MIN/MAX - NR200P MAX Build | i5 12600k | Aorus Z690i DDR5 | RTX 3060 Ti
Вставка
- Опубліковано 8 лип 2024
- 🟥 TO ALL WHO BOUGHT THE Z690i rev 1.0 BOARD 🟥
Please note that Gigabyte announced an exchange/refund option on their website. Depending on where or how you bought it, you can process an exchange (to the PLUS version of the board) or a refund to your account. Fortunately, the store where I bought my original z690i board from was kind enough to process my request for a refund. Check out the exchange/refund option below:
member.aorus.com/global/z690i...
For future buyers of this board, please take note of the "PLUS" word on the print so you won't get the version with the PCIE issues. The "LITE" version of the board can only be set to PCIE 3.0.
🟧 NOTE as of May 10, 2022 🟧
Gigabyte silently rolled out a "PLUS" version of the board which assumably "fixes" the PCIE 4.0 issue while rebranding the old boards to "LITE". If you're still considering this board, please make sure that you're getting the "PLUS" board and not the "LITE"
www.gigabyte.com/Motherboard/...
🟧 About the fan configuration 🟧
I've updated the fan directions already. Here's my updated build video: • From AORUS to STRIX - ...
The directions in this build is a recommendation I followed from Ali's (OptimumTech) review of the same case. Check it out what he said here: • The New NR200P MAX Can...
🟧 WARNING as of Feb 12, 2022 🟧
If you're planning to buy the Gigabyte Z690i Aorus Ultra DDR4/DDR5 motherboard, I suggest buying a board from a different brand instead as I and a lot of other people are experiencing PCIE Compatibility issues, WHEA errors, and Blue screens. I suggest holding off buying this board until Gigabyte fixes this mess up. Goodbye for now, Gigabyte!! 😪😪😪
#NR200PMax #RTX3060Ti #DDR5
••••••••••••••••••••
⏰ TIMESTAMP
00:00 - PC Case prep
01:52 - Components prep
05:22 - PC Assembly
07:08 - Peel
07:22 - B-Roll + Photos
08:36 - Music Credits
••••••••••••••••••••
⌨ COMPONENTS
CPU: Intel i5-12600k
GPU: Gigabyte GeForce RTX 3060Ti OC
MOBO: Gigabyte Z690I AORUS ULTRA
RAM: Gigabyte Aorus 2X16GB DDR5 5200MHz
SSD: WD SN850 + WD SN550
CASE: Cooler Master NR200P MAX
PSU: Included in the case
AIO: Included in the case
FANS: 2 x Noctua A12x15 PWM Chromax
pcpartpicker.com/b/3Zk6Mp
••••••••••••••••••••
🎶 MUSIC
Talk by Misha
chll.to/0a65098d
Winter Chill by Emapea
chll.to/1abb5a32
Festa by Misha, Jussi Halme, Soul Food Horns
chll.to/8cfd64a2
Music by Chillhop: chillhop.com/listen
Listen on Spotify: bit.ly/ChillhopSpotify
••••••••••••••••••••
Wanna collaborate? Hit me up at:
💌 hey@jel.vin
Check out my works at:
📸 Instagram: / jelvin
🖌 Behance: www.behance.net/jelvin
🏀 Dribbble: dribbble.com/jelvin
••••••••••••••••••••
Stay in touch with me online:
Website: jel.vin/
Facebook: / jelvinbase
Twitter: / jlvnbs
Linkedin: / jelvin
Medium: / jelvin
••••••••••••••••••••
📽 GEAR USED
Nikon D800 + 35mm 1.8 + 40mm 2.8 MACRO - Ігри
Man that stacked m.2 slot is so smart. Great looking build!
Some people like me may think it’s a point of failure tho especially if you keep swapping out part but nonetheless the build was good. Thank you!
Everything from building, to editing was smooth 👌
I love your build its so clean and powerful , thanks for sharing
Aweome video man, it's helping me a lot with my build! ⭐
Very nice built! Love this ITX case! 😍
Thank you! Loving the case too!
