I so appreciate the thoroughness and thought that you put into the builds and explanations. The more I watch your channel, the more I'm thinking of just sourcing everything through AVC Rig for my ordered 2023 transit! Thanks!
Beautiful van build. Love the clean and straightforward approach of this one. One side note, and I don't mean to sound rude at all, but I run a video production company and wanted to give a friendly bit of feedback. I watch all of your videos and notice the audio is clipping on the vast majority of them. I would suggest to your video guy to turn down the gain / volume in camera to prevent this. It makes it have a slightly distorted sound when you speak at slightly higher volumes. Again, not trying to be rude, and I only mention it because I love watching your build videos. Thanks for sharing.
We’ll take all the input we can get. I appreciate it. I think I get loud at times and forget I have a mic on my shirt. Lots of years in a shop around machinery probably doesn’t help either. Thanks for the suggestion.
hi thank you this is great planning to buy a transit but I wanted to see if I can call you so you can guide me with a few questions that I have. Thank you for doing this!
We’re working on them. They aren’t quite ready for DIY yet. We thought it was good to go, then installed it in a MR and we had to make some adjustments.
I don't see the bed listed in your store... is it only available as part of a build? Or no longer available? This seems like the perfect solution. Been trying to find a platform for a regular queen size mattress.
Love all your videos very informative, we are getting ready to build our 2022 Transit out and trying to figure out charging system. We are not going to build off the grid type more of a overnight or two moto / mtb van. I have purchased a/c unit that will run off our Honda generator, we also will have 200watts of solar. The other components will be12v maxx air fan a dometic ice chest some led lights and a few usb ports. The gold zero unit is what we are thinking about getting have you been happy with yours and I'm sure theirs away to keep unit topped off thru these sources correct ? we are very beginner when it comes to electrical. Thank you in advance
With the generator to run the AC I think the GZ3000 would be perfect. I use mine in my family camper to run lights, fan, heater, fridge, and electric kettle. Most trips are 3 nights and we’ve always had power. Add the yeti link and connect to your alternator. You should be just fine.
Hey guys. I'd love to follow your lead and put the Falken Wildpeak 245/75/R16 120/116s E tires on my stock AWD Transit 250, but I wanted to ask if you had consistently found that there isn't any rubbing up front (with liners). I'm reading a lot of conflicting opinions/experiences in the forums. Thanks.
Got my answer. The Falken Wildpeak 245/75/R16's did NOT fit on my T-250 Transit without the need to trim the pinch weld and completely eliminate part of the wheel well liner. Hope that helps someone else avoid making the mistake of thinking they do.
Thanks for the video. I have a 2019 148 medium. Curios on the wheel change how you are handling calibrating the speedometer? Sounds like some folks have been able to do it, but wind up with a fault from the ABS system that sets the lght.. Appreciate it.
I haven’t ever adjusted my Speedo. My understanding is it can be done in Forescan, but I have yet to pick it up. It’s off by %10 so it’s easy math to do. I tend to just stick with the speed limit and I get by ok.
Nice van! did u install the 8 inch display screen or order it with van? Know anybody that does upgrad from 4 inch without sync? good call on heater, on ours there was a T in gas line to hook up so no need to drop tanks on these vans. Never had problem yet. Ours mounted in garage space wish it was under seat like urs.
Hello AVC, love your setups! One question, I have a 2021 transit, dual battery setup and using Yeti 3000X also. The yeti link was charging the yeti upwards of 700W for a few day and now almost nothing. Do you have the same issue ? If so, how did your get around it?
what was battery at when you noticed? My older unit would sometimes drop to 96% before it started charging (yeti 1400). Havent had issue on newer 1500x.
I have had good success with the link. I’d check your ground connection first. I find most electrical problems come from a bad ground. How did you connect to your CCP on your drivers base? The small stud or the larger? Definitely need to be on the larger as it’s rated to a higher amperage. Grab your volt meter and check voltage at all your connections with the vehicle running. If voltage is being supplied to the link module I’d check your app and make sure it’s still in vehicle mode. Hope this helps!
@@AVCRIG thanks for the fast answer! I tried smaller stud and straight to the battery afterwards (as GZ suggest). I’ll check ground, voltage an try bigger stud. Always on car mode. Thanks again! Keep up the good work 👌
@@JeffTScott hey Jeff! Doesn’t seems to matter the pourcentage…I eat the transit 2021 might have a « smart » alternator that lower voltage after the truck battery is fully charge and the yeti thinks that the car is not running since the voltage is lower than around 13V…I’ll keep investigating.
The new tire fits tight against the rear axle. If you deflate the tire it can wedge in there, but it’s still a pain and then what’s the point of a spare! Haha. Hope this helps.
@@AVCRIG awesome thanks! I’ve been going back and forth to make an east/west bed vs north/south. Now leaning towards your layout. Im 5’10” so e/s would be tight since I’m not planning on flares
Was planning a similar build on a 250 using mainly your kits. What is the weight of this build with or without water? Doubting my plans 🤔 Would you recommend only a 350?
