That truck brings back memory’s. Drove a R700 Tri axle dump truck in the 80s paving i95 at night. Back when truck drivers were real men Love those old Mack’s
Best exhaust note I ever heard from a truck was one of these with a straight through pipe dumping just in front of the rear axle. I was following it up a steep grade through a cut in the hill and the turbo whistle, coupled with the reverberation from the exhaust bouncing of the side of the hill, was truly eargasmic. When we reached a clear stretch of road I pulled out and passed the guy and noticed he was wearing heavy duty earmuffs, LOL.
Love the old Macks!! These were the trucks I was cutting my teeth on when I first started working on trucks for a living in 90. Have seen alot of changes over 30 plus years, still love the old iron! Didnt need a computer. Just basic tools and common sense!
Macks and Brockways hold a special spot for me. I got a chance to ride in Superliner powered by a 700 hp 998ci V8. 136k felt like 80k on a regular truck.
@Only4Trucks gotta tell you, it's like riding in a locomotive powered by an ALCO or EMD V16 turbodiesel. Same thump, same low resonance sound. Are you going to keep the 865ci V8 or swap in something else with better parts availability? The boat folks still run the marinized E9s, but they are not cheap. I like the V8s but doing a rebuild on any of the systems is silly expensive unless you have connections.
Thank you for watching! I think the R model was top candidate for construction and heavy haul! I agree they sound amazing. I appreciate you! See you on the next one
Drove R model Macks Superliners RD and CH Macks in my logging years but I think a clean decked out R model is my favorite. I envy you but then I don't cause you have one hell of a project there. For a 5 speed I bet that sucker has got some torque. Keep doing what you are doing and take it one step at a time. Good luck from an old log hauler...
I use to operate a Mack DM. MACK in my opinion is the best trucks out there. Your R700 is gorgeous. You are blessed to have that. By the way, few people know how to operate splits and manuals. I ran lumber trucks and concrete trucks all over the Rockies including the continental divide. I trained drivers as well for the company… lots of turn over. Regardless, have fun.
That reminds me of the day I brought home my old 68 Mack Cabover she was an old mine truck out of GoldField Nv, she started on ether at the old mans house , and that V8 Mack has such a distinct sound, quadraplex trans, twin stick, single axle rear end, loud azz wig wag indicator, ceramic clutch, no power anything, it was fun to learn how to drive truck on that (a few years ago) . I did have to get the massive remy starter rebuilt but she ran strong, shouldnt have sold that one.
@AreaDieselService gets a lot of love from other UA-cam channels. Diesel Creek has used them a couple times and Clint over at C&C Equipment uses them for his business regularly. Price is one of the downsides to playing with the big toys, even the cheap repairs ain't very cheap.
I'm very happy and excited for you and your new project. I know this is going to bring a lot of new viewers to your channel. Can't wait to see it finished and cruising down the highway!
What's up trucker Joe, I am liking the Mack truck. There's nothing like an older Mack truck. Can't wait to see the finished product, so take your time and do it right. Stay safe out there my friend and keep the videos coming, catch you on the next one.
Thank you! I agree there's nothing like them! And I definitely will be doing it right. I want to be able to enjoy it when it goes out. I'll do my best, you do the same and stay safe, see ya on the next one mark
I have a '75 R700 equipped identical to yours. I went through your thread for some fuel system pointers. Mine ran perfect and then suddenly one day wouldn't pull fuel. Was hoping you'd have found your smoking gun. Love the Gold Dogs! That blue one is a real beauty with that vintage lowbed. Actually everything you folks have going on is pretty sweet!
Sweet man! I will definitely get it going here soon and I'll try to teach you all I can! Yea man Tony's truck is beautiful! I really appreciate that! Thank you for watching!
Small fuel pump on side of eng block.old cloth covered hoses.change all suction side hoses.there is a hose behind injection pump.you can't get off.get a new hose zip tie to old hose.those hoses suck air.you will see the fuel filters low on fuel
That's where I'm at right now. All new lines made up this week. Noticed some were weeping going over to the filter. Figured they were all bad. Thanks much!