Your music choices are on point
Excellent video. I do plan on upgrading to 12th gen next year from my locked i7 I got from a ibuypower pre built system last year. Noticing some stutters here and there in my games so ya got some saving up to do. :)
Thanks so much! Would probably wait for DDR5 prices to go down while waiting for the 40 series GPUs if next year's your target. Wishing you good luck with your build by then!
Solid video. I made a simular build, same case and with the DDR4 version of the board and I had the same issues and then some.
I found the blue screens were the fault of one of the gigabyte apps - Easy Tune.
I experienced crashes - and this was due to the RAM not having enough power, so it lives at 1.41V now.
Apart from that. Not a bad board.
Thanks for the feedback. May I ask if you set the CPU settings to PCIE 4.0 on the BIOS? That's what's mainly causing all of the problems for those who bought the board.
@@Jelvin I changed all the settings to PCIe 3.0 as I am using 2 X 970 EVO Plus NVMe Drives. Seems to have fix it. Been good for the last few weeks since the comment above.
@@DangerLlama Yup that's the current workaround for the motherboard and it was doing okay but I can't shake off the thought of the board not working in PCIE 4.0 so I got the Strix board instead. Will have the Aorus board sent to RMA.
yoooo finally a good yt recommendation, i saw the thumbnail and thought it was a big channel build
Thank you so much! Really appreciate your words 🙇♂️
Amazing bro keep it up subbed ❤
wew.. that was epic ITX build 😍
Thank you so much! 🙌
Quality content there. Thanks.
Thank you! Really appreciate it!
Yeah. I’m gonna build with this aesthetic. Thanks for the video!
Wishing you luck with your build! 🙌
@@Jelvin Oh by the way, what is that lighting under the case? RGB strip?
@@DaniIhzaFarrosi Phanteks Neon 👍👍
@@Jelvin Ah thank you! Having trouble looking up the name on my country’s online store. Thanks
@@DaniIhzaFarrosi all good! No worries
Clean set-up
Thank you! Really appreciate it.
Nice clean setup man! I have the white version of the NR200 but wish I had got the black or gray one. Overall, great looking system!
Thank you! Really appreciate the feedback! I wish there was a black version of the Max case tbh.
why dont u prefer the white version?
@@syafiqaddin2667 there’s no white color for the NR200P Max :)
@@syafiqaddin2667 the white model is nice but I’d rather get the black one because it looks for sleek and goes better with my setup. Just preference I guess.
Look awesome, love it
Thank you so much! But I’ve swapped my case to the A4H2O already 😅
Ooof.... So clean ✌️
Thank you so much! I’d want to make it more organized in the future when I clean up my pc 🙌
Perfect !
thanks
neat 🔥
Круто, что сказать!
This is my exact build
nice build
Thank you! Really appreciate it!
Hi, nice and clean build. I'm planning on getting that nr200p. Btw, I read your description and it's not just you. Several months ago (early februari) I bought an Aorus b660m pro ddr4 and got the pcie issue.
I didn't get a display and the error code was 5x beep. I reinstalled everything but still no display. I went to the seller and they sent the board back to the distributor. They tested it out and said it works fine, I told them to update the bios.
I brought it back but nothing happened. Switched the gpu to the 2nd (the bottom one) pcie slot and it worked. I changed the bios setting to pcie 3 and I got the display back from the 1st pcie slot.
I checked my nvme with crystaldisk, it runs on pcie 3x4. Then I tried to change one (I forgot which one, there are two pcie version settings) back to auto in the bios, double checked my nvme and it's running pcie 4x4. The gpu still runs on pcie 3 tho but it's not a big deal for me. The problem will happen again if it runs on pcie 4 ig
I can't afford to buy another board for my 12th gen cpu so I have to deal with it until I get myself another build xD. I want to try mini itx ryzen 7000 next time with nr200p
Nice build! How are the temps?
Nice build! Great video.
Does the AIO of NR200P MAX comes with a LGA1700 mounting bracket?
or does it need to be purchased additionally?
Thanks.
Thank you! Really appreciate the feedback. LGA1700 is included. That’s the one I used in the build as you see on the video.
