Why are my LED strips not working | showing a different colour? A: they have paint on them!
Вставка
- Опубліковано 20 лют 2019
- In this video we explain why sections of your LEDs are not working, or why they may be showing a different colour.
The likely answer is: they have been painted on! (Or have been obscured by another substance.)
Why InStyle LED?
We stock all of these LED strips for next day delivery.
We can cut and solder your LED strips to exact lengths for your project, and can solder in any corner links and custom length starter leads.
You can provide us with the lengths you require, or even better a quick sketch of your installation with the lengths marked on, and we can advise the best way to wire your LED strips.
We can speak to any installers - before, during and after your project to answer any questions.
Check out our website: www.instyleled.co.uk/
Email us: sales@instyleled.co.uk
Call us: 0116 2799083 - Наука та технологія
Here is the ultimate guide to answering all of your issues : www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
InstyleLED can you please please help me when ever I change mine to any color other than red 2 of them are a opposite color when I go to blue 2 of them turn red when I put white 2 of them turn yellow and it’s always the same 2
@@shawannalaton Hi Austin, yes we answer that question in the guide , link above. Or try some tests like here: ua-cam.com/video/R7LtPCXTwrU/v-deo.html
@@tyenpecental DO you mean you R and B on the controllers receiver or on the LED strip lights?
which ever button i press it just shows red, if i press b or g, its JUST red? ive been trying to fix it for 2 hours and it wont work
Please help only my bottom three lights are turning on but they ether turn red or green
One of my strips is one color and the other is a different color
bo molinelli I have like one roll I can’t only have red green and blue solid I click any other color and it’s like a Christmas light all the colors together no other color that’s solid I can’t even do white
@@lianna5244 samee
Me too
bo molinelli same
Angie Allen I fixed it the connected thing push it it more a bit
My led light things are all different colors if i push pink it turns red and blue! If i push yellow it turns green and red! Help
THere is a cable cross over somehwere or soldering issue. To test, take out the controller completely, then wire each colour of the strip directly to the power supply and test one colour at a time. **note black is positive when using rgb/rgbw****
so take the red cable from the power supply and wire this to the black cable from the strip, then one at a time wire ecah colour cable from the strip to the black cable on the power supply. eg, blue cable to the black negative. this way you can just test blue. and repear for red, green and white if you have rgbw
iiOmgLatte SAME
Please make a video about this problem!!!
@@noatack1483 Yes im going to make several videos to cover all issues in the LED strip world. They will be up very soon!
it’s a color combo. it’s supposed to be like that red and blue make purple. i can’t believe you really just asked why red and blue make pink 🤦🏾♂️
how come everyone’s lights stopped working all of a sudden?
conspiracy : they all stopped so we can buy more 😂💀
Because you didnt buy from www.instyleled.co.uk ! 🤣
Latest software update
Mine dont even turn on, remote doesn’t work either. I would touch it and it lights up but thats it
your white box doesn’t work, get a new one. i had the same problem
@@joann7401 is the white box the "white box" 😂 that u connect to the strip
Rabia Bouanani the rgb control box
Where can I get a new box?
@@lzer1591 amazon I got mine there
When I press blue on my led lights they only turn red or turn noting please help
Hi There, is the red very dull? as if you have orderd a 12v power supply to work with 24v strips then only the red lights up and its very dull. So you would need to order a 24v power supply if this is the case.
Alternatively, there maybe a wiring problem, its hard to say exactly unless I see a picture of your set up
Oneodd Oh so you press the color that’s not working turn it off fade 7 on repeat
@@emelia7889 Omg THANK YOU. U SAVED MY LIFE.❤❤❤❤👌🏻
@@emelia7889 na wrkin
edits and stuff explain more plz😭😭
I have two seppareted strips but they show diffrent colours.. when i have them together.
Marockann same
same
Same
Same do you know how to fix?
Hi I had this same problem where one of them is dim and one of them is very bright it’s because u need to have both of the cords plugged into the same white box
3 of my lights are different colours to the rest and i don’t know why 🤣 its really annoying what do I do
did you ever find out?
