Thank you very much, you just saved me a lot of trouble , and you saved many people too from it, appreciate you sharing with us this solution thank you again 👍👍👍👍👍👍
Sorry you had to replace all them sensors to find out its the key immobilizer. All be it was not in vain you saved me allota heart break. A million & 1 thsnk yous. ITS A NISSAN THING
Man u video really help me to much, i remplace crankshaft sensor and camshaft sensor and fuel pump and the mechanic said he don't know what is wrong with my car and i seen ur video and i trying for a 2 minutes and this was the problem the key 🙏🏼
That is more then likely the most common problem with not starting. But I never had an issue with mine until I replaced the CPS bank1-2 with autozone sensors. Once I put in the oems from the dealer never had an issue again.
And I've read on a forum about the ignition going bad from haveing 50 keys on your keychain. That extra weight over a long period of time starts to mess with the ignition.
SOLVED- It's the wheel lock pin. STEPS TO TAKE: lOCK THE STEERING WHEEL (WIGGLE) STICK KEY IN IGNITION UNLOCK STEERING WHEEL LIGHT GOES OFF EVERYTIME START YOUR CAR YOUR WELCOME! FIX: TAKE TO DEALER AND HAVE THEM REPLACE SOME VIN NUMBERS ARE UNDER RECALL
@@mustafagak2852 I've researched (while sitting in car) open the door, close the door, set- alarm wait for the red light to start blinking, unlock both doors, open the car door, close the car door insert the ignition key and turn to Accessory, wait for 3 seconds the light should be off start as normal.
IMPORTANT - I wanted to add this to this Great Video... My 2008 350z was recently stolen and I got it back. There was little damage but the theives cut a key (which I also got back). When I tried to use MY OLD KEYS the Immobilizer refused me. ONLY When I tried the "new" key which was apparently cut from the VIN (so they could just take the car), would my car actually start. *** This means that THE KEY, even though it works, can cause the Immobilizer System to Kick in. There is some Crazy Ju Ju going on with this system!
Woou thanks to your video I know now why the red light check the fuse what is behind the battery and check the fuse and is 15 is the ignition and after change the red light go out and you can start the car
I had a similar situation with my 350z. at first I thought the car didnt start because of a bad fuel pump. it cranked over yet just did not start. I thought perhaps my key needed a new battery so I replaced the remote with a new battery. still didnt work. I then tried my spare key with spare remote and it started. turns out the original key was the problem. I thought I lost the code on the chip or the chip went bad. took it to where I bought the key. turns out even though I changed the remotes battery it turns out the chip got loose and moved away from the front area. the key company moved the chip back to the front area and glued it to the base so It could not be move. once the key was fixed the orginal key started the car right up due to setting the immobilizer off. total cost was zero since they felt it was their fault for selling me a key in which the chip shifted location internally. so my advice is if your car cant start use your spare key and see if it will start. best to start at a simple solution then work your way up.
This happened to me in school,luckily I was in my paint and body shop and me and my best friend tried to figure out what it was all day skipping classes just to figure it out. Just for my teacher to bang the shit out of the steering column and it turns on💀
this same thing happens to me but when i clean the maf sensor it starts right up. I also cleaned TB properly and got a new MAF from the dealer ship. Changed spark plugs. About to change fuel pump, crank shaft sensor and put in a new coilpack..
I got a tuned ecu that had nats deleted but the light is still solid red and I told him about it he said that it’ll always be like that but the car is cranking and doing everything that your car did it just doesn’t turn on fully and the light is always solid so I’m pretty sure he just did it wrong
You are correct. I have had the same issues with my 350Z. The work around is what is mentioned in the video. I have also replaced the key immobilizer, it still acts up at times. Its a very frustrating issue. My question: can the key immobilizer be removed?