Hey, got some question about ITX motherboard. I saw on reddit that ppl are complaining about ASRock power limit to 150w long term and short term 250w, soo that mean you will shortly run a i5 or i7 12/13th gen at much lower performance in load because of that power limitation and that would be waste of money for me on some gear that are not working at full potential. My question is, did you're motherboard have same power limitation? Do you think it will be any kind of difference in performance between an ITX and MATX/E-ATX at stock( only turbo boost and XMP)? Thx!
Thats a sexy pc my dude
Thank you! Really appreciate it
Hy, why you put bottom fans in exhaust? Performances are better than intake?
Loved your chill way of building - about to do a build with this case myself and it looks SO EASY to build in! Did your Noctua Chromax fans have plenty of clearance at the bottom, or no issue at all with an RTX 3060 Ti?
Thank you! The Chromax fans at the bottom are the A12x15's; you can actually place a normal 25mm fan under the PSU provided that you put a little effort on cable management :)
I've actually sold my 3060Ti for a 3070ti but I had no issues during the time that I had it.
@@Jelvin awesome - and the 30 series cards are all fairly simile dimension-wise, right?
@@Weird_Quests you might have to double check the product site for the specs. Some cards like the TUF cards are a bit larger compared its counterparts.
I see that you mounted the bottom fans as exhaust. Does this means the top ones that are connected to the radiator are intake?
For the fans at the bottom, was it intake or exhaust?
nice
Thank you! 🙌
You just mounted the bottom fans as outtake
I’ve already updated my build. Check my video here ua-cam.com/video/vsGnVbXp1Go/v-deo.html
For the LGA 1700 mounting bracket on the back side (the plasticky part) of the mobo would it matter which side faces the north? For your setup, as seen in 3:06, the little indentation looks to be facing towards the bottom of the mobo, but for my setup, I made it face the top.
IIRC, I just followed the manual but I think as long as it’s not causing any spacing issues, it should be okay
awesome build mate. been looking for a non crazy nr200p max build that didnt have a 3080/90 lol. looking to build one too but my friend recommends going with minimum 3070 to run 1440 for games. how you find the 3060ti performance?
Thanks, mate! Really appreciate your feedback!
I'm actually satisfied right now with my 3060 Ti. I'm not much of a AAA gamer so the select titles that I play look good to me on 1440p. (I updated my desk set up to a 1440p monitor as my main view). I recently ran Elden Ring on Med 1440p and it's giving me good frame rates so it's enough for me.
Your friend's reco sounds good! IMHO, If you see any deals for a 3070 Ti, I'd probably go with that if the difference isn't that huge.
Nice video ! I’m building in this case with the same board now. I couldn’t tell in the video, but where did you put your 3 pin from the AIO block?
For this specific motherboard, the 3 pin header for the AIO pump on the motherboard needs to be connected to an extension cable that’s in the box then you can connect the header.
@@Jelvin I did the same thing! Wasn't sure cause I couldn't tell what you did in your video. Thank you for the reply! Assuming you also put the radiator fans into the Main CPU FAN header as well. Keep making more content its very good.
@@tonywilde Yes it's actually the same for all of the headers on the Aorus Z690i motherboard. Hope you got your PC up and running! Thanks as well for your words. I really appreciate !
So im looking to build a similar build but with a 6800 XT or 3080. I see you used the cromax fans on the bottom to exhaust and not pull air in. You think it makes a difference?
As mentioned in the description, I've already updated the configuration to top intake and bottom exhaust as recommended by Machines and More. But the configuration in the video (recommendation in one of OptimumTech's review of this case) had pretty okay temps and a little bit better than my current config with the Mesh panel.
The lights on the bottom of your case (lights which glow up at the same time when your GPU glows up), what is that? Is that included with the NR200P MAX? By the way, a super video! I pretty much bought all the parts too and I'm going for the same build :)
Thank you! Hope you have a smooth build ahead! It's the Phanteks Neon strip
This is exactly what I was looking for! Wondering what the length of the Phanteks Neon Digital RGB LED Strip you have used in this build is?
Thank you! I think it's the 1M one.
