I learned the hard way not to break a filled waste barrel. Fortunately it was in a compact machine. Unfortunately that compact machine was unuseable thereafter
You might hate me, but the amount of times you said NOT to break a barrel if it has radiation in it makes me want to do it. A LOT. Good job I'm yet to unlock mekanism, I guess.
Not sure if this was mentioned, but if you right click with a configurator it shows you the problems. My problem was that i had an invisible magelight chilling around in the center of the structure
If it blew up, you definitely missed something. The things that can cause it to blow up: -Not enough coolant being pushed into the rector -not enough energy storage so the steam backfills into the reactor -chunk loading issues if you leave the reactor running, especially when offline The redstone contraption i show at the end of the video should fix all but the chunk loading issue though
another tip: the amount of vents is usually exaggerated, a 5x5x5 reactor like the one in this video, at it's max burn rate of 10mb/t, will boil 200000mb/t of water and produce that exact same amount of steam per tick. and, one vent on that turbine will handle 300000/t. *BUT! i recommend having two vents, and a dual channel for the coolant, because the ultimate pipe's TRANSFER RATE is 128000mb/t.* note that the PUMP RATE here doesn't matter, because the vents automatically eject, the pipe doesn't need to pump. however, an example where the pipes NEED TO PUMP, is, when you're pumping water from the cooking for blockhead's sink.
Para las personas hispanohablantes que hayan tenido problemas con su reactor: en el video no se explica pero una vez que la turbina alcanza su maximo de produccion de energia y se queda sin lugar para almacenarla el reactor se queda con su steam sobrecalentado y hace que el agua se consuma mas rapido, tienen que hacer un sistema de almacenamiento de energia con las celdas o induction cells de induccion para que la energia se vaya de la turbina y pueda funcionar correctamente de lo contrario se quemara mucha mas agua de la que le llega al reactor y este se quedara sin agua y explotara
Entonces es por eso que luego deja de funcionar "de la nada"? Porque ya me pasó una vez y casi me pasa otras 3 veces que la turbina deja de funcionar. Supe siempre que era problema de la turbina, pero creí que era algo como los condensadores o los dispersores, pero entonces ya entiendo que se trata de la energía cierto? GRACIAS!!!
here from sykkuno's nuclear reactor 👀 this is so well explained but super complicated, i dont know if i can make it lol!! thank you for the tutorial !!!!
Thank you! I would strongly encourage messing around with one, even if you just do it in creative. It's a lot of fun to build them and watch them explode 😅
I assumed I wouldn't either till I set up an ore quintuple machine and saw how bad my Powah was at keeping up. It was surprisingly simpler than I thought and what I built was bigger than what hell shows off here.
WARNING: At least in the 1.20.1 version, if the internal energy buffer of the turbine fills, the turbine will stop spinning and WILL NOT CONDENSATE WATER ANYMORE, and the system will run out of water and the reactor will overheat, no matter if it's set to idle, dumping excess, or dumping.
@@thewaytodrown8473 check the reactor's boil rate, and check if your pipes can handle the flow, the pipe's TRANSFER RATE, NOT PUMP RATE, should be greater than the boil rate. pressurized tubes have much greater transfer rate than mechanical pipes, so the bottleneck is likely coming from insufficient water returning from the turbine. if the reactor's boil rate exceeds the ultimate mechanical pipe's transfer rate/capacity, add a second channel, and on the turbine, make sure the max water output (from the condensators) and the max flow (disperses and vents, you probably have the 8 disperses around the rotational complex so it would likely be the vents) are greater than the boil rate of the reactor
Great video, it helped me a lot! In my case, I had to add one sink for every 1mb/t. For example: 15mb/t = 15 sink to make it work and not explode. Playing on the FTB Direwolf20 1.19.2 modpack!
That's an insane amount of sinks! Once its full, it should have enough fluids to be endless as long as you have enough saturating condensers because there's nowhere for the water to go 🤔
the bottleneck is not the sink, the sink makes literally infinite water/t, it's the pump rate of the pipes. so you can just connect more pipes to the same sink
It is IMPORTANT to use all 4 shutdown conditions: temp waste output and INTEGRITY Some random enderman dropped a block in my induction battery and nulled it, then my turbine filled up and my max fission reactor blew up😢
Thank you for a good tutorial :) I set up a fission reactor to produce polonium pellets. I had 2 explosions of the fission reactor so far, and more to come. 1st time it happened because of coolant shortage (water cooling). I didn't have enough saturating condensers in the turbine, so i had to build a few more levels higher to keep up with the demand. 2nd time it happened when i hooked up SPS. This happened because of internal storage of energy of the SPS got full, and therefore the turbines storage also stacked up and therefore it stopped producing enough water for the fission reactor. The SPS stopped when it didn't get enough polonium which is only produced at day with the solar neutron activator. Resistive heaters is a good option to waste all the energy that the turbine generates so it's always producing enough water for the fission reactor. If producing polonium pellets is the goal.
I always end up with this exact situation: Turning the machine off right before it gets dammaged from a lack of water, due to the heat rises so fast. Do I set the turbine to "dumping", "dumping acces" or "idle"? And how on earth, can i "set it and forget it" so that it doesn't overheat so easely. Perhaps you could do a video simplifying the COOLING PROCCESS for absolute idiots when it comes to this subject *like me lmao*
As long as you have enough energy storage (so the steam doesn't back up) and you have enough saturating condensers and pump the water back into the reactor then it shouldn't explode. The big one is making sure you have some sort of overflow to dump the excess energy. Dump excess might work but I've found it's not 100 % so I just add either a huge battery or some sort of energy trashcan as a safety measure
you should do a part 2 of this video for two topics. Topic one, how to make an energy excess drainage system to avoid a meltdown due to energy not being used/stored. and Topic two, how to safely empty or move the radioactive waste bin connected to the reactor. I am not knowledgeable enough in the mod to know but I really want to make this thing and can't after seeing all the comments lol. I do not want to blow up my base.
haha don't worry! All you need to do with the nuclear waste is pump it into another waste bin and hide it somewhere, or if you're going down the antimatter route, process it that way :) I do have a guide on fusion and antimatter that would help with that one! In terms of the energy, any sort of annihilator, trashcan or even making an induction matrix which is big enough would work super well!
Thanks for the help! I'm using this soon in Create: Mekanized, but I have one question: Why bother deactivating the secondary coolant line in the first place, instead of always leaving it running?
That makes sense! And thanks for the quick reply, I was worried I had missed something. Glad my fission reactor won't melt down on me any time soon! :)
So how would you get the energy out and store it inside an infusion matrix? I have the matrix done with ultimate provider and energy cube but would ender cells from Powah transfer the energy?
