Hardware Store Lightsaber Hilt! Homemade! All metal! Star Wars!
Вставка
- Опубліковано 17 кві 2020
- All metal, non-functioning static prop hilt. No electronics just a cool looking cosplay prop! Everything in the video is available at Home Depot and Lowe’s in the US, instore and online.
PARTS LIST:
1x Brass Sprinkler Head
1x 5/16-18 (Corse Thread) Threaded Rod 12”
1x 1-1/2” Chrome Tube (Plumbing) 12”
1x 5/16-18 Square Nut
1x 5/16-18 Chrome Cap Nut
2x 1-1/4” EMT Set Screw Connectors
1x D-Ring (probably in art hanging area) with screws
26x 1-1/2” 5/16 Fender Washers
2x 2” Flat Washers
2x Brass Garden Hose cap
18x 5/16 Flat Washers
6x 3/8” Flat Washers
Either 2x 5/16 Set Screw Collar Sleeve
Or 1x 5/16-18 Long Hexagonal Lock Nut
Some Electrical tape or 1-1/2” Heat Shrink tubing
Some flat black spray paint and some matt clear coat spray.
Masking tape and obviously a few tools.
Have fun and enjoy!
I’m an electrician so I always look for parts around the site that I can use 😂 “ this will make a fine addition to my collection “
This is one my top favorite diy lightsaber builds. Extremely simple and the result is as close to a machine carved one as you get!
I read the thumbnail as "hardware store $4000 all metal lightsaber hilt" and given how insanely expensive some lightsaber replicas are out there I wasn't even going to question that price
I was able to use your technique and make my own hilt!! Dude I'm so freaking excited right now.
There was a time about 12 years ago where plumbing lightsaber videos were all I watched. Thank you for the nostalgia
Really awesome build. This gave me some ideas to start from. I have always been a fan of the Luke Skywalker ROTJ Lightsaber. Thank you for sharing the parts list.
Thank you for this. I built my own lightsaber, and was heavily influenced by your video here. Thank you for taking the time to post this.
Good formatting. Closeups, step by step instructions, details...this is a good how-to and I've linked it in a Star Wars costuming group on Facebook.
Thank you so much for this video. I just made one and a box for a friend. I am really pleased with it. I turned mine into a marshmallow roaster. Thanks again for making this video. My friend loved the gift.
Dude, this is AMAZING! Maybe the best DIY lightsaber hilt I ever saw. Thank you so much!
This guy deserves so much more then 86 subs, he even put in the time to make a tutorial. Sub to this guy
i’m currently trying to build this hilt.. been going around different hardware stores to plan a day out to build it... so far it’s the best build i’ve seen on youtube!
Thank you so much! Enjoy!!!
Exactly what I was looking for. Thanks!
Came here from the Star Wars lightsaber group, awesome video!
Dude, this is a freaking awesome build. That sprinkler head makes this design a home run.
Thanks!!!
@@darranrobinson550 Hoping I can find these parts or similar to make one of these. I really like the threaded rod core to really make a nice "stacked" hilt
Awesome build.
This is awesome!
That is beautiful.
Dr. Coomer thanks!
This is the best one I’ve seen ! Nice job
Thanks!!
That was a great vid. Thx for sharing!
This is so cool!
This is very cool and I want it badly. Also it looks like obi wan kenobi lightsaber too
Now this is a civilized weapon!
woow, amazing work, Darran dude, super simple super efective look, i been wanting to do something like this but i tought so complicated but the solution was very simple, thanks a lot, i will do my own :D
You’re very welcome! Have fun!!!
Definitely deserve more subs
This ia how every jedi makes their lightsabers
really decend job sir :) i like it a lot wish you much more subscribers
Very cool. Do more
Very nice
So I finished it, turned out great, I could have never thought this up on my own, I only changed a few things too. I epoxied a 2” washer on top of the sprinkler head and replaced the cap nut with a regular nut, just looked better imo. I also removed the 2” washers around the base along with the along with the fasteners on the EMT connector. It just didn’t look right or feel right in my hands, the diameter of those two pieces just made it awkward for me to hold so I removed them and that made it much better. Wish I could send you a pic. Like I said, this build is great and you did an awesome job, thanks!!!