Nope I’ve just had to deal with it 😂
Yea when my default white button is red green and blue, and when I try to pick a different color like orange it adds green so it become orange and green, I want it to be one color
Just so you know it may all turn red my led lights are like that now other three turned red
@@yena2644 they are slowly turning red 3 at a time
Can you help me with mine, when I press a colour the colour is only lighting up on one part, and the others are like green or blue. Can you please help? I can show you a picture.
we created a guide here: www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
Same
@@emiicrossing7576 did u fix it? pls help me lol
same
OMG SAMMEE
Umm mine were working for a good 15 minutes then turned off and never came back on🤦🏽♀️ive made sure everything was connected. If you can please give me suggestions 😭‼️
hmm mine only work when i point the control to the plug where u connect them. try that lol
are they still not working mine isnt
Same :(
When I do one colour the other strip goes to another colour. And now my red coloured row doesn’t work at all, only one strip and the other doesnt
Problem: RGB/RGBW strips: My LEDs are showing a different colour (full colour affected / not working)
Reason: if all of all of the LED Strips colours are working other than one colour and this is the full colour along the strip not working . EG, the whole of the Red colour LEDs are not working , then there is a fault with either the soldering of the red cable onto the board, the red cable is faulty from the strip to the receiver or the connection of the red cable into the receiver is faulty / disconnected. There is no way that the Red LEDs are all faulty, as the way they are made is if a LED is faulty then it only affects the section within the cut points. Therefore the issue is around the cabling.
Solution: Check the cables between the controller and the strip, especially if you have extended them check the connector block. A test would be to wire the power supply directly to the strip cutting out any extension cables and any control gear. And note that black is always positive + for RGB/RGBW. so wire the positive from the power supply to the black cable on the LED strip. Then wire the negative from the power supply to the colour that isnt workings cable. lets say the blue cable as blue is not working. At this point you should then see that the bluelights will light up, proviong that they work , and meaning you have a bad connection someone else, so then rebuild the system adding the controller and extension cables if you have them and see where the issue is now knwoing that the blue does work. If at this point theblue does not work at all, then check if the cable has come off the solder pad on the strip as this is the only reason left as to why it would not work.
OR
Problem: Whenever I select colours for my RGB/RGBW strip they are all wrong
Reason: You have crossed over the cables into the controller. if for example you have wired the red cable into the blue terminal and the blue cable into the red terminal on the controller, whenever you select the coluors on your controller they will all mbe mixed up and showing wrong colours to what you are selecting
Solution. You must check that the cables are not crossed over and re-wire them into the correct terminals. If you have extended the cable with a cable connector you must also check that. Sometimes the cables can be touching so red and blue may be touching and you need to seperate them so the connection is pure
@@InstyleLED don't get u at all??
@@InstyleLED bruh what i don’t understand u at all
Hi, what 6 core cable would you recommend to run 5m from the LED to controller? Thanks
Hii could you help me? When i turn the light on, if i press red it turns off or it becomes green, thats the same thing with all the colours, and the fades and only green too. I tried to change the battery, plug it in and out etc
My led lights won’t change color like in the controller so I only have RGB together
Try some tests on here to see where the fault is and if you can resolve it www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
Thank you for this video it was really useful because I wasn’t quite sure what it was that had made my LED’s just stop working completely after I had accidentally painting a tiny bit over some of the strip. Is there anyway of getting them to work again?
You're explanation was too situational I JUST installed mine and haven't painted and it's still uneven.
Have you fixed it
If so can you tell me how
hi i got two different led lights and they are connected but one of them is showing up duller. do you have any recommendations as to what i need to do to fix this?
for me the problem is that i have the 32ft one (day better) and one roll is turned on white but when i connect the other roll to the 2nd plug red and green works but blue isn’t lighting up so one roll is white and the other is green mixed with red with no blue to balance it out to create white for both rolls
Mine aren’t turning on:( and I just got them for my birthday:(😭
Same here. Any luck?
I just got mines for my bday and when I turn them off, they turn red and stay on!!
I feel the pain
@@tarannhill3112 and know???
Only like a ft of my LED strips work when I first putting together they worked fine then I turn them off to put them where I wanted to put them now only a ft turns on. Help
Can u pls help me? I bought brand new led light strips but when I press to put a color on the remote it’s jst either blue or green, it also doesn’t want to turn off
pls help me, when i press a certain colour on the remote it shows up as that colour but only on one half of the whole strip and the other half is either different shades of green or just blank. i would really appreciate if u could help
It's because one of the resistor is faulty or damaged. You either have to replace the led roll or cut that portion off & rejoin.