I'm having some troubles with the yellow cake uranium. I'm trying to use refined storage to auto-craft them, but my crafting monitor says that "no machine is found". The crafter is connected to the enriching machine and it works for other enriched things - yellow cake uranium is the only thing that it can't find the machine for. Any ideas on what the issue could be? Oh and btw, great video!;)
Thanks! It should just be an enrichment chamber. I've not tried connecting RS up to it so I'm not sure why it wouldn't pick it up. Have you tried outside of RS to see if it works?
This was a great tutorial, however people need to know that this uses so much water that one line of ultimate mechanical pipe is not enough. It is better to completely fill in between the reactor and the turbine with ultimate mechanical pipes and add more valves to the reactor if you want to have it be at a rated speed of more than 1mb/t.
Just a reminder here, make a HUGE place to store all the nuclear trash and make SURE, your barrels are NEVER full, because none of the other alarms will function if evertything is fine but the compartment is full, my reactor just exploded even when everything else was completely fine, later I found out that if the barrels get full, it will also explode, please put a reminder like this one in your video, it's very frustrating, even more because I was playing on a server with other friends.
@@Ishanttomar-bx3wg basically, I figured it out, but you wont be happy about it: first you need an electrolytic seperator, fill it with water, get the O2 from it into an pressurized reaction chamber, add water and coal, get the sulfur dust with some fluorite into an chemical dissolution chamber, and put that outcome into an chemical infuser, then youll also need an enrichment chamber where you put uranium inside, get the outcome into an chemical oxidizer, and mix the outcome from that into the chemical infuser, and fill the product into an isotopic centrifuge. The outcome from that thing is the fuel. And that stuff goes in over the green fission reactor port
Well, I wasn't checking the temperature and apparently these things tend to explode at like %200 damage or a little bit over that. Good thing I had a backup.
For some reason nothing happens when I activate my Fission reactor : the burning rate stays at 0 mb/t even if I increase the rate limit in the stats. Any idea ?
I know this was posted years ago so things might have changed, but i have tried everything i can think of to change the block from input to waste. It only seems to cycle through input and output coolant and output steam, and pipes wont connect?
i followed this exactly and the turbine is just not turning on, i’ve tried reactor glass structural glass i’ve re built it, i can build the fission reactor fine but the turbine doesn’t work at all, anyone know why?(version 1.18.2)
currently playing on ftb direwolf 1.20 and im building this, i have it built up until the water being filled up. i have the pipe against the sink but it wont actually connect and produce water, what mod was the sink in the video? the one in the modpack is CookingForBlockHeads?
I have the turbine and reactor built but I went to go make the fuel and in order to get uranium long story short it’s luck to come across a toxic cave. Natures compass doesn’t work need the cave tablet in order to find a tablet you find it in a unground cabin. How you find an underground cabin luck. Then when you find tablet you have to decrypt it. Without braking it. So it’s 100% luck if you find a tablet and 100% luck if you decrypt it. Then and only then can you find the toxic caves biome. That doesn’t include making hazmat suits so you don’t die. I am on valhesia 6 mod pack. Really could use some help bc there is no way I did all this work just for uranium to be 100% luck to stumble upon even when looking for the things you need.
There are 777 likes on this video, so I will instead leave a positive comment 🤣 Thanks for the tutorial! I definitely need to see if I can increase the power output of my turbine (142.81kFE/t) with hopefully the same burn rate of fuel (5mB/t) because I have to say I'm disappointed. I can use 6 PRC's running bio fuel from crushed melon slices (infinite obviously) and make more power than burning Uranium 😒
Thank you! You can definitely make that a lot more efficient, check the bottlenecks on your turbine and make a couple of tweaks and I reckon you can 10x that quite easily
My reactor isn't working because there's no power coming in, but I followed it step by step and the power doesn't work, I have enough power and I've already redone it about 30 times, can someone help me?
Im having the same issue. I have every step done and triple checked. I even filled an ultimate energy cube and tried powering it that way, still doesnt turn on. He didn't show him powering it on with the energy cube so im assuming he might have used the configurator to change the way it connects to the turbine valve. not sure though
Are you getting a burn rate at all? Cause im not, so im assuming the turbine and reactor both dont work for me although i can open both gui's@@chamate2370
What is a boiler for then? I thought I could make a boiler to power the turbine, but it requires more power to heat the boiler than I get power from the reactor in form of steam.
Do you plan to cover the induction matrix? Right now I am finding my matrix is insufficient to handle the power the turbine is making. I am using water coolant too, but maybe a water VS sodium coolant part 2 would be good too. I am now building my SPS and looking into the fusion reactor too.
I hadn't planned on doing the induction matrix but maybe in the future. I am planning on covering fusion (it was meant to be in this video but it would have just been too much) so there's definitely room to expand
@@Hellfirem4ge the reason I asked about induction is I have heard that if the turbine can't output power and fills up then coolant can't flow into it leading to the reactor overheating. So the induction matrix is a power buffer
@@sirhugobigdog oh yeah, I'm aware, it was the cause of my very first reactor meltdown 😅 I'll definitely look at it but I'm not fully sure what extra I can add to it but we can see ☺️
@@sirhugobigdogbest way to ensure this never happens is that your induction matrix is way oversized for your usecase. May Induction matrix has 200Tfe of Capacity. That should keep it running a while. And when you have the Sps then your storage filling up will never be a problem anymore...
So with the induction matrix if you do say a 5x5x5 you only need 4 providers and the rest will be cells. I always recommend that you slowly turn up your reactor in increments of 5 till you hit the threshold of your whole system. Also remember ditch the pipes and go port to port. That way your transfer rate is throttled by your pipes. The ports will transfer at a unlimited rate.
I followed every steps 2 times and it blowed up each times , i really dont know what im doing wrong i set the fission reactor to 0.3 so it doesn't absorb too much water beacause i dont have the sink like you have so im using water pump and i need a lot of them and i added some waste barrel in case , after 5minute trying to build the setup for the fuel i turn around and it was all explode , The mod Mekanism was really fun until this part , maybe you should use something else other than the sink next time so people dont have to struggle with a other solution ?
My turbines never spun, it overheated and blew up. I wounder if it matters what hose upgrade you use and I would love to know the power source to use cause every "How to" uses source blocks not in survival for power.
