I had the TRP Operator and was going broke shooting it. Picked up a Loaded Target in 9mm, upgraded the magwell and sight as you did, had the top cerakoted black, and did some Typhon Vz grips. Finished it off with some Wilson Combat 10rd mags and a Blackhawk Serpa holster. Liked it so much that I sold the TRP.
45ACP is indeed twice the cost of 9mm. Those TRP’s are nice, but in the end, it comes down to what you actually shoot. I’ve got some wilson combat 10 round mags too. Very nice.
I have run a two piece guide rod for nearly 30 yrs now and never had a problem with loosening. A dab of never seize on the threads or even heavy grease will add just enough friction to keep it from loosening.
Time to get a holster for those range sessions, if you haven’t already. I like my SA 1911 in 9mm as well. It is very accurate from the box. I prefer the stock front sight though. Like the grips you installed. Good shooting on that small plate.
Their dimension options are endless. I got my dimensions by talking to another guy on calguns.net. Sights alone annoy me. All of the different cuts. Sizes. Etc.
Did you have any issues putting on that Dawson precision sight? I like the sight you put on your SA 1911 and I am thinking of putting one of those on mine. Those black on black sights don’t do it for me.
@@GatCat just got my 1911 .it is absolutely beautiful girl. I did change the rod system and I also did my slide flat sides mirrow polish myself and it looks amazing. It shoots great for a .45 not to much recoil and I can def see why choosing a 9mm will be almost not recoil at all once again great pistol and great grios u got there my friend 👍
The only thing I dont care about with that gun is the guide rod. Its not a big deal but its not needed and makes break down more complicated in my opinoin for no reason. A lot of people say that guide rod does all these wonderful things but In my experience it dont do nothing but get in my way when taking the gun apart.
Getting ready to buy a 9mm target 1911 and came across your review. This is a great video of your Springfield Loaded 9mm! Where did you purchase your front sight and Ed Brown two piece magwell? How is she shooting? Thanks!!
Front sight is From the Dawson precision website. The magwell is from Ed Brown’s website. I recently ran into bad malfunctions, with the firearm locking up. Chamber was too tight. I contacted Springfield and they recommended I use only two types of ammo. That is not an option, so I had a gunsmith use a chamber reamer and now back business. The gun runs great. I like it a lot.
@@GatCat Well deserved! I have been interested in the exact same 1911 in 9mm and was fortunate to have found your review. I contacted Springfield Armory and they guided me to a dealer who has that same model in stock. Planning to place my order next week. Also reviewed the Clark Custom gunsmithing services....good stuff, sky's the limit! I think I do the 25LPI, G10 grips and the two piece magwell. Would be great to see any accuracy shooting sessions with your SA 9mm. I'm subscribed.....Thanks!
@@jamesbronson1448 the wrap around hogue is a lot more popular indeed. These Pachmayr grips are the grips that come with the MC Operator. If you are looking for some kind of texture on the front strap they are great. Very comfortable. They are a bit thick though. Thicker than a standard 1911 grip.
How long have you been looking? What websites do you frequent? This one I picked up from Sportsmans warehouse by purchasing online and picking up in the store. However, I see them on the used market every week. It shouldn’t be Harding finding one.
@@GatCat I just looked online and seen the sportsmanoutdoor warehouse! I’m thinking of an1911 ronin. I purchased yesterday a berreta sky storm but I’m thinking of canceling that one and buying a 1911 and having it shipped to my local dealer. Thoughts on that?!
@@bennyduran6960 the ronin is not on the roster. I would suggest taking a step back and figuring out what you want by holding a few guns. Shoot them. Then, after you know what you want seek it out. Different people will have different opinions of what gun to get. I have a video titled top 5 tips for the new gun owner, you should check that out.