Hi my LED lights keep on changing colors when I click a button on my TV remote please reply or make a video about it.
Hi , this sounds like you have a infrared controller for the strips and the infrared signal from your TV remote is controlling the lights also. I cant see a way to resolve that unless you change your LED strip controller. We dont supply Infrared controllers, we supply Radio frequency instead (RF) so that there can be no interfearence from other controllers.
Please answer this comment so my lights half of them are white and when I change the color only the other side changes and the other side stays white but they worked fine a few days ago please I really need help
I have these luma strip $5 ones and if i turn it off its green and all the colors are that plus green it just wont not be green any answers?
I applied then to my wall and for some reason they're not light . When I press a certain section they light up but when i don't put pressure it doesnt
Same!!
My LED's were working perfectly before, all of the buttons worked and the colours corresponded correctly. Now, every colour is mixed up, but I didn't do anything different. For example, I'll press light blue and one of my strips will turn a green while the other turns magenta. I don't know why this has happened.
Did you figure it out ?
I have the same issue
Help i just want a nice pink room and some of them are red😭
So i havent connect my Led lights in a while finally i connected them i connect both leds together eith eachother and half of one of the leds dont work could it be because of how long they werent connected?
Hiii can you please guide me how we can fix ?
Actually we were installed the profile lights in fall sealing and when painter do the primer in fall sealing may be some spots going inside the aluminum pannel and due to this some of LEDs are going to glow in yellow color.
Now I want to clean the LED strip and need your guidance how can we clean the complete strip of only the yellowish LEDs.
which chemical / petrol / thinner or nail paint remover we can use ?
waiting for your quick respond .. or any detailed video if you have on the same please share the link.
Thank you so much
i got another role to finish my room all the way around. and when i press white the new rolls go like greenish yellow while the rest is bright white.
your blue cable isnt attached properly / faulty . as red, green and blue all working will be white. if just greenish yellow then there is no blue working
@@InstyleLED mine do not work after using them for less than a day, the remote doesn't do anything
InstyleLED okay so how do you fix that
I was rearranging my room and it just stopped working. Doesn't turn on, I've tried everything, unplugging, replugging and nothing. My room looks wack with just one spot of no LED lights
Try looking through this guide www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
Why does one of my lights consistently go to the next color but the other strip does color then goes blank and does another color
I have a couple problems, first one is I have 2 lights strips connected to each other but only one of them works (the one connected to the power). And the only colours that work or different greens and reds, white doesn’t even work. Whenever I press blue it just turns off and any other colour is either just green just red or both of them together (edit: I’ve fixed the other strip not working)
My colors are all mixed up if I press Green it's Pink and half of them don't even work. On some of the colors it's like pink then fades into orange for three lights the back to pink. When I turn it off it's a dull blue.
same omg
Same but when I change the color one side changes when the other doesnt. Like 1 side is orange and the other is green
Goth ic Same !!!
@@solefreakks7905 yea I have 2 get new ones -_-
How you can fix this?
Problem: MY LEDS ARE FLASHING
Reason:
If your LEDs are flashing in a regular, consistent sequence (e.g., on for 1 second, off for 1 second, then on for 1 second again), then your power supply is overloaded! This means you have too much striplighting connected to that power supply.
For example, if you have 10m of LED strip that draws 5 watts per metre, the strip requires 50W in total (whether it’s two 5m strips or 10x 1m strips, it still adds up to 50W). If those strips are all powered by a 30W power supply, this will go into overload protection mode, which means it will turn on, realise it is overloaded and immediately turn back off again, then keep repeating this cycle.
Solution:
You may chose to get a larger power supply that can handle the total wattage required, so a power supply higher that the total wattage of all your LED strips.
Or you could get another power supply of the same size as you already have, and split the strips across 2 power supplies.
Or perhaps your project will allow you to reduce the amount of strips onto that power supply.
