Hi Grimmy Grim, welcome to my channel, you can get those ready made cables.. just read this description below properly ya :) Once again thank you for visiting and your compliment. Converter needed =============== ‣ Lian Li aRGB Cable Kit - lian-li.com/product/argb_cable_kit/ - Lian Li aRGB Cable Kit If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
Lian Li should include that conversion cable in either the strimmer or uni fan kits (preferably both). Since both products are compatible, they should come ready to connect imo.
Hello ByngerX, welcome to my channel. The way I see it, the strimer plus was out before the uni controller. I believe they do see what you have mentioned that why they came out with the argb cable kit. Nevertheless you can try to write in to Lian Li. I doubt they will provide that in any of their future manufacturing of these products. Is all about making profit. Anyway thank you for your feedback.
@@KleoYan I just watched your video today, then i realized the conversion cable is key to connecting two controllers. I believe lian li did this on purpose just for pushing you to buy their cable kit.😂
@@calmdownbigbrother6405 welcome to my channel. thanks for your feedback, to have two controller, you need to have additional usb Hub. the conversion cables are only meant to protect you from daisy chaining so many fans and to plug into your motherboard argb header, which will cause melt downs or even header to blow. you might not believe it.. throughout my aid to those who seek help from me. they have their mishaps. I dont think lian li is forcing you to buy their cable kit. they have thought about safety operations. you can view the dos and donts in this playlist and you will know how much these fans uses as in argb current. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html anyway am not defending lian li. besides them requesting us to get their argb cable kit. It's also for safety operation purposes. If you know what you are doing like I do. It does not stop me from doing my own conversion cables. ua-cam.com/video/Lz90i5ym4Dw/v-deo.html once again thank you for visiting my channel and to provide your valuable feedback. thank you!
@@KleoYanHi, I would like to get some feedback from you. I m building a new pc. the motherboard is z690a. I got 3of 3pin argb on my motherboard. I am trying to use 1 lian li argb controller to connect 6 lian li fans, then this first controller I connected it to 1 of argb 3pin on motherboard, name it #1.The second controller is for rest 3 argb lian li fans, I use it for liquid cooler, use a new controller name it #2, and plug it to another 3pin argb on the motherboard. The last controller is about lian li argb 8pin and 24pin controller, I'm going to plug it on the third argb 3pin on the motherboard name it #3. I use 1 sata power supply to connect #2 and #3 controller. and another sata power supply for #1 controller. is it going to work? any tips or notifications? Thank you.
@@calmdownbigbrother6405 what you have planned out works well. as all your controller are drawing power directly from PSU and to supply the uni controller. so it does work. but on the safe side, check the 12v reel on your PSU. they should have a data sheet to check what kind of ampere it is capable of. A uni controller is about 12.4a (fan and argb load limit) so 3 x uni controller is at 37.2a if your data sheet on PSU of the 12v reel provides above 37.2a (example of a Seasonic GX650) its rated at 54A.. it's more than enough to cater. if it's lesser, then you got to worry about.
Hi Player de la ligue. You are most welcome. Glad to of help. There are other videos I have, based on this uni controller Do browse around ua-cam.com/play/PLEW-b-2vYDdPYyNKmZqrhOH2kEfcRDUno.html , By the way if you like my content, subscribe and click on the notification button. Thank you very much.
lian li 24pin addressable rgb strimmer plus can be connected to the argb in the motherboard instead of the controller? I don't need the excessive cables and controller right?
Hi hd krk, welcome to my channel and you are most welcome. I do have a playlist of using the uni controller on lian li products which might interest you too. ua-cam.com/video/4eT0Qf1znoY/v-deo.html
Hello The Blank, welcome to my channel, the controller of these strimer plus has a cable which allows you to plug it from the controller to your motherboard. then trigger the controller button M (hold it 3 seconds) and you will be able to use your motherboard argb software to control it. If you are asking, can the strimer plus directly connected to the argb header of your mottherboard without the controller. My advise to you is don't do it.. you might overload the motherboard argb header and it might melt.
Best video on these cables. A few downsides to this setup though is the effects are very limited compared to what you get by using the strimer hub itself. Also, the lighting seems to flicker intermittently despite using the official argb cable kit and trying all ports on the unifan hub.. maybe it's just mine though
HI Stillward, welcome to my channel, if you have both the 24pin and dual 8pin, try only the 24pin, see if it still flicker. then swap using only dual 8pin. if either one does not flicker, there are two posibility, 1) you might have use alot of peripheral in your computer which uses sata power source. try reduce the number of peripheral connecting to the sata source. 2) Your hub either 24 or 8 pin socket might be faulty. contact lian li for a replacement hub. so far I have encounter 1), where by multiple pheripheral are connected to one Sata power source. Thing like Sata HHD, other Argb controller and the strimer plus contoller, that caused the flicker. Thank you so much for your compliment and to have visit my channel.
@@love_dva hi, welcome to my channel, hopefully is just a sata connection, if not you might want to contact lian li directly if your strimers are still under warrantly, they will replace it for you. All the best in your build.
@@KleoYan yeah thx, im gona return it since its just came yesterday. My first impresion is 'woow, theres should be nothing wrong in this 50$ cable' First i found error patern, then the controler sometimes do nothing, last its dead. I think its bcoz the controler, like its not even worth 4$. argb header cant even take control of this thing.
Thanks so much for this video buddy, just like Player de la ligue I've been wanting to know the answer to this question for a while. I couldn't believe Lian-Li would release a product where you have to either have the side of your case off to access the controller or find a way to mount it externally which isn't going to look good but this gets round the problem perfectly. I recently built myself a new system using the Corsair QL range with the H150i Elite Capellix, Corsair Vengance Pro Ram and a coupe of strips, the whole set-up was just over 2k and I expected this build to last me the next 10 years like my last i7 build however these new Lian-Li Uni fan range along with the strimer plus cable have really got my appetite going to build another, the design and delivery of the argb on the fans I think are so innovative, and when you consider the ease of connection along with the abily to run up to 12 fans safely then I think it's got to be done, and done within the next 6-12 months just so I can sit, stare, and smile, this time though I'm definitely going for the Lian-Li system along with the Kraken Z73, this system will be White so it should look quite nice when it's done. Thanks again buddy, I have really enjoyed working my way through your videos, new subscriber too..