Sonicwind awesome! I designed it so that anyone could customize it and make it their own, and you did just that. Well done. I hope you enjoy your new hilt!
Darran Robinson trust me I am enjoying it, now I just have to figure out how to put a blade on it and sound effects
Sonic wind, if you find out how to add a blade and electronics, could ya post a “how to”?
@@zednoraayea I doubt it’ll be able to take a hit in sparing but I could figure something out
Yes thanks
Love this! I made a few modifications in my build (used a bumper bolt and another long hexagonal lock nut instead of a square nut as well as filled in the notches and lettering on the sprinkler head, etc.) and weathered it differently than you but this was so fun to build. Love the weight and feel. It is my prized display. Wish I could post a pic....
That’s awesome! I wish I could see it too!
How did you fill in the lettering on the sprinkler head? I was going to consider grinding it down in some way.
@@kle2217 I used a product called SteelStick from JB Weld. It’s a steel reinforced epoxy putty. Once I filled in the lettering, I sanded it all down flush and painted the sprinkler head a metallic gold. Worked great at filling in the sprinkler notches on the edge as well.
@@griflynn Thanks! I’ll have to look for this.
I'm gonna build this with my dad.
Awesome! Have fun!!! May the force be with you both!
@@darranrobinson550 And may the force be with you, too.
Looks like a combination of Cere Junda’s and Luke Skywalker’s lightsaber
Dude this is one of the best DIY hilt videos I've seen! Any advice for making Graflex inspired ones?
I did some Graflex type hilts but it was much more trial and error compared to the Obi Wan/ROTJ Luke style. I guess I would say it’s all about finding a cool emitter shroud that will look the part as the rest is really just a stainless tube with greeblies on it and some windshield wiper blades for handle grips.
What size for the hose caps 3/4?
Hey This was a great tutorial and I’m trying to make one! Do you cut the pipe? If so to what length??
Tiger around 5.5-6 inches roughly. But it’s totally up to you.
Love the build and am currently gathering what I need to make one.
RE: Pipe length, based on a screen capture and some forensic photoshopping, the tubes used in the video (0:00-0:11) are barely shy of 4.1875" long (approx. 4.16 for the finished hilt and approx. 4.13 for the cut tube in front of it). That's based on the proportion of the lengths of tubes to the lengths of EMT connectors (known dimensions).
This looks absolutely amazing! I wanna do one own too but I'd have a question:
What is this cook EMT connector part and where should I look for getting one, please?
I'm not native English and wasnt able to google it out 🙂
Here’s a link to Amazon Sigma Electric ProConnex 55233M EMT Set Screw Connector 1-1/4-Inch, 1-Pack www.amazon.com/dp/B00C3YCTR8/ref=cm_sw_r_cp_api_glt_fabc_T8CBG2VWE24K9W9GZS4A
What type of pole ?
How do I add soundboard and light?
Made mine too. Didn’t even need to go to the hardware store.
Add a photo so we can see the finished product!
@@darranrobinson550 drive.google.com/file/d/1-VCf1T_8YTuzPhMM-nVwmQDNO2LgcaWT/view?usp=drivesdk
Do you remember which emt connectors you used (what brand/type)?
Nvm, I searched in comments and found it👍
Awesome work! Quick question, how much did this run you to make?
$40 or less!
Did you buy a steel galvanized pipe or a chrome plumbing tube? both are similar. Also, where did you cut the tube, because there appears to only be one threaded side when there should be two?
ETHAN GOODE it’s brass chromed bathroom down pipe and I cut it somewhere around 4.5-5”
@@darranrobinson550 In total length or 4.5-5 inches left
ETHAN GOODE the length of the piece that is used in the construction is roughly 4.5-5” long. I usually buy the 12” piece so that I can comfortably use it for two hilt with a little left over.
Ware do you put the button
hi im building this now. coming out great! how long did you cut the metal 12” pipe to fit between the emt connectors?
Roughly 4.5-4.5 inches but it’s up to you!