Video link ua-cam.com/video/zbqHSojCJBM/v-deo.html
Can someone tell me if does sections thats not working will affect the other lights that are working. Some section of the color green is not working will it damage the other green lights that working?
do you know why my led light remote may not be working i just replaced the battery today
I got some led lights today they worked perfectly fine ,about 3-4 hours later they stopped .i waited about 2 hours to see if they would work after but they didn’t I tried using a different adapter which still didn’t work .help what do I do
One of my light strips do only blue and the other does blue and green, the other two are perfectly fine
Try finding your fault by doing some tests from here www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
same and i dont know how to fix it, have you found something?
does anyone know why one of my strips don’t match the same amount of brightness
the first strip is a whole lot brighter than the third strip
My led lights are only turning blue and the remote doesn’t work but when i plug them into my sisters it turn red and one of them is blue and another square is green!! HELP
Use this guide, it will tell you the tests to do to work out where the issue is and how you can resolve it www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
Problem: MY RGB/RGBW LEDS ARE SHOWING A DIFFERENT COLOUR (full colour is affected or not working)
Reason:
If all of the LED strips colours are working except for just one colour, and this is affecting that colour all along the strip (e.g., the whole length of the Red colour LEDs are not working), then there is either a fault with the soldering of the Red -ve cable onto the strip’s PCB, or else Red cable is faulty from the strip to the receiver, or the connection of the Red cable into the receiver is faulty or disconnected.
We can say this with some certainty, because here is no way that full length of Red LEDs are all faulty; the way LED strips are made means that a faulty LED will only affect the section between those cut points. Therefore the issue is related to the cabling.
Solution:
Check the cables between the controller and the strip, especially if you have extended them with a connector block. An effective test would be to wire the power supply directly to the strip, thus cutting out any extension cables and any control gear. And note that black is always positive (+) for RGB/RGBW strips. so start by wiring the positive from the power supply to the black cable on the LED strip. Then wire the -ve from the power supply to the cable for the colour that isn’t working.
Let’s imagine that it’s the blue cable that is not working. In such a case, you should then see that the Blue lights will light up, proving that they work - which means you have a bad connection somewhere else. With this knowledge in mind, rebuild the system step-by-step, adding the controller (and extension cables if you have them) and see which component makes the Blue lights stop working.
(If at this point the Blue does not work at all, then check if its cable has come off the solder pad on the strip, as this is the only reason left as to why it would not work.)
Ugh, this my issue but I'm not smart enough to understand this explanation.
Yo man, so my led strip works perfectly on one half of it and the rest of the strip won’t light up at all.. any idea what’s going on there? 🤔
Same thing man
felt
Brett Wohlford is the issue fixed
hi! So my led lights are three different strips that are connected together by connectors but the first one is bright and the second is dull and the third is much of a different color then those ones. For example when there white the third one is yellow. But when there red the second one is orange and the third is nonexistent. I have no idea of what this is and if you can help.
One of my light like one bulb on the strip is a different color then the rest of the strip what do I do?
I just put mine up and they are like faded and only work when I put pressure on them please help me I have cried for an hour
i have the same problem i’m so upset
Do they work now?, if so what did you do?
OMG SAME! 😭😭
Hello I need help I accidentally used the wrong controller while the rgb yo turn it off and not they only way to turn off my rgb strips are to unplug them like if the power buttons don’t work
Why does mine show 3 lights in different section discolored like when I put orange three of the lights in did sections turn green
Problem: MY RGB/RGBW LEDS ARE SHOWING A DIFFERENT COLOUR IN SOME SMALL SECTIONS OF THE STRIP (e.g., 100mm not working)
Reason:
Are your LED strips working fine for most of their length, except for one section or a couple of sections within the cutpoints of the tape? (e.g., when you select Orange, a 50mm or 100mm section shows Green only.) Well that means the Red LEDs within that section are faulty. You can easily confirm this - if you set the strips to just Red then on that section they will be completely unlit, and if you set to Purple that section will show Blue only.
RGBW LED strip with a faulty circuit section (dry joint)
This can be very confusing when you install your first LED project and see these colours not matching. But the answer is simply that one colour of the RGB/W LEDs is not working within that section and needs replacing. This can be caused by static-electricity damage, or bending and twisting the strip too much, or being trod on, damaged in transit, a cheap poor-quality strip, or dry solder joints.
LED strips are made up of 50mm / 100mm sections (sometimes other sizes), and wired in a way that means each section is a discrete, enclosed circuit (in other words, if a LED or resistor is damaged it will only effect the section of strip within the cutpoints).
If the complete section between cutpoints is not working, this is a very similar problem to a damaged LED or resistor - most likely caused by a dry solder joint.
Solution:
In most cases here the only option is to replace that section of the strip. You can do this by swapping the full strip. Or you can get another, say for example, 100mm section and solder this in - or you can use connector clips to clip in a new 100mm section.