Hi Chris Harris, welcome to my channel and thank you for the compliment. just to share, I am not sure if you are aware that I do have other videos related to this uni fan series. if you have not, I will like to share it with you too. This is the playlist ua-cam.com/play/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9.html in this list do watch the dos and donts :) I wish you all the very best in your build. once again thank you for your compliment and to have subscribe to my channel.
Hello Emanuel Gjoni, pardon me, I do not have the lian li argb kit but I did my own cable converters and applied the combo of all lian li argb products ua-cam.com/video/njlkdM9lYbI/v-deo.html there are more videos which I did as I did break them down, you might be interested in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html now for lian li cable kit. I did help out some of my viewers which you might be interested with diagrams, refer below MSI with AL - imgur.com/gallery/F0khMEW O11D XL case strip to Strimer plus - imgur.com/gallery/kxd86ob NZXT with AL120 - imgur.com/gallery/rGxCQ87 SL120 with Galahad - imgur.com/gallery/ioHqX0w Original Galahad wiring arrangement - imgur.com/gallery/KzhQOJ9 Lian Li aRGB Cable kit demo - imgur.com/gallery/beYR8CN Corsair H100i Elite Capellix to Uni controller - imgur.com/gallery/Rtg5ff6 Argb Cable Kit with Galahad and Strimers - imgur.com/gallery/ErMZdQh
@@KleoYan man you are so kind. Thank you for sharing that. I did have the strimer plus 2 of them, 9 uni fans, the Gallahad I just went straight to motherboard as I was worried about overloading. It seemed to work except my strimer plus gpu had one led not lit. This made me worried about too much amps. So I removed the strimers and just hooked up the 240, 4 group of fans to the uni
@@mannyfresh7065 I see, as for overloading, I will not overload so long your strimer plus are connected to it's controller as there is a power source (Sata) to the strimer plus controller, then from the controller to the uni controller. It will be fine, so lone as it's plug individually to 1 of the output in the uni controller. Though you this diagram is of total 7 fans but it's still applicable in your case imgur.com/gallery/beYR8CN, if you have any questions, do let me know and I will try to aid you out.
Hi Adam, welcome to my channel and thank you for the compliments, infact I've done a series of video on this uni fans which you might be interested ua-cam.com/play/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9.html , once again thank you for visiting and to have subscribe to my channel.
great video, im subscribed !! question for you: what else could i use the strimer cable for in my new build chassis instead of putting it on the GPU cable. i have the lian li strimer 24 and would like to find a good place in the chassis (Lian Li EVO) to put it. i think it would be cool to put it somewhere but where I don't know, my current white ANTECH cables look so good (16 AWG) that I don't want to ruin the effect of those cables. HELP
hello dabney offermein, welcome to my channel, it greatly depends on your creativity and you might just wait for the strimer plus V2 which will be out or should I say release in one day's time. the L-connect 3 is pretty awesome .. lian-li.com/l-connect-3-beta-program/
Hello rafuxxxxx, welcome to my channel, you are most welcome. am glad my content did aid you.. infact I have done a series of video about this uni controller which you might be interested. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
Hi Geeky Stuff, welcome to my channel and you are most welcome, btw I did a series of content about these uni controllers which you might be interested ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html . there are also dos and donts about this unit too. once again thank you for have visited my channel and all the best in your build 👍
Thank you for explaining this very well. The thing I am unsure of is where to connect the 3pin bypass cable on my motherboard? is it on the 5v add gen 2 connector?
Hello mr_narto, welcome to my channel, if you are talking about the 3pin argb connector from your uni controller to the motherboard, yes, connect that to your motherboard 3pin 5v argb connector.. make sure is 3pin and not 4pin..
This is literally the perfect solution I was trying to look for. Control by PC software without affecting other RGB fans I have in the PC build. 9:20 - Where I can buy this device? I couldn't find it on Lian Li's website.
Great video! Question for you though if you can please help me out. I already have the 24pin and triple 8pin Strimer Plus's, and have 10 sl120 fans on the way. Would it help me out rgb power wise if I use 1 hub for all the 10 fans, and then another hub to run to just the Strimmer Plus's. I've seen a few posts around the web about rgb flicker due to power so my thought is using one of the extra hubs would fix.
Hi Nucl3ar, welcome to my channel. Flickering can be the cause of either unclean power going to your system. I would narrow down equipment separately. First is to test out your 10 x SL120 fans with the uni controller, next will be test only the strimmer plus controller itself without the fans on. if both works then this tells you that that your lian li equipment is not at fault. Next connect both to see if it flickers. if it does, reduce some fan set from the uni controller. If the flicker stops. it means that your PSU unable to provide sufficient power to carter the lian li controllers you are using. Just a question, your uni controller and the strimer plus controller, are the using the same sata reel from your PSU? if they are, try separate reel. you see even if you have an additional hub, if your PSU is not able to cater the load. it's pointless. so hope you will do some basic troubleshooting first before hooking up another uni controller.
First of all thank you for all the good videos! Second of all. I connected the Strimer Controller to uni fan sl Controller successfully. However if I press and hold m1 the strimer turns off. If I start using L connect 2 the strimer won’t react to anything. Any recommendations? Unifan is working fine. I already tried to use channel 3 or 4. Also I turned of my computer once and unplugged the PSU.
hello EpicBluePixel, welcome to my channel, I only try this strimer plus on the orignal SL uni controller with L-Connect and I am not able to try it on a L-Connect 2, as the strimer plus, I have returned to the owner. You might want to ask your questions over here www.reddit.com/r/lianli/
Thanks a lot for the tutorial and explanation. Just curious, given the way Strimer Plus's RGB header can be connected to the Unifan controller as demonstrated, can other RGB devices with 5v rgb header be connected to the controller, and controlled by L-connect, too? If this can be done then it'll be awesome. Right now I have some RGB devices connected to my MSI motherboard's RGB header but MSI's software is a disaster in terms of lighting effects.
