I have my ram and cpu installed already, do you know if I have to take them out to flash bios, or should it be fine. Im running 5600x/Aorus Elite wifi x570
Hi! I'm a noob at anything pc here but trying to learn. My current build is using a 3700x and I want to upgrade to the 5800x. Will I need to remove everything from the motherboard to do this bios update for the 5800x? Just looking for clarification. Thanks for your vid!
This was the last video of yours I watched so I figure I'll comment -- you are the only person who's videos helped me build my computer. I was stuck trying to flash my bios for my ryzen 5800x but nothing worked. I had no idea I didn't need the entire folder, just the file. After following your steps to a T the orange light finally started posting and the flash is now working. You may not even read this, but your guides are incredible. Thank you sir.
Great video :D For anyone having trouble with the q-flash button on the board itself, if you happen to be using an external drive make sure to specifically only format a small(i used 8gbs) sized partition as exfat/fat32 instead of formatting the entire capacity of the drive. The q-flash button wouldn't work for me until I limited the fat32 partition size to 8gb on my 1tb external drive as opposed to formatting the whole 1tb as fat32. Fixed the issue and the q-flash button then worked like a charm. Hope this helps anyone running into the same issue! gl out there gamers
I'm using a 64G thumb drive, used rufus to format it to FAT32, and copied the gigabyte.bin file to it, but I still can't get a flashing light from the q-flash button. Any ideas on where I may have gone wrong?
@@FifthPinned Only thing I can recommend is formatting only an 8,000 MB partition as FAT32 and using that partition to store the gigabyte.bin file. That's the only thing that got it to work for me :/
Exactly what I needed. I just bought this same CPU and motherboard and then I saw that it may need a BIOS update. Thanks for the great step by step instructions on how to do this.
This video saved me hundreds of dollars yesterday. I got a new cpu, power supply and grahics card and nothing worked. I sat on the ground for hours, trying to get my pc to run. I was about to buy a new mainboard since it would not boot anymore, and maybe even cpu., All I had to do was flashing my bios. THANK YOU!
Thank you! I should have looked this up before installing my new 5950X last night, only to have to put the old CPU back in since it didn't even post. After initial panic and checking that I hadn't bent any pins I soon realized that I probably needed to upgrade the BIOS first, and this video gave the perfect instructions for it. *edit:* I forgot to mention, at 5:51 it says "I haven't installed the CPU or the RAM […] you can do it with it installed or not installed", but the manual says "Q-Flash Plus will update the main BIOS only if run *without the CPU* installed." (mb_manual_x570-features.pdf, page 6).
@@dlalleman3874just updated my bios with the cpu installed and it worked just fine. HOWEVER the flash button wouldn’t do anything for me until while the system was shutdown I flipped off my power supply waited a few seconds and turned JUST the power supply on, and while the pc was still shut off I hit the flash button and it worked perfectly. Hope this helps anyone who was confused
This video helped thanks a ton. Just got a 5950x and almost panicked. Did some research and someone mentioned the 5000 series may need bios update. Saw someone had mentioned swapping back to old cpu but i knew thatd take too long. Looked up alternate ways to flash bios and turned out my x570 can do so. Thank you so much for your help!
thank you thank you! it's worth mentioning that using the default allocation table size may be required when formatting the flash drive. I tried this and it didn't work the first time with the allocation tables set to what windows had set, but... when i applied the 'device defaults' and tried again. worked like a charm. Thanks for the great video.
I should've searched this up over a year ago. I've been holding on to upgrading my 2700x for my 5900x for the simple reason that the BIOs update seem so alien to me. LOL this was an awesomely enjoyable and easy to follow video. Thanks a bunch!! awesomeness
Wow I was behind like 4 updates. Thank you for the indepth guide. My bios had a bios command in the setting that you could boot it from so I did that way. Worked well thank you!
You're a life saver. Was trying to extend the life of my AM4 board by going to a 5800x3d and didn't even think about having the update bios until I already had everything installed and it wouldn't boot lol.
I'm a late bloomer, just got a used motherboard like this one. It didn't work, nothing no power or anything. I just followed your video, so now the BIOS is being updated, hopefully that will fix it. :) I watched several videos, before finding yours, thanks.