Before taking this step, it’s worth attempting to touch or press down on the LEDs/resistors in the faulty section - in the best case possible, you may see that the light miraculously comes back on; in this case the problem is a dry solder joint, and if you’re capable of soldering you can repair this strip!
ua-cam.com/video/OY-wwlriHqQ/v-deo.html
They were fine this morning but how a group of them are red when I want purple
Mine dont turn on and i have good bateriess!!!
Same
mine have 3 lights in a few places that are the wrong color like when i press purple those spots are red what is wrong with them i’m confused
I bought led lights, they arrived just today and for some reason there’s two different colors on them? It still shines the color i pressed on the remote, but it shows 2 colors on the led lights.
My led light were working just fine, I was messing around with the remote and they turned off all of a sudden, I tried everything and they won’t turn on. Plss send help ;((
There are remotes that if you hold the buttons down for 3 seconds they turna zone off, if hold down again for 3 seconds it turns that zone back on.
Or see the pinned comment above for some good answers
How come my light strip only turns white and won’t change colors? Even when I press the button?
Do you have a RGB/ RGBW set up?
Sometimes when the controller is nopt paired corrently to the receiver, whatever you press it will stay on its default mode of white. Therefore you would need to pair the remote to receiver to get it to work. Its hard to say exactly without seeing your system. If you have any pictures I can help
www.instyleled.co.uk/support/troubleshoot-led-strip-lights/
InstyleLED ok I figured it out, it was the adapter/plugin part of it I had to order another part, but the led light strip was fine just the adapter
mine are all the same color but as it goes along it gets dimmer so when the beginning and the end meet up they are two different shades of the same color. what's wrong?
My sister thought she unlocked a new color as if the strips were a video game
when I click blue the LED lights turns blue.
Problem: MY RGB/W LEDS ARE ONLY LIGHTING UP A LOW (RED) GLOW
Reason:
You have a 12V power supply going to 24V LED strips.
Solution:
The only option here is to get a replacement 24v power supply for your 24v strips.
OH NO....
hi so I've watch alot of videos on how to fix my led lights but none of them seem to work I've tried cleaning my remote and nothing happens like one day they just stopped working can you help me?
My lights only work on red green and blue. when i put it on a different colour eg pink , it goes to blue and red and you can clearly see the two colours and no pink please help
same omg did you fix it, please tell me how!!!
@@amberd108 did u ever figure it out???? im so desperate aaaa :(
amber x no i never :((
okay so i was straightening my led light on the wall i had them up for a while and i had to bend them to fit correctly and the little section turned a different color with red and green it’s the same color but for all the different colors that little section is different how do i fix this?
I'm facing the same thing but but it happened with no contact at all like no paint nor silicon what's the reason for that n how can I fix
so i got daydream lights, and the first strip lit up and i was able to change the color, but the second one also lit up but wont change color. please help i cant find a video about this
When I press white on my remote only a small portion show up white on the first strip and they all slowly fade into a yellow. How do I fix this. It’s been like this since I put them up.
Dead ass same, you fixed yours?
when i press my LED lights it turns wierd. When i press white for example, it gives me red,blue and green! i searched up all the reasons but then it doesnt come out. help!
My lights are only green and blue and when I click red or pink on the remote it just gives me some type of green or blue plz help, also it was thunder storming and if closed and opened back up
for mine i cant set diy colours, can only change the brightness down or up once then i have to disconnect then reconnect them, and a certain 3 lights on my strip are a different colour,
*help me*
hello i need help the leds do a weird thing it stays blocked on one color and twinkles even if i press on another color the remote control does not react you can help me please 🥺🙏🏽
i have three strips i connected them and only one turns on but i tested all three of them before i put them up and they all turned on so i’m confused
When I put blue it only does one side and when I turn it on and do many different colours it only does rainbow and it doesn’t stop flashing and I can’t turn it of it took me 6 hours to get one strip working and I’m getting annoyed
i’ve had a problem with mine for awhile i changed the battery in the remote but it won’t work? my led’s are plugged on but when i try to use the remote to change to other colours it stays on green, trying to turn it off with the remote it stays green and trying to turn it on its still green?? so i’ve just turned them off completely on the wall
I have 2 strips of led lights each 16 feet, and one strand is green and won’t change to any other color, but the other strip is normal.i wanna make them both the same, help?