Hi w00tilicious, welcome to my channel. You can but take note on the ampere load which plugs to each output of the uni controller and converters are needed. For each output the ampere limit is around 2.6a load. So any argb which u plug in to any of the output below 2.6a load will be fine.
Hi Kevin Corrigan, thank you for the feedback. it's ok, I am keeping my channel just to share experience and as a hobby :P, nevertheless thank you for your compliment and to have visit my channel.
Great video. Question, do you think it’s preferable to have them controlled by motherboard or by the switch? I haven’t played with it too much yet but figured I didn’t want to keep opening my case to change effects so maybe motherboard is easier. Controller effects seem really cool though. I don’t know what type of effects my pc offers yet though as I just finished the build and haven’t hooked it to a monitor yet.
Hi DrGameStar, welcome to my channel. I would prefer to use the strimers controller to do that as it has some patterns which the motherboard argb utility does not have, unless you make use of 3rd party application like the SignalRGB www.signalrgb.com/ (I believe you need to pay)
Great video! Thank you. You mentioned a third cable that goes into the controller for use with the Lian Li Dynamic cases. I have an XL and cannot find out how to take advantage of that third cable. Any suggestions?
Hello Edgar E, welcome to my channel and yes I did mentioned that. you might want to see this diagram, infact it's all written on your case and strimer plus manual. imgur.com/gallery/kxd86ob
Thank you for the video! Can I get that single argb cable you hold up at 9:04 somewhere? Or do I have to buy the whole argb cable kit? Also, if I'm using strimer pluses and uni fans, can I plug the strimer pluses into my Mobo directly, the uni fans into the controller and then into the motherboard, and control it all through L Connect? Thanks again!
Hello Javi Martinez, welcome to my channel you can get just the cable but you will need some needle connectors. here is what you need. Converter needed =============== ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html and as for your next question. if you want to use the motherboard application, you will need to plus the argb cable between the strimer plus controller and to your motherboard argb header. same goes to your uni controller. this way you can control both controllers using your motherboard application.
Hey thanks for the video. I have a question aboout at minute 10:00 . What if 1,2,3,4 of the bigger cable input thingies are used. Can you still use converter thing Y Splitter cable for it to work? I have the SL Inf UNI Hub with i think 2 of the Y Splitter thingies and one is used for my AIO Pump Fans.
Hi Alexandar16, welcome to my channel. if you are asking can you use a splitter at 10:00 to connect your old strimer plus to the SL Inf uni hub. yes you can.. by use the converter, you can plus to either sync 2 or sync 4 port on the SL Inif uni hub.
Thanks for the informative video. So, how you can connect 24-pin strimer plus to the A-RGB 3-pin splitter (for example, of DeepCool case's), not directly to the motherboard? Is is possible without problems?
Hi Kakha Khmelidze, welcome to my channel. May I ask which DeepCool case are those. I can do a quick check if it's possible to connect the strimmer plus controller to the case argb controller. thank you!
@@KleoYan Sorry for late reply. Case is MATREXX 70 ADD-RGB 3F. I just need to know, if I can connect this to the DeepCool A-RGB splitter. I have biunch of A-RGB fans and my motherboard have 2x A-RGB (3-pin) header. SO I have two bunch of A-RGB fans for those two A-RGB headers. I just need to know, may I connect this LIan Li STrimer PLus to my A-RGB case splitter and use it synced with my other A-RGB fans?
@@kakhak hi, welcome back. as to answer your question, you have to connect the stimers to it's own contoller first as make sure the Sata cable from PSU to this controller is connected, then connect the argb connector from this controller to your case argb controller. not an issue. you will also need to set motherboard mode in the strimer controller by pressy the M button for 3 seconds.
@@KleoYan Hello,, my case has only splitter cable, it does not hav E a controller. My mobo has two ARGB header and I can't connect this Lian Li strimer directly to than on of the motherboard headers, because it is already occupied. I need to know, may I connect this strimmer to cable splitter together with another ARGB fans? By the way, as I know, this strimer comes with cable which can be used to connect strimer to MB without its own controller. Will be great if there is possibility to connect striner without any controller directly to the case ARGB cable splitter. This splitter then connects to the motherboard ARGB header.
@@kakhak my bad, I read too fast on this manual and assume there is a controller build in your case. www.deepcool.com/download/pdf/MATREXX_70_3F_Installation%20Guide_En.pdf if that's the case. I would advise you to get a argb controller for your fans. it's not wise to daisy chain all argb connection and connect to the motherboard. it might overload. if you really wanted to connect all to your motherboard argb header, read the manual and see what is the max limit load it can take. also calculate those fans LED load. not the fan load. total them up and see if your motherboard argb header can take it.
Great video! Only issue is that the cable kits aren't really available in the US and if they are they are price gouged. All I need is the converter cable from the Strimer based to the Fan Base. It looks like a $1 cable and I really don't want to pay $150 for it. Problem is I can't find the name of the 3 pin female connector that plugs into the fan base unit. I can extend it or even make the cable myself but I can't find it! Do you know what the name of that 3 pin female cable that has the little clips on the side? 3Pin 5V to 3Pin (4 Position) ARBG female header? Thanks
Hi Kilgoran, welcome to my channel and yes then cable kit is a bummer to me as I can’t get it anywhere either. So I did my own crimping which is not difficult 😁 ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
@@charlesbergenske6580 to be honest, the Strimer controller itself, some of the effects you can't get it on the uni controller. So it greatly depends what your liking is... maybe test both out to see which you like most then stick with it.. Cheers!