Happy to have found your channel while browsing my “extended” CA options for a good 1911 in 9mm (LOL); my FFL thinks this is not in the CA DOJ roster but I saw this gun in it just today. Will probably need a new FFL. Now, how would you compare this gun versus the Kimber Target stainless II?, tightness of both guns? Reliability? Parts and customer service comparison? . My other 1911 is. 40mm Para USA P-1640 I brought with me when I moved here years ago and I am looking for an aftermarket mag well, do you know where can I get one for that double stack gun?. Stay safe and thanks for the info!
Thanks man! I guarantee I can find you one under $1000 if you don’t mind subscribing and sharing my channel as much as possible. Anyway, I’m really trying to gear my channel towards educated CA gun owners. Not in a legal sense but basically the issue that you are running into. In CA, there is a Roster. So it all comes down to the part # This is P19134LCA. I believe Springfield also makes a version that has Novak sights on it, which makes it off roster. The Kimber is even trickier to get because in the two years of looking for one I have never found for sale. Even before this gun craze. Also, if you ever find a Kimber Stainless Target II there is VERY high probability that its off roster as they make thousands of those for the the free statutes. The finish is not as good, and it comes with a plastic Main Spring Housing. In. Addiction, there is no memory bump on the grip safety, so you’d be more much more likely not fail to fire the gun under stressful situations. There is a very large following for Kimber , they are beautiful guns. But ever since there Quality control issues, I won’t ever buy one, as their Customer service isn’t great either. Lastly. If there was a big demand for them in CA them we would see at least as many as the springers. I could be completely wrong on Kimber but I’ve owned over 4 Springfields and not one of them has malfunctioned one time. Even after 10K total rounds. Let me know you if you have any other questions. Thanks for reaching out. If you want to talk more on phone more about this let me know,
@@GatCat just subscribed to your channel and Heck yes, I will call you for advice. Again, super interested if the Springfield can be obtained at less than $1K , let me know !
Beautiful 1911, I’m looking to do exactly what you had performed on my Loaded Target. Can you give me a ball park what to expect to have the mods completed labor wise. Thank you for a great video! Skt
@@GatCat I’m sorry for your mods the cutting of front strap the undercut trigger and polishing of dulled areas what can I expect to pay for the custom work. Skt
@@sktt6188 it really depends on what company you go with and how they do the front strap checkering. There are three different ways. By hand, mechanical machining and automated machining. That said, mine was $140 for 25LPI, then $50 for magwell blend, $50 undercut trigger guard, refinishing $50. Shipping was about $50. The entire thing came to around $400 if I remember correctly. Most places charge $250-$350 for front strap checkering and have a very long turn around time. Clark customs had amazing prices and quoted me a 30-90 turn around. They had it back to me in 3 weeks. When I did get it back, I noticed that they had scratched the snot out of the gun. I didn’t mention this in the review because they made everything right by refinishing the gun again. The only issue was having to wait another 2 weeks to get it back again. I would recommend skipping the blending of the magwell unless its done very very well with a corresponding magwell. Mine just looks ok, not worth extra money as it does nothing different than a standard magwell. Sorry for the long response, I hope this helps. Lmk if you have any other questions.
@@neiljvoice1603 there is a dry fire system that I use at home that has helped me a lot with accuracy. You could potentially get an air soft gun that is a replica of a favorite firearm and do the same. I hope all is well across the pond. I love the Beatles, Rolling Stones, LED Zepellein, The Who, Pink Floyd etc...
2 weeks. They told me it would take 30-90 days, but it just took 3 weeks from sending it off to getting it back. I did however send it off before all the panic buying. Logan Clark is the only person that does the checkering, so if he is backed up, it could take a while. I suggest going with 20 LPI, I did 25LPI and its just not sharp enough for me.
That's pretty remarkable. I've got an MC Operator just like yours and I just can't stand the smooth front strap. Thanks for getting back to me, I'm gonna give them a call and tell them you sent me.
@@KatoCoyoteCombatWorkshop they won’t be able to refinish your MCO. they have to send it to a third party. If you want front strap checkering on the MCO, you should consider sending it to Springfield. They are the only ones that will match the frame. Otherwise it’s going to be completely cerakoted in whatever color you choose.