Now that’s funny. I ran out of that yard driving for Cunningham up until May.. I know all the guys. Hopefully you got a tour of some of the stuff that was there. It’s a Goldmine..
Back in 06 I worked for Stettler county, they had the twin to that truck, it was a 72 super clean. They hauled equipment with it. I had never seen a 700 before especially with a v8. Just found your channel 👍
my dad was in the North Jersey chapter of the ATCA and as a kid we would go to the Amaducci brothers garage and have a meet. this was back in the early 80s, but the big meet was always in macungie pa
That’s a very cool truck. The perfect dimensions and setup if you ask me. Just the right WB to compliment the long hood. With a paint job I think it would look so much better. 2 stacks, maybe a chrome bumper, fenders and right on the road
Nice good luck man. I'll enjoy seeing how this goes. We've got two, one around a 74 with a six speed the other is a 71 I believe, with a 5 speed. The 71 has a stuck rack in the fuel pump. Its stuck open. The last time we tried starting it, it wanted to fly wide open and Dad had to choke the air intake to stall it. so keep that in mind. Don't want her to run away
Thank you! That's awesome, we were prepared just in case and we have learned about of what we can do to check and free up the rack so we will be doing that here soon! I appreciate you watching!
I worked outta Kitchells yard, Pioneer Trucking on Parsippany road in Whippany, NJ for a few years. Parsippany road runs between rt 287 and rt 10. That's a pretty good old Mack. I guess I'll get a shirt one day.
When I was in school the teacher had me pick out a good truck for us students to learn on so I picked out a 74 R750st v-8 positive ground and the school still has it to this day! Sweet video new subscriber here now 😂
Ztr pump repair in richland is a good place to go and he isnt too far from you. I have used him a couple times for tractors. He deals with tractor diesel pumps mostly but i wouldnt see why he wouldnt do a truck pump. They are mostly the same if parts can be found or machined. Not super expensive but i guess depends on the pump. If i had a test stand id help you out but i dont. Just an injector pressure tester. Tach is that cable on the front you showed. I second the motion on the dust cover being the threaded hole that someone else said. I can look in my manual to see if I can find a image of that plug. I have 3 old mack manuals and the one shows the 865 v8. The pages for that are well used and apparently who had the manual before had done quite a few of them.
Well know you have the experience after working and stripping down the other R model. Great to see things have got you your own rig Joe. The merch looks sweet
When you had the cap off the back of the governor, did the rack move freely?? It started on fuel, didn't it? That damn pump is expensive. I know where there are some that were rebuilt years ago and never installed, but I'll bet he wants a lot for them.
The basic parts we could see moved freely but I couldn't necessarily see the rack. But I was told to check behind two front caps and I can possibly tap there to free them up so that's my next plan of attack. I appreciate you and that's awesome you know of a hidden gem like that!
I think that hole in the pump just gets a dust plug in it. A pump part screws in and a plug goes in after it. The tach usually threads into a 90 deg angle drive that is bolted near the front of engine.
@Only4Trucks definitely. Be glad to help brother.. Your R700 has a great look. I noticed it has mack western tanks but the rest of it looks like a east coast R700. Looking forward to more videos of it.
When you get the pump back study up on the timing procedure. Some Macks like the E6 350s need to be timed by injector bleed--not just by timing marks.Don't know if that applies to 866 V8s Find an old Mack guy to help
I was wondering where you went Joe. Excellent pick up on the R. I wore your shirt to the Brockway show yesterday and quite a few people asked about it. One guy asked if I was you..