This helped out so much fixed my issue of me not understanding the product fully I thought I needed to have more cables then just the sata power for rgb controller affects to work! Thank you so much! Also Ik you put a lot of time into these I was wondering if you heard any about connecting a razer o11 dynamic to a uni hub/ anything in L connect because I use razer synapses rn for my light strips on the case itself:)
HI Ghostly, not that I know of. do pardon me to have the lack of knowledge on this. Will try to do some research about it. Will update you once I found out anything.. or you might want to ask a bigger crowd here www.reddit.com/r/lianli/ . hope this help.
I notice you mentioned you have to purchase the argb cable kit to get that cable in order to connect. It's about 20 USD where I am, was wondering if you think it would be a cheaper option (7 USD) to buy a ARGB 1 to 5 splitter cable and plugging the fan controller into 1 and the strimer controller into the other? Would that still allow to sync since they are both connected to the MOBO through the ARGB header
Hi Tim Chan. Welcome to my channel. It will be good if you can list down what device are you connecting to. Example fans to the uni controller or motherboard argb header? In general there is argb load limit on hub/controller.
@@KleoYan ASUS TUF B460M Plus. I'm just trying to think if there's any other way to sync the cables with the fans apart from buying the cable kit? I guess there is a argb load but the reviews on those Cooler Master 1 to 5 ARGB splitters seem ok
@@TimTakeAway Hi ya, is not able the cable is about the headers you going to plug to. based on your Asus Tuf B460 Plus dlcdnets.asus.com/pub/ASUS/mb/LGA1200/TUF_GAMING_B460-PLUS/E16866_TUF_GAMING_B460-PLUS_UM_V2_WEB.pdf there is only one RGB 12volts header on the motherboard, it's not compatible with any aRGB 5volts fan or strips if you want to connect it directly to the motherboard header. If you are only connecting to your Lian Li Strimers, you got no choice but to use it's own controller. and if you are trying to plug any argb Fans, you will need a contoller. I assume you are using the SL120 Uni fans. overall your board does not support aRGB functions. therefore you need a aRGB controller, as I have mentioned to you, kindly list down all your aRGB components that you will be using, if not I am not able to explain fully to you. Example what fans and model are you using besides this Strimer Plus?
@@KleoYan I believe you linked a different motherboard, mine is www.asus.com/Motherboards-Components/Motherboards/All-series/TUF-GAMING-B460M-PLUS/ which has one argb header on it. my question was whether i can connect the unifan controller and the strimer to shopee.com.my/Cooler-Master-Universal-ADDRESSABLE-RGB-1-to-5-Splitter-Cable-1-TO-5-ARGB-Fan-Cable-i.27709151.4868367303 and be able to have mobo control with this method
I nevver understood that such a premium product is made with a manual controller and not, say usb controller so it can be fully controlled by software from the beginning. But can the uni fan controller make all the exact same modes as the manual controller can?
Hi M. Colby, welcome to my channel. The uni fans have too high Arab drawn current. It will not work even if you find a way to connect them to this v1 controller. Now as for the strimer plus to have it control via USB. You can purchase for v2 controller. ua-cam.com/video/uWNZO2HVgxE/v-deo.html
Hi Corndog, welcome to my channel and you are most welcome. By the way I have done up a series of this uni controller which you might be interested ua-cam.com/play/PLEW-b-2vYDdPYyNKmZqrhOH2kEfcRDUno.html once again thank you 😊
Hi Khairil Nazmi, welcome to my channel, nope, it will not sync, strimers does not need L-Connect app to do argb effects unless you are talking about connecting it to the uni controller. you can then connect the argb cable which is suppose to plug from the uni controller to the motherboard, you connect it to your asus or Nzxt cam. then on your uni controller select to motherboard mode, then make use of your nzxt cam or asus to control the argb effects. if you are talking only the strimers controller, yes you can, just plug the argb between the strimer controller to your motherboard header or to your asus or nxzt controller to controll the effect. but you will need to press on the M button for 3 seconds to set it to motherboard mode.
Hey man thanks for the info on the commander pro - just another quick one; on the “unifan” how many RGB connectors are there? I want to power the 8+24 pin as well as 3 other lian Li RGB fans (AL120) Do I need to buy a “daisy chain” for my fans to connect into the one port or are there enough on the unifan ??
hi dbwarzone, I hope I understand your question correctly. The fans itself interconnect and they do come with 3 connectors as there are three fans in a set unit. AL or SL, both the same, no diff. and the uni controller do have a argb connector to the motherboard, so instead of plugging in to the motherboard, you can plug to your NZXT kraken controller.
Hey, I love your videos man. Great way of explaining everything. I got the Lian Li O11 Dynamic XL case, Lian Li Glahad 360, Strimmer Plus 24 Pin and then I have 7 x Lian Li SL120 Uni Fans (They came with 2 x Fan Controllers). My motherboard only has 2 aRGB headers and I cannot get all RGB's working since I never got the Lian Li Cable Kit you recommend. Is there any other options for me, I want to use my motherboard to control RGB's. In one of your videos, you mentioned connecting the Strimmer Plus directly to a Lian Li case? Is there a work around at all here?
Hi Zursen, welcome to my channel. Just for your info, you can currently use one uni controller till lian li will announce at their website, as when they going to release an update version of L-Connect, so that you can use two. now I do have another video which might aid you on the connection. ua-cam.com/video/njlkdM9lYbI/v-deo.html but do note that I am only using the uni controller. if you want to use your motherboard to control, all you need is just to connect the argb cable from the uni controller to the motherboard argb header. Just make sure you L-Connect is set to motherboard mode. Same applies to the fan rpm. now for the lian li argb kit, me too not able to get it in my country and ordering from overseas is expensive. therefore I choose to crimp my own and here is how ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
Hi Hasrul Nizar, welcome to my channel. if you plug 8pin to the motherboard, you will need to use your motherboard argb to controller the argb effects. btw when you've mentioned customized argb. what type of customisation are you referring to?
