Just wanted to say thank you very much! I built my first PC a few months ago with an MSI 3080 gaming z and I was made aware about fan curves but wrote it off due to beginners fear of ruining something, but this is one of the few videos I have found that explains what we are tinkering with and how it is affected. This tutorial was easy to follow, thanks man good luck on the journey!
@@KryzysX I’d probably tell myself the same thing if I couldn’t find it in me to save up for a decent build but then again I’d only be making excuses for myself lol clown
@@inuyasha7108 Ey bro relax, it was a true statement that doesn't have to do with anything on anybody dude, I'm spamming this comment through gaming videos in youtube to Top comments 🗿
was not expecting this to work as good as it did because i had set up my fan control before but it worked way better than anything ive tried good job it brought my temps from 165F (74C) down to 149F (65C)
my fan went from 65 c to on average 47-50 c with fans spinning and they barely produce noise, it really isnt gonna annoy me when im hearing game sounds and my mic barely picks up sounds around me. love this!
Just wanted to say if you check 'Use firmware control mode' the fan curve will be saved to your GPU if this supports it, that way you don't need to use MSI Afterburner at Windows startup or have it running in the background. Just verify the GPU fan keeps running at the same RPM after closing MSI Afterburner, you can just hear it.
thank you so much! you are a lifesaver! i had my pc's gpu idling at about 60 degrees and now it is much cooler idling at about 37 degrees. you were much help to me and this this vidoe was awesome
@@jamienava6750thats for an extra mid video ad, (for more money) but videos of any length can be monetized, besides they changed it from 10m to 8m about a year or two ago
Thanks. I have an RTX 3060TI FE GPU. Followed your steps and managed to get it run 5 degree cooler at full load and 2 degree cooler at idle. Yes there is slightly more noise but I would rather prefer that to keep the GPU cooler :) Appreciate your efforts. Cheers
@@RollwithPunch My gpu fans don’t stop spinning even at idle, when I play games it’s fine for it spin but it’s spins all the time, can you pls help me.
You're a legend! Adjusting the fan curve dropped idle by 12 degrees with fans set to balanced in icue. When I bump them up to extreme I have a 14 degrees drop in idle. Under load I've seen a 8-10 degrees drop!
I have set GPU fans such that it stays completely silent till 45 degree celcius and rise exponentially basically reaching max speed at 60. It is the best combination of temp and noise.
Great video . What percentage should I set my fans to? Right now they’re at 30% and my temps gets up to about 150 degrees Fahrenheit . Thx for the help. New PC gamer
This does not work for me. My GPU ramps up to 3500 rpm as soon as it reaches 70C. It completely ignores the curve set in afterburner. I am completely puzzled about this.
In the fan curve the last point schould always be 100% fan power at the hottest temperature that you allow your gpu to reach. For me its 85*C and the lowest Point is so that the gpu has all fans off when im only use the Browser. So below 35*C all the gpu fans are off.
@@mkAAn12 I have an issue, my cpu temp stays at 63-65 C at idle and 65-75 in gameplay, no performance loss how to keep it cooler during idle? Note :- I reapplied thermal paste yesterday I have a ryzen 3 3200 g
@@mkAAn12 I put the power options to balanced, now in HWinfo it shows 45 C, in idle and 50-60 in gaming is that ok? Btw I'm from India and it warmer here
Tryed to set 100 full fan speed to a g1060 5 gb to get max of 75 degrees. But whaterver setting i would do in afterbuirner it alwais get to 82 degree. Why is my gpu not folowing afterbuner?
I just manually changed the fan speed % with the slider in the bottom right and it fixed my high idle temps. Went from 58C to 35C. Turns out my fan speed % was under 50 and my fans wouldnt turn on unless my GPU reached a certain temp.