Good to see you back Joe, got to admit, I was getting a little worried about you, I thought maybe you'd done something stupid, like set yourself alight again, sorry mate, I couldn't resist, but again it's good to see you back, are you thinking of painting this black and maybe putting a sleeper on the back, with a big air dam on top, just a thought, keep up tye great work my friend. 🇬🇧
Hello 👋 Mr. Only4trucks i’ve watched your update every day. I still have your subscribe a notification on. I know you tried the best you came with this old, semi with Mack well maybe from next time hopefully doing well greeting happy Sunday looking forward next your update my friend..
I know a guy in Sandown, New Hampshire who he and brother ran Truck Service for decades. One is still the best old Mack mechanic I've known. I don't know if he knows your channel but I'm going to reach out to him and see if I can pass his contact info along to you. There is nothing in an old Mack he can't fix. .
@@Only4Trucks I'll get back to you with his contact. It's probably best to not put his number for all to see. I could email you his info if you'd like to give me that. .
You definitely don't see too many ENDT 865 V9's around anymore If i remember correctly Mack didn't make too many of them......don't quote me on that though
@@Only4Trucks whoops i just now realized i typed "V9" instead of V8....I must've been tired....also is it Turbocharged or N/A? I couldn't see if there was one
That truck brings back memory’s. Drove a R700 Tri axle dump truck in the 80s paving i95 at night. Back when truck drivers were real men Love those old Mack’s
That's awesome! Your right about the drivers. I love the old dogs too!
Oq@@Only4Trucks
Best exhaust note I ever heard from a truck was one of these with a straight through pipe dumping just in front of the rear axle. I was following it up a steep grade through a cut in the hill and the turbo whistle, coupled with the reverberation from the exhaust bouncing of the side of the hill, was truly eargasmic. When we reached a clear stretch of road I pulled out and passed the guy and noticed he was wearing heavy duty earmuffs, LOL.
That's what I hear! I've heard them before at shows but never drove one. I'm super excited! That's great on the ear muffs lol
@@Only4Trucks Love your channel
Love the old Macks!! These were the trucks I was cutting my teeth on when I first started working on trucks for a living in 90. Have seen alot of changes over 30 plus years, still love the old iron! Didnt need a computer. Just basic tools and common sense!
That's awesome! I couldn't agree with you more! Thanks for watching!
Macks and Brockways hold a special spot for me. I got a chance to ride in Superliner powered by a 700 hp 998ci V8. 136k felt like 80k on a regular truck.
That's awesome! I've never been in a high HP Mack like that but one day I hope to!
@Only4Trucks gotta tell you, it's like riding in a locomotive powered by an ALCO or EMD V16 turbodiesel. Same thump, same low resonance sound. Are you going to keep the 865ci V8 or swap in something else with better parts availability? The boat folks still run the marinized E9s, but they are not cheap.
I like the V8s but doing a rebuild on any of the systems is silly expensive unless you have connections.
Mate new viewer love V8 Macks they Ruled the heavy haulage world here in Australia in the 70,s and 80,s they just sound so good
Kym
Adelaide
Thank you for watching! I think the R model was top candidate for construction and heavy haul! I agree they sound amazing. I appreciate you! See you on the next one
How can you not love the sound of a V8 thumping down the road
I wish you sold pocket Ts. It's good to have good people around you. Always try to help them out too.Good video.
I hope to get some pocket t's going soon and absolutely! Thank you!!!
Drove R model Macks Superliners RD and CH Macks in my logging years but I think a clean decked out R model is my favorite. I envy you but then I don't cause you have one hell of a project there. For a 5 speed I bet that sucker has got some torque. Keep doing what you are doing and take it one step at a time. Good luck from an old log hauler...
I appreciate that and I'll do my best! As you said, one step at a time! Thank you old log hauler!
I use to operate a Mack DM. MACK in my opinion is the best trucks out there. Your R700 is gorgeous. You are blessed to have that. By the way, few people know how to operate splits and manuals. I ran lumber trucks and concrete trucks all over the Rockies including the continental divide. I trained drivers as well for the company… lots of turn over. Regardless, have fun.
Thank you! I greatly appreciate that and I will do my best. Thank you for watching!
