Hola saludos , en tu video se ve cuán fácil tú levantas con un destornillador la parte donde están los cables , en mi caso es una Higtlander , tú me diste los colores de los cables y creo que puedo hacer el trabajo , mi único detalle es que no he podido levantar esa parte de la caja de los fusibles , gracias y bendiciones 🙏
Saludos, la pieza que remuevo lleva un tornillo 10mm hacia el guardalodo. Cuando tome el video ya lo habia sacado. No recuerdo si la Highlander es igual.
@@efgarcia7354 gracias , posiblemente eso es porque tiene unos pestañas que al apretarlas debe salir y no sale , y la caja es bien parecida o diría que es igual literalmente , gracias , buen descanso 🙏
What a great job! Thanks for the video. I got 2011 Toyota Venza just yesterday, and I did not notice anything about the headlights when purchasing it. But the low and the high beam both does not work. The fuses are checked, the lamps are in working condition too. How do you think, is that the same problem as described in video?
Buenas tardes. Espero se encuentre bien. Tengo una consulta, cuáles especificaciones del relay se requieren para una highlander 2008 con DRL cuyas luces altas no funcionan? Saludos
So my gray trigger wire has 13 volts when high beams are OFF and 0 volts when high beams are ON. I can not find a wire that is hot when high beams are ON and off when high beams are OFF. Do you think I need a new light module?
Hi. This is because you are testing voltage from ground. Do the same with the test lead to positive. The signal coming from the dimmer switch is negative polarity. If you already check the fuses and bulbs and the high beams don't comes on, the light module would be the problem. Follow the video to do a sucesfully repair.
Buenas tardes sabes tengo un problema con esa caja mi guagua no prende estartea prende todas las luces pero no enciende golpeó esa caja y prende clara mente el problema es eso q recomienda comprar esa caja o aser ese yompeo si ese fuera la solución gracias
Saludos. Estas en lo correcto. Ese modulo a parte de las luces, controla muchas cosas mas con relays integrados q fallan. Quizas un tecnico en electronica pueda repararla como hice yo con una q no prendia. Pero lo mas facil es comprar el modulo, instalarlo y ya. El jumper del video es para otro problema.
@@jesusnieves2161 mi hermano ese problema lo hacen todas tarde o temprano. No se cuanto vale la caja, pero por lo menos la instalacion es facil y la puedes hacer tu mismo.
I have an 09 camry here that i tore apart that module with the relays inside. It turns out Toyota used 2 relays for the low beams, and a solid state relay for the high beams
Hi, Boricua, Soy de Puerto Rico tambien. Tengo una 2013 Highlander Base v6, No me salen los mismos colores de cables, entiendo que mi guagua es diferente, el módulo es diferente y en la cantidad de plugs que tienen. Tengo una 2013 Toyota Highlander Modelo Base "económica" V6, 3.5Lt Me interesa que me indiques cuales son los cables que debo conectar al el Relay. Si es tan amable, se lo agradezco. Le envie Fotos por email del modulo. Gracias
Los cables de las luces largas en tu guagua son el B2 amarillo y el B3 verde. Esos dos cables van juntos como se ve en el video en el minuto 2:40. La señal de las luces largas es el azul D6 que esta conectado al amarillo del video en el minuto 3:22.
I have been trying to find the signal wire from the dimmer switch but i cant find any,i put the test lead to positive,the bulbs and fuses are ok,i put a positive current directly to the fuses and the high beams lights up,but finding the signal wire from the dimmer switch is where im stucked,pls help
Just took my wife’s 2011 Venza to Toyota to see why the highbeams (not working at all, even after lightbulb change) and headlights(working but seem dull). They say it’s the “ power distribution in fuse box not supplying power to headlights.” Is this the same problem going here?
Hi. Yes I think so, but some test are needed to be sure. Provide power (12v) with testing tool or bare wire to the high beam fuses (from positive terminal of battery directly to high beam fuse) and see if the high beam bulbs comes on. If they comes on you have to do this procedure or buy a brand new junction block.
@@phro321 if you do the procedure with common circuit tester you never notice if the circuit is working properly because the tester lights up with 3v or 12v, but let me know the results.👍
@@efgarcia7354 I don't have the proper testing tools to check this but I can do the bare wire trick. So just take one wire and connect it to the positive side of the battery and touch the other end to one of the high beam fuses on the fuse panel? like number 38 or 39?
I have a 2008 highlander that in believe is having the same issue. Any chance you can help me out. I cant find the wiring schematics without having to spend some coin. Id appreciate any help.
@@efgarcia7354 Is there any way you can help me with this issue on my 2008 highlander? Like type me up a set of instructions as to what wires I need to be messing with. I can't get the vehicle registered and licenses cause it fails safety inspection in my county and state where I live. I can tell you my email if you this its easier to send me any info that can help me do this modification.
Hi, I need more info about your car. HID's low beams or alogen? Also I want to know the trim. At this time the hi beam lights wires of your highlander are the green and yellow, both are side by side before black and brown. The dimmer signal wire is a thin blue one before a brown. Its all I can toll without a pic. Remember, you have to test it correctly, you have to be sure of all connections. I post my email in the description if you need it.