@@RoyTheGamer When you open MSI Afterburner you will have your Voltage, Clock, and Fan sections with sliders under each category. In the fan category you have sliders for power limit %, temp limit %, and fan speed %. Use your mouse and slide the slider to your desired %. I leave mine on 60% for idle and I crank it up to 75-80% for intensive games.
how do i reset it mine worked fine and i accidently activated a custom curve now my gpu doesn’t spin unless after burner is open and im tryna save the process
thank you for this video just got my new pc after two years of playing on a 1650 new build got a 12700k 3070 ti 32gb ram now time to test cod with the fan curve 😁
guys can you help me please? i have an msi rtx 2070, and my fans always do a super loud fan noise when it reaches 76c in the same test that you are doing, is really annoying when i play games cuz is really loud and idk how to remove this thing, becauase even if i change settings it keeps do this when 76c are reached
Hi, followed you instructions. Issue im having is the GPU is following my fan curve and as soon as it hits 66c the fan go to max and drop almost instantly when temp drops and repeat. Any idea why afterburner looses control of fans at a certain temp? Ive got a msi 2080ti xtrio fyi. Also btw is does exactly the same when manualy selecting fan speeds ( non auto )
Bruh, I tried mining and the GPU hit 80c temp, but this MSI Afterburner (max fan + min voltage) had absolute no effect on temp, still remained at 80c? Any ideas how to force GPU temp down 10c at least? Max Fan was loud as hell, sound like my computer was about to take off 😂
Once I got my head around it! worked well, went from 74c to 78c but the fan noise has easily halved. Thanks. Also i know this is old but im about to test a game out with these curve settings but i had this massive jump in fan noise when playing a game, like so loud but happens randomly. Only just got the card (2070 Super) but not sure why it does it, but will see if this curve helps first
Hey. I have noticed that my pc is getting pretty hot and my GPU fan is really loud. I want to not be able to hear it so much but i want it to be cool at the same time. what should i do. I have a Lian Li 011 dynamic case with 6 fans and the cooler. i dont know what to do .
i recently bought a gigabyte rtx 3070 but it's not following my fan curve after i restarted my pc today, before then it was following the curve nicely. i don't know why it suddenly stopped working because i didn't even change anything... any ideas what's causing this issue? i already reinstalled msi afterburner but the problem is still there.
@@dande3042 i did, i installed Fancontrol by rem0o (idk if thats the exact name but something like that)with this app(its free)u can manually adjust the speed that the fans spin at, you can also set fancurves but i haven't really got that to work, although im sure you can get it to work. For me though i just set like 70% fanspeed for my gpu if i play a game like valorant and it works perfectly fine. Hope this helps, if u still have questions i'd be happy to help out, good luck!
I’ve got a 3060ti oc, when I did my curve, the third fans stops and spins again every 5 seconds, Ik afterburner can only control 2 fans but why is my third fan acting like that.
i can't disable the gpu fans after 60-61c and it only stops at 50c i want it min 10c higher, MorePowerTool doesn't work any more woith latest amd driver (rx 6700 xt)
Hey whenever I go into the settings it shows me the general settings and a bunch of other settings and none of them give me access to the fan setting. What should I do from here? Thanks
Did this on my MSI Suprim X 4090 and the max temp it ever got to is 56°. That seems crazy low right? Do I not have something set up properly? Is this just not a good test for a 4090?
