How to Replace Rear Spring Assembly 11-14 Chrysler 200
Вставка
- Опубліковано 25 сер 2024
- Buy Now!
New Strut & Spring Assembly Set from 1AAuto.com 1aau.to/ia/1ASS...
This video shows you how to install quality, new TRQ rear spring assemblies in your 11-14 Chrysler 200. Head over to TRQAutoparts.com for more info.
• Check here for more videos on the 2011-14 Chrysler 200: • Chrysler 200 2011-2014...
This process should be similar on the following vehicles:
2011 Chrysler 200
2012 Chrysler 200
2013 Chrysler 200
2014 Chrysler 200
Tools you will need:
• 18mm Wrench
• 15mm Socket 1aau.to/oaR3/1A...
• 18mm Socket 1aau.to/oVQ/1AX...
• 19mm Socket 1aau.to/oVQ/1AX...
• Trim Tool Set 1aau.to/oPf/1AX...
• 1/2 Inch Air Impact Gun 1aau.to/oms/1AX...
• Ratchet 1aau.to/oa6q/1A...
• Torque Wrench 1aau.to/oad9/1A...
• Hammer 1aau.to/oHU/1AX...
• Jack Stands 1aau.to/oIz/1AX...
Subscribe: / @trq
Check out our playlist:
Chrysler 200 2011-2014 1st Gen: • Chrysler 200 2011-2014...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I just did this today. Less than $150 through TRQ for the parts, and about 30 to 45 mins of my own labor. Thank you TRQ. You saved me a lot of $$. I am getting my parts through you for now on. This was crazy easy to do. God bless.
$150 for both driver and passenger or just one side?
Wow this looks a lot easier compared to strut replacements i've seen for other cars
Is there a difference between left and right strut assemblies for front and back? I’ve seen some posts that say only the rear has a difference, and the front are both the same. but when looking at parts I only see a difference in the front ones.
Excellant Video !!! Thanks.
+Rich Smith Thanks for watching our video! 1aau.to/m/Shop-TRQ
Should you tighten the top nuts with the car on the ground?
What?? Its that easy! everyone ive talked to wants 800 to 1200 dollars to replace my rear struts....
Exactly ...I'm trying to figure out what years of experience I'm actually paying for with this one.
I work at a dealership. Our hourly rate is $130.00/hr. Our markup on parts is in the area of 42%. Of course, I never pay to do things for which I can find help on youtube. Everybody saves a bundle. I would advise you, if you don't have many tools, to just buy the ones (go for quality) you don't have for each job you take on. That way, after a couple of years or so, you'll have a solid collection of decent tools and enough know-how to feel quite confident taking on any of the simpler car maintenance jobs. You'll save SO much money over the years.
Thanks a lot for the great video!
Does this same pro-cess apply to dodge model avenger se 2.4l 2011-2014?
Do you need align the wheels after ??
+@Gunz089 Yes, an alignment should be done after installation.
is it really necessary to torque it at 41 & 73 foot pound?
No