Hi. Because the owner of the vehicle agreed to fix the problem quickly and cheaply. He did not want to buy a $250+ junction block that can be damaged over and over again.
Did the Fix on my 2013 Highlander , only changed the colors of the wires ( as told by the Video poster) Works Great . Thanks a lot
I just did this fix for my wife's Venza, thanks mate! Saved me almost $200
👍👍👍
Hey man just did this for my mom’s low beams, you saved me!
Good to know that!
Hey man, you just saved me nearly $400. The dealership wanted that much for the fuse block.
👏🏾👏🏾👏🏾 👍🏾
@@efgarcia7354 I ended up having to cut some of the plastic out because I couldn't find a small enough relay, but everything else works perfectly!
I'm happy to know that you have the skills to get it done by yourself.🎉
Thats exactly how i fixed mine
This is an awesome video!!!! Extremely great job!!!
👍🏾
Hola saludos , en tu video se ve cuán fácil tú levantas con un destornillador la parte donde están los cables , en mi caso es una Higtlander , tú me diste los colores de los cables y creo que puedo hacer el trabajo , mi único detalle es que no he podido levantar esa parte de la caja de los fusibles , gracias y bendiciones 🙏
Saludos, la pieza que remuevo lleva un tornillo 10mm hacia el guardalodo. Cuando tome el video ya lo habia sacado. No recuerdo si la Highlander es igual.
@@efgarcia7354 gracias , posiblemente eso es porque tiene unos pestañas que al apretarlas debe salir y no sale , y la caja es bien parecida o diría que es igual literalmente , gracias , buen descanso 🙏
Cierto, tiene dos pestañas a cada extremo. Con destornillador por cada lado es mas facil.
Thanks you my friend
Thanks for your video that was a life saver.
Your welcome.
What a great job! Thanks for the video.
I got 2011 Toyota Venza just yesterday, and I did not notice anything about the headlights when purchasing it. But the low and the high beam both does not work. The fuses are checked, the lamps are in working condition too.
How do you think, is that the same problem as described in video?
May be the same problem but, some test required.
Buenas tardes. Espero se encuentre bien. Tengo una consulta, cuáles especificaciones del relay se requieren para una highlander 2008 con DRL cuyas luces altas no funcionan? Saludos
Saludos. Yo trato de utilizar el relay mas pequeño por lo menos de 15A 12v.
My headlight works sometimes. Is this the same issue? Thanks.
So my gray trigger wire has 13 volts when high beams are OFF and 0 volts when high beams are ON. I can not find a wire that is hot when high beams are ON and off when high beams are OFF. Do you think I need a new light module?
Hi. This is because you are testing voltage from ground. Do the same with the test lead to positive. The signal coming from the dimmer switch is negative polarity. If you already check the fuses and bulbs and the high beams don't comes on, the light module would be the problem. Follow the video to do a sucesfully repair.
I have no clue how this got fixed 😩
Buenas tardes sabes tengo un problema con esa caja mi guagua no prende estartea prende todas las luces pero no enciende golpeó esa caja y prende clara mente el problema es eso q recomienda comprar esa caja o aser ese yompeo si ese fuera la solución gracias
Saludos. Estas en lo correcto. Ese modulo a parte de las luces, controla muchas cosas mas con relays integrados q fallan. Quizas un tecnico en electronica pueda repararla como hice yo con una q no prendia. Pero lo mas facil es comprar el modulo, instalarlo y ya. El jumper del video es para otro problema.
Con razón todas las q consigo no tienen esa parte gracias y bendiciones
@@jesusnieves2161 mi hermano ese problema lo hacen todas tarde o temprano. No se cuanto vale la caja, pero por lo menos la instalacion es facil y la puedes hacer tu mismo.
Si se consigue de 200 a 300 por eso te pregunté si se podía aser eso pero nada es mejor cómpralo y resuelvo 👍
same process goes for low beams im guessing right ? in mines is the low beams giving me issues
Maybe the same issue. Test the dimmer signal first.
I noticed that the module has screws on one side, you can make a video opening it and look for the ralay that is failing
Maybe later.
I have an 09 camry here that i tore apart that module with the relays inside. It turns out Toyota used 2 relays for the low beams, and a solid state relay for the high beams
Hi, Boricua, Soy de Puerto Rico tambien. Tengo una 2013 Highlander Base v6,
No me salen los mismos colores de cables, entiendo que mi guagua es
diferente, el módulo es diferente y en la cantidad de plugs que tienen.
Tengo una 2013 Toyota Highlander Modelo Base "económica" V6, 3.5Lt
Me interesa que me indiques cuales son los cables que debo conectar al el Relay.
Si es tan amable, se lo agradezco.
Le envie Fotos por email del modulo.
Gracias
Saludos, verifico!
@@efgarcia7354 Muchas Gracias !
Necesito saber que es lo q no te funciona ahora mismo. La luz corta o la larga?
@@efgarcia7354 Solamente La luz larga No funcion, todo lo otro esta Bien. No tengo Largas.