yes indeed. so just make sure you select the "start with windows" option or you can also just click on the Windows logo at the top right. you can also save a profile as a default and then click the windows logo at the top right and windows should start with your selected profile
@@imagineadavidoutmusic but this will also make the pc slow right? i thought then why not use the amd software because it already starts with windows and that will also not take the extra power but i dont know why but amd software is louder the afterburner
@@darkness9558 haha don't worry my brother not everything slows your pc down U can also check your task manager and see, that if MSI afterburner, when runnin from Wondows start in your background the whole time, it won't consume either much CPU/GPU or RAM I did indeed checked right now and I is @ 0% CPU, 2MB RAM and that's all lol 🤣 and also I think that afterburner is the only program from MSI which is really helpful and literally 0% annoying/ad/bloat shit like other programs, from other brands and so on Always check for yourself and don't follow any rules or something like that because every system aswell is different and will react/work different so u need to check for yourself :) and don't panic haha, you won't break or destroy anything 👌
depende el procesador y la board, en mi caso en la bios tengo administracion de fans y desde ahi puedo seleccionarlos y decidir que sensor de temperatura quiero que controle la velocidad de que grupo de ventiladores
hi man. i´ve got one question. how do do to turn the middle fan on? or configure it ? i was checking my temps on my 3090 rog and it shows "GPU 39°C; Memory 48°C and HOT SPOT 45°C" while fans are like this FAN 1: 1000 RPM - FAN 2: 0 RPM and FAN 3: 1243 RPM. How can i enable or configure the number 2 fan (i think it´s the heat disipation fan)
Hi. I have this issue where when I boot my PC the fans will run at 100% nonstop. Whenever I unistall the driver, it stops, but reinstalling it being either an older or newer version the fans star running again. I tried using the afterburner, but it won't let me config the GPU fan... So I don't know if I haven't done something that's on your video or if you would consider this method will work. Some specs are: RTX 2060 12gb Ryzen7 Pro 4750G Windows 10 I've had this GPU for roughly a year. Thanks and good day
Love afterburner I finally found a great fan curve setting for my zotac trinity 3080 12gb oc card since the default fan settings was a bit annoying. Now its whisper quiet in desktop mode while web surfing/watching youtube and the fan noise is tolerable during my gaming sessions. :)
before that i had a silent tower on maximum 70degree on highest settings ingame with 165hz... with your setup i have barely the same temperature and its loud like a jet engine...i watched about 30minutes and i can tell it was sometimes 3-5 degree colder!? dude thats not worth in the cards lifetime.. you just fuck up your gpu/cpu/chassie fan much faster than your card would die because it run on 70degree? or i get something wrong here?
Hi Sir, this is exactly what is explained in the video. You can have cooler temps but the card will be louder, or you can have hotter temperatures but the card will be quieter.
Got the same problem on my RTX3070 after 1,5 years. GPU is getting to 83 degrees. When hitting 84 the fans spike from 2900rpm to 4000rpm for a couple of seconds and then it's fine again for a minute. I figured out that if I downvolt my graphics card it stays cooler (just a little) with kinda same performance, but it's still pretty hot (over 80). I thought about replacing the thermal paste but I think I am not too confident because this card has thermal pads as well. Replacing thermal paste on my 970 was no problem tho... What do you think?
@@xaqlim ah I don’t know like when I boot up my pc it’s silent but after 10 minutes or so the fans start kicking in and then everything cranks up by itself even the wattage goes to 150 watts without using any programs or playing games, but when I do reinstall drivers on the GeForce experience it goes back to silent and everything goes back to 0%
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Just wanted to say thank you very much! I built my first PC a few months ago with an MSI 3080 gaming z and I was made aware about fan curves but wrote it off due to beginners fear of ruining something, but this is one of the few videos I have found that explains what we are tinkering with and how it is affected. This tutorial was easy to follow, thanks man good luck on the journey!
Great to hear!
a gamer who's never had a low end gaming experience is never considered a gamer 🗿.
Unwritten Rule of Life #3
@@KryzysX I’d probably tell myself the same thing if I couldn’t find it in me to save up for a decent build but then again I’d only be making excuses for myself lol clown
@@inuyasha7108 Ey bro relax, it was a true statement that doesn't have to do with anything on anybody dude, I'm spamming this comment through gaming videos in youtube to Top comments 🗿
yo i have the exact same card, what fan curve do you have for it
was not expecting this to work as good as it did because i had set up my fan control before but it worked way better than anything ive tried good job it brought my temps from 165F (74C) down to 149F (65C)
my fan went from 65 c to on average 47-50 c with fans spinning and they barely produce noise, it really isnt gonna annoy me when im hearing game sounds and my mic barely picks up sounds around me. love this!
I just wanna say thank u so much, my temp was on 72+ and now my pc is a bit louder but never pass 65
Just wanted to say if you check 'Use firmware control mode' the fan curve will be saved to your GPU if this supports it, that way you don't need to use MSI Afterburner at Windows startup or have it running in the background. Just verify the GPU fan keeps running at the same RPM after closing MSI Afterburner, you can just hear it.
easy to follow and straight to the point.excellent video my friend.my temps went from 75c to 60c,thank you
thank you so much! you are a lifesaver! i had my pc's gpu idling at about 60 degrees and now it is much cooler idling at about 37 degrees. you were much help to me and this this vidoe was awesome
doing this gave me a 25 fps increase on cyberpunk, amazing tutorial thanks
talk talk talk, get to the point
I heard videos need to be at least 10 minutes long to get that sweet revenue money.