When ever I put my led lights to white the other one goes a little darker white but it’s not where u connect it it’s in the middle of the actual strip not where you connect it tho pls help
Mine just keep turning onto the strobe effect on they’re own, I’ll change it to a colour on the normal settings then 30 seconds later it just turns to the strobe effect, I only got them today as well, do you know why this is?
Can someone please help me!
my ledlights turns on but they are blue, the remote controller works if i look at it but it wont turn on/of or change color
On the side that’s closer to power the light is brighter. But the strip farther from the power is more dull and gives out a slightly different color. Can you tell me why?
I need help my led lights are being super werid when I press white and any other light color it mixs it with yellow red or green
I have 2 strips connected to eachother but like for example if i press orange one strip would be orange and the other strip would be pink pleasee helppppp
i have one of the remotes like hers but only five of the buttons work which is red, blue, green, purple and the on/off button does anyone know how to fix thissss
some of my colors are good. some colors aren’t. when i have blue one of the strips don’t even turn on at all. then with some colors one strip is the wrong color while the other strip is the right color. idk what to do. i need help.
SAME WITH ME
my led lights worked but a couple weeks ago i tried to turn them on it wont turn on what do i do
My led lights won’t let me use any other colour except blue or green tones. Is my led broken or do I need to do something else to it?
So I can change the first part of mine any color but the rest are just blue and a faint amount of blue. Please help me with an easy fix!
My led lights are stuck on the colour purple and they won’t change is there any way I can change this?
My led lights are 2 different colors like I'd I press blue half of it is gone and if I press red half of it is green anything will have half green or won't work please help.
Any one help please when I click on the blue top button it doesn't give any colour as if it is closed and but the red and green button works??
When I try to enable animations for lights they just turn off. Any solution?
My light has 2 spots that are a different color for example if i have white on 2 light things are yellow if i have purple its red im confused
My green lights stoped working on one of my strips so I tried connecting a new roll of lights and the green lights STILL won work! I spent all my money on these and I used the green ones a lot and then it just stops! Helpppppp
did you ever fix them?
Mine are doing the same thing rn
@@ninaankrah2867 hey so I kinda just fixed mine if you still need it. All I did was move the connection around my wire is odd but I unplugged it and attached it again but try to level the connection cord a different way like of it is hanging down on the wall
@@carriezaher2707 I can’t even remember how I fixed mine tbh but like they work now soooo😅
Mine all of a suddden are uneven, when i turn on blue rn its like 8 cm of the led stips thats not working, and it wasnt like that before, but its just fine with red and green, idk if i have used the blue too much but pleaase reply back! )Everyone can)
Any luck ?
Mine turn on but they only stay white but when I try to change the color my remote it doesn’t work. Like the remote light turns on but the strips don’t work
Hi so I just bought my led lights and they worked great then they just stop is there any way to fix them
Are they colour adjustable RGb or jsut white?
So my problem is that all my colors work but when I press White most of my room turns white and then the last part of the strip turns red how can I fix that red do I need to just unplug the connectors and reconnect it again or is the white fuse on that strip blown out somehow?
Hi. Mine doesnt work we tried fixing and reseting the wires but it really doesnt do anything. Send help pls
I’m don’t know what brand mine are but a lot of them seem similar so maybe someone can help me but basically they’re just stuck on one of the color changing modes. I know it either has something to do with the remote or the little “IR receiver” that’s connected to the “control box”. There were a few times a while ago when I was able to make the lights change to a different color by holding the little light on top of the remote to the receiver thing and tilting it around til it change but then it would get stuck on whatever color I changed it to. It shows the color of whatever button I pressed but just couldn’t change it. I’m not sure how to fix it.
I have had my led lights a few months now and they've worked perfect but i woke up this morning and 8 in a line of one section are now red when i put them on purple or pink and when i press on blue they won't work at all it's very puzzling and when i turn on plain white that 8 of them in the section is yellow i haven't painted or anything that might damage them.
How do I fix my LED lights if its broken at the end/connecter
hi i really need help but i dont know how to fix my led lights its not turning on
plss helppppp
So my led lights stopped working and right before they stopped they flashed through colors and then turned off and now when I press on the light strip on like those little metal boxes I can see some color
I just bought the teckin led strips and now I cant change colors. Its stuck on green and the buttons in my remote only make the color dim, brighter, or just turns them off, its so annoying