@@GatCat I figured as much when I found that they only did bluing. Unfortunately Springfield has dropped consumer custom work, but I have a local cerakote pro who might not get it perfect, but good enough for me. Thanks for checking in.
@@KatoCoyoteCombatWorkshop that is such a bummer. Lately my experience with Springfield has been concerning. They were to send me a replacement 2 piece guide rod and sent me the wrong part 3 (not exaggerating) times. I’m now waiting to see if they can send me the correct part or not. Its really confusing.
The plan was to get a PM9, however in CA finding one of these is difficult and expensive. I did however pick up a Dan Wesson Commander Classic. I have a video on that.
This is true. Your best bet is it stay in touch with distributors. Get to know when they receive shipments. Then give them a reason to contact you when they get one in. Just grow a rapport really.
i understand purists wanting to gatekeep the 1911 and saying it 'has' to be 45 ACP as things i collect i believe in purism, too. were i a collector/purist i would tear the 9mm fans up, lol. my first gun will be a SA 1911 garrison 9mm, though, and i don't feel a bit bad about it any more than new corvette owners feel bad about their cars... which i don't consider real vettes, lol.
Honestly at this moment in time I would recommend your first 1911 to be the Springfield Prodigy. 9mm obviously. I have a 4.25” myself with a Holosun 507C. Regarding “purism” what is a 1911? Is it the original John Browning design of 1911? Or is it the 1911 A1, which saw the most military use? Can it have a beaver tail or long trigger? What about sights and grips? Can it be a series 80? The list goes on as every single component has been changed through the years. Personally, my deep appreciation for the handgun is what caused me to mention the sentiment regarding 45ACP. Considering all aspects and potential changes/upgrades to the 1911, 45ACP is simply rooted in its inception and pedigree. So why choose 1911 if not for the connection to the greatest American handgun of all time? Any “purist” touting the sacrilege of 45ACP most likely owns a MSH that is straight. Or upgraded sights or whatever else. So that, forgo the 45ACP and go nuts.
@@GatCat no doubt a purist would say the 1911 starts with the 1911, not the predecessors (which were 38, not 45 i believe) and maybe even claim it has to be a colt design. mostly they would probably say it has to be a 45 ACP. i get it, i say it's not a mustang if it has an electric motor. i'm sure they'd argue the A1 is a true 1911 because of that spirit and direct connection, perhaps even saying some of the changes were because of the military and not necessary improvements over a long history to remain relevant. i get gatekeeping and have no problem with it. if someone says it's not a 'real' 1911, i'm not going to argue with them because i fully understand the passion involved.
@@GatCat oh, i wasn't really taking it as a debate, per se, just conversating. anyway, if i have the time tomorrow i'll run up to the gun shop near me that has the garrison i want. i appreciate the advice on the prodigy, but after all the research and having held the garrison, i have to pull the trigger on a purchase eventually. if they have a prodigy i'll definitely check it out, hold some more handguns while there just to be sure while hoping they don't mention the words 'glock 19' to me. not sure what the paperwork entails exactly, i think the waiting period is 3 or 4 work days.
@@ryanbarker5217 the garrison is a great value I think. I know that some of springfields newer 1911’s used plastic triggers and a lot of MIM parts. However, these differences will most likely not cause the gun to function any worse. If you have never fired a 1911 9mm you are in for a treat. It’s like shooting a BB gun. Very easy.
@@GatCat yea oh that’s where I find it idk why you said but hey man it’s ok you can change your opinion hey man we all love Lebron he’s goated king 🤴 James Danny green 3s!
I had the TRP Operator and was going broke shooting it. Picked up a Loaded Target in 9mm, upgraded the magwell and sight as you did, had the top cerakoted black, and did some Typhon Vz grips. Finished it off with some Wilson Combat 10rd mags and a Blackhawk Serpa holster. Liked it so much that I sold the TRP.