@@jamienava6750thats for an extra mid video ad, (for more money) but videos of any length can be monetized, besides they changed it from 10m to 8m about a year or two ago
Thanks I'm gone
Thanks. I have an RTX 3060TI FE GPU. Followed your steps and managed to get it run 5 degree cooler at full load and 2 degree cooler at idle. Yes there is slightly more noise but I would rather prefer that to keep the GPU cooler :) Appreciate your efforts. Cheers
Nice work!
i think you just fuck up your fans faster than the card
@@RollwithPunch
My gpu fans don’t stop spinning even at idle, when I play games it’s fine for it spin but it’s spins all the time, can you pls help me.
@@aaravrajeshmishra6566bro, you know nothing about computers. it's supposed to spin the whole time idiot
@@aaravrajeshmishra6566
Why does it bother u?
Thank you really. My rtx 3060 running now with high settings in ghost of tsushima 63 degrees max. Before was 78-80 Degrees. thank you!
You're a legend! Adjusting the fan curve dropped idle by 12 degrees with fans set to balanced in icue. When I bump them up to extreme I have a 14 degrees drop in idle. Under load I've seen a 8-10 degrees drop!
I have set GPU fans such that it stays completely silent till 45 degree celcius and rise exponentially basically reaching max speed at 60. It is the best combination of temp and noise.
just came from ur cpu fans video from like a year ago, your editing has improved so much
HAHAHA Thank you for that, I really appreciate the comment. I've been working hard on it!
bro as soon as you did that first point thing and dragged it left i was like BRO ur a genius.
Used your guide with Fan tuning from git hub, to set up my chasis fans for the GPU temperature, thanks.
Thank you mate, YOur are legend. My 3060ti goes to 80+ degree after setting it come down to max 59 degree.
just watched your cpu fan curve video, gotta say you helped me a lot! thanks
You did a good job. Thankyou man
Great video. Subbed to the channel look forward to more videos like this.
Awesome! Thanks now my gpu's heat runs at 40!
How
Very good video, just followed your advice and decided to try on a RX 570, that usally these cards tend to get hot, lets see how well it goes
Undervolted then used this guide to make a nicer fan curve. PC sounds much better sat next to it gaming and is cooler, thanks
Great video . What percentage should I set my fans to? Right now they’re at 30% and my temps gets up to about 150 degrees Fahrenheit . Thx for the help. New PC gamer
I wish you all the best!
Surely the optimun setting are set at the factory.
ON FKING GOD
This does not work for me. My GPU ramps up to 3500 rpm as soon as it reaches 70C. It completely ignores the curve set in afterburner. I am completely puzzled about this.
thank u bro
In the fan curve the last point schould always be 100% fan power at the hottest temperature that you allow your gpu to reach. For me its 85*C and the lowest Point is so that the gpu has all fans off when im only use the Browser. So below 35*C all the gpu fans are off.
what happen with the fans? can be damage or reducing the life of them?
If you run the fans faster this can reduce the life yes.
@@RollwithPunch the curve are 40 speed in 30c/50 speed in 51c and 80% on 75+c.
Theyll be damaged either way. If it gets to hot all components will be damaged..
Fans are rated for 1000s of hours of lifespan with 100% speed.
the video is very helpful thanks man :))))
That's a cool looking computer case. What case is it?
Thank you very much!!! :D
what if i see the fans going on 0 and another at 459 rpm? examply 1 is not spinning and two are spinning on idle.
This is very helpfull. Thank you!
amazing ,direct 10 degree drop after aplying setting, but game performance drop toh nahi hoga na
I just wanna know if having ur gpu fans spinning for long periods wont affect their durability ?
My MSI Afterburner Setting:
44 Degress %0
50 Degress %40
60 Degress %65
67 Degress %75
70 Degress %80
75 Degress %90
80 Degress %100
How is my setting?
My GTX 1650 stays at 39-48 celcius at idle 0% usage is it normal?
@@deb5110 yes this is normal.
