + 3070ti. If I were to get the 12700/k and 3080 above, I would’ve needed to undervolt it in this case hence my choice of parts.
i would say, temps are pretty good in my A4H20 build, gpu is basicly on an open bench, 240 rad does draw in gpu air, but its has plenty of overhead to handle it
Is it necessary to use a water cooler can't we use the normal air fan comes with processor ?
is it possible to fit the phanteks t30 120mm fans in there which has 30mm of thickness?
Awesome build - what are the temperatures compared to your old case?
Sorry I didn't do a proper comparison since the parts are a little bit different but the temps are a bit hotter since I'm using slightly better parts .
I would be interested in the GPU and CPU temperatures, I had the Phanteks Shift XT, but unfortunately I had to send it back because my system just got too hot (5800X, 6900XT)
Quick answer:
CPU: 68C Ave
GPU: 62C Ave
I have some notes here on my other video but the setup was with the Phanteks Glacier MP240 as the radiator but T30's for the fans.
How are your temps compared to the NR200P case? I’m debating between those two but I can’t find any real usage comparison.
Can't really do a direct comparison since the PC's built already but the temps I got back then on the NR200P MAX are a bit better by 1 to 2C compared to the A4H2O.
yo, still using it? if this could use the T30 phanteks id be all over it. would it give a good result having the fans sucking in cool air from the outside to in, so they also then push air down as opposed to up and out (which would suck hot air up and over the radiator fins)
What would this build cost in total more or less?
Will the System Running quiet. Would you rate the aio as Silent?
Thanks and nice Build!
So far my system's pretty quiet for my taste since the PC's a meter away from me. On my end, I only hear it when I'm really close to the PC.
Thank you!
I’ve built a similar sfx build with the same Aio and my side panel gets bent a little by the Aio tubing, is that the case for your build, too?
It just bends a tad bit but not too noticeable.
Are the power cables for the GPU the ones that come with the power supply, or are they custom cables?
I used the ones from the PSU here but I swapped to CableMod ones now
Hi Sir, may I know is the aio tube easy to bend to be adjust in the A4 H2O case? Going for B660i Rog. Does it will fit like yours? Thank you
Hello! It's a little bit tricky to bend the tube but if you're not using the bottom compartment, you can always route the tubes down there.
This is how I did it: imgur.com/a/BevVE0E
@@Jelvin Thanks for the image with the highlight, super useful for my guidance. 👍👍👍👍👍
hello bro im planning to build an sfx with the same specs from your build but im thinking about putting 2 pcs. m..2 in the motherboard and adding 2 ssd is that possible?
If it’s the z690-i strix then you can add 2 m.2’s. For this case, you’ll need enough clearance at the bottom compartment to fit 2 SSD’s. I’ve tried it on mine and it fit since I have braided cables.
This is the exact configuration that I am planning to build and was wondering about the temperatures. Can you share your results if you have done any tests? Thank you beforehand!
Sure thing! I haven't done any extensive tests but here are the rough numbers that I can share. The test was done in Furmark and R23 running in parallel for 1 hour. On load, the PC peaked with the numbers below. Everything is on stock except for the fan curves. I haven't OC'd the PC yet since I don't feel comfortable doing so.
Idle
- CPU - 35C
- GPU - 35C
On Load
- CPU - 72C
- GPU - 65C
@@Jelvin Hi Jelvin at which ambient temperatures did you achieve these results?
@@lstommy Not sure; probably around 21C to 23C. Sorry can’t confirm it since I don’t have a thermometer in my room.
EDIT: I actually bought a room thermometer lol. I’ll do another round of tests and post a follow up in the description.
@@Jelvin no need to invest in new tools off my 1 question bro. My temps are about 7-8 degrees higher than yours. But if your ambient is 21-23 then it's also 7-8 lower than my room anyway. So no anomaly there.
Btw, I successfully built my PC and was able to stuff 2 2.5in SSDs in there (as discussed in my other comment). Thanks a million!
@@lstommy thanks for confirming! The thermometer’s only a few bucks and it’ll be helpful for future builds anyway.
Glad you have your build up!