@@kmdrenz1444 oh my bad. Now understood. Nope, without the controller you can’t do the 18 effects. Only the simple ones from your motherboard application if you connect the 8pin directly to the motherboard argb header
hi Zac Tan, welcome to my channel. If you did get the Strimer Plus and Uni SL120 fans, all parts are included in this video except for the 3pin argb to a 3pin JST 03 male converter, which I crimp myself here. ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
Hello amin mujkic, welcome to my channel. this video migth be able to aid you ua-cam.com/video/njlkdM9lYbI/v-deo.html and this diagram is an illustration on how to make use of the lian li argb kit. imgur.com/gallery/beYR8CN
Hello Levi, welcome to my channel. This illustration is just to show you how to connect the strimer plus to the uni controller. as what you are purchasing is up to you.
His desmond, welcome to my channel and there are other videos related to this uni controller which might interest you ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html once again thank you to have visit my channel 👍
Hi bro! Awesome video on how to. But 1 question, i'm having a hard time sourcing out the conversion cable. Any idea where i can score one? Instead of the Lian Li one.
Hello Ramil Zain, welcome to my channel. you can use this.. choose orange www.ebay.com/itm/265640026415 and you might need the needle pin too but you will need to pull one out as i can only find the 4pin and not 3pin www.ebay.com/itm/133188634508 or alternatively you can wait for the Strimer plus V2 controller which will be out soon and here is how it looks like with the L-Connect 3 app. ua-cam.com/video/J76Zyd1GzNA/v-deo.html
@@ramilzain4616 you are most welcome and please do not daisy chain too much as there is a load limit on the controller. Do watch the dos and donts of the uni controller in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
@@KleoYan Thanks for the advice bro. Btw, any idea to actually to connect both strimer and unifans to a razer chroma argb controller? I've so lost for weeks. Thanks in advance!
@@ramilzain4616 based on the chroma controller, If you have already plug the strimer plus to the uni controller, the uni controller has a argb from the controller to your motherboard, instead of plugging to the motherboard, you plug to your chroma controller. you will need to set in L-Connect to motherboard mode, then you can use the chroma to control the argb. but having to say this, kindly make sure your chroma is able to handle the argb load. I wont be responsible if anything goes wrong as I have not tried on the actual chroma controller.
Great video! btw I have a question regarding the Lian Li Uni fan controller. My setup has 24pin cpu Strimer and gpu 3x8pin Strimer with 8 unifans for case fan. All the ARGB socket on Unifan controller are already occupied, do you think I can make use of a ARGB splitter to connect my Strimmer Plus controller to uni fan controller? Right now my Strimer cables can only be controlled separately by its controller. I want it to be connected to Unifan controller so I can sync the lights.
@@KleoYan my case is Lian Li Lancool II Mesh. Front 3x fan, top radiator 2x fan, back exhaust 1x fan, and bottom of GPU 2x fan which total of 8 fans. 2x Strimer cables that runs independently. If possible I want it connected to Unifan controller using argb jst cable splitter
@@PrimeSlime hi ya, thank you for your reply. This will be ideal On the uni controller Output 1 - front 3 fans Output 2 - bottom 2 fans + rear 1 fan (to use fan argb JST connector) Output 3 - top 2 fans Output 4 - to your strimer plus controller and remember to set it to Motherboard mode. That’s how i will do it so that your unifans are with similar argb load or less.
@@KleoYan Thanks for your response. I will try to use your recommendation. Your videos are very well made. Direct to the point and explained very well. I'm so glad that I found your channel. It's a huge help for me. Thank you very much!
Awesome video man. I just want to ask how to config the strimer plus controller and uni fan controler in order to use 10 SL120 fans + 24-pin Strimer Plus + 8-pin Strimer?
Thank you for this very informative video. For the 8+8 pin strimer plus, will it still work on a gpu with only a 6 pin connector? My gpu has a space where I can just tuck in the extra plugs but I don't know if the lighting will work
Hi Tyler King, welcome to my channel and thank you for the compliment. Btw I have done a few series with the uni controller which you might be interested. do take note of the dos and donts and is listed in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
@@KleoYan I used your guide about 6 months ago to get my unifan and AIO going! Just added the strimers to my PC today and used this guide! You've been a great help. The PC looks great!
Thank you I was struggling, thx to you a working great. I did notice the new 3x8 in purple, which is my build colour is not as vibrant as the old 24 pin.. Thanks for making this.
Hi Darren Davies, welcome to my channel and thank you for the compliment. Yup I did notice that too, the problem is, the longer your argb strips are. The color will dim down as not enough ampere to provide the 3rd 8 pin strip. That’s why it draws and share with 3 8pin strips. Hopefully Lian li will come out with a rev 2 of the controller to supply more ampere or current.
Hi Dragonling, welcome to my channel, with the strimer plus controller, I dont think this can be done, you can try geting the V2 strimer plus controller and to make use of L-Connect 3 and these are the effects ua-cam.com/video/J76Zyd1GzNA/v-deo.html and the actual product of the V2 controller. ua-cam.com/video/uWNZO2HVgxE/v-deo.html
hello brother, so I bought the strimer 24 and the strimer 8 pin, I can also connect them directly to the motherboard without connecting the transformer for the fans, does it work the same or do I have to take it?
Hello Simone Gadaleta, welcome to my channel. You can just plug directly to your motherboard argb header (5v) from the strimer plus controller no issues. the Uni controller is if you intend to get SL or AL uni fans which controls by the uni controller. you can ignore the argb converter. that's not necessary.
This is such a good video. I only have 1 rgb header on my MOBO so it’s important that I use the provided controller. Just wanted me question, how do you turn on the cables once connected?
Good day Rashed Zaman and welcome to my channel. when you use the provided controller. your controller is connected via the PSU Sata cable which provides the power. once you power on, your strimer plus will light up automatically. one thing though, since your controller is inside you case. you will need to preset what pattern or color you want then everytime you turn your pc on, it will be that pattern and color.
It doesn't made sense tho as to why Lian Li Strimmer doesnt come with a remote for their Strimmer Hub. That way you can leave the HUB inside the PC and control it with remote/Software. The Hub has a lot more options when it comes to effects compared to software.