@@mkAAn12 I have an issue, my cpu temp stays at 63-65 C at idle and 65-75 in gameplay, no performance loss how to keep it cooler during idle?
Note :- I reapplied thermal paste yesterday
I have a ryzen 3 3200 g
@@deb5110 If the processor fan is bad, this may be the main source of the problem.
@@mkAAn12 I put the power options to balanced, now in HWinfo it shows 45 C, in idle and 50-60 in gaming is that ok? Btw I'm from India and it warmer here
I can copy your msi fan settings????
I highly recommend undervolting too
Tryed to set 100 full fan speed to a g1060 5 gb to get max of 75 degrees. But whaterver setting i would do in afterbuirner it alwais get to 82 degree. Why is my gpu not folowing afterbuner?
I’m trying to get my gpu fans at normal speed but every time I turn on my pc the fans go into high speed
I just manually changed the fan speed % with the slider in the bottom right and it fixed my high idle temps. Went from 58C to 35C. Turns out my fan speed % was under 50 and my fans wouldnt turn on unless my GPU reached a certain temp.
Where did u manually change it?
@@RoyTheGamer When you open MSI Afterburner you will have your Voltage, Clock, and Fan sections with sliders under each category. In the fan category you have sliders for power limit %, temp limit %, and fan speed %. Use your mouse and slide the slider to your desired %. I leave mine on 60% for idle and I crank it up to 75-80% for intensive games.
@@hades6933 Got any reason why my gpu temp is at 51+ after I formatted my pc? before it was settling at 30+ idle
how do i reset it mine worked fine and i accidently activated a custom curve now my gpu doesn’t spin unless after burner is open and im tryna save the process
I added a new reference point. I can not move it right or left, just up and down on the fan graph. What am I doing wrong ?
thank you for this video just got my new pc after two years of playing on a 1650 new build got a 12700k 3070 ti 32gb ram now time to test cod with the fan curve 😁
Should we set the fans at 0% at about 35 C or should they be running all the time?
i have rtx 4080 temps were mad 60+
now its always at 20-40 peak 43
guys can you help me please? i have an msi rtx 2070, and my fans always do a super loud fan noise when it reaches 76c in the same test that you are doing, is really annoying when i play games cuz is really loud and idk how to remove this thing, becauase even if i change settings it keeps do this when 76c are reached
Hi, followed you instructions. Issue im having is the GPU is following my fan curve and as soon as it hits 66c the fan go to max and drop almost instantly when temp drops and repeat. Any idea why afterburner looses control of fans at a certain temp? Ive got a msi 2080ti xtrio fyi. Also btw is does exactly the same when manualy selecting fan speeds ( non auto )
You found a solution?? I have the same problem and can't find a solution :c
Wow my rtx 3080 got 10 celsius cooler with this. from around 70 to 60-61. Thanks alot man. :D
But then your ears are gonna grind
@@brad8122 it's not even that loud literally my ceiling fan is louder lmfao
@@brad8122 No its not loud at all.
Sad that afterburner causes issues like roblox not working properly and helldivers2 doesnt either
the fan setting doesn't show in properties and i can't change anything with the fan settings Please Help!
Bruh, I tried mining and the GPU hit 80c temp, but this MSI Afterburner (max fan + min voltage) had absolute no effect on temp, still remained at 80c? Any ideas how to force GPU temp down 10c at least? Max Fan was loud as hell, sound like my computer was about to take off 😂
U nid to open msi afterburner while playing games .do mot turn off
My MSI gaming x trio gets loud at 37% fan speed. I have no idea what to do
is it fine if I set the fan speed to 80% when the gpu reach 80 degrees?
Once I got my head around it! worked well, went from 74c to 78c but the fan noise has easily halved. Thanks. Also i know this is old but im about to test a game out with these curve settings but i had this massive jump in fan noise when playing a game, like so loud but happens randomly. Only just got the card (2070 Super) but not sure why it does it, but will see if this curve helps first
MSI Afterburner has never worked on my (for fan speeds) PNY GeForce GTX 1650 so I just use GeForce Experience to manually adjust fan speeds.
im confused why cant we use the system info viewer/ smart fan 5 to adjust the fans?
can u help me i when i type the limit of fan to 100 it change to +50
Hey. I have noticed that my pc is getting pretty hot and my GPU fan is really loud. I want to not be able to hear it so much but i want it to be cool at the same time. what should i do. I have a Lian Li 011 dynamic case with 6 fans and the cooler. i dont know what to do .