Are those double-sided disks? People say that single-sided SSDs bend when mounted on that board because they don't have enough thickness to fill the spaces between the thermal pads
WD 500GB is single sided and 1TB black is double afaik. I never had any problems even until now.
@@Jelvin Thank you very much, Awesome video btw.
If you use air cooling for the CPU, is it possible to fit 1 or 2, 3.5" HDDs instead of the radiator?
Unfortunately, I can't confirm it myself but theoretically you can fit 2 as long as it's the right orientation. Also, the case doesn't have dedicated HDD mounts so you have to hack the how it's gonna be screwed in place.
But I honestly would just get a bigger case if I'm gonna put HDD's into the system so cable management and routing won't be a drag.
@@Jelvin Thank you. I'd like to have an all on one solution for large storage capacity and redundancy, hence my question.
Is this a case still to consider over dan c4 thats just realeased?
I think it depends on the availability. I'd choose either if both options can be purchased
can u use the Asus strix b660-i with the inteli5-12600k and asus tuf rtx 3070? or are there going to be issues?
Yes, buying x series mobo for 12600k is really dumb. You dont need top end board for midrange cpu, those are only for i7/i9 k models (non k variants are fine on b series boards). If you spend more money on mobo than cpu you dont really know what are you doing. Mobo is quite easy to overspend on and blow your budget. Its better to buy i7(non k) with b series board than i5 k with x board.
how about the cpu and gpu temp? i wanna build in this case too
I don't have case temps for this configuration unfortunately but I did some quick tests with my current configuration
ua-cam.com/video/X7ISQC0Tf1I/v-deo.html
Did the temps get better or worse in this case?
Got hotter by 3-5C
Hm, the NR200 doesn't look that much bigger than the H20 in your comparison. The taller feet of the NR200 make the biggest difference. Is that a false impression or would you agree that it the difference is not that big? thx
Maybe it’s because of the perspective and how I presented it. I’m also not sure how you benchmark the difference but comparing between the two SFF cases, I think there’s a significant difference but that’s just me.
Why did you upgrade the fans on the AIO to the noctuas? Better performance or just quieter?
I just wanted quieter fans with the Noctuas but I actually changed the fans to the T30’s already FYI.
@@Jelvin Does the aio pump cover reduce noise as well? I have the same one but the side panel won’t fit on because the tubes can’t bend all the way down with the pump cover on.
I actually didn't notice any noticeable difference in noise with and without the cover. I still have mine on and I didn't mind the noise levels sitting around 2 feet away from the PC.
What orientation did you place the pump block? I have mine to the left and it fit with a little bending; no problems closing the panel on my end whatsoever.
@@Jelvin I also have it on the left
@@JackWutang hmm not really sure what’s happening on the tubes in your PC but I’m assuming that the slack/tube orientation is different. Sorry for not being much help on that part
hey jelvin, i got a quick question. I am tranfering my drives from my current atx pc. I have 2 sata ssds, 2 nvmes, and one 3.5in hdd. My satas are 2tb each, nvmes are 500 and 1tb, and my 3.5in is 4tb. I wanna keep my 4tb, and i was wondering if there was enough clearance underneath the gpu, cause im running a rtx 2060 super. I might actually use the ssd brackets that u had reviewed in ur hacks video. But if there is enough height clearance, between the base of the case and the underside of the vertically mounted gpu, is it theoretically possible to both dual mount the ssds with the bracket, and friction hold the 3.5in? Cause i think if it is feasible, then the 3.5in can also double as a stabilizer/vertical gpu mount sag guard by adding more stability.
I don't think that the 3.5in HDD would fit unless you have a short card i.e. an ITX card. There wouldn't be any other clearance for an HDD apart from the compartment where the GPU is so I'm not sure if all of your components will fit. :(
The HDD will be a bit to big for the components to friction fit at the front I believe so unless it's a smaller card, the best you can do is the have the HDD stand beside the GPU which I don't really advise.
@@Jelvin i have an rtx 2060 super founders edition, and by nvidia's trend in designs, the fe cards tend to much smaller than other redesign companies like asus, gigabyte, and msi(etc.)
yeah i think this is just going to a big fight of finding the right set of space to slide in the hdd.