You definitely need a lot of strong pumps to keep up with the reactor, it burns through a lot of water, but as long as it's completely full before you turn it on, and you refill it once when it is on, it should make an infinite loop. It sounds like you didn't give it enough time to fill up fully
hey, i made my fission reactor, filling it up with 6 electric pumps with speed upgrades, after that i made the turbine and connected it to the coolant, it's receiveing a lot of steam but even with the electric pumps and the water output of the turbine i can't use the reactor above a 0.3 burn rate, otherwise it goes out of water. it's been 3 days that i'm having this problem and i literally can't solve
@@gutty1988 sorry, I mean do you have pipes coming from the vents in your turbine to pull the water out and back into the reactor? That way you should have an endless loop of cooling
@@gutty1988 do you have enough condsensers in the turbine? Is the flow rate of the pipes from the turbine high enough? There's a few things like that which can affect it, but I know I can run at around 15 with the setup I have without running out of coolant
Have you checked that they're configured to pull from the water source and that the reactor is completed and the UI comes up? Those are the most common ones :)
@@Hellfirem4ge now i have a different problem, im currently playing on my multiplayer server with my friend and the chemical tank wont output the fissile fuel for some reason, i have tried using better pressurized pipes and changing the input/outputs of the pipes and chemical tank, any idea why?
I configured my turbine and reactor exactly how you did before going into discussing fissile fuel. All the coolant is connected from a body of water as it should be, and is connected where it needs to go. My coolant ran out a minute into running the machines. Why is that?
@@Hellfirem4geIs the reactor supposed to be full of water? I thought I was supposed to wait until the reactor is full of water, then the vapor gets put in the turbine through the pressurized tube on the bottom. Im using ultra quality mechanical tubing to pump water into reactor using a pump that is speed modified and everything, but the reactor takes foreverrrrrr to fill up when it runs out of coolant.
@@mossghitsli6983 yes, it definitely needs to be full of water when the turbine is full and then you'll have a system that never needs the water replacing, but if you just turn the coolant into steam, there'll be no coolant left to cool the reactor ☺️
I figured it out and got it working. I ramped up the burn rate of the reactor by 2, would let the water flow back in, then turned it up more. It worked for about 4 minutes but then started overheating at burn rate of 12 or 13. Hit the scram button, and saw the temp creep back down. The reactor was receiving constant damage and I couldnt figure out how to stop it and it blew up. Since this is a shared personal server, I begrudgingly reverted the world to a backup save from 3 hours prior. This undid my mistake of it blowing up. Sadly, it also undid my awesome implementation of the fissile fuel refinery chain. What I wanna know is what caused the reactor to blow even after I turned it off? Was it backpressure from the water or vapors? I had the turbine set to IDLE instead of DUMP EXCESS so idk if that matters. @@Hellfirem4ge
@@mossghitsli6983 so as soon as the temperature gets too high, the damage will keep ramping up until you inject some emergency coolant to bring the temperature back down, so even if you hit scram, it can still blow up. That's why I set up the emergency coolant system at the end of the video to stop that happening ☺️ I would make sure you also have enough energy storage, that causes a lot of issues if you don't dump the excess energy because the steam goes back into the reactor and raises the temperature like crazy!
Just on the first part and I built everything correctly and when I right click it won’t give me the interface. Im also confused by “closed your door with glass” meaning place the last two glass pieces last?
So quick question? I built the while thing right… now i dont quite know where i would put my Flux plug or some thing like that to use the energy produced?
@@Hellfirem4ge i tried the 2 mekanism ports but it still didnt work… also the reactor blew up( ive been running it at .1 and even with 20 sinks connected the water still went down extremely fast, so im confused there)
im stuck making the turbine. apparently i need a "Rotor bearing" made a few but cant figure where i need to put it. nor can i find anywhere online (at least for the last 2 days of looking) that can help me
set it up exactly how you did in your video. and that when i got a notice when i right clicked the turbine i got a message saying "Turbines require exactly one bearing"
Figured out the bearing thing. Was from another mod that I didn't uninstall completely. Did a fresh install and new save. But still having issues with the turbine. Built it exactly as you have here as a test run and it doesn't light up
is there a reason my turbine reactor won't accept power? i have connected universal cable and it does not have any power, my guess is that it has so little that it doesn't show
@reggerdernoobs2678 I would recommend filling some tanks with water from mekanism and pumping it in. Start the reactor on a low level and slowly increase it until you have your infinite loop
Just made (almost) the entire thing like the tutorial said it, but for some reason, the tirbine isnt working while the reactor itself does (no interface). Im so confused about it. Any idea what I couldve made wrong?
Normally the issues are: - It's too tall (fans don't fit) - The configuration of the magnet and motor is wrong - there's a random glass block inside the reactor or an input missing Beyond that it's kinda trial and error tbh. Make sure your modpack doesn't need structural glass too
Just figured out, that I used the wrong blocks, since I didnt foznd the needed Block in the creative inventory for Mekansim at the turbine parts. Fixed it and it worked
Didn't mention it, but should advise people to not try to be smart and use sticky pistons on the reactor failsafes -- if anything goes wrong with reactor you don't want it to clear and reset on it's own. Very likely to then fault, reset, then blow up from same state if it was already damage from first fault. You can make the reactor almost never have to turn off/fail if you put 2 extra valves on the turbine. Put comparator on one that will output the steam level and the other you put a resistive heater that requires a redstone signal and is set to like 10-100 times your turbine's output. Anytime steam fills up it can run the heater to bleed some energy, so reactor never loses coolant loop when turbine self slows from energy/steam being full.
you have your setup wrong. dont put pipes between the turbine and reactor. go port to port. will run and work 10x better. thats the way the devs designed it. that way you dont need to supply it with coolant once you turn it on even at max level
If you may I have another question I was wondering how you got the water to fill up the fission reactor so fast is there another pump besides the regular pump because originally, I used 32 pumps and I only just a little bit of coolant.
@@antsforever1356 I think in the video I used mekanism pipes and a sink from cooking with blockheads but having a lot of pumps is probably the way to go with normal mekanism. Thankfully you don't lose water over time so you only need to fill it once
@@Hellfirem4ge isnt that good tho? i think im missing something. cuz it will only reset itself when the problem is resolved? so then it goes back on and if something goes wrong again it will stop it again. or am i forgetting something?
If everything goes well then yes. The problem is that with chunk loading etc, stuff doesn't always work perfectly. You should be aiming for the system to never go off, rather than have it go off and reset
@@Hellfirem4ge right now im running into the issue that the second i turn it on it just eats ALL the water and doesnt replenish enough. im using the electric pump from mekanism with speed upgrades. did i do something wrong?