So how do I se my base reading temp?+ in Funmark?
i recently bought a gigabyte rtx 3070 but it's not following my fan curve after i restarted my pc today, before then it was following the curve nicely.
i don't know why it suddenly stopped working because i didn't even change anything...
any ideas what's causing this issue?
i already reinstalled msi afterburner but the problem is still there.
When you say it is not following the fan curve, what is it doing instead?
@@RollwithPunch its going at a really high speed even tho the temp is only at 30 degrees celcius
@@ducttape5554im having this issue right now, did you manage to solve it?
@@dande3042 i did, i installed Fancontrol by rem0o (idk if thats the exact name but something like that)with this app(its free)u can manually adjust the speed that the fans spin at, you can also set fancurves but i haven't really got that to work, although im sure you can get it to work.
For me though i just set like 70% fanspeed for my gpu if i play a game like valorant and it works perfectly fine.
Hope this helps, if u still have questions i'd be happy to help out, good luck!
Can I apply this to msi rtx4070ti gaming x trio.
Jedi survivor cal ...look alike😅😅
why do i not have the fan setting next to general
I’ve got a 3060ti oc, when I did my curve, the third fans stops and spins again every 5 seconds, Ik afterburner can only control 2 fans but why is my third fan acting like that.
is it normal when i play games it always change my gpu util to 50-100%
i can't disable the gpu fans after 60-61c and it only stops at 50c i want it min 10c higher, MorePowerTool doesn't work any more woith latest amd driver (rx 6700 xt)
Him : Press The Triangle key
Me with my keyboard and mouse : 👁👄👁
el programa msi atburner , no hace interferencia con el progra de amd ?
The fan setting is missing help
Thankyou
Sadly for me I have a really old and bad case with 0 air flow at least my temp is limited at 82 great tutorial tho
I'd say screw it and drill my own vent holes into the case.
Hey whenever I go into the settings it shows me the general settings and a bunch of other settings and none of them give me access to the fan setting. What should I do from here? Thanks
Hey, is a problem If my gpu have 55 degrees while gaming?
Nope,my hot asf 3060ti with undervolting and custom fan curve has 74c so don't worry be happy)
my friend has a acer isiper whatever there called with some mad gpu and you can not do anything with after burner with it
Did this on my MSI Suprim X 4090 and the max temp it ever got to is 56°. That seems crazy low right? Do I not have something set up properly? Is this just not a good test for a 4090?
will it always run like this in idle ?
My rx 6650xt while overclocked at 3000mghz Mac and 2900mhz min and vram clocked to 2400 with the default fan curve I stay between 60 and 63
lmao i just lost 15 degrees from my gpu using ur fan set up
Bro seriously set fan speed to 50% if gpu reaches 100°C 💀
If i want to use my fan curve, do i need to enable both auto and user define or just user define?
does the fan curves only works when afterburner on in background?
yes indeed. so just make sure you select the "start with windows" option or you can also just click on the Windows logo at the top right. you can also save a profile as a default and then click the windows logo at the top right and windows should start with your selected profile
@@imagineadavidoutmusic but this will also make the pc slow right? i thought then why not use the amd software because it already starts with windows and that will also not take the extra power but i dont know why but amd software is louder the afterburner
@@darkness9558 haha don't worry my brother not everything slows your pc down
U can also check your task manager and see, that if MSI afterburner, when runnin from Wondows start in your background the whole time, it won't consume either much CPU/GPU or RAM
I did indeed checked right now and I is @
0% CPU, 2MB RAM and that's all lol 🤣 and also I think that afterburner is the only program from MSI which is really helpful and literally 0% annoying/ad/bloat shit like other programs, from other brands and so on
Always check for yourself and don't follow any rules or something like that because every system aswell is different and will react/work different so u need to check for yourself :) and don't panic haha, you won't break or destroy anything 👌
i did the first step and the temp and fans got louder/higher :(
I use Fan Control in my pc, costum curves for gpu, cpu and chassi fans all in one program 👌😎
so software name is ( fan control ) ? u can control all fans curve ? including gpu fan and pc fan ?