This looks like a great build, however I am a bit confused on the part where you add the first EMT connector. How do you ensure it doesn't move around and how do you ensure it sticks with the washer underneath? I see that you used tape but how exactly did you do that.
The washer is inside the EMT connector and the pipe pushes the washer tight inside the EMT so it cannot move once you tighten up the bolts.
@@darranrobinson550 ohhhh i see now. Thank you so much
Amazing! What brand are the EMT?
I got them at Home Depot, not sure which brand they were. Not even sure eggy display the brand Inc there packaging
超讚的
Finally got the sprinkler head, but before I finish it, at 2:20 how long is the one on the bottom?
The overall length of the hilt can be whatever you want but I tend to go with 11-11.5” roughly.
Do you recommend Zinc or Stainless Steel? I assume Zinc just due to weight.
Yeah zinc washers for sure.
So does it move around once you assemble it or no?
JefferyTheKat not if you tighten those nuts well! The amount of pressure it’s under makes it VERY difficult to move any of the components. You could always add some rivets here and there for extra durability if you’d like.
this is awesome dude one question how did you put it all together with glue or just screws?
Watch the video. No glue used.
@@darranrobinson550 cool do you have any other kinda topping/top part ideas instead of the sprinkler head? My Home Depot don’t have it
I found all of the parts on your list. Sadly, it appears Home Depot only sells the EMT set screw connectors in packs of 20. Any source for just one or two?
I love this saber, can't wait to build my own.
Have you tried Lowe’s? I was able to source them individually at both HD and Lowe’s near my home.
@@darranrobinson550 did another search (without the dimension) and they came up in individuals. Go figure. Thanks.
Were did you get from
Are these parts in the plumber aisle or the electrical area?
A little of both! The EMT connectors will be in electrical but the sprinkler head will be in plumbing or outdoor. The main tube is also from plumbing. I believe it’ll be near the under sink parts. Good luck!
Did you cut the chrome tube? It looks less than 12" long in the video? May I ask the cut lenght?
Yes, roughly 5” is the final length of the tube.
@@darranrobinson550 Thank you! Best looking DIY Lightsaber I've seen.
questions: How heavy is it? what was the total price of all the parts? What is the length of the "Threaded Rod" and did you thread it yourself?
At the time of making this video the parts totaled around $40 US. At a guess, It weighs around 1.5 - 2lbs roughly depending on which parts you use and the material they are made from. The threaded rod is available in 12” lengths at most hardware stores and comes pre threaded.
What does the electrical tape do ?
Just for looks ?
It’s more for aesthetics that anything.
Hello can you link or tell me where you got the 2 inch flat washers and the EMT?
Home Depot and Lowe’s stock them. They are called Fender Washers.
It’s near the end of 2021. I’ve been watching these “Home Depot” style lightsaber builds since 2008. This is seriously awesome! Hope you see this.
I plan to make my very own and love your technique; although I’m a little confused on how I could modify it to add in a 7/8 or 1” wooden dowel rod to use as the blade? Can you help me out?
If you could find a way to make the “emitter” area deeper with a tube of some kind maybe?
@@darranrobinson550 that’s a good thought. I’ll have to just screw around with it and see what I can come up with. Thank you!
you cut the 12" metal tubing?
Sonicwind yes, cut it down to whatever length you prefer. I prefer 4.5-5 inches.
how do the washers not slide around? They aren't screwed on, so I'm confused as to how they stay centered.
They are sandwiched tightly once you tighten up the main shaft nuts.
@@darranrobinson550 thank you!
I used this song for an IMovie the other day😅
Any chance of a more specific description of the screw collar sleeve? I ended up ordering two and they were gigantic.
Yeah it’s an EMT electrical connector.
1-1/4 in. Electrical Metallic Tube (EMT) Set-Screw Connector
www.homedepot.com/p/202077148
@@darranrobinson550 Thanks, Darran. I got the EMT connectors. It is the Set Screw Collar Sleeve. You have listed that or the Long Hexagonal Lock Nut. for the top, just under the emitter. I like how the collar sleeve looks better, but the ones I ordered were way too big.