So if you set it up correctly, you don't actually need to be pumping any more water in, so you could use that setup to fill the reactor, it would just take a long while. Just make sure that you turn it on, wait for the water level to drop, then turn it off and fill it up again to keep it flowing 😊
I’m having an issue where I can see both the turbine and reactors interface but when I activate the reactor, there is no burn rate or heating rate. Nothing happens. I’ve looked through the comments and found the structural glass switch from reactor glass for the turbine and it hasn’t helped. My coolant tank is filled with water all the way. I have everything connected with the correct cables, my reactor ports are configured to the right setting. I have the second turbine valve connected to an ultimate energy cube for power. Still nothing. Any help? Thanks
@@Hellfirem4ge actually, i just rewatched your video. And saw that the moment your reactor turned on, there was fissile fuel in your fuel tank. Did I completely miss that part? I need to have fissile fuel in the ultimate fuel tank in order for it to work?
Hey @Hellfirem4ge i need help on one more thing. I put together all the machines to create the fissile fuel with all the logistical, mechanical, and pressurized pipes. But it seems in your setup, you dont have any universal cables for power. Are they underground in your setup? Not sure if you even need the power. Thanks in advance
If you have mekanism installed, there should just be ore underground. The main thing to check though is that the chunks were loaded after mekanism was installed or it won't work
This information was used with the sole intention of making nuclear waste, it is a very potent weapon. Thank you, sir.
I cannot be held responsible for how it is used 😅
Lmao! That's exactly why I'm doing this! It's needed for my mekasuit
Tested this in creative, filled about 20 ultimate cubes instantly
Flint Michigan moment
Bro, just download the mekanism explosives mod 🗿🗿
I learned the hard way not to break a filled waste barrel. Fortunately it was in a compact machine. Unfortunately that compact machine was unuseable thereafter
I mean to be sir radiation does dissapate after about 12 hours
12 hours in game or real time?@@justsomeguywithahandlebarm2456
@@justsomeguywithahandlebarm2456Or 36 in-game days
just hook up a liquid void or trash can
You might hate me, but the amount of times you said NOT to break a barrel if it has radiation in it makes me want to do it. A LOT. Good job I'm yet to unlock mekanism, I guess.
Do it at your own peril 😅 don't say I didn't warn you
@@Hellfirem4geI mean it’s not like you can get radiation poisoning in minecraft!
Not sure if this was mentioned, but if you right click with a configurator it shows you the problems. My problem was that i had an invisible magelight chilling around in the center of the structure
OMG thank you haha i didn't think to look inside the machine haha
Lifesaver
come here because of Sykkuno's Nuke Reactor build. want to watch the real tutorial to make one for myself KEKW
Glad to have you ☺️ still can't believe how supportive he was of the guide!
The end is so unexpected 😂 I thought it would make a big explosion 🤪
I was shocked too 🤣
Followed your instructions very precisely and my base blew up
If it blew up, you definitely missed something.
The things that can cause it to blow up:
-Not enough coolant being pushed into the rector
-not enough energy storage so the steam backfills into the reactor
-chunk loading issues if you leave the reactor running, especially when offline
The redstone contraption i show at the end of the video should fix all but the chunk loading issue though
@@Hellfirem4ge thank you :)
When I built mine found out it was an energy issue built a Resistive heater set it to max and have been running the reactor at 100% with no issues.
I’ve found it! Syk’s new project lol
No other guide i'd watched mentioned those panels, you are a godsend for mentioning it
another tip: the amount of vents is usually exaggerated, a 5x5x5 reactor like the one in this video, at it's max burn rate of 10mb/t, will boil 200000mb/t of water and produce that exact same amount of steam per tick. and, one vent on that turbine will handle 300000/t. *BUT! i recommend having two vents, and a dual channel for the coolant, because the ultimate pipe's TRANSFER RATE is 128000mb/t.* note that the PUMP RATE here doesn't matter, because the vents automatically eject, the pipe doesn't need to pump. however, an example where the pipes NEED TO PUMP, is, when you're pumping water from the cooking for blockhead's sink.
in some versions of mekanism, reactor glass does not work in turbine thing, u need to use structural glass
i ran into that issue while i was building my turbine :/
Para las personas hispanohablantes que hayan tenido problemas con su reactor: en el video no se explica pero una vez que la turbina alcanza su maximo de produccion de energia y se queda sin lugar para almacenarla el reactor se queda con su steam sobrecalentado y hace que el agua se consuma mas rapido, tienen que hacer un sistema de almacenamiento de energia con las celdas o induction cells de induccion para que la energia se vaya de la turbina y pueda funcionar correctamente de lo contrario se quemara mucha mas agua de la que le llega al reactor y este se quedara sin agua y explotara
Me salvaste la vida gracias!
Entonces es por eso que luego deja de funcionar "de la nada"? Porque ya me pasó una vez y casi me pasa otras 3 veces que la turbina deja de funcionar. Supe siempre que era problema de la turbina, pero creí que era algo como los condensadores o los dispersores, pero entonces ya entiendo que se trata de la energía cierto? GRACIAS!!!
@@alphezoplay6502 Me alegro haberte ayudado😁😁
Comming from syks live, what a detailed guide! Sadly I dont relly get it, but the people interested in it, can definitely do it step by step😊
here from sykkuno's nuclear reactor 👀 this is so well explained but super complicated, i dont know if i can make it lol!! thank you for the tutorial !!!!
If sykkuno can do it, I'm sure you can! ☺️
a year later this video still helps a ton ❤ (though I thought I won't need a failsafe.. I was wrong)
Did I know what the reactor was? No. Will I ever get far enough through mek to use? No. But hey it was an interesting video, good job Hell
Thank you! I would strongly encourage messing around with one, even if you just do it in creative. It's a lot of fun to build them and watch them explode 😅
I assumed I wouldn't either till I set up an ore quintuple machine and saw how bad my Powah was at keeping up. It was surprisingly simpler than I thought and what I built was bigger than what hell shows off here.
@@sirhugobigdog yeah it scales super easily ☺️
@@sirhugobigdogi just started the cool machines in mekanism and the insane smelting factories need so much power
WARNING: At least in the 1.20.1 version, if the internal energy buffer of the turbine fills, the turbine will stop spinning and WILL NOT CONDENSATE WATER ANYMORE, and the system will run out of water and the reactor will overheat, no matter if it's set to idle, dumping excess, or dumping.
Wait im playing on 1.18.2 and my reactor is overheating what do I do?
@@thewaytodrown8473 check the reactor's boil rate, and check if your pipes can handle the flow, the pipe's TRANSFER RATE, NOT PUMP RATE, should be greater than the boil rate. pressurized tubes have much greater transfer rate than mechanical pipes, so the bottleneck is likely coming from insufficient water returning from the turbine. if the reactor's boil rate exceeds the ultimate mechanical pipe's transfer rate/capacity, add a second channel, and on the turbine, make sure the max water output (from the condensators) and the max flow (disperses and vents, you probably have the 8 disperses around the rotational complex so it would likely be the vents) are greater than the boil rate of the reactor
test the theory out can confirm 250% damage has been made.