@@Jelvin 100% sure? haha
Hi jelvin, I’ve got a quick question, how did you connect the 3pin aio connected to the 4pin header on the motherboard? I googled people said it is ok to do so, but it doesn’t fit on mine, got the exactly same motherboard and case as you
You should see 3 pcs of extension cables for the FAN and AIO headers in the box. You have to connect those extension cables to attach it to the right header.
@@Jelvin you saved my life, just found it and connected, now it is working perfectly!
@@user-rw6lp3vj5v mo man tai! Glad it worked and have fun with your build! 🙌
I was considering the B660 version of this motherboard, but I'm wondering if you were able to get the PCIe issues fixed?
RE: the PCIE issue, unfortunately it was mentioned that it’s a hardware issue so I’m having my Aorus board RMA’d. No fixes available unfortunately.
The thread that I’ve been following had someone mentioning that the B660i Aorus board also had PCIE Issues. I would look into it first before getting any of the latest Gigabyte motherboards.
A good albeit more expensive option is the B660i Strix as I’ve heard that people have had good reviews on it.
Hi Jelvin, i'm planning to get the Gigabyte Z690M AORUS ELITE AX DDR4 board and GIGABYTE AORUS GeForce RTX 3060 Elite 12G for my build. Will it be compatible? Thank you.
It should be compatible. Double check the QVL list on the Gigabyte website or take a stab at checking your parts at pcpartpicker.com just to be sure.
Awesome Build , I found your video, Managed to find a Max system in the UK, Can't Decide to do ,an all new intel Build or just use my old 3900x and strix 2080 ti? thanks
That really depends on you :) If it was me, I'd probably stick with the 3900X and 2080 Ti since it's still really powerful and just upgrade later when the 4000 series comes out. Zen 4 and 13th gen intel is rumored to come out soon too so I would probably just wait.
ok thanks , I will use 390x and do the build when I spare, Busy looking after a 1 year old thanks for the help
Thanks for video..I've struck problems with the pump header...it is a 3 pin cable..but I can't find this on this mobo? Where did you place the 3 pin pump header? Thanks!
If we have the same motherboard, the box should come with a converter that'll let you extend the sockets to the fan header.
@@Jelvin Thanks. Did you use the CPU fan header? I have the identical case and mobo to you. Unfortunately the power supply on the brand new case appears to be faulty.. as nothing starts up. Anyway thanks for your video.. it was very helpful..in a couple of places I would have liked it to slow down a little bit.. but overall you made the job much easier. Thank you!
@@MatthewPolack You might wanna check if the cables have been plugged in all the way. Hoping it's not a huge issue to have it replaced on your end if it really is faulty.
Thanks for the feedback! This is just a video I made for fun lol would've loved to reproduce it and add a guide but I didn't have the time. Glad it helped even just a little bit!
@@Jelvin Thanks for tips. It really was helpful. In fact I find videos like yours much easier to follow than trying to translate the manuals... I managed to do most of it fairly easily with your help....just a shame I've ended up with a broken PC. My reflection from a warranty support point of view is It's a bit risky building PCs yourself. Particularly for those of us a long way from the stores. If something goes wrong then it becomes a costly time consuming thing to fix... Anyway thanks for all your help!
Hey Jelvin. Greetings. I had a question. After mounting a triple slot average thick 3080 gpu, can I mount a 3.5" HDD in the* bottom left?* (on the floor under the gpu pcie riser). Or a 3.5" hdd is too thick to be there? I know I can mount on the right side. But can you check if I can mount on the right? I Actually need to shift my seagate barracuda in it and don't have any available slim fans in my area to put it as an intake.
Hi! Got your question. I tried placing a 3.5" HDD (WD Blue 1TB) under the riser but it's an extremely tight fit that it's already putting some stress on the riser and GPU so I wouldn't place it there unless it's a 2.5" SSD instead. If you really need to reposition your HDD, your only choice is to try placing it behind the GPU by the PSU shroud or under the right side.
@@Jelvin okay thanks a lot for your effort!! subscribed!
can you please do me another favor? can you please check if I can place a 3.5" hdd behind the GPU by the PSU shroud *when a triple slot full length avrg thick gpu is present?*
@@kaiser10-28 3.5" HDD by the PSU shroud unfortunately won't fit if it's a triple fan :( Only an SSD
There's not enough clearance sadly.