45ACP is indeed twice the cost of 9mm. Those TRP’s are nice, but in the end, it comes down to what you actually shoot. I’ve got some wilson combat 10 round mags too. Very nice.
Thanks for the review. I get to pick mine up in 7 more days! Can't wait.
I have run a two piece guide rod for nearly 30 yrs now and never had a problem with loosening. A dab of never seize on the threads or even heavy grease will add just enough friction to keep it from loosening.
Thanks for sharing! Thats what I ended up doing.
@@GatCat Happy to help
Just picked one up and absolutely love it.
NICE! Are you in California?
Nice videos. Keep them coming dude.
Thanks man!
Great video! It has fully supported ramped barrel?
Yes I believe it does, I could be wrong though.
Time to get a holster for those range sessions, if you haven’t already.
I like my SA 1911 in 9mm as well. It is very accurate from the box. I prefer the stock front sight though.
Like the grips you installed.
Good shooting on that small plate.
Thanks!
Great video man! Keep it up 🇺🇸🔥
Thanks Joe!
Hey need a check mark.
did you find that the .180" tall DP front sight to be a good height? -- they offer like 100 heights lol
Their dimension options are endless. I got my dimensions by talking to another guy on calguns.net. Sights alone annoy me. All of the different cuts. Sizes. Etc.
I would take any of those beautiful pistol but in 38 Super. Nice video.
38 super??? South of the border maybe ;). Thanks for watching!
@@GatCat
Good memories from the 80s and still favorite caliber.
I love my Pachmyer grip.
They are very nice.
Does the mc operator have the checkered front when the pachmyer grips are off
Did you have any issues putting on that Dawson precision sight? I like the sight you put on your SA 1911 and I am thinking of putting one of those on mine. Those black on black sights don’t do it for me.
What magwell did you put on your MC Operator? I've been trying to find one that matches the black slide and yours looks great!
Thanks for this video. I have one I'm planning on adding a few touches to like you did. What was the turn around time at Clark custom?
It was just a few weeks. They told me it would take 30-90 days, but it didn’t take much time at all.
My 1911 .45 cal. target stainless springfield armory is coming home in just couple of days im very excited 😊🤗😃😎
NICE! Have fun with that!
@@GatCat just got my 1911 .it is absolutely beautiful girl. I did change the rod system and I also did my slide flat sides mirrow polish myself and it looks amazing. It shoots great for a .45 not to much recoil and I can def see why choosing a 9mm will be almost not recoil at all once again great pistol and great grios u got there my friend 👍
The only thing I dont care about with that gun is the guide rod. Its not a big deal but its not needed and makes break down more complicated in my opinoin for no reason. A lot of people say that guide rod does all these wonderful things but In my experience it dont do nothing but get in my way when taking the gun apart.
Awesome piece. But yes scratches easily. If you take 1600 then 2000 sandpaper you can easily remove them.
I went and got the sand paper but am hesitant to take it to the frame. I started with a magazine and it didn’t turn out all that well.
Getting ready to buy a 9mm target 1911 and came across your review. This is a great video of your Springfield Loaded 9mm! Where did you purchase your front sight and Ed Brown two piece magwell? How is she shooting? Thanks!!
Front sight is From the Dawson precision website. The magwell is from Ed Brown’s website. I recently ran into bad malfunctions, with the firearm locking up. Chamber was too tight. I contacted Springfield and they recommended I use only two types of ammo. That is not an option, so I had a gunsmith use a chamber reamer and now back business. The gun runs great. I like it a lot.
@@GatCat Appreciate your update and glad to know that you are up and running again! Best regards
@@chazt4863 thanks Chaz! Comments like this bring me a lot of encouragement. You are awesome! Any kind of video you’d like to see in particular ?
@@GatCat Well deserved! I have been interested in the exact same 1911 in 9mm and was fortunate to have found your review. I contacted Springfield Armory and they guided me to a dealer who has that same model in stock. Planning to place my order next week. Also reviewed the Clark Custom gunsmithing services....good stuff, sky's the limit! I think I do the 25LPI, G10 grips and the two piece magwell. Would be great to see any accuracy shooting sessions with your SA 9mm. I'm subscribed.....Thanks!