@@zacharybravo8201 the turbine filling up is the most common cause of mekanism meltdowns. happy new year btw
Great video, it helped me a lot! In my case, I had to add one sink for every 1mb/t. For example: 15mb/t = 15 sink to make it work and not explode. Playing on the FTB Direwolf20 1.19.2 modpack!
That's an insane amount of sinks! Once its full, it should have enough fluids to be endless as long as you have enough saturating condensers because there's nowhere for the water to go 🤔
the bottleneck is not the sink, the sink makes literally infinite water/t, it's the pump rate of the pipes. so you can just connect more pipes to the same sink
It is IMPORTANT to use all 4 shutdown conditions: temp waste output and INTEGRITY
Some random enderman dropped a block in my induction battery and nulled it, then my turbine filled up and my max fission reactor blew up😢
Thank you for a good tutorial :)
I set up a fission reactor to produce polonium pellets.
I had 2 explosions of the fission reactor so far, and more to come.
1st time it happened because of coolant shortage (water cooling). I didn't have enough saturating condensers in the turbine, so i had to build a few more levels higher to keep up with the demand.
2nd time it happened when i hooked up SPS. This happened because of internal storage of energy of the SPS got full, and therefore the turbines storage also stacked up and therefore it stopped producing enough water for the fission reactor. The SPS stopped when it didn't get enough polonium which is only produced at day with the solar neutron activator.
Resistive heaters is a good option to waste all the energy that the turbine generates so it's always producing enough water for the fission reactor. If producing polonium pellets is the goal.
Very true! I just use trashcans for the overflow honestly ☺️
Sadly there is no trash cans in Valhelsia 5 mod pack :) Also no kitchen sinks for the water
@@calipash8012 aww that sucks! Guess you just gotta make sure you have a backup reservoir somewhere ☺️
Note to other people. Do not use a creative fluid tank to input the water, it just don't pump it in.
It does if you set the extraction correctly
@@Hellfirem4ge What does one have to do differently, when compared to a sink?
man i followed this build guide two times and two time my reactor blew up
I always end up with this exact situation:
Turning the machine off right before it gets dammaged from a lack of water, due to the heat rises so fast. Do I set the turbine to "dumping", "dumping acces" or "idle"? And how on earth, can i "set it and forget it" so that it doesn't overheat so easely. Perhaps you could do a video simplifying the COOLING PROCCESS for absolute idiots when it comes to this subject *like me lmao*
As long as you have enough energy storage (so the steam doesn't back up) and you have enough saturating condensers and pump the water back into the reactor then it shouldn't explode. The big one is making sure you have some sort of overflow to dump the excess energy. Dump excess might work but I've found it's not 100 % so I just add either a huge battery or some sort of energy trashcan as a safety measure
Saving me already second time. I guess i ll be coming more often to this video in the future :).
Thanks 😊 hopefully you'll get a bunch of help from the other guides too!
you should do a part 2 of this video for two topics. Topic one, how to make an energy excess drainage system to avoid a meltdown due to energy not being used/stored. and Topic two, how to safely empty or move the radioactive waste bin connected to the reactor. I am not knowledgeable enough in the mod to know but I really want to make this thing and can't after seeing all the comments lol. I do not want to blow up my base.
haha don't worry! All you need to do with the nuclear waste is pump it into another waste bin and hide it somewhere, or if you're going down the antimatter route, process it that way :) I do have a guide on fusion and antimatter that would help with that one!
In terms of the energy, any sort of annihilator, trashcan or even making an induction matrix which is big enough would work super well!
a year late to the party but this video helped me so much!!
I did exactly what you did, when I came back to my base it exploded
very nice simple introduction
Thanks for the help! I'm using this soon in Create: Mekanized, but I have one question: Why bother deactivating the secondary coolant line in the first place, instead of always leaving it running?
You can leave it running if you want to, it's just in case you don't have an unlimited amount of fluid stockpiled
That makes sense! And thanks for the quick reply, I was worried I had missed something. Glad my fission reactor won't melt down on me any time soon! :)
So how would you get the energy out and store it inside an infusion matrix? I have the matrix done with ultimate provider and energy cube but would ender cells from Powah transfer the energy?
I'm having some troubles with the yellow cake uranium. I'm trying to use refined storage to auto-craft them, but my crafting monitor says that "no machine is found". The crafter is connected to the enriching machine and it works for other enriched things - yellow cake uranium is the only thing that it can't find the machine for. Any ideas on what the issue could be?
Oh and btw, great video!;)
Thanks! It should just be an enrichment chamber. I've not tried connecting RS up to it so I'm not sure why it wouldn't pick it up. Have you tried outside of RS to see if it works?
I have my crafter with a cheat in front comected to the enrochment chamber then an imported on the enrichment chamber the the system
This was a great tutorial, however people need to know that this uses so much water that one line of ultimate mechanical pipe is not enough. It is better to completely fill in between the reactor and the turbine with ultimate mechanical pipes and add more valves to the reactor if you want to have it be at a rated speed of more than 1mb/t.
Just a reminder here, make a HUGE place to store all the nuclear trash and make SURE, your barrels are NEVER full, because none of the other alarms will function if evertything is fine but the compartment is full, my reactor just exploded even when everything else was completely fine, later I found out that if the barrels get full, it will also explode, please put a reminder like this one in your video, it's very frustrating, even more because I was playing on a server with other friends.
What pipes are you using? I can’t get anything to connect when trying to make the fissile fuel. There’s multiple pipes in the video it seems
So for most of them you need ones that transfer gas, so the pressurized tubes but some things need normal pipes
@@Hellfirem4ge I’m using mechanical pipes and pressure pipes but I can’t get either to connect to the enrichment chamber
Make sure the configuration is set correctly in the enrichment chamber. It allows you to restrict which sides things can go into
@@Hellfirem4ge it’s the logistical transporter tubes! I found them. Thank you!
Can you make a video on how to make fissile fuel. Im having some trouble😅
If you check out my create Mekanized overview, I go over it in quite a bit of detail in that 😊
hey i loved the tutorial and have used it a few times already, i wanted to know what you were using to get those hazard stripe blocks?
can you tell me how to add fuel in reactor
@@Ishanttomar-bx3wg basically, I figured it out, but you wont be happy about it: first you need an electrolytic seperator, fill it with water, get the O2 from it into an pressurized reaction chamber, add water and coal, get the sulfur dust with some fluorite into an chemical dissolution chamber, and put that outcome into an chemical infuser, then youll also need an enrichment chamber where you put uranium inside, get the outcome into an chemical oxidizer, and mix the outcome from that into the chemical infuser, and fill the product into an isotopic centrifuge. The outcome from that thing is the fuel. And that stuff goes in over the green fission reactor port
if i have a bigger reactor than turbine will something bad happen - if so do i just make big reactor and big turbine
i might have made it to big do you know of any size limits because mine is about 9x9x18
I know this video is a bit old now but...do more condensers mean better flow on a bigger reactor?