Thanks for the video. I had a really unstable sytstem after installing the F35 bios on and Aorus Ultra and was at the end of my patience / skills trying to resolve. I follwed your video and I now have a stable system. It's much appreciated.
Just got a conflict on PC Part Picket for a 5800x / X570 MSI for upgrading my stream, at least its just a bios flash, never had to do a bios flash in over 20+ years working with PCs / Hardware so appreciate the video fam =)
I wasn’t able to figure out if it’s possible on a mac, so I borrowed my aunt’s laptop and it worked fine. Thank you for this tutorial, it helped a ton!
I just bought v2 of this board, but it is mostly the same thing. The only difference is the location of the QFlash plus button. Looking forward to putting this together later this week once my graphics card is in. Went ahead and pre-flashed this so I can save some time build day!
Q-Flashed before anything else here, and thanks to your help, it went good! Apart from a goof up on my end downloading the wrong bios (I have the X570 Pro Wifi, and I downloaded the x570 pro. The webpages look fucking identical.) Thanks for the short and concise tutorial.
@@boughtonpresale4232 it was just the mobo, a usb stick with the bios, and the power supply. It was easy. I used the manual and this video as a visual aid since since diagrams in manuals can be quite vague in some places and I'm more of a visual person.
On the Gigabyte website it refers to the wifi version as rev. 1.x and the non wifi version as rev. 1.0. The weird thing is... my Aorus X570 Elite wifi board literally says rev.1.0 on the board itself. So now I don't know if I should download the rev.1.0 BIOS or the rev.1.x BIOS. ???
I am now ready for MW2 =) My 3080FE is already installed my X570, as of now I'm running my 3700x and it's running amazing on 1440p for all my titles. My 5600X just came in and I got it for a steal on Amazon. $88.35 because I had a $100.00 coupon that I didn't know about lol So I'll stay gaming and just wait for MW2 to come out, when I see the need to try and push more FPS I'll bio update and slap my new chip in. Thanks for the video, didn't realize how easy it is to update bios on this MOBO. Supper happy I bought this one back in late 2020.
Thank you so much .. I am building my first gaming PC .. I become sad when i didn’t see and video signal on my monitor .. your clear explanation helped me to solve my issue thank you
Massively helpful as I just bought the gigabyte z490 that supports 10th and 11th gen Intel but requires a bios update. This is the only part that makes me nervous on this build
@@NorthernVikingEveryday I do have a question though. It looks like the support for 11th gen was a couple updates prior. Should I update to the most recent or just the one that has support for it? Or is that all in the newest update?
@@NorthernVikingEveryday I just wanted to pop in and say thank you for your video and responses. Built my PC yesterday and it worked swimmingly. Thanks again man
I just did this for the Aorus Master. It was very picky about USB drives. Nothing happened during a few attempts with the first two (different models). Then I found an older Sandisk SD card with a USB adapter, and that worked perfectly. All were formatted as FAT32 from windows 11. I’m not sure what the difference was. All up and running now. First time going back to team red since their Thunderbird days!
Ok, so I just followed this tutorial to install the latest in my non-wifi x570 elite and almost shat bricks, first attempt and no screens, no keyboard/mouse led's, no cpu fan LEDs nothing. Redid the process and on the second try held the q-flash button for 10 seconds before releasing, happy to report that it completed properly this time, if you encounter this same issue, you may have only clicked the q-flash button, but you MUST hold it down for that 5-10 seconds.
I know this is an old thread. But I just want to add, I have the x570s. I accidentally downloaded the x570 bios. Tore my pc apart. Tried the usb and qflash with literally all my pc internals removed. Nothing worked. I tried from within the bios. I tried the @bios utility that you can download from gigabyte…All because I downloaded the wrong bios version. I forgot I had the “s” freaking… yup….Keep in mind…. I’ve been working as an IT professional for 15 years. I just want to say that so you know… anyone can have a holy crap how am I so stupid moment. It doesn’t matter who you are. That is all!
I noticed at 06:44 your x570 Aorus Elite WIFI board says "rev.1.1" on the bottom left corner of the board? My x570 Aorus Elite wifi doesn't. Mine says "rev.1.0" on the board. And yet, on Gigabyte's website they list the WIFI board as rev.1.x and the non-WIFI board as rev.1.0
If your light does not work, my fix was that my flash drive was far too large(128gb). I used an old smaller one (couldn’t have been more than 32gb-64gb) and worked fine. It also took a few seconds to start doing anything, so don’t be alarmed if it isn’t instant.