BRO I REPLACE THE CAMS, CRANK, NEW STARTER ALMOST SPENT 1000K AND STILL NOT STARTING JUST CRANKS. BATTERY ABOUT 2 1/2 YEARS OLD, NEW ALTERNATOR UGH. MAN I WANT BEAT MY 350Z WITH A HAMMER OF FRUSTRATION BUT I CAN'T LOL. I SPENT TO MUCH MONEY ON IT AND PUT A LOT OF WORK INTO IT. AND NOW I'M ABOUT TO DROP A NEW FUEL PUMP, IF THIS SH1T DOESN'T START, I DON'T FUKING KNOW.
Men am a having prob. I cant fkn sleep. Terrified dont know wat to do. My 2008 hr starts then dies... Yesterday i had to keep my foot on accelrator if i left a bit car shuts off whats the problem?
I have the same problem,but it takes to long for the car star,anyone knows how to fix this problem o where i have to take the car for repair that problem?
@@z33_gary11 dude lmk if u solve it .. exact same shit here.. coils, crank sensor and fuel pump coming in soon. If it stalls again spray the MAF and lmk what happens.. I noticed that each time it happens i just spray the MAF with cleaner and it starts right up. Mind you its a brand new MAF from the dealership because I thought it was the old MAF. It happens when gas tanks around 1/4 and it never fills up past 1/2 tank so maybe fuel pump.. Let me know if you figure it out
Master Bruce This just happened to me U mean like nothing at all happens No start and no crank? What I’ve been told is it’s the RFID chip in the key I guess it just means it’s going bad But make sure the battery terminals and the connections are clean Maybe that could be the issue also Hope this helps man I could not find shit online for the the no start no crank no click issue
originally this worked for me but now when I turn my key to the on position, my radiator fans come on full blast and I can't even attempt to crank it because it does nothing. Any idea?
These cars are becoming scary. Too much malfunctioning electronics. It seems to me the electronics is poorly designed. Check the comments to see all the people with similar problem.
Bro! You just saved me a damn headache! I've changed all sensors to! Thank you!
Thank you so much! I nearly started replacing things, you are a life saver!
Thanks man!!! Car just locked on my brother Z!! You came to the rescue!
Thank you very much, you just saved me a lot of trouble , and you saved many people too from it, appreciate you sharing with us this solution thank you again 👍👍👍👍👍👍
Awesome!!! My car had the same issue and I try your method and it WORKS!!!! 👍👍🍻
Dude this was so helpful thank you!!!! I was really getting mad cause I couldn’t figure out why but I did it and it worked!!!!
Sorry you had to replace all them sensors to find out its the key immobilizer. All be it was not in vain you saved me allota heart break. A million & 1 thsnk yous. ITS A NISSAN THING
Thank you bro!!!! Im gonna check this out.. i was about to start replacing shit left and right
Yes yes you are Right
My man
And lots of people buy parts for the car without needing it To replaced
Man u video really help me to much, i remplace crankshaft sensor and camshaft sensor and fuel pump and the mechanic said he don't know what is wrong with my car and i seen ur video and i trying for a 2 minutes and this was the problem the key 🙏🏼
Thanks a ton! Helped me out stranded at a gas station.
That is more then likely the most common problem with not starting. But I never had an issue with mine until I replaced the CPS bank1-2 with autozone sensors. Once I put in the oems from the dealer never had an issue again.
Thanks man helped so much and worked for me👍
This was super helpful thanks I was so mad I wanted to kick my Z 😂
And I've read on a forum about the ignition going bad from haveing 50 keys on your keychain. That extra weight over a long period of time starts to mess with the ignition.
Yep. I only have 1 key and a key chain. That’s it.
SOLVED- It's the wheel lock pin.
STEPS TO TAKE:
lOCK THE STEERING WHEEL (WIGGLE)
STICK KEY IN IGNITION UNLOCK STEERING WHEEL
LIGHT GOES OFF EVERYTIME
START YOUR CAR
YOUR WELCOME!
FIX: TAKE TO DEALER AND HAVE THEM REPLACE
SOME VIN NUMBERS ARE UNDER RECALL
Michael Patterson thank you so much man
Didnt work for me 😥
@Michael It worked thanks! Did you figure out any permanent solution?
@@anudeepelineni6661 I Still have the car and this is my go-to, to get it to start.