Basically yeah 😊
Would this be compatable with the create mod?
How did you connect the sink to the pipes?
Well, I wasn't checking the temperature and apparently these things tend to explode at like %200 damage or a little bit over that. Good thing I had a backup.
Don't worry, it's happened to all of us!
Also, I can't really use it because i'm not using nearly half of the energy this thing ever produces.
For some reason nothing happens when I activate my Fission reactor : the burning rate stays at 0 mb/t even if I increase the rate limit in the stats. Any idea ?
I've not heard of that one before, does it have enough fuel going into it?
Quick question can you build a reactor in a radiation filled area?
I'll be honest.. I've never tried 😅
Is the turbine blade in another part of the mod ? Because i've installed mekanism mod and i can't find the blades..
me: i dont need all that safety equipment
also me: entire base radiated and there is a crater standing where my 6 hours of work was
Don't say I didn't warn you 😅
I rebuilt everything exactly but the turbine doesn't work
I know this was posted years ago so things might have changed, but i have tried everything i can think of to change the block from input to waste. It only seems to cycle through input and output coolant and output steam, and pipes wont connect?
instead of using boiler valves, use fission reactor ports
@@flimpooper5271 Thank you
@@jamesvaughan4597 👍
i followed this exactly and the turbine is just not turning on, i’ve tried reactor glass structural glass i’ve re built it, i can build the fission reactor fine but the turbine doesn’t work at all, anyone know why?(version 1.18.2)
currently playing on ftb direwolf 1.20 and im building this, i have it built up until the water being filled up. i have the pipe against the sink but it wont actually connect and produce water, what mod was the sink in the video? the one in the modpack is CookingForBlockHeads?
that's the one :)
@@girafferadiation hello, this is obviously been a bit, I figured it out, never realized that the pipe from mekanism had to be put to input.
Thx for this such a detailed guide
Does the reactor part have to be a perfect square? So say 12x12x12?
I believe so but I could be wrong 😅
I have the turbine and reactor built but I went to go make the fuel and in order to get uranium long story short it’s luck to come across a toxic cave. Natures compass doesn’t work need the cave tablet in order to find a tablet you find it in a unground cabin. How you find an underground cabin luck. Then when you find tablet you have to decrypt it. Without braking it. So it’s 100% luck if you find a tablet and 100% luck if you decrypt it. Then and only then can you find the toxic caves biome. That doesn’t include making hazmat suits so you don’t die. I am on valhesia 6 mod pack. Really could use some help bc there is no way I did all this work just for uranium to be 100% luck to stumble upon even when looking for the things you need.
I'll be honest, I've never played valhesia so I'm not sure how to help on that one as most of that is modpack specific and not really base mekanism 😊
what is that thing that you used to get infinite water source?
Just a sink
@@HadyM Thankyou lol, I just figured it out like a while after
There are 777 likes on this video, so I will instead leave a positive comment 🤣
Thanks for the tutorial! I definitely need to see if I can increase the power output of my turbine (142.81kFE/t) with hopefully the same burn rate of fuel (5mB/t) because I have to say I'm disappointed. I can use 6 PRC's running bio fuel from crushed melon slices (infinite obviously) and make more power than burning Uranium 😒
Thank you! You can definitely make that a lot more efficient, check the bottlenecks on your turbine and make a couple of tweaks and I reckon you can 10x that quite easily
My reactor isn't working because there's no power coming in, but I followed it step by step and the power doesn't work, I have enough power and I've already redone it about 30 times, can someone help me?
Im having the same issue. I have every step done and triple checked. I even filled an ultimate energy cube and tried powering it that way, still doesnt turn on. He didn't show him powering it on with the energy cube so im assuming he might have used the configurator to change the way it connects to the turbine valve. not sure though
@@Voundier i just put steam on it and it works, the power dont show btw, ATM7 to the sky version
Are you getting a burn rate at all? Cause im not, so im assuming the turbine and reactor both dont work for me although i can open both gui's@@chamate2370
@@chamate2370what power are u guys yapping about, the fission reactor makes steam which goes into the turbine which produces energy from the steam
What is a boiler for then? I thought I could make a boiler to power the turbine, but it requires more power to heat the boiler than I get power from the reactor in form of steam.
You can also use a boiler but it doesn't produce nearly as much energy ☺️
Guys, what is the thing used between the reactor and the turbine on the bottom? the thing connected to the coolant output, cause idk what to put there
Hi! im still watching the video. My english level isnt very good so i have a question. Can i expand the turbine higher? Sorry for bad english
Yes you can but you also need to make it wider if you want to add more turbine blades 😊
it did not work for me with reactor glas, i used structure glas and it was perfect
Do you plan to cover the induction matrix? Right now I am finding my matrix is insufficient to handle the power the turbine is making.
I am using water coolant too, but maybe a water VS sodium coolant part 2 would be good too.
I am now building my SPS and looking into the fusion reactor too.
I hadn't planned on doing the induction matrix but maybe in the future. I am planning on covering fusion (it was meant to be in this video but it would have just been too much) so there's definitely room to expand
@@Hellfirem4ge the reason I asked about induction is I have heard that if the turbine can't output power and fills up then coolant can't flow into it leading to the reactor overheating. So the induction matrix is a power buffer
@@sirhugobigdog oh yeah, I'm aware, it was the cause of my very first reactor meltdown 😅 I'll definitely look at it but I'm not fully sure what extra I can add to it but we can see ☺️
@@sirhugobigdogbest way to ensure this never happens is that your induction matrix is way oversized for your usecase. May Induction matrix has 200Tfe of Capacity. That should keep it running a while. And when you have the Sps then your storage filling up will never be a problem anymore...
So with the induction matrix if you do say a 5x5x5 you only need 4 providers and the rest will be cells. I always recommend that you slowly turn up your reactor in increments of 5 till you hit the threshold of your whole system. Also remember ditch the pipes and go port to port. That way your transfer rate is throttled by your pipes. The ports will transfer at a unlimited rate.