How you think - is it ok with cable if I shoose SFX-L PSU?
I've seen builds with SFX-L but you need soft/custom cables.
how about temps? im planning to do the same too.
Quick answer:
CPU: 68C Ave
GPU: 62C Ave
I have some notes here on my other video but the setup was with the Phanteks Glacier MP240 as the radiator but T30's for the fans.
Hey man I know this is a bit late but how hard does the tolerance of the AIO tube kicking the side panel with the infinity mirror display?.
I'm having real trouble doing it right with the exact AIO.
Hey man! For my build, only a bit. It needs a little working for the tubes to fit optimally. The side panel on my build bumps just a tiny bit but not hard to close.
Here's how I did it: imgur.com/a/BevVE0E
Hope this helps even a bit.
@@Jelvin is it due to how the tube being route?.
Mine kicking the side panel so hard I can't even close it unless forcing it which even then, will kick it out anyway unless using the thumb screws again which I don't want to.
Honestly I'm considering swapping for another AIO lol.
@@BronislawStark Having braided cables also help the tube to bend a bit easier but if you find that replacing the AIO works then that sounds like a good option.
Can ANY of these cases house the New 40 series GPUs specifically the RTX 4080….?
Not sure since there are no specs yet out from other manufacturers. I wouldn't even recommend putting a 40 series card in an SFF case (other than cases like in the NR200 line)
@@Jelvin i just read, Size wise they are a few mm smaller than a 3090 so any case that can fit a 3090 should work mostly for 4080 at least.
Yes, i think the NR200p/Max is the best case for it.
@@powerhouse884 Got that. Haven’t read up on it so thanks for the info. I think the upcoming A3-mATX from Lian Li would be a great contender if that’s the case. More space for cooling is needed I reckon
Wich of these two would u recommend to for a first budget build?
NR200P of you want ease of assembly but A4H2O if you want a smaller case. Neither are budget builds in my opinion so I just recommend to get whatever is most accessible to you.
@@Jelvin isnt the nr200p max cheaper cause it has a psu and aio installed already?
Edit: u just earned yourself a sub
@@determask_yt In my country, it's more or less the same if you calculate it separately but it's more or less close.
@@Jelvin ait
can you mount the 15 mm tall 2.5 hdd instead of that 2.5 ssd?
It should fit one but I wouldn't place an HDD there.
@@Jelvin why wouldnt you put it there? heat issue?
is this case good for heavy gaming??
Mine’s doing good after 3-4 hours of gaming under 70% to 80% load. Can’t say for sure for 90% utilization and above.
Hey, how much did this build cost?
Hi! It took me more or less USD2,500 excluding tax when converted.
How is the temp and noise compared to nr200p?
Unfortunately I don’t have any concrete numbers but noise levels are the same with both cases but temps on the A4H2O are hotter.
Can’t do a direct comparison too since I had a 3060 Ti on my NR200P Max while I have a 3070 Ti on the H2O.
@@Jelvin would you say its hotter where it could bother long hour use?
@@moyzone4887 Sorry I don't think I understood your question. Did you mean to ask if the H2O is hotter than the MAX case during long hours of use?
@@Jelvin yes
@@moyzone4887 Gotcha. So in terms of long running temps, the H2O case runs hotter after 4 to 5 hours of Monster Hunter: Rise. I don't have the exact numbers for comparison unfortunately.
Where is the temperature results???
Temps from initial test
The test was done in Furmark and R23 running in parallel for 1 hour. On load, the PC peaked with the numbers below. Everything is on stock except for the fan curves. I haven't OC'd the PC yet since I don't feel comfortable doing so yet.
Idle
- CPU - 35C
- GPU - 35C
On Load
- CPU - 72C
- GPU - 65C
@@Jelvin oh really?? For this small guy it's amazing results. 😍Thanx
@@ilontwitter ambient is around 21-23C :). Thanks!
🙏🙏🙏😍😍😍😍😍👍👍👍
No Dustfilters at all. Im sure u have fun disasambling everything to clean it from dust :D. For me an absolutely no go all these cases without dustfilters especially for the price.