@@mustafagak2852
I've researched (while sitting in car)
open the door, close the door, set- alarm
wait for the red light to start blinking,
unlock both doors, open the car door, close the car door
insert the ignition key and turn to Accessory,
wait for 3 seconds
the light should be off
start as normal.
It worked!! thanks so much 💖
Bro you just saved me so much time and money
Dude i usually dont comment but i love you so muchhh... was about to part out man
I’m gonna try this next time thank you for the tip
I felt the emotions when you said “ALL FUCKING NIGHT” lol
Fantastic!
IMPORTANT - I wanted to add this to this Great Video...
My 2008 350z was recently stolen and I got it back. There was little damage but the theives cut a key (which I also got back). When I tried to use MY OLD KEYS the Immobilizer refused me. ONLY When I tried the "new" key which was apparently cut from the VIN (so they could just take the car), would my car actually start.
*** This means that THE KEY, even though it works, can cause the Immobilizer System to Kick in.
There is some Crazy Ju Ju going on with this system!
Woou thanks to your video I know now why the red light check the fuse what is behind the battery and check the fuse and is 15 is the ignition and after change the red light go out and you can start the car
I had a similar situation with my 350z. at first I thought the car didnt start because of a bad fuel pump. it cranked over yet just did not start. I thought perhaps my key needed a new battery so I replaced the remote with a new battery. still didnt work. I then tried my spare key with spare remote and it started. turns out the original key was the problem. I thought I lost the code on the chip or the chip went bad. took it to where I bought the key. turns out even though I changed the remotes battery it turns out the chip got loose and moved away from the front area. the key company moved the chip back to the front area and glued it to the base so It could not be move. once the key was fixed the orginal key started the car right up due to setting the immobilizer off. total cost was zero since they felt it was their fault for selling me a key in which the chip shifted location internally. so my advice is if your car cant start use your spare key and see if it will start. best to start at a simple solution then work your way up.
Same here its cranking but no start i didnt check the key mobliser yet check engine light go and come back agine
So did you ever permanently fix it did u replace the key immobilizer at any point?
Your a god😍
This happened to me in school,luckily I was in my paint and body shop and me and my best friend tried to figure out what it was all day skipping classes just to figure it out. Just for my teacher to bang the shit out of the steering column and it turns on💀
Exactly what was wrong with mine..I use my spare key and never had a problem since.
..when it doesn't start, do you get a check engine light? My obd code reader read P0345 even after I replaced the sensor
Noticed your check engine light was on. Was that the security system triggering it?
wow nice video
me 350z is doing the same thing ,,but how do i fix it ... thanks
You just saved my life 👌👌
This is so annoying. I’m in the process of a breakup/move and my z keeps doing this 😂
this same thing happens to me but when i clean the maf sensor it starts right up. I also cleaned TB properly and got a new MAF from the dealer ship. Changed spark plugs. About to change fuel pump, crank shaft sensor and put in a new coilpack..
did that work?
WTF THIS WORKED CRAZY 😂
I got a tuned ecu that had nats deleted but the light is still solid red and I told him about it he said that it’ll always be like that but the car is cranking and doing everything that your car did it just doesn’t turn on fully and the light is always solid so I’m pretty sure he just did it wrong
You are correct. I have had the same issues with my 350Z. The work around is what is mentioned in the video. I have also replaced the key immobilizer, it still acts up at times. Its a very frustrating issue. My question: can the key immobilizer be removed?
There is a guys on Instagram that will tune your car and actually disable it!
Unprev will do it for $350
I just left my beautiful chrome wrapped 350Z stranded because it wouldn’t start. If this works in the morning I’LL LOVE YOU
Did it work for u
My key immobilizer doesn't work, I need to try and get this fixed first. Then, if that doesn't work, it could be that I have a dead battery.
Makes sense I have a lock problem....
After hours of trying to get it to start still no luck.
Does your fuel pump turn over with the bad key??