Hi why are you having COLT grips on a Springfield ? Thank you I apologize my bad they are Pachmayr not Colt.
Oh ya that logo looks similar to the Colt. Those are the grips that come with the MC operator.
👍👍👍👍👍❤❤❤❤❤
What mag is that in the picture at the end or your video in your mc operator???
@@rchavez1107rc it looks to be an 8 round stainless. Could be Mec-Gar, Ed Brown.
Looks awesome
If california puts this off the roster people are going to be depress forever
What grip is that on the other 1911 i like that it has wrap around checkering without the finger grooves
Pachmayer grips. They are about $25. Fairly common.
@@GatCat some how ive never seen them lol i always see the wrap around houge but i dont like the finger grooves
@@jamesbronson1448 the wrap around hogue is a lot more popular indeed. These Pachmayr grips are the grips that come with the MC Operator. If you are looking for some kind of texture on the front strap they are great. Very comfortable. They are a bit thick though. Thicker than a standard 1911 grip.
Where can you get one in California? Can’t find any nowhere
How long have you been looking? What websites do you frequent? This one I picked up from Sportsmans warehouse by purchasing online and picking up in the store. However, I see them on the used market every week. It shouldn’t be Harding finding one.
@@GatCat I just looked online and seen the sportsmanoutdoor warehouse! I’m thinking of an1911 ronin. I purchased yesterday a berreta sky storm but I’m thinking of canceling that one and buying a 1911 and having it shipped to my local dealer. Thoughts on that?!
@@bennyduran6960 the ronin is not on the roster. I would suggest taking a step back and figuring out what you want by holding a few guns. Shoot them. Then, after you know what you want seek it out. Different people will have different opinions of what gun to get. I have a video titled top 5 tips for the new gun owner, you should check that out.
Happy to have found your channel while browsing my “extended” CA options for a good 1911 in 9mm (LOL); my FFL thinks this is not in the CA DOJ roster but I saw this gun in it just today. Will probably need a new FFL. Now, how would you compare this gun versus the Kimber Target stainless II?, tightness of both guns? Reliability? Parts and customer service comparison? . My other 1911 is. 40mm Para USA P-1640 I brought with me when I moved here years ago and I am looking for an aftermarket mag well, do you know where can I get one for that double stack gun?. Stay safe and thanks for the info!
Thanks man! I guarantee I can find you one under $1000 if you don’t mind subscribing and sharing my channel as much as possible. Anyway, I’m really trying to gear my channel towards educated CA gun owners. Not in a legal sense but basically the issue that you are running into. In CA, there is a Roster. So it all comes down to the part # This is P19134LCA. I believe Springfield also makes a version that has Novak sights on it, which makes it off roster. The Kimber is even trickier to get because in the two years of looking for one I have never found for sale. Even before this gun craze. Also, if you ever find a Kimber Stainless Target II there is VERY high probability that its off roster as they make thousands of those for the the free statutes. The finish is not as good, and it comes with a plastic Main Spring Housing. In. Addiction, there is no memory bump on the grip safety, so you’d be more much more likely not fail to fire the gun under stressful situations. There is a very large following for Kimber , they are beautiful guns. But ever since there Quality control issues, I won’t ever buy one, as their Customer service isn’t great either. Lastly. If there was a big demand for them in CA them we would see at least as many as the springers. I could be completely wrong on Kimber but I’ve owned over 4 Springfields and not one of them has malfunctioned one time. Even after 10K total rounds. Let me know you if you have any other questions. Thanks for reaching out. If you want to talk more on phone more about this let me know,
@@GatCat just subscribed to your channel and Heck yes, I will call you for advice. Again, super interested if the Springfield can be obtained at less than $1K , let me know !
@@GatCat can you share a phone number?
