Це відео не доступне.
Перепрошуємо.
How To Change A Driveshaft And Seal On A Smart Car !!!!
Вставка
- Опубліковано 3 чер 2020
- In this video i show how to change the driveshaft and driveshaft seal on a smart 450!!
Link:
Wd40: amzn.to/2Vy51mP
Penetrating oil: amzn.to/3qqcX7J
First time i seen that kind of tutorial... perfect job mate..hope will be more than that ;)
Thank you, yeah there will be some more videos coming!!
Very well explained, thanks.
No problem !
Thanks man very usefull video! How to change EGR Valve on smart !!!
Have you filled it up with the correct gearbox oil? Does not take automatic transmission fluid.....
Great video freind!!
Thank you!!
Best video I have seen. Clear voice and good camera angle. This is a 450 I believe, would it be same for a 451 model?
Thanks, yes this is a 450! It's quite similar on the 451 I think a few bolts are different sizes and there is a plastic cover on one of the bolts but the process is near enough the same hope this helps!
@@supercar.central Thanks SC . I am having this job done tomorrow so your video is a really good to know what's involved. How long should the job take in your opinion ?
No problem, it should be done between 1 and 2 hours!
@@supercar.central Just had the clutch fitted and the seals were leaking so it went back in . I received the car back again and there is transmission fluid all around the gearbox housing leaking . The shaft seals are doing their job though. Not sure why it is leaking oil around the housing .
If the oil is at the bottom of the bellhousing and you are sure its transmission fluid then it could be the input shaft seal leaking on the gearbox!
162 quid i payed so you saved some money well done
Thank you!🤜
Hi I know you done this a while ago , but can you remember if there is a bearing on the drive shaft at the gearbox side of the shaft ? mine is giving a loud clunk when taking off from a stop , and I can move the shaft a little by hand up and down movement . EDIT , after thinking this over , it must be the Inner Universal Joint on the drive shaft that is clunking , there can't be a bearing floating in free air lol
Amazing Content. Who inspires you? Also, Let's Be UA-cam friends? xP
Is that some kind of aftermarket bracket from gearbox to back of the car? :)
That's an original support bracket for the exhaust!! :)
Great job! Do you happend to have the reference of each seal? So I can order and replace them. Thanks!
Thanks! The seal is the same for both left and right the part number is Q0000460V000000000 and here is a link to one, hope this helps! www.ebay.co.uk/itm/131642297260?fits=Car+Make%3ASmart%7CPlat_Gen%3A450&epid=1124841374&hash=item1ea67e0bac:g:7k8AAOSwo0JWNg6k
@@supercar.central Thank you!
Please I have a problem with my smart cdi 2006, car starts alright but the gear does not engage either forward or reverse but then if shift the gear to forward or reverse, you will hear some noise and then three lines appear on de speedometer. Please what could be the possible fault I need help
Did you put a new drive shaft and a new shock absorbers, as the one you took of was old now they look new ?
Good spot, I cleaned up and painted the existing ones!!
I found out that it is practically not necessary to drain the gearbox, you can use a jack that tilts the gearbox so that the oil does not leak.
Well change you're fluids dude?
@@willfreethemfreethem7671 ?
Hyvin esitetty, selkeä .
Thank you !!
Is there only one seal? or is there a seal on both sides of the transmission?
There are 2 seals one on each side
It is the same process to do the other seal
@@supercar.central awesome thanks for the reply and the video!
fill plug is wrong 243 newton meters, manual getting 43 newton meters is correct.
I said 43 Newton meters, the subtitle didn't understand!