BRO I REPLACE THE CAMS, CRANK, NEW STARTER ALMOST SPENT 1000K AND STILL NOT STARTING JUST CRANKS. BATTERY ABOUT 2 1/2 YEARS OLD, NEW ALTERNATOR UGH. MAN I WANT BEAT MY 350Z WITH A HAMMER OF FRUSTRATION BUT I CAN'T LOL. I SPENT TO MUCH MONEY ON IT AND PUT A LOT OF WORK INTO IT. AND NOW I'M ABOUT TO DROP A NEW FUEL PUMP, IF THIS SH1T DOESN'T START, I DON'T FUKING KNOW.
Men am a having prob. I cant fkn sleep. Terrified dont know wat to do. My 2008 hr starts then dies... Yesterday i had to keep my foot on accelrator if i left a bit car shuts off whats the problem?
I FUCKING LOVE YOU
Mine starts but it wants to turn off while I’m neutral
2004 350z mine turns off while driving. Car stalls and i have to jiggle the key on and off over and over and it starts up and runs fine.
@Cristian Hernandez I am having same problem. Mine just shut off on me. Then would crank but not start. After it cools off a little, it starts fine.
Rob B you found out the cause of this?
@@tofupanda8168 code shows crank sensor.
I love you
What if the light is blinking red
I have the same problem,but it takes to long for the car star,anyone knows how to fix this problem o where i have to take the car for repair that problem?
Mines was my starter..
Bro i just replaced coils spark plugs cams and crank sensors and everything quality too spent a lot of money 😭😭😭😭 I’ll update yall soon
what happened
I was just driving and out of nowhere i lost power and when it slowed down it shut off
@@z33_gary11 dude lmk if u solve it .. exact same shit here.. coils, crank sensor and fuel pump coming in soon. If it stalls again spray the MAF and lmk what happens.. I noticed that each time it happens i just spray the MAF with cleaner and it starts right up. Mind you its a brand new MAF from the dealership because I thought it was the old MAF. It happens when gas tanks around 1/4 and it never fills up past 1/2 tank so maybe fuel pump.. Let me know if you figure it out
@@tonym9369 it did not start bro but i just started working today at a shop so ima bring my car in here tomorrow
@@z33_gary11 word bro lmk
How can i remove that red light it wont go away i did your steps and nothing
same
Same
The people like you are great for lift
But mine wouldn’t crank
This crap just started. Lol. I was going to do the fuel filter first!
What if your car doesn't crank it just sounds like clicking?
Master Bruce
This just happened to me
U mean like nothing at all happens
No start and no crank?
What I’ve been told is it’s the RFID chip in the key
I guess it just means it’s going bad
But make sure the battery terminals and the connections are clean
Maybe that could be the issue also
Hope this helps man
I could not find shit online for the the no start no crank no click issue
@@themechanix2311 it was my battery I had to clean it off. It had me worried but thanks for your response.
My light is not on but it does the exact same thing please help!!!
My 350z has the red light on still need help it cranck but wont start pls help
Jorge Lopez I have the same issue, red light will not come off and will crank but won't start
Nathan Karhu crank pos sensor look it up causes lots of issues on this motor
originally this worked for me but now when I turn my key to the on position, my radiator fans come on full blast and I can't even attempt to crank it because it does nothing. Any idea?
same thing happenes to me did you get yours fixed ?
@ZNightLocker yep I had the NATS deleted from the ECU and then reinstalled and it worked just fine
@@mattnieschwitz4727 did you do it from a tuner ? Or an app cause would like to try that
@@ZNightLocker I had to send it to a tuner because of the software they use to delete NATS.
@@mattnieschwitz4727 thank bro i shall look into it sadly the country i live in dont have tuners that delete it
These cars are becoming scary. Too much malfunctioning electronics. It seems to me the electronics is poorly designed. Check the comments to see all the people with similar problem.
My car die while driving can this still be the keyv
maxmax250 crank or cam sensor.
Mine did that too
Keith Wilson it was the fuel pump fuse the blow in my car
My car died while driving as well. Could it be my fuel pump? Or the key since my red light for security is solid red when trying to turn on.
Daniel Lopez did you figure it out?
my shit won’t even crank
wtf it worked
hold for 6 seconds and hold for 10 seconds