Hi, I just wanted to know can I use this way for my X570 auros motherboard with all the components installed, I have the CPU, ram, CPU cooler, and m.2 installed. The led did lit up when I press the button and it did turn off after 3mins but the fans and the RGB on my ram still and the fans on my Psu didn't turn off. Should I wait 30 mins then turn off everything?.
I flashed my bios from v11 to v35, for some reason on reboot it was bsod trying to pull a windows file from G: drive. So if this happens restart, jump into bios and set your boot options right to the drive that has your windows installed on it. Good luck
if anybody is watching this tin 2024, just a heads up. if your usb is over 32GB it wont format to FAT32 so get ya small USB or you can go into disk management, delete the volume of the USB drive, remake new volume, and allocate 8GB or 8000MB to be able to format it into FAT32
*Ok ok ok ok ok........I rarely say, I love somebody.......but damn it, you saved my life. I love you man* !!!! NOW I can decide either A. 5800x or B. 5900x and HOPE the board can accept 2 channels with 32 or 64 Gigs :)
I downloaded the newest edition like you said the f36e now, placed the usb into the bios flash back slot and press the button but no light goes on. Do you know why this would occur
Thank you so much for this tutorial. I installed the F36e version of the BIOS on my motherboard and i am facing a lot of issues with it. For example, in the bios screen it shows that my secure boot is enabled but when i log into windows and check system info, it shows secure boot off. because of this, i cant play certain games. after watching your video, i am planning to qlash and update the bios to F37 and see if that works out the issue or not. i would be very grateful if you have any insights on this. thank you once again for a great video. :)
Awesome video and really appreciate the effort and time to upload. I want to build an all AMD build but was finding the updating a little daunting. I imagine this is the same process for all brands? Looking at MSI currently.
Thank you for being so detailed. My x570 is also version 1.1 which made me hesitate to flash the board thinking that the newest bios version was for version 1.0 boards. unboxing mine, it had f30 bios. im running 5600x. Updating bios gave resizable bar. I was having issues connecting PCIE risers for more than 2 cards. Im not sure if the bios helped or if it was that I changed the bifurification to 4x4.
Great video man I just got a question. Since I have a zen 2 CPU and I'm getting the CPU you are using in the video can I update/flash with my old CPU, ram and GPU (that I'm not changing) in the motherboard or do I HAVE to remove them in order to update/flash the mobo.
I'm no pro, but I'm pretty sure you don't have to remove them. The more updated BIOS I believe just adds *additional support. Someone can correct me if I'm wrong.
Thank you for the help! I had one question: if I have the 5600X, should I stick with the F30 or just get the lastest BIOS version like you did? Will it be incompatible with the 5600X?
I pushed the button and nothing happened except for the usb flashing. Does that mean it worked? Also when I turned the power supply on the motherboard lit up for half a second then turned off. Is this normal?
Nevermind that I figured out my problem! I downloaded the bios update for the gigabyte wifi board and I actually have the non wifi version😂. Oops oh well I got the right bios update and non it worked. But one last thing. The fan continued spinning after the light went off. I gave it like 10 min but it kept spinning. I ended up just shutting it down after that. You think it still worked?
I have one question if my flash drive is 64GB and it says it’s exfat default but I do some coding and it changed the property to FAT 32 will that still work for the bios update?
This video is going to be a lifesaver, ok maybe that's over dramatic. But, I do have a question before I try. Can I leave everything plugged in as is, or should I remove anything?
Great video, thanks. I'm a little put off by Gigabyte's own warning on their website ... "Warning: Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. How do we know whether our BIOS even needs an update?
That is a good question, I'm not sure if they list which update the motherboard ships with. When I bought this motherboard I needed to update the bios so that it would work with my Ryzen 7 5800x.
👍 Thanks For Watching! Click the Link to Subscribe to Northern Viking Everyday. ua-cam.com/users/northernvikingeveryday
I have my ram and cpu installed already, do you know if I have to take them out to flash bios, or should it be fine. Im running 5600x/Aorus Elite wifi x570
Yes, you can Flash the BIOS with them installed.
@@NorthernVikingEveryday Thanks for the quick reply. appreciate it.
Can I do the bios update after I built my pc?