Hello David P. welcome to my channel. I do agreed what you have said. maybe post your question at their reddit and to suggest. It might help. www.reddit.com/r/lianli/
Hi, how would I connect or sync everything my motherboard? Here some parts I have: Lian Li Uni Fans 3x 120mm / 5x 140mm & Lian Li 24 pin Strimer and 8 pin Strimer. Case: Cooler Master C700P Black Edition & Motherboard : Asus Rog Maximus XII Formula. My case has RGB, so how can I connect my Case RGB directly to my motherboard or can I connect it to my uni controller? Thanks for your helpful videos.
Hi Johnathan, for connection wise. this is how you can follow, you will need to work around as ilustrated. ua-cam.com/video/njlkdM9lYbI/v-deo.html and as for using your motherboard to control the argb, this will give you a better understanding. ua-cam.com/video/Rm2emeyMUAk/v-deo.html
Hi hary, welcome to my channel. there is a combo purchase or individual purchase. it depends what you are getting. if you getting the combo which is the 24pin and the 8pin, it comes with the strimer controller. if you get the 8pin, you dont get the controller and if you get the 24pin, it comes with controller.
Hello tenzin044, welcome to my channel, as illustrated in this video, the strimer plus has it's own controller and you can set bypass to motherboard mode. There is this cable before I show you the coverter to plug to the uni controller, you can don't use that coverter connector, just plug the standard argb connector to your Corsair hub, that should work. Just make sure that the strimer plus controller is powered by the sata source of your PSU and make sure to set it to bypass to motherboard mode by pressing the mode button for 3 seconds.
Ty so much for your videos. I have a question. I can have 24 pin and triple 8 pin streamers along with 10 fans SL fans connected with the argb kit into the hub with no issues correct?
Hi 2NA, welcome to my channel, nope no issues, infact I have a series of videos on the uni fans and it's controller, which you might be interested, playlist here :) ua-cam.com/play/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9.html and do watch the dos and donts (important) also the Mega Combo. If you are using the lian li aRGB kit, this diagram might aid you in some ways imgur.com/gallery/beYR8CN
I have that thing for over a year now and you are telling me I can bypass the controller just by pressing one buttom for 3sec? Was looking for that for so long.
Hi Jetto Bazzokah!, welcome to my channel. yup you can by pass it and use your motherboard argb software to contol the argb effects. all the best and have fun.
Hey, Great video, I only bought the 8 pin cable for my gpu, can I plug these directly into the motherboard without the uni controller, I have one 12v JRGB controller on my msi b450m pro vdh max. As far as I understand the fan headers output 12 volts and the strimer only uses 5. I’m really confused on how to use only the 8 pin gpu cable without the uni controller.
Hello Pro Max, welcome to my channel, after taking a look at your motherboard chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/viewer.html?pdfurl=https%3A%2F%2Fdownload.msi.com%2Farchive%2Fmnu_exe%2Fmb%2FM7A38v8.1.pdf&clen=9338230&chunk=true , you cannot use that to connect to your strimers. that is not for aRGB is for RGB. Strimers are aRGB which is addressable rgb that runs on 5v . do not connect that to your JRGB which is 12volts.. anyway you cant as it's four pin. argbs are 3pin. I am afraid you will need to get a argb controller for that.
@@KleoYan Thanks for your answer! So should i just buy the 24 pin one as well for the motherboard and use that controller. I guess that’s the easiest option
Hello Harold Molina, welcome to my channel. Yes you can plug the strimer plus v1 to the strimer plus v2 controller ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html in the playlist click on L-connect 3 (strimer plus) or another which is the strimer plus v2. As for the SL infinity controller, you can plug but have to use the strimer plus v1 controller and to purchase the argb kit, but you can’t set the effects listed in L-Connect 3. I would advise you to get the strimer plus v2 set or if you have the strimer plus v1. Just get the v2 controller.
@@KleoYan mine weather is normally wet and rainy. -2C here today but dry and OK. I am considering upgrading my PC and buying the Lian Li Lancool III A-RGB case, I found your video description very helpful.
@@pete9b I see, wow.. cool weather. Hey thanks for the feedback. Yup, I am trying to do content which is based as a PC Builder more than a reviewer. As often, lots of details we wanted to know is often not mention.. Lian Li Lancool III case is beefy and has lots of function and all the best with your build too. hope you will like the case like I do.
So If I watch to controller it with the software I just need to conect it to the 5v ARB on the motherborad. Soni don't need any other other 3 way to conect it meaning psu or sata,micron b usb way? Thanks
Hello Dead Angel, welcome to my channel, if you do have a uni fan controller. Yes you can do that by using L-Connect 3 app. If you do not have that, then your only option is to connect the strimer plus argb cable directly to your motherboard argb header and to use your motherboard utility to control the argb effects. Make sure you press and hold the M button for 3seconds to bypass and to use motherboard mode.
Hi Mike B, welcome to my channel. this might help but you need to search for the needle as I am not sure if it does come with the needle for the standard ARGB connector. btw please note there is a load limit on these uni hub/controller. www.ebay.com/itm/265640026415?hash=item3dd961212f:g:94gAAOSwi7piVO2b
I bought the convertor like you suggested. My strimmers are now in sync with my 9 uni fans and can control it via Lconnect. But since the argb is connected to the hub I can no longer control and sync everything via armory crate. Is there a way to get all fans and strimmers to sync with alru chat on top of being able to control all fans and strimmers via LC?
Hello Ed Mina, welcome to my channel. if you have connected all the lian li argb products and to be controller by L-connect, you can always switch to motherboard mode on L-Connect. this till take instructions from your motherboard argb app (Amour Crate). you have to make sure that your argb cable is connected between the uni controller and the motherboard argb header.
Hi, great video for references. Btw, im trying to sync strimer plus 24pin and unifans like you just show in the video. However ive tried by using the unifan given splitter (2 male, 1 female), connecting it between both of the controller argb input and plugging on the female into mobo. However, it seems that my method is not work as it is only change the colour of the unifans only..Is my method is unapplicable??