Do u mind sharing how much is this build? I like d fact that it can seat 4. It can also sleep 2 more under d bed, just need an inflatable mattress for that n now it can sleep 4
Correct on the size. No issues with TPMS. Speedo is off by %10 so it’s pretty easy to calculate. I typically just match the speed limit with my dash and that puts me just right with traffic.
The bed panels and mattress slide out and could be secured to the walls or stored at home. That’s a good thought though. Maybe plan that into our panel system.
@AVC RIG do you think a Bellagio foldaway seat would work with this Layout? Ive see one on youtube but it didn't look very secure. Agreed this is the most family friendly layout there is. Great work.
I’d use a game changer 3.0. It’s shallower than your wheel well. You can also check out DCS (deep cycle systems) their battery looks thin but I have not used them.
I love that hanging soft bag storage. First time I’ve seen that
I so appreciate the thoroughness and thought that you put into the builds and explanations. The more I watch your channel, the more I'm thinking of just sourcing everything through AVC Rig for my ordered 2023 transit! Thanks!
That’s really wonderful to hear. Thank you. Hopefully we’ll have lots more cool stuff once your van is here.
Van looks great. Bed system is very innovative. Thanks for the ideas and products you're making available.
Thanks Travis!
That is a very nice van with simple systems. That would be a very simple van to keep in peak shape all the time.
That’s the idea. Keep it simple and functional.
Another great vid! Would love to see how you packed the garage for the trade show. As a Transit owner, I appreciate all your content. Thanks
That is a fun idea! I’ll put it in the back. Not sure we got pics, but I will next time.
sick build!
Beautiful van build. Love the clean and straightforward approach of this one. One side note, and I don't mean to sound rude at all, but I run a video production company and wanted to give a friendly bit of feedback. I watch all of your videos and notice the audio is clipping on the vast majority of them. I would suggest to your video guy to turn down the gain / volume in camera to prevent this. It makes it have a slightly distorted sound when you speak at slightly higher volumes. Again, not trying to be rude, and I only mention it because I love watching your build videos. Thanks for sharing.
We’ll take all the input we can get. I appreciate it. I think I get loud at times and forget I have a mic on my shirt. Lots of years in a shop around machinery probably doesn’t help either. Thanks for the suggestion.
hi thank you this is great planning to buy a transit but I wanted to see if I can call you so you can guide me with a few questions that I have. Thank you for doing this!
Would love to see an episode or diy kit for the adjustable beds.
We’re working on them. They aren’t quite ready for DIY yet. We thought it was good to go, then installed it in a MR and we had to make some adjustments.
I don't see the bed listed in your store... is it only available as part of a build? Or no longer available? This seems like the perfect solution. Been trying to find a platform for a regular queen size mattress.
Looks great! I don't see that bed system on your website. Where can I learn more?
Coming soon!
Love all your videos very informative, we are getting ready to build our 2022 Transit out and trying to figure out charging system. We are not going to build off the grid type more of a overnight or two moto / mtb van. I have purchased a/c unit that will run off our Honda generator, we also will have 200watts of solar. The other components will be12v maxx air fan a dometic ice chest some led lights and a few usb ports. The gold zero unit is what we are thinking about getting have you been happy with yours and I'm sure theirs away to keep unit topped off thru these sources correct ? we are very beginner when it comes to electrical. Thank you in advance
With the generator to run the AC I think the GZ3000 would be perfect. I use mine in my family camper to run lights, fan, heater, fridge, and electric kettle. Most trips are 3 nights and we’ve always had power. Add the yeti link and connect to your alternator. You should be just fine.
I thought you retired the lab coat for summer, but there it is on the passenger seat. Unbelievably funny.
I’d wear it all the time if I could, it just gets so hot! Haha definitely it’s always nearby
@@AVCRIG I know, so funny.
Great video. Great work inside. Suscribed
Thank you very much!
Awesome.
Thanks Chad.
Is the base van the crew model with the side curtain air bags? I may have missed you saying so… nicely done!
Base was a cargo van.
Hey guys. I'd love to follow your lead and put the Falken Wildpeak 245/75/R16 120/116s E tires on my stock AWD Transit 250, but I wanted to ask if you had consistently found that there isn't any rubbing up front (with liners). I'm reading a lot of conflicting opinions/experiences in the forums. Thanks.
Got my answer. The Falken Wildpeak 245/75/R16's did NOT fit on my T-250 Transit without the need to trim the pinch weld and completely eliminate part of the wheel well liner. Hope that helps someone else avoid making the mistake of thinking they do.
Thanks for the video. I have a 2019 148 medium. Curios on the wheel change how you are handling calibrating the speedometer? Sounds like some folks have been able to do it, but wind up with a fault from the ABS system that sets the lght.. Appreciate it.
I haven’t ever adjusted my Speedo. My understanding is it can be done in Forescan, but I have yet to pick it up. It’s off by %10 so it’s easy math to do. I tend to just stick with the speed limit and I get by ok.