Hi! I'm a noob at anything pc here but trying to learn. My current build is using a 3700x and I want to upgrade to the 5800x. Will I need to remove everything from the motherboard to do this bios update for the 5800x? Just looking for clarification. Thanks for your vid!
This was the last video of yours I watched so I figure I'll comment -- you are the only person who's videos helped me build my computer. I was stuck trying to flash my bios for my ryzen 5800x but nothing worked. I had no idea I didn't need the entire folder, just the file. After following your steps to a T the orange light finally started posting and the flash is now working.
You may not even read this, but your guides are incredible. Thank you sir.
Awesome 👍 I appreciate your kind words and thank you so much for watching. I'm glad I could help you out!
I just upgraded from a Ryzen 7 3700x to a 5800X3D, and my pc wouldn't post. You sir, are a lifesaver; thank you for the very quick & simple guide
You're very welcome 🤗 Glad I could help.
Same upgrade I'm about to make
I am about to make the exact same upgrade/flash.
Same upgrade, my 3700x doesn't boot anymore. Should I just install the new CPU?
im doing the same thing on tuesday.
Great video :D For anyone having trouble with the q-flash button on the board itself, if you happen to be using an external drive make sure to specifically only format a small(i used 8gbs) sized partition as exfat/fat32 instead of formatting the entire capacity of the drive. The q-flash button wouldn't work for me until I limited the fat32 partition size to 8gb on my 1tb external drive as opposed to formatting the whole 1tb as fat32. Fixed the issue and the q-flash button then worked like a charm. Hope this helps anyone running into the same issue! gl out there gamers
Thanks for the tip 👍
I'm using a 64G thumb drive, used rufus to format it to FAT32, and copied the gigabyte.bin file to it, but I still can't get a flashing light from the q-flash button. Any ideas on where I may have gone wrong?
@@FifthPinned Only thing I can recommend is formatting only an 8,000 MB partition as FAT32 and using that partition to store the gigabyte.bin file. That's the only thing that got it to work for me :/
@@FifthPinned were you able to get it to work?
@fburnrostro95 yes, I can't recall what I did, as it was about a year ago that I did this lol
Your video was a bit longer than those I watched about the same thing, but yours was thorough and left me more confident about what to do.
Glad it was helpful 😀👍
Exactly what I needed. I just bought this same CPU and motherboard and then I saw that it may need a BIOS update. Thanks for the great step by step instructions on how to do this.
You're very welcome 👍
This video saved me hundreds of dollars yesterday. I got a new cpu, power supply and grahics card and nothing worked. I sat on the ground for hours, trying to get my pc to run. I was about to buy a new mainboard since it would not boot anymore, and maybe even cpu., All I had to do was flashing my bios. THANK YOU!
You're welcome 🤗
Thank you! I should have looked this up before installing my new 5950X last night, only to have to put the old CPU back in since it didn't even post. After initial panic and checking that I hadn't bent any pins I soon realized that I probably needed to upgrade the BIOS first, and this video gave the perfect instructions for it. *edit:* I forgot to mention, at 5:51 it says "I haven't installed the CPU or the RAM […] you can do it with it installed or not installed", but the manual says "Q-Flash Plus will update the main BIOS only if run *without the CPU* installed." (mb_manual_x570-features.pdf, page 6).
Can anyone verify if this matters at all?
@@dlalleman3874just updated my bios with the cpu installed and it worked just fine. HOWEVER the flash button wouldn’t do anything for me until while the system was shutdown I flipped off my power supply waited a few seconds and turned JUST the power supply on, and while the pc was still shut off I hit the flash button and it worked perfectly. Hope this helps anyone who was confused
This video helped thanks a ton. Just got a 5950x and almost panicked. Did some research and someone mentioned the 5000 series may need bios update. Saw someone had mentioned swapping back to old cpu but i knew thatd take too long. Looked up alternate ways to flash bios and turned out my x570 can do so.
Thank you so much for your help!
You're welcome 👍 Glad I could help you out.
Did you do it with your 5950x installed? Or did you remove it before flashing the bios?
How did you do wont work for me at all
thank you thank you! it's worth mentioning that using the default allocation table size may be required when formatting the flash drive. I tried this and it didn't work the first time with the allocation tables set to what windows had set, but... when i applied the 'device defaults' and tried again. worked like a charm. Thanks for the great video.