Hi Ahmad Raidi, welcome to my channel, the splitter you are referring I believe is the standard argb connector. That will not work, you need to plug the strimer plus standard argb connector to the Uni controller. maybe this will aid you ua-cam.com/video/njlkdM9lYbI/v-deo.html
Hi JR516, welcome to my channel. The best way is to purchase the Lian-Li Strimer L-Connect 3 Controller which you can use your V1 strimer plus. www.aliexpress.com/item/1005004239607087.html
Hello Sultan Al-qalisee, welcome to my channel. As per your request, do pardon me as I am not well verse in that field, you might want to search for arduino www.arduino.cc/ and to find out what are the wire connection point to the ardunio device. once again thank you for your visit and to leave your valuable feedback.
Hi, sorry, I have a question. For the bypass, whenever I turn on the PC I must press the m1 button or it has some type of memory and remains in bypass mode
Hi Miguel Angel Valencia, in the past when I use these strimer plus, so long you did not unplug the PSU ac cable and just off your pc. When you turn it back on. The setting stays as bypass.
Hello Johnomar21_x, welcome to my channel. here you go .. infact its in my description. Converter needed =============== ‣ Lian Li aRGB Cable Kit - lian-li.com/product/argb_cable_kit/ - Lian Li aRGB Cable Kit An illustration of Lian Li aRGB Cable Kit - imgur.com/gallery/beYR8CN If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
Hi, regarding your comment at 1:20 where the 3rd cable can attach to the 011D case - where does the end of that cable attach to in the case? I have the Strimer + 24 pin and a 011D case and I wanted to control the animation externally somehow as the hub is stuck inside the case. I am connecting the aRGB directly to the motherboard.
hi roadster38. on the O11D XL case that is. the control unit at the bottom (near the cover shroud), there should be a cable that allows you to connect to the motherboard, use that and connect it to the third plug of your strimer controller. I wish I still have this strimer plus that I can show you through a video but I have returned it to the owner. so sorry about it. anyway for more information on this. you can either go to lian li official website under support FAQ or to their official UA-cam channel to look for info.
Hi Anthony Saclisi, welcome to my channel, so long your triple 8pin is connected to the strimer plus controller, you can connect to the uni fan with the cable convertor. no issue, as the argb load draws is from your strimer plus controller and not from the uni fan controller.
Hello Mohd Faez Saili, welcome to my channel. pardon me if you burn your uni. did you plug the strimers and daisy chained together with the AL fans? if you did, that might be the cause of it.
@@bos0u the issue is over loaded. you might want to know the dos and donts of the uni controller ua-cam.com/video/QQHJUQvKwlY/v-deo.html then try to only plug strimers plus in to a outpout and not join together wiith the AL fans. excample like this will be safe imgur.com/gallery/beYR8CN
Hello Jacob Somers, welcome to my channel. you will need to plug the strimer plus to it's controller to work, as for the uni fan controller, you dont have to plug that useless you want it to control your strimer plus with the L-Connect software.
hi. hope this vid still active. i have a question before i purchase the connector bypassing the other controller, i have 2 controllers, 1 for 120 fans controller and 1 strimers controller. the question is if i can still bypass the other controller to control both strimers and fans. as of now i cant control the strimers. please reply to this. ty
Hi Jm Ocampo, welcome to my channel. If you can control both your uni fan and strimer plus via L-Connect 3. on L-Connect 3, you can by pass and set sync to motherboard, where that is the bypass. lian-li.com/l-connect3/l-connect3-manual-2/ look under quick sync lightings, where it says MB Lighting Sync (enable / disable)
@@KleoYan no, i can see in my device manager.. im thinking if i can ung the connector like in your vid that i can bypass one of the controller which my L-Connect detect in my device manager. do you think thats possible? i have SL-infinity and Strimers controller
Is it possible to connect Lian Li Strimer cable (not the plus version) with AL Unit fans connector ? I am not getting any reference for it... Just got the info that I need to purchase ARGB cable kit.
Hello Manjeet Singh, as what you have seen in this video, the SL and AL controller have the same layout, you can use this video as a reference and to plug your strimer plus to the AL controller, alternatively, you can also purchase a Strimer plus V2 controller only and it will work with your current Strimer plus stripe too. However if you do that, you will need to use L-Connect 3 application which will also work with the AL Controller.
Hi bro, i watch that part of your vid many times. The cable that is needed to connect to unifan controller. Its a male 5v 3pin to female sm3p correct? The links u put seem to be female 5v 3pin to female sm3p. I wonder sim lim sells it? Cant find it online.
hi J T, welcome to my channel, yup you are right but some of those cables bought online will give you the pins, so it will become male instead of female. SLS does not sell them, unless you crimp them yourself, you will be able to find parts at sim lim tower. Normally I crimp my own cables for neater cable management :) ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
@@KleoYan I have a single 8 pin gpu and I'd like to use the lian li strimer plus. Is there some way to separate the double 8 pin and only use 1 part of it?
@@florko1931 Hi, I have returned this strimer plus but I believe the actual cable the provides the current. You can remove them from the underside. It goes like this 2 wires before the arbs strip. You can try removing the wires that are right below the argb strips. Please do them gently and not damage the argb strip. Or you can just leave it unplug. Just use one set to plug it in. The other set, just tug it or hide it somewhere. Hope this helps.
so i bought a 3 pack of 120s SL-infinity fans, 2x 140 sl-infinity fans, one 24 pin strimer and one 12vhpwr strimer. I saw the multiple controllers and freaked out lol. so i need to get the converter, from 3pin argb to 3 pin "fan header" to plug the strimer control box into the fan hub? does that sound right?
Hello lycanwarlord, welcome to my channel, I like to check, is your 24pin strimer plus v1 or v2? if it's v2, you should not be following this content, kindly watch this video ua-cam.com/video/CgvuUFeff8U/v-deo.html
Hi Cedric, welcome to my channel. I will try to do that if I am able to borrow the commander pro from friends.. No promises though. Once again thank you for requesting and two have visit my channel..