Nice van! did u install the 8 inch display screen or order it with van? Know anybody that does upgrad from 4 inch without sync? good call on heater, on ours there was a T in gas line to hook up so no need to drop tanks on these vans. Never had problem yet. Ours mounted in garage space wish it was under seat like urs.
This came from factory. There are aftermarket upgrades out there, but I’ve never messed with them.
that gas line t is very good info for those considering diy…i wonder why he ignored that bit
Hello AVC, love your setups! One question, I have a 2021 transit, dual battery setup and using Yeti 3000X also. The yeti link was charging the yeti upwards of 700W for a few day and now almost nothing. Do you have the same issue ? If so, how did your get around it?
what was battery at when you noticed? My older unit would sometimes drop to 96% before it started charging (yeti 1400). Havent had issue on newer 1500x.
I have had good success with the link. I’d check your ground connection first. I find most electrical problems come from a bad ground. How did you connect to your CCP on your drivers base? The small stud or the larger? Definitely need to be on the larger as it’s rated to a higher amperage. Grab your volt meter and check voltage at all your connections with the vehicle running. If voltage is being supplied to the link module I’d check your app and make sure it’s still in vehicle mode. Hope this helps!
@@AVCRIG thanks for the fast answer! I tried smaller stud and straight to the battery afterwards (as GZ suggest). I’ll check ground, voltage an try bigger stud. Always on car mode. Thanks again! Keep up the good work 👌
@@JeffTScott hey Jeff! Doesn’t seems to matter the pourcentage…I eat the transit 2021 might have a « smart » alternator that lower voltage after the truck battery is fully charge and the yeti thinks that the car is not running since the voltage is lower than around 13V…I’ll keep investigating.
Can we buy the bed system on your website?? I can't seem to find it.
please tell me this van bed system is coming for sale?!
Yes! We’re filming overview and assembly next week!
I was curious if it was going to be released into the wild!
@@AVCRIG Bless you
With the larger tires, the spare no longer fits underneath the vehicle. What was the clearance issue with the factory spare mounting system? Thanks!
The new tire fits tight against the rear axle. If you deflate the tire it can wedge in there, but it’s still a pain and then what’s the point of a spare! Haha. Hope this helps.
Can you tell me how many inches from the end of the bed to the back of the driver seat? Thanks
Front of the bed panel to the back of drivers seat is 53” the bed is 80” but could be made shorter easily if needed. (Or longer if you’re tall)
@@AVCRIG awesome thanks! I’ve been going back and forth to make an east/west bed vs north/south. Now leaning towards your layout. Im 5’10” so e/s would be tight since I’m not planning on flares
Was planning a similar build on a 250 using mainly your kits. What is the weight of this build with or without water? Doubting my plans 🤔 Would you recommend only a 350?
Weight is about 1200 lbs. Including seats. A 250 would be totally fine. I order the 350 so that new owners can tow or carry heavy gear.
@@AVCRIG awesome info to have, thanks!! All we tow is a 16ft raft and frame on a tiny trailer.
Do u mind sharing how much is this build? I like d fact that it can seat 4. It can also sleep 2 more under d bed, just need an inflatable mattress for that n now it can sleep 4
The bed system can support multiple bed platforms. If you email the shop we will get you build pricing. Shop@avcrig.com
Falcon wild peak AT3W 245/75/16, is that correct? Any issues with TPMS? How’s the speedometer and odometer? Tnx!!
Correct on the size. No issues with TPMS. Speedo is off by %10 so it’s pretty easy to calculate. I typically just match the speed limit with my dash and that puts me just right with traffic.
Which solar panels are those on this build?
Renogy 100w panels. They measure just under 42x21
Can you store away the adjustable height for when using as a work van?
The bed panels and mattress slide out and could be secured to the walls or stored at home. That’s a good thought though. Maybe plan that into our panel system.
@AVC RIG do you think a Bellagio foldaway seat would work with this Layout? Ive see one on youtube but it didn't look very secure. Agreed this is the most family friendly layout there is. Great work.
It might, but you’d have to center it between the utility cabinets. The bed system can support another bed platform if you wanted 2 beds.
@@AVCRIG in b/w utilities would ruin garage. hmmm. just not enough bracing and support in front of pass. utility box?
@@JeffTScott I don’t think I understand.
Wait where is the lab coat ??
It's on the back of the passenger seat. HAHA
Glad you like it! We were trying to keep this one more casual.
Good eye!
@@AVCRIG I study everything! 😉
where is your hand brake ? my 350 2022 still has it in between the passengers seats ( EU) very annoying with the swivel seats
E brake delete has been an option here since 2020. I think all the 2022 I have seen are push button now.
JNZ Seat ? Google not puling up?
JMG seating out of California
What is the cost of this "gear hauler" build minus the two 18" passenger seats and mounts?
Eco boost system is crap..you just purchased a NigthMare dude..get the checkbook and Electro mechanic ready omg..
I’ve never had a problem with any of mine.
I’m looking to build the power system as flat and vertical to the wall. Any good options for a flat battery or stack?
I’d use a game changer 3.0. It’s shallower than your wheel well. You can also check out DCS (deep cycle systems) their battery looks thin but I have not used them.