That reminds me of the day I brought home my old 68 Mack Cabover she was an old mine truck out of GoldField Nv, she started on ether at the old mans house , and that V8 Mack has such a distinct sound, quadraplex trans, twin stick, single axle rear end, loud azz wig wag indicator, ceramic clutch, no power anything, it was fun to learn how to drive truck on that (a few years ago) . I did have to get the massive remy starter rebuilt but she ran strong, shouldnt have sold that one.
Wow that's awesome I would love to drive a truck like that!
I've always loved the old Mack R trucks myself! CAn't wait to see you get that old girl restored!
Thank you! I greatly appreciate that!
Great to see an Ole Timer getn some love
Both Mack’s are absolutely gorgeous
Thank you!
@AreaDieselService gets a lot of love from other UA-cam channels. Diesel Creek has used them a couple times and Clint over at C&C Equipment uses them for his business regularly. Price is one of the downsides to playing with the big toys, even the cheap repairs ain't very cheap.
Thank you for that I'll definitely check them out! And I hear ya on the price but it's one of those things lol gotta pay to play
great to see the old R700, I do be leave that there is only 20 or so of those left in Australia. A good friend of mine has one in mint condition. 👌
Thank you! Wow only 20 that's sad. That's awesome to hear about your friends. Thank you for watching!
@@Only4Trucks Their were not a lot of the R700 that came to Australia, A hell of a lot of R 600 and of course the Value liner V8 .
I'm very happy and excited for you and your new project. I know this is going to bring a lot of new viewers to your channel. Can't wait to see it finished and cruising down the highway!
I appreciate that and I hope it does. I can't wait either!
What's up trucker Joe, I am liking the Mack truck. There's nothing like an older Mack truck. Can't wait to see the finished product, so take your time and do it right. Stay safe out there my friend and keep the videos coming, catch you on the next one.
Thank you! I agree there's nothing like them! And I definitely will be doing it right. I want to be able to enjoy it when it goes out. I'll do my best, you do the same and stay safe, see ya on the next one mark
I have a '75 R700 equipped identical to yours. I went through your thread for some fuel system pointers. Mine ran perfect and then suddenly one day wouldn't pull fuel. Was hoping you'd have found your smoking gun. Love the Gold Dogs! That blue one is a real beauty with that vintage lowbed. Actually everything you folks have going on is pretty sweet!
Sweet man! I will definitely get it going here soon and I'll try to teach you all I can! Yea man Tony's truck is beautiful! I really appreciate that! Thank you for watching!
Small fuel pump on side of eng block.old cloth covered hoses.change all suction side hoses.there is a hose behind injection pump.you can't get off.get a new hose zip tie to old hose.those hoses suck air.you will see the fuel filters low on fuel
That's where I'm at right now. All new lines made up this week. Noticed some were weeping going over to the filter. Figured they were all bad. Thanks much!
I drove R model Macks for three years. Then Matlack replaced them with CH models. Rough riding and hard steering, but very reliable.
I agree with you! Not for the weak but very reliable!
Now that’s funny. I ran out of that yard driving for Cunningham up until May.. I know all the guys. Hopefully you got a tour of some of the stuff that was there. It’s a Goldmine..
Luckily I did. It is a sight to see
Awesome !!! Congrats on getting ur first project !! Excited to watch ur journey. It’s wonderful to have good people around you !!
Thank you! I'm just as excited as you are. It is absolutely wonderful
Single stack Mack with a window in the back and a barking pipe , life doesnt get any better 👍
Nice truck man! Reedy Diesel Service up here in Lebanon PA. could probably help you out with the pump. The owner worked on Mack pumps forever!
Thank you! Good to know for sure! Real local!
Back in 06 I worked for Stettler county, they had the twin to that truck, it was a 72 super clean. They hauled equipment with it. I had never seen a 700 before especially with a v8. Just found your channel 👍
Wow that's awesome, thank you for watching and I hope to keep you watching!