I followed every steps 2 times and it blowed up each times , i really dont know what im doing wrong i set the fission reactor to 0.3 so it doesn't absorb too much water beacause i dont have the sink like you have so im using water pump and i need a lot of them and i added some waste barrel in case , after 5minute trying to build the setup for the fuel i turn around and it was all explode , The mod Mekanism was really fun until this part , maybe you should use something else other than the sink next time so people dont have to struggle with a other solution ?
Before it blows up, is there still water in the reactor? Chances are you're overflowing energy if there is still water there
Could you hypothetically put the output waste into the nearest ocean
Morally, probably not
My turbines never spun, it overheated and blew up. I wounder if it matters what hose upgrade you use and I would love to know the power source to use cause every "How to" uses source blocks not in survival for power.
You definitely need a lot of strong pumps to keep up with the reactor, it burns through a lot of water, but as long as it's completely full before you turn it on, and you refill it once when it is on, it should make an infinite loop. It sounds like you didn't give it enough time to fill up fully
Will the reactor explode if you just run out of fissile fuel? Or will it just stop?
It should just stop I believe, but if will explode if if overheats, or fills up with waste or steam
hey, i made my fission reactor, filling it up with 6 electric pumps with speed upgrades, after that i made the turbine and connected it to the coolant, it's receiveing a lot of steam but even with the electric pumps and the water output of the turbine i can't use the reactor above a 0.3 burn rate, otherwise it goes out of water. it's been 3 days that i'm having this problem and i literally can't solve
How big did you make the fission reactor? And are you condensing the steam back into the reactor?
@@Hellfirem4ge i made 5x5x5. i'm condensing the steam to the turbine
@@gutty1988 sorry, I mean do you have pipes coming from the vents in your turbine to pull the water out and back into the reactor? That way you should have an endless loop of cooling
@@Hellfirem4ge yeah, i really don't know what is the problem
@@gutty1988 do you have enough condsensers in the turbine? Is the flow rate of the pipes from the turbine high enough? There's a few things like that which can affect it, but I know I can run at around 15 with the setup I have without running out of coolant
How do you generate enough sulfur for sulfur dioxide?
hi, for some wierd reason the water pipes are not pumping water out or in to the to reactors, any idea why?
Have you checked that they're configured to pull from the water source and that the reactor is completed and the UI comes up? Those are the most common ones :)
@@Hellfirem4ge i have been playing for a little longer, and yes you where right, but i didn't realise this quick enough
@@Hellfirem4ge now i have a different problem, im currently playing on my multiplayer server with my friend and the chemical tank wont output the fissile fuel for some reason, i have tried using better pressurized pipes and changing the input/outputs of the pipes and chemical tank, any idea why?
@@finntram353 have you made sure the chemical tank is set to output from the top?
@@Hellfirem4ge i tried that before, but i think now when you said it, it decided to work
I configured my turbine and reactor exactly how you did before going into discussing fissile fuel. All the coolant is connected from a body of water as it should be, and is connected where it needs to go. My coolant ran out a minute into running the machines. Why is that?
Did you top it up using a water source until both the steam turbine and the reactor was full like I did in the video? ☺️
@@Hellfirem4geIs the reactor supposed to be full of water? I thought I was supposed to wait until the reactor is full of water, then the vapor gets put in the turbine through the pressurized tube on the bottom. Im using ultra quality mechanical tubing to pump water into reactor using a pump that is speed modified and everything, but the reactor takes foreverrrrrr to fill up when it runs out of coolant.
@@mossghitsli6983 yes, it definitely needs to be full of water when the turbine is full and then you'll have a system that never needs the water replacing, but if you just turn the coolant into steam, there'll be no coolant left to cool the reactor ☺️
I figured it out and got it working. I ramped up the burn rate of the reactor by 2, would let the water flow back in, then turned it up more. It worked for about 4 minutes but then started overheating at burn rate of 12 or 13. Hit the scram button, and saw the temp creep back down. The reactor was receiving constant damage and I couldnt figure out how to stop it and it blew up. Since this is a shared personal server, I begrudgingly reverted the world to a backup save from 3 hours prior. This undid my mistake of it blowing up. Sadly, it also undid my awesome implementation of the fissile fuel refinery chain. What I wanna know is what caused the reactor to blow even after I turned it off? Was it backpressure from the water or vapors? I had the turbine set to IDLE instead of DUMP EXCESS so idk if that matters. @@Hellfirem4ge
@@mossghitsli6983 so as soon as the temperature gets too high, the damage will keep ramping up until you inject some emergency coolant to bring the temperature back down, so even if you hit scram, it can still blow up. That's why I set up the emergency coolant system at the end of the video to stop that happening ☺️
I would make sure you also have enough energy storage, that causes a lot of issues if you don't dump the excess energy because the steam goes back into the reactor and raises the temperature like crazy!
Just on the first part and I built everything correctly and when I right click it won’t give me the interface. Im also confused by “closed your door with glass” meaning place the last two glass pieces last?
Yes 😊 it shouldn't matter, just double check your modpack hasn't changed it to structural glass or something
try with structural glass, i had the same problem
So quick question? I built the while thing right… now i dont quite know where i would put my Flux plug or some thing like that to use the energy produced?
You mean the port? You can replace any of the glass with a port and it should still work 😊
@@Hellfirem4ge Alright ill try it next time i hop on the server , thanks.
@@Hellfirem4ge i tried the 2 mekanism ports but it still didnt work… also the reactor blew up( ive been running it at .1 and even with 20 sinks connected the water still went down extremely fast, so im confused there)
im stuck making the turbine. apparently i need a "Rotor bearing" made a few but cant figure where i need to put it. nor can i find anywhere online (at least for the last 2 days of looking) that can help me
Hmmm that's really odd, it should work if you follow exactly what I do in the video. That's the only way to set it up really (other than scaling)
set it up exactly how you did in your video. and that when i got a notice when i right clicked the turbine i got a message saying "Turbines require exactly one bearing"
Figured out the bearing thing. Was from another mod that I didn't uninstall completely. Did a fresh install and new save. But still having issues with the turbine. Built it exactly as you have here as a test run and it doesn't light up
I used a waystone to go to the end, came back and it was exploded. Super confused
underrated. best guide
Thank you 😊
is there a reason my turbine reactor won't accept power? i have connected universal cable and it does not have any power, my guess is that it has so little that it doesn't show
Turbine reactors don't need power, they need steam from a reactor and then output power
From what mod was your sink you used?
It's from a mod called cooking with blockheads. There's a bunch of alternatives though
@@Hellfirem4ge ah i see thanks
@@Hellfirem4ge what would you recommend to use? because i turned it on and the water quickly vaporized
@reggerdernoobs2678 I would recommend filling some tanks with water from mekanism and pumping it in. Start the reactor on a low level and slowly increase it until you have your infinite loop
@@Hellfirem4ge thanks for the quick response
Do you have any other guide on the 2nd part ? it felt rushed and im having problems gettin it to work
The fuel part? If you check out the Create Mekanized overview video, I go in a lot more detail in that one 😊
@@Hellfirem4ge played with it for a while and had to change some parts but i got it to work thanks !