@@calircpilot4261 oh sorry. Find me on cal guns. I am Mr. Blue
great gun!
Thanks, Springfield did a great job.
Beautiful 1911, I’m looking to do exactly what you had performed on my Loaded Target. Can you give me a ball park what to expect to have the mods completed labor wise. Thank you for a great video! Skt
A ball park in cost?
@@GatCat I’m sorry for your mods the cutting of front strap the undercut trigger and polishing of dulled areas what can I expect to pay for the custom work. Skt
@@sktt6188 it really depends on what company you go with and how they do the front strap checkering. There are three different ways. By hand, mechanical machining and automated machining. That said, mine was $140 for 25LPI, then $50 for magwell blend, $50 undercut trigger guard, refinishing $50. Shipping was about $50. The entire thing came to around $400 if I remember correctly. Most places charge $250-$350 for front strap checkering and have a very long turn around time. Clark customs had amazing prices and quoted me a 30-90 turn around. They had it back to me in 3 weeks. When I did get it back, I noticed that they had scratched the snot out of the gun. I didn’t mention this in the review because they made everything right by refinishing the gun again. The only issue was having to wait another 2 weeks to get it back again. I would recommend skipping the blending of the magwell unless its done very very well with a corresponding magwell. Mine just looks ok, not worth extra money as it does nothing different than a standard magwell. Sorry for the long response, I hope this helps. Lmk if you have any other questions.
Who made your blue G10 grip? Looks cool!
Thanks man! Those are Guuun grips. $25 Amazon grips.
@@GatCat cool, thanks!
They look amazing!
A couple of lovely 1911s KC :)
Hey NEIL! Thanks for checking them out! Did you leave likes? I’m trying to grow the channel. Also subscribe? Lol.
@@GatCat Yes I did and ive subscribed subscribe KC :)
@@neiljvoice1603 there is a dry fire system that I use at home that has helped me a lot with accuracy. You could potentially get an air soft gun that is a replica of a favorite firearm and do the same. I hope all is well across the pond. I love the Beatles, Rolling Stones, LED Zepellein, The Who, Pink Floyd etc...
@@GatCat Yes I have a very old 1911 non firer that I practiced with many a time :)
@@neiljvoice1603 you’ve got a great voice! I appreciate your input in the livestream! Have a great Christmas!
Where did you get the grip covers?
I'm actually looking for some front strap checkering. How long did it take Clark Custom to do all that work?
2 weeks. They told me it would take 30-90 days, but it just took 3 weeks from sending it off to getting it back. I did however send it off before all the panic buying. Logan Clark is the only person that does the checkering, so if he is backed up, it could take a while. I suggest going with 20 LPI, I did 25LPI and its just not sharp enough for me.
That's pretty remarkable. I've got an MC Operator just like yours and I just can't stand the smooth front strap. Thanks for getting back to me, I'm gonna give them a call and tell them you sent me.
@@KatoCoyoteCombatWorkshop they won’t be able to refinish your MCO. they have to send it to a third party. If you want front strap checkering on the MCO, you should consider sending it to Springfield. They are the only ones that will match the frame. Otherwise it’s going to be completely cerakoted in whatever color you choose.
@@GatCat I figured as much when I found that they only did bluing. Unfortunately Springfield has dropped consumer custom work, but I have a local cerakote pro who might not get it perfect, but good enough for me. Thanks for checking in.
@@KatoCoyoteCombatWorkshop that is such a bummer. Lately my experience with Springfield has been concerning. They were to send me a replacement 2 piece guide rod and sent me the wrong part 3 (not exaggerating) times. I’m now waiting to see if they can send me the correct part or not. Its really confusing.
Should consider the Dan Wesson Specialist in 9mm stainless steel
The plan was to get a PM9, however in CA finding one of these is difficult and expensive. I did however pick up a Dan Wesson Commander Classic. I have a video on that.
@@GatCat I saw that...nice review! Come to think of it, there's a Commander version of the Specialist too. Was that available to you at the time?