Tom Ameducchi's looked good there. I bought his single axle R model about 6 years ago
Oh wow that's awesome! It is a beautiful truck
my dad was in the North Jersey chapter of the ATCA and as a kid we would go to the Amaducci brothers garage and have a meet. this was back in the early 80s, but the big meet was always in macungie pa
Looks like the threaded hole is for the hand primer on your lift pump.
That’s a very cool truck. The perfect dimensions and setup if you ask me. Just the right WB to compliment the long hood. With a paint job I think it would look so much better. 2 stacks, maybe a chrome bumper, fenders and right on the road
Thank you! I appreciate that and it will definitely have a great look in the end!
Drove many Mack's back in the 80s.
I looooooove those old R models
You and I both!!!!
Check Area Diesel for the fuel pump
Love the truck best wishes and for a great build you have great family and friends by your side you are already half way there❤always grateful😊
Thank you I Greatly appreciate that and I couldn't agree more!
Good old mack
Yes sir!
The best truck Mack ever built R600
I would say the R Series is my favorite
Nice good luck man. I'll enjoy seeing how this goes. We've got two, one around a 74 with a six speed the other is a 71 I believe, with a 5 speed. The 71 has a stuck rack in the fuel pump. Its stuck open. The last time we tried starting it, it wanted to fly wide open and Dad had to choke the air intake to stall it. so keep that in mind. Don't want her to run away
Thank you! That's awesome, we were prepared just in case and we have learned about of what we can do to check and free up the rack so we will be doing that here soon! I appreciate you watching!
Area diesel service out of Indianapolis, Indiana or pro-formance fuel injection out of clearfield, PA might be able too rebuild that pump
Thank you!
No way Joe that’s literally 5 min from my house. That’s mountain lakes right? I would’ve came said wats up
It was somewhere near there lol
Your mack spoke to me, she said I sat to long and I want to ruuuun😊,I'll catch ya on the next one
That's awesome! I hope to get it running soon!!! See ya on the next one
@@Only4Trucks 10-4 brotha friend will see ya
I worked outta Kitchells yard, Pioneer Trucking on Parsippany road in Whippany, NJ for a few years. Parsippany road runs between rt 287 and rt 10. That's a pretty good old Mack. I guess I'll get a shirt one day.
Sweet; and thank you! I appreciate that
When I was in school the teacher had me pick out a good truck for us students to learn on so I picked out a 74 R750st v-8 positive ground and the school still has it to this day! Sweet video new subscriber here now 😂
Area diesel will rebuild the pump I think
Wow that's awesome! Super cool to hear they still have it! And thank you for subscribing!
Ztr pump repair in richland is a good place to go and he isnt too far from you. I have used him a couple times for tractors. He deals with tractor diesel pumps mostly but i wouldnt see why he wouldnt do a truck pump. They are mostly the same if parts can be found or machined. Not super expensive but i guess depends on the pump. If i had a test stand id help you out but i dont. Just an injector pressure tester. Tach is that cable on the front you showed. I second the motion on the dust cover being the threaded hole that someone else said. I can look in my manual to see if I can find a image of that plug. I have 3 old mack manuals and the one shows the 865 v8. The pages for that are well used and apparently who had the manual before had done quite a few of them.
Wow thank you! I'll definitely have them in mind and I also greatly appreciate the looking through the manuals that help could be huge!
Good morning from Cape Cod ⛵ congrats on finding the r700, this should keep you out of trouble 😉 ✌️🇺🇲
Thank you! I hope it does hahaha
good luck, nice truck greetings from Norway
Well know you have the experience after working and stripping down the other R model. Great to see things have got you your own rig Joe. The merch looks sweet
Thank you! I have learned a lot about them for sure I'm excited to use that knowledge and put together a sweet ride!
Joe i would love to see that truck with a dump trailer hualing demo with yuor name on the door God bless you brother 😊
Absolutely! I appreciate that and God bless you too mark!
