Changing Smart Car ABS Reluctor Rings, Tone Ring (Fortwo 450 and 451 1998 to 2013)
Вставка
- Опубліковано 2 сер 2024
- Step-by-step guide on how to replace the ABS Reluctor Rings on a Smart Car.
www.evilution.co.uk/mod/check...
www.evilution.co.uk/mod/repai...
Chapters
0:00 Introduction
1:17 Cracked Reluctor Rings
2:00 Wheel Hub Nut removal
2:37 Draining the Gear Box Oil
6:00 Removing the Cross Frame
7:10 Removing the Dampers
9:42 Removing the Driveshafts
11:47 Inspecting the broken Reluctor
12:27 How to install the Reluctor
12:56 Cleaning and painting the driveshafts
15:30 Reinstalling the new Reluctor
17:26 Replacing the driveshaft seals
21:18 Replacing the driveshafts
23:09 Rebooting the system
Loved the vídeo and how "steady" it was. The rusty was really bad, but the dedication was, to the top. Great DIY vídeo. Thanks
Thank you for the feedback really appreciated .
If you remove both track control arms you can put a lever into the end of the open axel tube and pull it slightly to one side - then the drive shaft comes out without all the pushing and pulling.
Thank you for this feedback, I'm going to change one of the drive shafts so will try it your way.
I joined today because of all your Smart Car content. Everybody makes these jobs sound impossible, im glad to finally see someone doing the job, as many of us would be had to! Thanks for the informative, and keep your great attitude, as i would have to pace a fee steps between jams 😅.
Welcome aboard!
Great Video.
Thankyou, glad to hear you liked it.
THANK YOU, VERY NICE VIDEO, YOU ALSO HAVE A VERY NICE VOICE THAT HELPS LISTING TO SO YO DONT GET IRRITATED
Thank you Med, I really enjoyed getting my smart car back on the road.
good job good video .
Thanks for the feedback.
Brilliant video. I have the same symptoms as you. I’ll be trying this soon
Let me know how you get on.
Just put the rings into the oven ( on hot ) while you paint the shafts, then quickly drop them on, much easier. Also spray all the fixings with penetrating oil the day before, it will be easier and less damaging when you undo them.
Good advice, I'll try this.
I had the same issue, cost £452 for a garage to change the shaft and ring. If only the ring was made from stainless steel 🤦♂
Agreed, I recently bought a drive shaft for £48 from Smarttune Ltd and it came with a reluctor ring fitted. £452 saved must feel good!
Wer der Typ etwas für Unterbodenschutz gemacht hätte sähe der Smart nicht so verrottet aus..
You are right. Thank you
Great Video.