@@Jelvin And hey, can ua-cam.com/video/YADy0m7Cqbw/v-deo.html this mod be done to this Max one? If yes then Will it free up some space in the bottom?
@@kaiser10-28 I don't think it would and altering the NR200P Max isn't really worth it since it already has its own structure.
Your best bet really is to put it under the PSU (right side) or if you can, just mod your case externally to place an HDD.
Real question how did you get a nr200p max, hasent been in stock in the us at all, im pretty sure its not even released in the states
From what I’ve heard, stocks were distributed here in the Philippines a few weeks after the international release. I’m just really lucky cuz there’s ample stock here still; I also honestly didn’t know that this case was hard to find.
I just want anything that boots up, it's tough out here.
Totally get you.
@@Jelvin some day I'll have it. Peace out there!
@@sotho-centric5711 peace! ✌️ wishing you good luck with your future build!
@@Jelvin thank you good sir!
@@sotho-centric5711 all good! I recommend watching Hardware Unboxed with their monitor reviews 🙌
Hey bro, I have purchased the Mobo before watching your vid! I've got the ultra lite. How concerned should I be? And how do I know if it's the plus version?
I haven't read up any news on the mobo unfortunately but I would recommend checking the Gigabyte reddit thread. The LITE version as far as I know only support PCIE gen 3.0 settings.
Check this box if it has the PLUS symbol to be sure.
Did you know that you can actually fit in a 120mmx25mm fan on the bottom right?
Yeah I did but the A12x25mm ones nor the Chromax ones weren't available on my end during the time I bought these parts so I opted to buy both slim ones.
Thank you for the video. How is motherboard issue after a month? I am choosing between this one and ASRock Z690M-ITX/ax for a DDR4 build. Should I go for Asrock instead, I am concerning about the issue you bought up?
Thanks for your feedback too! As of today (2/25/22), no updates yet for the Gigabyte Z690i boards both for DDR4 and DDR5 so I would probably avoid that board.
Unfortunately, I haven’t done any research about the ASRock series of ITX motherboards so I believe going to their boards/forums, or to Reddit to check out what other people are talking about can help you with your decision.
Personally, I ordered the z690i Strix but I haven’t received it yet so can’t give much opinions about it other that what I have.
@@Jelvin Do you think that can solve with a Bios att? Or is a hardware problem?
@@MrEdiosley Can't answer that since I'm not even sure if it's a hardware problem or not. Hoping it's not since I can't return my board for a refund anymore
@@Jelvin What about the Gigabyte warranty? Don't they have to change the product if they can't solve it. Have you heard something similar, like older board that happen something like that?
@@MrEdiosley That's my plan. I'm gonna have it RMA'd once the issue's been confirmed. I can't have it replaced for now since the issues are confirmed for all cases (based on what I've been seeing and reading on reviews and forums/on Reddit) and it'll probably be the same issues once a new board arrives.
RE: older boards I own, I'm currently in the process of getting another board fixed via RMA (but the process is extremely tedious and long at least from where I live; luckily I'm in good relations with the shop I bought parts from)
Hi! Do you notice any issue with the motherboard? Out of the only 4 (for now) from MSI, ASUS, ASRock and Gigabyte, the Aorus is the cheapest DDR5 (and also the best looking board, for me) so I really wanna get it. But reviews from Reddit, Amazon and Newegg say that there are some serious issues with this board (WHEA, coil whine, issue with PCIe 4.0 and trouble reading NVMe drives etc.). Do you experience any issue up until now?
Hi! I'm actually part of the reddit thread and unfortunately, I can't give any more feedback on the Aorus board since I've already switched to Asus.
For now, I wouldn't recommend the z690i Aorus since it's speculated to have a hardware issue. Despite it's price, it's the worst board to get right now. A lot of people have been recommending the MSI z690i Unify instead and I've heard good things about it. I'm personally using an Asus z690i strix and I haven't had any type of issues so far.