@@oldschool_bamagatrader9960 yup
@oldschool_bamagatrader9960 yes. I use it for everything
the fan tab doesnt appear in MSI afterburner for me
me too, did you find the solution?
nah i cant fix it
if you are using laptop it wont show up
@@gabenewell2500 ah okay, thank you
eso solo cambia la de la grafica cierto? como puedo hacer para el procesador?
depende el procesador y la board, en mi caso en la bios tengo administracion de fans y desde ahi puedo seleccionarlos y decidir que sensor de temperatura quiero que controle la velocidad de que grupo de ventiladores
hi man. i´ve got one question. how do do to turn the middle fan on? or configure it ? i was checking my temps on my 3090 rog and it shows "GPU 39°C; Memory 48°C and HOT SPOT 45°C" while fans are like this FAN 1: 1000 RPM - FAN 2: 0 RPM and FAN 3: 1243 RPM.
How can i enable or configure the number 2 fan (i think it´s the heat disipation fan)
Wait so only one of your fans are working ?
Hi. I have this issue where when I boot my PC the fans will run at 100% nonstop. Whenever I unistall the driver, it stops, but reinstalling it being either an older or newer version the fans star running again.
I tried using the afterburner, but it won't let me config the GPU fan...
So I don't know if I haven't done something that's on your video or if you would consider this method will work.
Some specs are:
RTX 2060 12gb
Ryzen7 Pro 4750G
Windows 10
I've had this GPU for roughly a year. Thanks and good day
you need to change the fan curve on the motherboard (BIOS) -> this is what is used until the msi afterburner app is running
Hello, can i configure my aio fans connnected to the cpu, independently of the rest of the other fans set up ? Thanks
Hello, Can you help me set the curve for my graphic card? I will be very grateful MSI GeForce RTX 2060 Super Gaming X
dont you lose perfrormence¨?
Love afterburner I finally found a great fan curve setting for my zotac trinity 3080 12gb oc card since the default fan settings was a bit annoying. Now its whisper quiet in desktop mode while web surfing/watching youtube and the fan noise is tolerable during my gaming sessions. :)
everything on max and furmark uses 28% of my gpu...
U dont have to worry about the fan being too loud if u have a GT 1030 lol
before that i had a silent tower on maximum 70degree on highest settings ingame with 165hz... with your setup i have barely the same temperature and its loud like a jet engine...i watched about 30minutes and i can tell it was sometimes 3-5 degree colder!? dude thats not worth in the cards lifetime.. you just fuck up your gpu/cpu/chassie fan much faster than your card would die because it run on 70degree? or i get something wrong here?
Hi Sir, this is exactly what is explained in the video. You can have cooler temps but the card will be louder, or you can have hotter temperatures but the card will be quieter.
@@RollwithPunch you say "THIS Custom GPU fan set-up will SAVE your GRAPHICS CARD" i still dont get it sorry my english is very bad :D
fan does not exist for me?
Great help. Thank you. BUT for the love of god turn your tool tips OFF. So annoying
my fans are kicking in out of nowhere without running any games, what is the problem?
This could be your CPU cooler, are you sure its not this?
@@RollwithPunch no my cpu temperatures are good
Got the same problem on my RTX3070 after 1,5 years. GPU is getting to 83 degrees. When hitting 84 the fans spike from 2900rpm to 4000rpm for a couple of seconds and then it's fine again for a minute. I figured out that if I downvolt my graphics card it stays cooler (just a little) with kinda same performance, but it's still pretty hot (over 80). I thought about replacing the thermal paste but I think I am not too confident because this card has thermal pads as well. Replacing thermal paste on my 970 was no problem tho... What do you think?
@@xaqlim ah I don’t know like when I boot up my pc it’s silent but after 10 minutes or so the fans start kicking in and then everything cranks up by itself even the wattage goes to 150 watts without using any programs or playing games, but when I do reinstall drivers on the GeForce experience it goes back to silent and everything goes back to 0%
See and check ure hotspot temp