Very helpful thanks
Just made (almost) the entire thing like the tutorial said it, but for some reason, the tirbine isnt working while the reactor itself does (no interface). Im so confused about it. Any idea what I couldve made wrong?
Normally the issues are:
- It's too tall (fans don't fit)
- The configuration of the magnet and motor is wrong
- there's a random glass block inside the reactor or an input missing
Beyond that it's kinda trial and error tbh. Make sure your modpack doesn't need structural glass too
Just figured out, that I used the wrong blocks, since I didnt foznd the needed Block in the creative inventory for Mekansim at the turbine parts. Fixed it and it worked
Didn't mention it, but should advise people to not try to be smart and use sticky pistons on the reactor failsafes -- if anything goes wrong with reactor you don't want it to clear and reset on it's own. Very likely to then fault, reset, then blow up from same state if it was already damage from first fault.
You can make the reactor almost never have to turn off/fail if you put 2 extra valves on the turbine. Put comparator on one that will output the steam level and the other you put a resistive heater that requires a redstone signal and is set to like 10-100 times your turbine's output. Anytime steam fills up it can run the heater to bleed some energy, so reactor never loses coolant loop when turbine self slows from energy/steam being full.
question. how do i get the water in. i cant even figure out how to do it with the mekanism creative water tanks, and this modpack doesnt have the sink
Just make sure you have the inputs and outputs set correctly on the pipes and the reactor and it should work 😊
you have your setup wrong. dont put pipes between the turbine and reactor. go port to port. will run and work 10x better. thats the way the devs designed it. that way you dont need to supply it with coolant once you turn it on even at max level
My reactor blew up and even after repairs the turbine is not spinning and won’t recycle the water.
Did you find out why it blew up? The 2 most common reasons are a backup of energy or not enough water when active
i just built it in creative and the fuel won't go in the reactor I'm stumped 😭
Check the configuration of the container, it needs to have output set to the top
for people who had already built one of the thing turbine, reactor, etc timestamps would be helpful
what mod is that sink from?
I'm not sure what to do my fission reactor just won't work I tried everything I looked over the video 5 times .do you have any advice?
What modpack are you using? Some packs require structural glass for example
@@Hellfirem4ge Sorry I was using another modpack that had two different types of reactor glass and i used the wrong one on accident
If you may I have another question I was wondering how you got the water to fill up the fission reactor so fast is there another pump besides the regular pump because originally, I used 32 pumps and I only just a little bit of coolant.
@@antsforever1356 I think in the video I used mekanism pipes and a sink from cooking with blockheads but having a lot of pumps is probably the way to go with normal mekanism. Thankfully you don't lose water over time so you only need to fill it once
@@Hellfirem4ge Thank you so much for the info overall the video was very helpful, and I wish you luck to a million subs!
wait so can i use bio fuel instead of fossil fuel?
Absolutely not 😅
oh thanks lol
"Please don't break waste barrel"
Me: (After watching) *I want to do is break the barrel*
my fission reactor isnt getting any bit rate it is stuck at 0mb/t when activated, the fuel doesnt seem to be going in any ideas?
Make sure your input is configured to fuel and the output of your fuel is pushing it in
can't u replace the normal pistons with sticky pistons so it resets itself or will that cause problems?
You probably can but it will restart the system again so this way you have to manually intervene and avoid disaster so it's more of a failsafe
@@Hellfirem4ge isnt that good tho? i think im missing something. cuz it will only reset itself when the problem is resolved? so then it goes back on and if something goes wrong again it will stop it again. or am i forgetting something?
If everything goes well then yes. The problem is that with chunk loading etc, stuff doesn't always work perfectly. You should be aiming for the system to never go off, rather than have it go off and reset
@@Hellfirem4ge ahh i see this way of doing it manually u know when its on or off regardless of that, thanks
@@Hellfirem4ge right now im running into the issue that the second i turn it on it just eats ALL the water and doesnt replenish enough. im using the electric pump from mekanism with speed upgrades. did i do something wrong?
Why is my reactor's temperature higher than yours??
Do i need to build this far away from my base? I dont want my plants etc to die
It's better to build it far away in case it explodes, but normal activity shouldn't kill plants etc
i only need the reactor for the radioactive waste, do you think this could work with a electric pump and elite pipes? on the lowest settings.
So if you set it up correctly, you don't actually need to be pumping any more water in, so you could use that setup to fill the reactor, it would just take a long while. Just make sure that you turn it on, wait for the water level to drop, then turn it off and fill it up again to keep it flowing 😊
@@Hellfirem4ge i'll try, thank you very much for the detailed guide :)
I’m having an issue where I can see both the turbine and reactors interface but when I activate the reactor, there is no burn rate or heating rate. Nothing happens. I’ve looked through the comments and found the structural glass switch from reactor glass for the turbine and it hasn’t helped. My coolant tank is filled with water all the way. I have everything connected with the correct cables, my reactor ports are configured to the right setting. I have the second turbine valve connected to an ultimate energy cube for power. Still nothing. Any help? Thanks
I've honestly never heard of that error I'm afraid so I'm not sure what would be causing it 🤔
@@Hellfirem4ge actually, i just rewatched your video. And saw that the moment your reactor turned on, there was fissile fuel in your fuel tank. Did I completely miss that part? I need to have fissile fuel in the ultimate fuel tank in order for it to work?
Oh yeah absolutely, you need to have fissile fuel for any of it to work 😊
@@Hellfirem4ge can’t believe I missed such a fundamental factor. The fuel. Thanks for the help. Great video:)
Hey @Hellfirem4ge i need help on one more thing. I put together all the machines to create the fissile fuel with all the logistical, mechanical, and pressurized pipes. But it seems in your setup, you dont have any universal cables for power. Are they underground in your setup? Not sure if you even need the power. Thanks in advance
is it possible to get rid of nuclear fallout in 1.16.5 ....
Only using either time of commands.
I believe the command is /Mek radiation remove or something similar to that
is there a size limit for the turbine and reactor ?
There is, I think it's 15x15 but I'm not 100% sure from the top of my head
i don't understand why the sink doesn't connect even if i take the configurator in pull
Maybe you need an electric pump?
Very helpful 👍
how u find uranium i can t seem to find any even using the digital miner ...
If you have mekanism installed, there should just be ore underground. The main thing to check though is that the chunks were loaded after mekanism was installed or it won't work