@@Jelvin Thank you! What an unfortunate, I fricking love Gigabyte boards from last gen (Aorus B550i, Aorus X570, Z590i Vision), they look slick, well-built and affordable. Anyway, thanks for your advice! Imma get the MSI Unify 👍
@@truonghuy9611 I've always been using Aorus boards myself (been building PC's with Gigabyte for a long time now actually) but this has been a really bad experience for me. Also there's the Gigabyte PSU issue that wasn't dealt with properly so I've lost my trust with them already.
Wishing you good luck with your build! The MSI Unify is a good board. I would've gotten that board if only there was stock when I was planned to rebuild my PC.
@@Jelvin Thank you! Happy gaming bro! 💪💪💪
Wish I had read these comments sooner :( sending my board back for RMA, its gen4 is bonked
The LED strip comes together or u got it separately?
I got it separately. Came from an old build
I love this case so much, but the only letdown is the two fans below, u cant put normal sized fans, or else id definitely buy it
Yeah definitely. The single configuration might also be a dealbreaker.
do you need the Z690i or is the asus strix 660i also good with the i5-12600k with rtx 3070?
The B660i should work with the 12600k and 3070. It’s a good board IMO if you’re not gonna do any overclocking
Qual Monitor ?
Good to see a fellow Long sword hunter.
Have you tried Monster Hunter World on 3060Ti?
How is the performance?
Thanks.
Hey there fellow hunter! Yes and I absolutely love it. I actually played MHW with a 1660s until this build and a 3060Ti is more than enough for Max settings at 1080p.
Haven’t tested it on 1440p though but I have a new monitor coming in so I’ll probably test it out when it comes.
@@Jelvin ok. It sounds like MHW is not a very demanding game at least on 1080p.
I mainly play it on MHW on ps4. Might considering a pc for some mods.
Thanks.
@@tidusLiu The only thing that's gonna be a challenge is that you'll need to grind all over again since there's no cross-save functionality between platforms AFAIK. Other than that, it's a good experience playing MHW on the PC. +1 on the mods
@@Jelvin that sounds like hundreds of hours in grinding lands and jewel farming. Yeah……
Can you provide the reasoning for a i5 instead of i7 or i9 and the 3060 instead of 3080 or 3090? Is the box heat management not up for higher spec components? (sorry for these types of questions. Haven't built a pc since pentium 4 was a thing)
No worries! Simple reason is that parts are so expensive on my part of town that these are the ones that I could get last January without feeling guilty.
I would’ve went for an i7-12700k and a 3080ti if I had the money since those technically have decent temps with this case. I don’t think the AIO for this case is good enough for the 12900k so I would probably undervolt it hence my 12700k choice.
@@Jelvin still expensive......
@@jamesng40 Yup. Everything's expensive anyway. 🤷♂️
Most likely because going with those parts would increase the cost by $2,000-$3,000
@@Athasin Your point exactly.
I'd get an i9 and a 3080ti/3090 if I lived in the West but prices ramp up from where I live because of tax, shipping, and markup.
I did almost the same build you did in this video and I am having an issue, every time i plug the CPU to PSU cable, the build turns on, and turns off after 3 seconds. When I unplug the CPU to PSU cable, the build turns on and stays on. Any idea what am I doing wrong?
I'm sorry but I'm not sure if I understood your question. When you say CPU, do you mean your PC?
@Jelvin when I say CPU in my MOBO is the ATX_12V 8 pin connector
whats the chassis lighting that you used?
Phanteks Neon 👍
Damn it's a beautiful build. I'd love to make the same build but i just can't understand why ITX board are more expensive than ATX ? it has just one pci lane and too ram slots so it takes less compenents to produce but it's more expensive ?
Thank you! Really appreciate it. I can think of 3 things why it's a little bit more expensive: engineering, production, and demand.
Engineering - since it may take a lot of time to design a board that includes as many features as possible in a small board.
Production - Since it's still not a standard size among others like mATX, and ATX motherboards, allotting a separate production line just to come up with these boards will ramp up additional costs.
Demand - even up to this day, I still see people prefer the standard sized PCs since it's tried and tested. There's not really a huge demand for ITX motherboards unless you're really into it. Basic supply and demand.