You're welcome and thanks for the tip 👍
YES, THANK YOU SO MUCH!! It worked.
Last night I had to flash the bios on this exact MB, for this exact CPU. Super helpful guide!
Awesome 👍 Glad I could help.
I watched 1000 videos and none of them worked, but this one did the trick. Thank you so much.
You're very welcome 👍
I should've searched this up over a year ago.
I've been holding on to upgrading my 2700x for my 5900x for the simple reason that the BIOs update seem so alien to me. LOL
this was an awesomely enjoyable and easy to follow video.
Thanks a bunch!! awesomeness
You're very welcome 👍
Wow I was behind like 4 updates. Thank you for the indepth guide.
My bios had a bios command in the setting that you could boot it from so I did that way.
Worked well thank you!
Awesome 👍 Thanks for watching.
Thank you! I have the exact same motherboard and processor and this helps me out very much
You're very welcome 👍 Glad I could help.
You're a life saver. Was trying to extend the life of my AM4 board by going to a 5800x3d and didn't even think about having the update bios until I already had everything installed and it wouldn't boot lol.
Glad I could help 😃
I'm a late bloomer, just got a used motherboard like this one. It didn't work, nothing no power or anything. I just followed your video, so now the BIOS is being updated, hopefully that will fix it. :) I watched several videos, before finding yours, thanks.
Good luck! Hope you get it figured out.
Thanks for the video. I had a really unstable sytstem after installing the F35 bios on and Aorus Ultra and was at the end of my patience / skills trying to resolve. I follwed your video and I now have a stable system. It's much appreciated.
Perfect 👍 Glad I could help.
Thanks so much, I just completed my first build with this MB and a Ryzen 5600x. Wasn’t getting an HDMI signal. This video was a lifesaver
Awesome 👍 Glad I could help you out.
what worked because im not getting hdmi signal
@@0henn_ I assume updating the BIOS as the video shows
Same issue but no fix :( I guess board is dead. I’ve tried everything
@@MicrowavedBunny any update? I’m getting the same thing happening to me and I’m really hoping my board isn’t dead.
Thankyou so much for helping me fix my pc, I have a super expensive pc and had a heart attack and just fixed it bro ILY
You're very welcome 👍
Just got a conflict on PC Part Picket for a 5800x / X570 MSI for upgrading my stream, at least its just a bios flash, never had to do a bios flash in over 20+ years working with PCs / Hardware so appreciate the video fam =)
You're welcome 👍 Glad I could help.
Finally a detailed video that helps a guy that made his first PC.
Thanks a lot Man!
You're very welcome 👍
I wasn’t able to figure out if it’s possible on a mac, so I borrowed my aunt’s laptop and it worked fine. Thank you for this tutorial, it helped a ton!
Ok I really appreciate your time in this video tutorial. As a man I can't say "ILY" but I do appreciate you my guy!!!.....😄😄😄😄
Glad I could help you out 😃👍
@@NorthernVikingEverydayYou already 💯 💯
I haven't updated my bios in awhile ... thanx for the reminders on what to do
You're very welcome 🤗
Omg I’m actually so dumb I couldn’t find the flash button and was searching up videos for so long LMAO ty your vid finally got my pc to work
Awesome 👍 Glad I could help.
I just bought v2 of this board, but it is mostly the same thing. The only difference is the location of the QFlash plus button. Looking forward to putting this together later this week once my graphics card is in. Went ahead and pre-flashed this so I can save some time build day!
Awesome 👍 Thanks for watching.
Thank you so Much NVE! Simple yet effective how-to guide.
You're welcome 👍
Lifesaver. Completely forgot to update bios before installing 5800X3D...
Glad I could help 😀👍
Q-Flashed before anything else here, and thanks to your help, it went good! Apart from a goof up on my end downloading the wrong bios (I have the X570 Pro Wifi, and I downloaded the x570 pro. The webpages look fucking identical.)
Thanks for the short and concise tutorial.
You're welcome 👍 Glad I could help.
Did you Flash it when your build was done or when nothing but the motherboard was connected to the psu?
@@boughtonpresale4232 it was just the mobo, a usb stick with the bios, and the power supply. It was easy. I used the manual and this video as a visual aid since since diagrams in manuals can be quite vague in some places and I'm more of a visual person.
bro this comment helped me so much i did the exact same thing.