Endt's ate a lost art even the e9's are getting hard to find anybody that can work on them
Absolutely! Hopefully I can keep this one barking once I get it going again!
Wow! The opening is top notch! Great job!!!! Sub’ed
Thank you! I really appreciate that!
the renault v8 is a beast
That's not a Renault the E9 was
When you had the cap off the back of the governor, did the rack move freely?? It started on fuel, didn't it? That damn pump is expensive. I know where there are some that were rebuilt years ago and never installed, but I'll bet he wants a lot for them.
The basic parts we could see moved freely but I couldn't necessarily see the rack. But I was told to check behind two front caps and I can possibly tap there to free them up so that's my next plan of attack. I appreciate you and that's awesome you know of a hidden gem like that!
I'm not trying to be a smart ass , but I'm sure you know Mack that year are positive ground hope that is helpful
Yes lol, that's definitely the root of our problem, but we're learning and we will figure it out!
@@Only4Trucks kenworths up in the 80's were positive ground to
Area diesel service will rebuild your lift pump.
That's been the common word, thank you!
Think I saw that on marketplace for sale
it should Start right up once you put fresh fuel in her
Absolutely!!!!
I think that hole in the pump just gets a dust plug in it. A pump part screws in and a plug goes in after it. The tach usually threads into a 90 deg angle drive that is bolted near the front of engine.
Thank you! I appreciate it and I'll be looking more on your channel and talking to you to learn r700 stuff and find parts maybe hahaha
@Only4Trucks definitely. Be glad to help brother.. Your R700 has a great look. I noticed it has mack western tanks but the rest of it looks like a east coast R700.
Looking forward to more videos of it.
She's a good looking old girl.
Thank you!
Looks like a Canadian Mack if i had to guess! I just sold a hood for an R-700 that i was going to use on my 67 RL 700L.
I'm not 100% sure honestly, definitely something east coast is all I know. Luckily I have a hood I plan to use
those old macks were positive ground , that may be why a no start
Had my lift pump rebuilt at Batteries and Electric in Somerville NJ
Thank you! I'll keep that in mind
When you get the pump back study up on the timing procedure. Some Macks like the E6 350s need to be timed by injector bleed--not just by timing marks.Don't know if that applies to 866 V8s Find an old Mack guy to help
I appreciate that bit of knowledge I'll definitely be trying to learn all I can from the old timers that know!
I have the same 5th wheel on my 73 r model
I’ll be at the buck next weekend
Sweet! Excited to meet you, hope you find me!
@@Only4Trucks me and my 2 buddies will be looking for you
You have to free up the pump on top of the engine, remove the to cover and work that value loose then it will get fuel.
I'm going to try again next week. Thank you!
Hello joe I was starting to get joe withdrawals good to see you back hope everything is alright as always excellent video thank you ken
Hey ken! Sorry for the lack of posting but I'm excited to try and keep at it now! I appreciate that and excited to bring you another video here soon!
im so pumped for you bro! you deserve it
Thank you! I greatly appreciate that!
Make sure the fuel shut off is in,,, good luck
Thank you!
Black Duck~~
Absolutely
Garden state diesel for the injection pump if needed
My dad took one there a couple years ago, was great work. I've considered them
Everyone has a dream, but running a Mack V8 sounds like a nightmare to me!
Glad to see you got your dream truck though.
Hahahah thank you I appreciate that!
I love it, lots of work ahead good luck👍
Thank you! And it absolutely is but we will do our best to get it done!
I was wondering where you went Joe. Excellent pick up on the R. I wore your shirt to the Brockway show yesterday and quite a few people asked about it. One guy asked if I was you..
Thank you! And wow that's crazy! Feels surreal. Hope to see you at the buck or lititz!
Cool ole truck
Thank you!
Im guessing it is feul pressure gauge mate im not sure but I look at where you were so im thinking it’s it
Area Diesel service is good from what I've heard.
I appreciate that! I'll have them in mind for sure
Try area diesel they do colabs with diesel creak and scrappy industries might do one with you
Alot of people have said that! Might have to reach out!