@@Jelvin ok, you're totally right !! I was just comparing the two products not taking in consideration the production line and demand. Thank you :)
@@nickyyves2678 All good! Happy to share my thoughts.
How is the fit like between the AIO pipes and ram?
It’s just enough. I’ve heard that other AIOs will touch and bend the RAM like the EKWB Basic and NZXT Krakens. Would recommend doing a thorough scan of what people are talking about re: AIO compatibility before buying the part.
I found it at the tip
Is the only main difference that the nr200p is that it comes with a custom cpu cooler and vertical gpu stand cable?
It’s a little bit different. A couple differences are:
- layout accommodates the radiator at the top as opposed to being placed at the bottom.
- You can only mount the GPU vertically using the riser cable the comes with the kit
- There’s no side bracket option for another radiator in case you wanna do a dual rad set up
These are just some. I recommend watching Sheen’s(?) (Machines and More) video about this case here 👉 ua-cam.com/video/07OrIfaaprs/v-deo.html
Anyone know the male and model of the keyboard and wrist rest?
It's Keychron K3 with the K3 wrist rest.
What`s your screen brand and model ?Thanks😀
It’s an LG 29WL500. I suggest looking at the Ultra Gear line up since the monitor in the video is a little bit outdated 🙌
temps?
How’d you get hand on the MAX version?
I’m just lucky there was stock online from where I am 🤷 also, I honestly didn’t know that the case is always out of stock.
How many 4pin fan conector were going from the AIO?
Only two. One 4-pin was connected to a splitter to two fans and the other was for the pump block.
Wow! My dream built!!!! Btw, how much does it cost in total( I want to build one either lol ) ?
Around 2500USD after tax and markup :)
@@Jelvin ok thx
@@Jelvin I have one more question, is nr200p max a good itx case? I need a slighly bigger case:)
@@user-darkness0000 it’s enough for my use case at least. Also, I don’t have much desk space so I’m planning to move to a smaller case. If you need to get more airflow then a bigger case is the way to go.
How do I plug in the hd audiov port on the main?
You need to attach one of the included extension cables in the box.
Looks like the bottom fans are set to exhaust, where's your intake coming from?
As mentioned in the description, I’ve already changed my fan orientation.
how did you get the nr200 max I cant find it anywhere
Stocks are still available albeit limited here in the Philippines. Happy I got one when people started releasing here.. 🙌
what monitor did u use?
It’s an LG 29WL500. I would recommend getting an UltraGear ultrawide since the one on the video is only 75Hz
Bro can i use these parts on this motherboard
Heres the specs:
Rtx 3050
i5 12400f
ddrr5 16gb ram 4800mhz
650watt gold 80 plus power supply
1tb m.2 mv ssd
Nzxt itx mini pc case
Pls reply bro
🟥 TO ALL WHO BOUGHT THE Z690i rev 1.0 BOARD 🟥
Please note that Gigabyte announced an exchange/refund option on their website last 1st week of May 2022. Depending on where or how you bought it, you can process an exchange (to the PLUS version of the board) or a refund to your account. Fortunately, the store where I bought my original z690i board from was kind enough to process my request for a refund. Check out the exchange/refund option below:
member.aorus.com/global/z690i...
For future buyers of this board, please take note of the "PLUS" word on the print so you won't get the version with the PCIE issues. The "LITE" version of the board can only be set to PCIE 3.0.
Мне интересно, если он все вентиляторы на выдув поставил, то откуда система должно воздух сосать? С задний стенки, где нет пылевого фильтра?! Нужно было нижние на вдув поставить, тогда было бы логично...
Hi! I’ve already changed my configuration to top intake and bottom exhaust. But I didn’t have any problems with both top and bottom exhaust either; I actually followed the recommendation of Ali (OptimumTech) here in this build.
Check it out my build update here ua-cam.com/video/vsGnVbXp1Go/v-deo.html
Will this exact components fit on an nzxt h1 v2 case?
Except the PSU and AIO, I think it will. The GPU compartment on the H1v2 has a lot of space.
@@Jelvin but the PSU and AIO are already pre built (including the wirings) in an NZXT H1 V2 case.