@@leonardapa3058 5/16 in. Bore Zinc-Plated Mild Steel Set Screw Collar
www.homedepot.com/p/203025016
@@darranrobinson550 Awesome. Thank you so much. Now I can put the finishing touches on it!
@@leonardapa3058 make sure to post a photo here when it’s done! I can’t wait do see it!!
I know im late to this, but can I use a pipe in the middle, instead of a threaded rod?
Without the thread how are you going to tighten it all together?
@@darranrobinson550 I don't know, but I need to have it hollow to put a blade in
@@fritiofclarin3611 if you figure it out you can let the rest of us know…or just watch my other video and try and figure out how I did it ;)
Where did you find I sprinkler head?
Lowe’s and Home Depot usually have them in stock.
Thanks 😊
How Long is the threathed rod
Jopa 1408 it’s 12 inches when I by it and then I trim down the extra once I’m done, so it ends up somewhere around 11-11.5” long at the end.
Is there a parts list I could have?
It’s in the description!
Is it really heavy?
Not really. It weighs less than the ones you can build at Disneyland ;)
Approximately how much did this all cost?
Sven The dog $40
Can it be modified to use with a 1/2” or 3/4” wooden dowel?
I’m not sure I understand your question...are you using the dowel as a substitute for a blade?
@@darranrobinson550 yes, you have made an incredible hilt. Wonder if it could be modified to fit a blade.
It might take some reverse engineering but I’m sure you could as my other powered models can hold a 1” diameter blade.
@@christopherpascoe2476 You could epoxy a nut into the end of a dowel and screw it onto the threaded rod.
How did you remove the sprinkler head markings?
I used a Dremel to slowly grind it down and then used a wire wheel to polish it up a little. You could also just maybe fill it in with resin or something like that and smooth it that way.
@@darranrobinson550 awesome! Thanks. Finishing up today. As everyone else has commented, thanks for a very informative video. Cheers!
@@kontradan that’s awesome! Hope you enjoyed building your hilt! Thanks!
What is the head from
The brass part? The emitter you mean? It’s a brass sprinkler head. The parts list is in the description.
how much does it all cost?
Usually less than $40
Can’t find the sprinkler head anywhere
Sonicwind Lowe’s or Home Depot should have them!
Darran Robinson I just left Home Depot, nothing, headed to Lowe’s now, fingers crossed
Darran Robinson nothing at Lowe’s either, neither major hardware stores carry it, any replacements you can think of?
www.homedepot.com/p/100112473 you can order them online
How heavy is it?
It has a substantial weight to it but no more than the hilts sold by Disney at the parks for example.
@@darranrobinson550 gotcha. Yeah all those metal parts make it seem like it would weigh a ton. But good point with the comparison to off the shelf products.Thanks!
@@NicholasIbarra01 also, I once heard that a lightsaber is supposed to feel like swinging a big broadsword so I’d imagine the hilt is heavy enough to balance the “weight” of the blade…or something like that! Hahaha!
What is the weight of it? I’d love too know!
More than one of of those fancy aluminum ones but less than the Galaxy’s Edge Disney ones.
@@darranrobinson550 that gives me a bit of perspective, but I don’t own either of those
@@MFtheo I’m terrible at guessing! I was brought up in the UK with the metric system but I’ve been in the US for so long that I’ve gotten weights so confused. I’d say it’s under 2lbs (US) for sure, maybe even closer to 1.25lbs maybe?
@@darranrobinson550 Good too know thanks!
Do you have a website?
No sorry I don’t.
@@darranrobinson550 I would love to talk to you about making me a custom hilt, is that possible?
im the 10.000 view
How much does this beast weigh?
Cern Stormrunner about 1-3/4lbs roughly.
I wondered the same thing! This bad boy is a tank.
Did you screw the bolt in before the washer cuz that don’t work the way you show 😂😂😂
@@itamikuma13 you’re the first one to have a problem, maybe you misunderstood the video? I’m not sure what part of the process you’re referring to, but I made every single one I’ve don’t in that exactly same way and it works every time. Let me know and maybe I can help you fix the problem you’re having?
Two ads UA-cam?