On the Gigabyte website it refers to the wifi version as rev. 1.x and the non wifi version as rev. 1.0. The weird thing is... my Aorus X570 Elite wifi board literally says rev.1.0 on the board itself. So now I don't know if I should download the rev.1.0 BIOS or the rev.1.x BIOS. ???
This helped a ton! Something of note though is that i didnt need to power my cpu port for the qflash to work
Thanks for the tip.👍
Duuuuuude , thank you for this video . Its not easy to be a noob . It was so easy to understand and do while watching it .
Awesome 👍 Glad I could help.
I'm building my first ever PC,
Thank you so much for these videos! They're so helpful!!!
You're welcome 👍 Glad I could help.
I am now ready for MW2 =)
My 3080FE is already installed my X570, as of now I'm running my 3700x and it's running amazing on 1440p for all my titles.
My 5600X just came in and I got it for a steal on Amazon. $88.35 because I had a $100.00 coupon that I didn't know about lol
So I'll stay gaming and just wait for MW2 to come out, when I see the need to try and push more FPS I'll bio update and slap my new chip in.
Thanks for the video, didn't realize how easy it is to update bios on this MOBO. Supper happy I bought this one back in late 2020.
Awesome 👍 Thanks for watching.
Thank you so much .. I am building my first gaming PC .. I become sad when i didn’t see and video signal on my monitor .. your clear explanation helped me to solve my issue thank you
You are more than welcome! Thank you so much for stopping by and watching some of my videos. Much appreciated 👍
Thank you so much for a clean and well segmented tutorial, very well demonstrated and explained!
Awesome 👍 thank you for the kind words and support.
Thanks this worked out great. Saved my friends pc with this.
Awesome 👍 Glad I could help.
@@NorthernVikingEveryday 🐐🐐🐐
if your light still isnt blinking try and use the MBR partition instead of GUID. most videos show GUID as the correct format when MBR worked for me
Thank you so much, I recently ordered a 5900X, this will help me out a ton
You're welcome 👍
@@NorthernVikingEveryday Ok so it turns out you can update the BIOS through itself, I figured this out because the actual button did not work for me.
Massively helpful as I just bought the gigabyte z490 that supports 10th and 11th gen Intel but requires a bios update. This is the only part that makes me nervous on this build
Awesome 👍 Glad I could help.
@@NorthernVikingEveryday I do have a question though. It looks like the support for 11th gen was a couple updates prior. Should I update to the most recent or just the one that has support for it? Or is that all in the newest update?
For myself personally I would choose the newest update but it's up to you.
@@NorthernVikingEveryday thank you so much for your time and quick response. I will go with the newest.
@@NorthernVikingEveryday I just wanted to pop in and say thank you for your video and responses. Built my PC yesterday and it worked swimmingly. Thanks again man
I upgraded with no problems thank you very much my friend
No problem 👍
Fantastic video. Straight to the point. Easy instructions. Thank you sir!!!
You're very welcome 👍
I just did this for the Aorus Master. It was very picky about USB drives. Nothing happened during a few attempts with the first two (different models). Then I found an older Sandisk SD card with a USB adapter, and that worked perfectly. All were formatted as FAT32 from windows 11. I’m not sure what the difference was. All up and running now. First time going back to team red since their Thunderbird days!
Thanks for the tip. 👍
Yeah, I've tried a couple different thumb drives and nothing is happening... guess I'll try a different one, thanks for the tip
Great video straight to the point! I have the same processor and motherboard minus the WiFi. I’ll give this a try tomorrow. Thank you!
You're welcome 😃👍
Renaming it bin fixed my problems. I did it through the app center though. Thank you!
You're welcome 👍
Thank you sir! I forgot to update my bios before my CPU upgrade
Glad I could help 😃👍
Ok, so I just followed this tutorial to install the latest in my non-wifi x570 elite and almost shat bricks, first attempt and no screens, no keyboard/mouse led's, no cpu fan LEDs nothing. Redid the process and on the second try held the q-flash button for 10 seconds before releasing, happy to report that it completed properly this time, if you encounter this same issue, you may have only clicked the q-flash button, but you MUST hold it down for that 5-10 seconds.
Thank you for pointing this out! Glad you got it sorted.