5:45 which cable gonna connect this 4pin ?
There are converters included with the motherboard for 4 pin headers
@@Jelvin thanks bro, just got mine built up
For the fan config you did, you should`ve used the mesh side panel, not the TG.
For TG the best config would be, intakes bottom, horizontal GPU, AIO top exhausting (not ideal, since you're feeding hot air comming from the GPU.......... but better than now.)
The TG was just for the video. I've always been using the mesh panel ever since I finished the build. Also, I've updated my build already. ua-cam.com/video/vsGnVbXp1Go/v-deo.html
I also can't place the GPU horizontally since this is the MAX version. Not the standard NR200P.
do you have any gpu sagging problem?
Would probably sag if the GPU's heavy. The GPU that I had during the time of recording was fairly heavy but no sagging on my end.
how is the noise level of this build?
Sorry can't compare it now but the noise under full load wasn't that noticable 1.5 meters away from the PC
Hey Jelvin, what length Phantek Neon strip did you use here? 400, 550 or 1000? Thanks
Unfortunately, I threw away the packaging but the one that I have is the 1 meter on I think.
How much is the estimate for this build?
I spent around USD 2,500 when converted from my currency (including tax and markups)
Can i use (intel core i5-12600)
I don't want i5-12600k because it is expenseve.
Yes it should be compatible
Custom keyboard?
It's the Keychron K3v1
Hi bro can I use this pc for video editing...?
With the same specs, you can have pretty decent speeds for light editing. If you really need the bandwidth for video editing, IMO an OC'd 12700k or a 12900k is the way to go.
Top exhaust and bottom too...? xD
I updated my build already. 🤷♀️
Here's my updated build: ua-cam.com/video/vsGnVbXp1Go/v-deo.html
Also this configuration was a reco I got from OptimumTech and the temps were great either way.
They're more rare than GPU's
You’re talking about the case, no? I’m actually lucky that there’s a number of stock that came in (at least from where I live) so I took the chance to get it.
I dunno where you live but here in Germany it was so easy to buy one on MSRP.
@@MyKillyy You're pretty lucky. I live in the Philippines so it's a challenge to find stock for everything especially close to MSRP.
Included na po ba ung fans boss?
Fans included lang po sa Radiator. Not included yung kinabit ko sa bottom.
Top ands bottom exhaust?
As mentioned in the description, I’ve updated the fan orientation already. Either way, I had good temps even with that configuration.
@@Jelvin ok ok, I see… so top intake and bottom exhaust
@@estebaneordogh4564 yes. As recommended by Machines and More
What was the total cost of this beauty?
Around 2500USD when converted from PHP 💸
What monitor is that
lg 29wp500-b
hows your motherboard, i heard they have a lot issues.
I’ve already swapped my motherboard 😁 check out my video here: ua-cam.com/video/vsGnVbXp1Go/v-deo.html
@@Jelvin nice, i just watched it, did u swap due to issue? Or just upgrade??
@@rommelbautista6480 Yup! Swapped it because of the issues mainly but I made my build for long term usage so I'm not comfortable having the Aorus board.
They're also gonna recall the board because of an alleged hardware issue. 🤷♂️
@@Jelvin thanks for responding! Cheers!!
@@rommelbautista6480 all good! 🙌
Thermal ?
Idle
CPU - 30C
GPU - 40C
On Load
CPU temps ave 61C max 69C
GPU temps ave 66C max 71C
How much (Php) did you spend on this build sir?
Around 125,000? Prices were really really high during Jan/Feb 2022
@@Jelvin thanks sir 🙌🏼
What's the total build cost?
Around 2,500USD converted. Do note that I'm from the Philippines so prices are around 25% to 40% more expensive than it is. MSRP might be different from where you are.
8:07 what game, please?
Monster Hunter Rise ✌️
how much is this build bro? seems like expensive
This cost me around 2500USD back then (after conversion and taxes)
@@Jelvin I see you got a big budget on that build thanks
Can I put a i7 12900k on that mother board or nah
Yes you can definitely but most people undervolt it to keep temps at bay.
@@Jelvin oh ok thanks for letting me know