Good to see you back Joe, got to admit, I was getting a little worried about you, I thought maybe you'd done something stupid, like set yourself alight again, sorry mate, I couldn't resist, but again it's good to see you back, are you thinking of painting this black and maybe putting a sleeper on the back, with a big air dam on top, just a thought, keep up tye great work my friend. 🇬🇧
Hahaha that's great, thank you and your absolutely right with your guess! I'll do my best!
Give it new life
I most certainly will!
Saw a complete running Mack here in VA. on marketplace for 2,000. No title, parts truck it said.
Wow that sounds like a good deal!
I think you should have more ads in your videos, as so you will get more revenue for your time and hard work and entertaining us. 👌🏻👍🏻
Sadly I don't choose lol but I also don't want to vote you guys either.
Hello 👋 Mr. Only4trucks i’ve watched your update every day. I still have your subscribe a notification on. I know you tried the best you came with this old, semi with Mack well maybe from next time hopefully doing well greeting happy Sunday looking forward next your update my friend..
Thank you! I appreciate that and we did and we will get it going eventually! Thank you
@@Only4Trucksyou’re welcome 🙂
Area Diesel Service. best around.
Thank you! That's maybe 5-10 comments that said that so it must be!
I know a guy in Sandown, New Hampshire who he and brother ran Truck Service for decades. One is still the best old Mack mechanic I've known. I don't know if he knows your channel but I'm going to reach out to him and see if I can pass his contact info along to you. There is nothing in an old Mack he can't fix. .
That's awesome, I would appreciate that and it would be awesome if I could learn a thing or 2 from him. Thank you very much!
@@Only4Trucks I'll get back to you with his contact. It's probably best to not put his number for all to see. I could email you his info if you'd like to give me that. .
You should have put fresh spark plugs in ....
Why didn't I think of that?
If you have a mack you may have a positive ground system
Most Macks up to 75/76 were positive ground
Yes that's what I figured as well just couldn't figure it out on the fly so we bypassed it lol
6 minutes in, and I'm wondering if that is a 375?
Great truck u got there brutha !
I appreciate that! Thank you, it is an 875 stamped 325hp lol but it will do!
I got a 74 RL700L I’m going to do up. It has the 6speed and same motor
That's awesome! Best of luck with it! Hope to see it one day!
Master switch? just sayin
I know exactly where this is
You definitely don't see too many ENDT 865 V9's around anymore If i remember correctly Mack didn't make too many of them......don't quote me on that though
I agree definitely a little rare! I hope to learn alot more about them in the near future!
@@Only4Trucks whoops i just now realized i typed "V9" instead of V8....I must've been tired....also is it Turbocharged or N/A? I couldn't see if there was one
Fuel transfer pump???working
Id be funny to shorten the frame as short as possible and turn it into a drag truck
That would be sweet!
I no those guts where live up north jersey neat rt 80 they have nice r 686sx trcktor
Oh wow that's awesome
Why did Mack build an R700 long bonnet? So you could fit a bigger engine I guess like a V12 Detroit.
I don't know if any came factory with a v12. But it was to compete with other road tractors of the day and fit bigger engines
@@Only4Trucks Cheers I was being a smart arse. I'll have to watch the trip through Philly again.
Cool man
Thank you!
I have a 1973 R700 also with a V8. I dragged it out of a field. Got it running good. Let me know if I can help with any info. 👍
Wow that's awesome! I will definitely if I have some questions!!! Hope to meet you one day!
Call area diesel service they will help with your pump Jim Swanson Oregon Ohio
@@jamesswanson2312 thank you!
That ted Mack pulling the rebar is that a re-steel truck ??
No it is not but it may one day lol
All States truck parts
Let me guess the color...black? :D
Someone's got the right idea!
I just know of them o don't no them personaly
They are great people
Where did you find that beautiful truck
North jersey
What happened to the videos? Did I miss something?