Just upgraded my cpu to this will help when I get off work
Perfect 👍
@NorthernVikingEveryday so do I need to turn on my pc or just have my power supply plugged in and on?
Thanks mate for this amazing video it was really helpful for me, my regards from UK 👍
You're very welcome from Canada 🇨🇦
I know this is an old thread. But I just want to add, I have the x570s. I accidentally downloaded the x570 bios. Tore my pc apart. Tried the usb and qflash with literally all my pc internals removed. Nothing worked. I tried from within the bios. I tried the @bios utility that you can download from gigabyte…All because I downloaded the wrong bios version. I forgot I had the “s” freaking… yup….Keep in mind…. I’ve been working as an IT professional for 15 years. I just want to say that so you know… anyone can have a holy crap how am I so stupid moment. It doesn’t matter who you are. That is all!
Hopefully you're able to get it fixed up.
For anyone having issues, i had to hold my button for about 10-15 seconds
Thank you for this comment. I was straight starting to panick
Same. Thank you
super simple guide. Wish they were all like this. Subbed
Awesome 👍 Thanks!
Helped me fix my X570! Thank you very much!!
You're welcome 👍
Thank you so much. Great step by step instructions for every step of the process and made the whole endeavor very easy. Great video!!
Awesome 👍 Glad I could help.
Wow, thank you so much for this perfect and easy to follow video!
You're very welcome 👍
Thanks for this, man. Really helpful walk-through.
You're welcome 😃👍
I noticed at 06:44 your x570 Aorus Elite WIFI board says "rev.1.1" on the bottom left corner of the board? My x570 Aorus Elite wifi doesn't. Mine says "rev.1.0" on the board. And yet, on Gigabyte's website they list the WIFI board as rev.1.x and the non-WIFI board as rev.1.0
If your light does not work, my fix was that my flash drive was far too large(128gb). I used an old smaller one (couldn’t have been more than 32gb-64gb) and worked fine. It also took a few seconds to start doing anything, so don’t be alarmed if it isn’t instant.
oh mine is 32 gigs ish but it still isn’t flashing 😢
Mine is flashing, but it still didn't boot after installation. I have a 20GB fat32
Hi, I just wanted to know can I use this way for my X570 auros motherboard with all the components installed,
I have the CPU, ram, CPU cooler, and m.2 installed.
The led did lit up when I press the button and it did turn off after 3mins but the fans and the RGB on my ram still and the fans on my Psu didn't turn off. Should I wait 30 mins then turn off everything?.
Wondering the same 😢
@@dlalleman3874 what did y'all end up doing?
You’re a lifesaver! Thank you for these videos !
You're very welcome 👍
I flashed my bios from v11 to v35, for some reason on reboot it was bsod trying to pull a windows file from G: drive. So if this happens restart, jump into bios and set your boot options right to the drive that has your windows installed on it. Good luck
Thanks alot bro finallly ordered all the parts. Appreciate it.
No problem 👍
Dude thank you so much, I needed to learn how to q-flash anyway, so why not try it with my computer, I did buy a r7 5700x and had to flash
Awesome 👍 Glad I could help.
Amazing video with simple and to the point instructions. Thank you, it worked perfectly!
Awesome 👍 Glad I could help.
Exceptional guide my guy, thank you so much.
You're very welcome 👍
Way better then the manufactures crap youtube link, thank you.
You're very welcome! Glad I could help.
if anybody is watching this tin 2024, just a heads up. if your usb is over 32GB it wont format to FAT32
so get ya small USB or you can go into disk management, delete the volume of the USB drive, remake new volume, and allocate 8GB or 8000MB to be able to format it into FAT32
Thank you very much for this tutorial. Immensely helpful.
You're very welcome 👍
*Ok ok ok ok ok........I rarely say, I love somebody.......but damn it, you saved my life. I love you man* !!!!
NOW I can decide either A. 5800x or B. 5900x and HOPE the board can accept 2 channels with 32 or 64 Gigs :)
Awesome 👍 Glad I could help.
Thanks Kenny. Really helpful.
You're welcome 👍
Thank you my friend, you save my life!
You're very welcome 👍
I downloaded the newest edition like you said the f36e now, placed the usb into the bios flash back slot and press the button but no light goes on. Do you know why this would occur
I'm doing that right now and am having that problem did you fix it?