I'm in northern CA & I want one of these too but everywhere I go looking for one they say they haven't gotten any in years.
I live in northern ca myself. Try sportsman’s website. Buy it online, pick up in store.
This is true. Your best bet is it stay in touch with distributors. Get to know when they receive shipments. Then give them a reason to contact you when they get one in. Just grow a rapport really.
i understand purists wanting to gatekeep the 1911 and saying it 'has' to be 45 ACP as things i collect i believe in purism, too. were i a collector/purist i would tear the 9mm fans up, lol. my first gun will be a SA 1911 garrison 9mm, though, and i don't feel a bit bad about it any more than new corvette owners feel bad about their cars... which i don't consider real vettes, lol.
Honestly at this moment in time I would recommend your first 1911 to be the Springfield Prodigy. 9mm obviously. I have a 4.25” myself with a Holosun 507C. Regarding “purism” what is a 1911? Is it the original John Browning design of 1911? Or is it the 1911 A1, which saw the most military use? Can it have a beaver tail or long trigger? What about sights and grips? Can it be a series 80? The list goes on as every single component has been changed through the years. Personally, my deep appreciation for the handgun is what caused me to mention the sentiment regarding 45ACP. Considering all aspects and potential changes/upgrades to the 1911, 45ACP is simply rooted in its inception and pedigree. So why choose 1911 if not for the connection to the greatest American handgun of all time? Any “purist” touting the sacrilege of 45ACP most likely owns a MSH that is straight. Or upgraded sights or whatever else. So that, forgo the 45ACP and go nuts.
@@GatCat no doubt a purist would say the 1911 starts with the 1911, not the predecessors (which were 38, not 45 i believe) and maybe even claim it has to be a colt design. mostly they would probably say it has to be a 45 ACP. i get it, i say it's not a mustang if it has an electric motor. i'm sure they'd argue the A1 is a true 1911 because of that spirit and direct connection, perhaps even saying some of the changes were because of the military and not necessary improvements over a long history to remain relevant.
i get gatekeeping and have no problem with it. if someone says it's not a 'real' 1911, i'm not going to argue with them because i fully understand the passion involved.
@@ryanbarker5217 well I was agreeing with you basically. Also, who cares what anyone thinks right?
@@GatCat oh, i wasn't really taking it as a debate, per se, just conversating.
anyway, if i have the time tomorrow i'll run up to the gun shop near me that has the garrison i want. i appreciate the advice on the prodigy, but after all the research and having held the garrison, i have to pull the trigger on a purchase eventually. if they have a prodigy i'll definitely check it out, hold some more handguns while there just to be sure while hoping they don't mention the words 'glock 19' to me. not sure what the paperwork entails exactly, i think the waiting period is 3 or 4 work days.
@@ryanbarker5217 the garrison is a great value I think. I know that some of springfields newer 1911’s used plastic triggers and a lot of MIM parts. However, these differences will most likely not cause the gun to function any worse. If you have never fired a 1911 9mm you are in for a treat. It’s like shooting a BB gun. Very easy.
Will it be sent to India?
Hey 9mm is definitely faster than 45ACP but I’m not sure if these rounds can make it to India.
King 🤴 James Danny green 3s!
Danny Green did miss that game 5 three pointer, but they won. So I’m good with that. Now, I must ask, where did this comment come from?
@@GatCat pti Lebron time line
@@GatCat you said where Lebron doesn’t see every equals which is flase but what do you mean by that
@@GatCat yea oh that’s where I find it idk why you said but hey man it’s ok you can change your opinion hey man we all love Lebron he’s goated king 🤴 James Danny green 3s!
@@GatCat it’s ok man you love Lebron I love Lebron to we all love Lebron king 🤴 James Danny green 3s!
Clark , C'est bon est une Louisiane magnifique .
Merci, ils ont fait un excellent travail.
CA Compliant Selling for $2100 on Gunbroker 🤔😬
Lol. Not good.
wow, I am almost tempted to sell mine at that price!