Los cables de las luces largas en tu guagua son el B2 amarillo y el B3 verde. Esos dos cables van juntos como se ve en el video en el minuto 2:40. La señal de las luces largas es el azul D6 que esta conectado al amarillo del video en el minuto 3:22.
I have been trying to find the signal wire from the dimmer switch but i cant find any,i put the test lead to positive,the bulbs and fuses are ok,i put a positive current directly to the fuses and the high beams lights up,but finding the signal wire from the dimmer switch is where im stucked,pls help
Hi, can I get your car model and year?
So the problem was with the Light control module/solid state relay/mosfet (for DRL)?
Yes
the better way is to just replace the junction block correct?
Yes!
whey after making the jumpers from the source to the headlights you did not remove them from the connectors
Because is not necessary.
Just took my wife’s 2011 Venza to Toyota to see why the highbeams (not working at all, even after lightbulb change) and headlights(working but seem dull). They say it’s the “ power distribution in fuse box not supplying power to headlights.”
Is this the same problem going here?
Hi. Yes I think so, but some test are needed to be sure. Provide power (12v) with testing tool or bare wire to the high beam fuses (from positive terminal of battery directly to high beam fuse) and see if the high beam bulbs comes on. If they comes on you have to do this procedure or buy a brand new junction block.
@@efgarcia7354 I checked all the fuses and they all light up the fuse tester, but I’ll do this also try and update. Thanks for the reply
@@phro321 if you do the procedure with common circuit tester you never notice if the circuit is working properly because the tester lights up with 3v or 12v, but let me know the results.👍
@@efgarcia7354 I don't have the proper testing tools to check this but I can do the bare wire trick. So just take one wire and connect it to the positive side of the battery and touch the other end to one of the high beam fuses on the fuse panel? like number 38 or 39?
@@67Swepty exactly, but right now I don't know if 38 and 39 are the correct ones because I dont have schematics on hand.
Hola , donde usted tiene el taller de mecánica , yo estoy en Puerto Rico .
Saludos, tengo negocio en Maunabo. Automania Car Audio & Electronics.
Gracias , tengo una Higtlander 2008 que no me da la luz larga , solo corta , pero estoy en Orocovis PR
@@RobertoDiaz-kg9nlpudieras conseguir a alguien que haga el proceso cerca en tu area?
@@efgarcia7354 si lo voy hacer , tengo el video que tienes en UA-cam y me diste los colores de los cables , gracias mucho éxito y bendiciones 🙏
@@RobertoDiaz-kg9nl es posible q cambien los colores en la highlander. Creo q aqui escribi los colores para ella.
My venza the high beams don't work. I need help. Bulbs look good.
Here are some replies with basic instructions of how to test the bulbs from the junction box.
I have a 2008 highlander that in believe is having the same issue. Any chance you can help me out. I cant find the wiring schematics without having to spend some coin. Id appreciate any help.
Yes, but I have the schematics in my work. I'll be there on Tuesday.
@@efgarcia7354 Is there any way you can help me with this issue on my 2008 highlander? Like type me up a set of instructions as to what wires I need to be messing with. I can't get the vehicle registered and licenses cause it fails safety inspection in my county and state where I live. I can tell you my email if you this its easier to send me any info that can help me do this modification.
Hi. Of course, give me a couple of days.
@@efgarcia7354 appreciate it greatly!! I will compensate you for your time if this works out. Dont have much to give but i’ll do what i can.
Hi, I need more info about your car. HID's low beams or alogen? Also I want to know the trim.
At this time the hi beam lights wires of your highlander are the green and yellow, both are side by side before black and brown. The dimmer signal wire is a thin blue one before a brown. Its all I can toll without a pic. Remember, you have to test it correctly, you have to be sure of all connections. I post my email in the description if you need it.
I have 2008 Higtlander and have the same problem , need help
Hi. Is the same procedure but diferent wire colors. May be the same connector pin numbers.
Highlander 2008 dimmer switch signal wire is blue, pin E11 2:14 of video.
High beam wires are yellow and green, pin B2 and B3 2:43.
Where is the 2008 Toyota Higtlander high beam relay ?
my car's dipped headlights don't work what should i do?
Toyota Venza?
My highlander 2011 need the same work but not the same conector
Hi. I did this repair in a Highlander too. If you want to do the procedure, I can give you the info.
Sure yes
I found a diagram that has the color map and I was able to solve it, you were essential in my repair I appreciate it
@@eddierosa7473 👍🏾
Hi! Where is your garage located?
Puerto Rico.
What size fuse in fuse holder?
Hi 15A would be fine.
Why didn't just change the original relay for a new one?
Hi. Because the owner of the vehicle agreed to fix the problem quickly and cheaply. He did not want to buy a $250+ junction block that can be damaged over and over again.
@@efgarcia7354 ahh I see. So the high beam relay wasn't the problem? The whole block was?
@@BadWeatherfreak yes, but the junction block don't have serviceable parts. The lights are controlled by transistors, not relays.
@@efgarcia7354 is that something like autozone determine if I take ir there?
@@BadWeatherfreak I dont think so.