Down grade
So freakin helpful, thank youuuuu!!!
🙏🙌
No problem 👍
I'm assuming this also works with the non wifi version? Anyways, beautiful tutorial, so easy to follow!
Very helpful. Thanks!
You're welcome 😃👍
Just a quick Q before I proceed. What is the reason behind changing the file extension to .bin?
I'm not sure what the official reason would be but that's what it says to do on the gigabyte website.
Thank you so much for this tutorial. I installed the F36e version of the BIOS on my motherboard and i am facing a lot of issues with it. For example, in the bios screen it shows that my secure boot is enabled but when i log into windows and check system info, it shows secure boot off. because of this, i cant play certain games. after watching your video, i am planning to qlash and update the bios to F37 and see if that works out the issue or not. i would be very grateful if you have any insights on this. thank you once again for a great video. :)
Bro, did you install to F37?
Great helpful video!
Awesome 👍 Thanks for watching.
Bro you may have just saved my computer.
Glad I could help 😃
Awesome video and really appreciate the effort and time to upload. I want to build an all AMD build but was finding the updating a little daunting. I imagine this is the same process for all brands? Looking at MSI currently.
Hey if i have a 16gb usb sandisk who creates one sandisk file in the usb storage can i install with it in q flash
Thank you for being so detailed. My x570 is also version 1.1 which made me hesitate to flash the board thinking that the newest bios version was for version 1.0 boards. unboxing mine, it had f30 bios. im running 5600x. Updating bios gave resizable bar. I was having issues connecting PCIE risers for more than 2 cards. Im not sure if the bios helped or if it was that I changed the bifurification to 4x4.
You're welcome 👍 Thanks for watching.
I feel comfortable doing this now after watching this video.
But just to confirm, I can do this with the CPU and Ram plugged into the MB?
Thank you so much man! ❤
No problem 👍
Great video man I just got a question. Since I have a zen 2 CPU and I'm getting the CPU you are using in the video can I update/flash with my old CPU, ram and GPU (that I'm not changing) in the motherboard or do I HAVE to remove them in order to update/flash the mobo.
I'm no pro, but I'm pretty sure you don't have to remove them. The more updated BIOS I believe just adds *additional support. Someone can correct me if I'm wrong.
Great video, thanks
No problem 👍
Thank you for the help! I had one question: if I have the 5600X, should I stick with the F30 or just get the lastest BIOS version like you did? Will it be incompatible with the 5600X?
You can double check on the gigabyte website but usually it's best to go with the most recent version.
Thank you soooo much
You're welcome 👍
Great tutorial, definitley saved me alot of trouble.
Awesome 😎👍 Glad I could help you out.
Awesome video though but I don’t even know if I should turn on the computer or not for the light to start flashing
quality content! thank you!
You're welcome 👍
I pushed the button and nothing happened except for the usb flashing. Does that mean it worked? Also when I turned the power supply on the motherboard lit up for half a second then turned off. Is this normal?
Nevermind that I figured out my problem! I downloaded the bios update for the gigabyte wifi board and I actually have the non wifi version😂. Oops oh well I got the right bios update and non it worked. But one last thing. The fan continued spinning after the light went off. I gave it like 10 min but it kept spinning. I ended up just shutting it down after that. You think it still worked?
Had to make a comment. Thanks for the help.
You're very welcome 👍
Thanks bro!
No problem 😀👍
Thanks! Legend +1 sub
Thank you, much appreciated 👍
Try and use the MBR partition instead of GUID. most videos show GUID as the correct format when MBR worked for me
Great video! Quick question. After using a USB to flash the bios, will the USB be usable after that for general storage purposes?
Yes, you can just delete all the files off of it after you're done.
I have one question if my flash drive is 64GB and it says it’s exfat default but I do some coding and it changed the property to FAT 32 will that still work for the bios update?
This video is going to be a lifesaver, ok maybe that's over dramatic. But, I do have a question before I try. Can I leave everything plugged in as is, or should I remove anything?
Great video, thanks. I'm a little put off by Gigabyte's own warning on their website ...
"Warning: Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS.
How do we know whether our BIOS even needs an update?
That is a good question, I'm not sure if they list which update the motherboard ships with. When I bought this motherboard I needed to update the bios so that it would work with my Ryzen 7 5800x.