@@KleoYan thank it would nice to see because apparently there is a big thing on redit on how the incue commander pro give better gradients and color over l control.
@@CedricMelbourne I see, still I will have to see if my friends have this unit. hope for your kind understand as this channel is mainly for what I have and what I can share. It's not a sponsored channel nor monetized channel. having to said this, There is someone who have discuss this with me me but he is using Razer Chroma. After some short discussion. He figured his way out and it works for him. Maybe you can take his work as a reference and to apply on icue, but please do it with caution. imgur.com/a/pAciXpg credits to INFERNOdll ua-cam.com/users/ProphetHD1337
I have a striker but they are both the same size and can only fit one of the cords into the control box. How do I do both so I don’t have to have one in MB and other in control?
I want to make my own adapter but cant seem to find out what each wire is all i know is one wire has a segmented grey line running along it. what wires do i connect?
Hello XL-Combo, welcome to my channel. infact what you need to know is what are the wires for. You come to the right place.. this might help you out :) ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
Hi J J, pardon me, I have returned the strimer plus to the owner of KritcalGaming93, not able to answer you that, but, you don't really have to plug all 2 x 8pin. just plug one 8pin and leave the other at the side. the whole dual 8pin strip will look nicer, I mean this is my opinion cos 8pin is abit too thin. Anyway the choice is yours.
Hello Ef_Maniac, welcome to my channel and thank you to have subscribe, I have done a couple of content with these set of uni fans which you might be interested. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
Hello Cristian Herrera, welcome to my channel. you mean slice one of the argb daisy chain connector and to replace it with a standard 3pin argb connector. if that's what you are asking, yes. so long you know which is 5v , data in/out and ground.
@@cristianherrera3913 hi, am so sorry, thought am familiar with the lian li argb products, I have returned the strimmer plus to the owner and as for the uni fans and controller. I do not have any with me either. most of my videos you seen here are all borrowed equipment if not returned equipment. You might be interested in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html the concept of slicing argb cable is the same method as how I did the white convertor ua-cam.com/video/Lz90i5ym4Dw/v-deo.html and again. please know the limits of the argb if not you might fry your board or even the controllers.
Hello Danilo Apostol, welcome to my channel. that convertor does not come with it. I did it myself (refer to "Lian Li Uni Fan Controller- Custom Crimp Connectors" of this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html) or you can buy the lian li argb cable kit.
@@miu-choi hi welcome to my channel and yes you are right but if you have these older version strimer plus, you can still purchase a strimer plus v2 controller which allows you to plug the older version strimer plus. This will allow you to make use of the L-Connect 3 app.
I have two graphics cards, so I bought one 24 pin Strimmer and two GPU Strimmers. I only have one Strimmer controller that came with the 24 pin cable. How do I get both of the GPU cables to work? Am I going to need to purchase an additional Strimmer controller?
Hello Zachary McGrew, welcome to my channel. I believe your 8pin argb can be connected to the strimer plus controller. there should be a socket for it. if it's clear, take a picture of your controller with the sockets and sent it to me at godzyla@gmail.com . I will be able to indentify for you. also take picture of your 8pin GPU connectors.
been wanting to get this .. i have all my fans led connected to my ARB motherboard so ive been wanting to use the actual control box itself. my question is. im running a white build. does the controller have the color mode "WHITE" ? bcoz im runnig on white LED on my argb fans which is controlled by the motherboard
Hi Jk Heart, welcome to my channel. If you are talking about the strimmer plus controller, yes you will be able to set it white no issue but it’s only mean for strimmer plus only. If you intent to connect to your fans and I have no idea Which fans you are using, you will need the uni controller. Btw what fans are you using?
@@KleoYan you have answered my question ., sorry english bad :P haha .. all i wanted to see if there is a white color mode on the strimer plus. thank you
Hi Bazil Salihin, welcome to my channel, do a search with "argb 3pin Male to 5v JST SM3P" www.ebay.com/itm/133521646617?hash=item1f1682a419:g:nnUAAOSwB~BfYx4O
After I have applied this instruction 8:05 and use the motherboard RGB header my controller Burnt 💔💔💔 , everything I have applied as per your instructions 💔💔💔 please advise if I can order the controller only with out having to by everything 💔💔💔😭😭😭
Hello Yusuf khalifa, welcome to my channel. If you burn your Strimer controller, there is no way to purchase, you will need to contact lian li for a replacement as for the uni controller. there is a way to purchase it if your region allows you to purchase item from platform Tabao (from China), else you will need to rma the unit with Lian Li.
@@KleoYan I have contacted BARROW Lodz Store in aliexpress and they send me a replacement for 11 $ 😅 I am relieved, I wouldn't do any test again I almost set My gamming pc of fire after attempting to control lian li strimer on the motherboard .. 😅
@@MrYusuf-zy4tl hi, good to hear that. Have you find out what went wrong which burned your unit? By the way is always a practice to do minor steps as in connect one at a time to the outputs and always double check what you are connecting. All the best in your build 👍
![Lian Li Products - Mega Combo with Uni Fan Controller [L-Connect]](http://i.ytimg.com/vi/njlkdM9lYbI/mqdefault.jpg)
![Lian Li Products - Mega Combo with Uni Fan Controller [L-Connect]](/img/tr.png)
![Lian Li 12VHPWR Strimer Plus V2 (PCI-E 5.0) [L-Connect-3]](/img/n.gif)
Thank you for making this vid. I wanted these cables but couldn't find a detailed video about them.
Hi Grimmy Grim, welcome to my channel, you can get those ready made cables.. just read this description below properly ya :) Once again thank you for visiting and your compliment.
Converter needed
===============
‣ Lian Li aRGB Cable Kit - lian-li.com/product/argb_cable_kit/ - Lian Li aRGB Cable Kit
If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below.
‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters)
‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
Explained everything....🙌🏽🔥🔥🔥🔥🙌🏽
Hi weltsunlimited, welcome to my channel. Thank you for your feedback or is there anything you need further explanation?
Lian Li should include that conversion cable in either the strimmer or uni fan kits (preferably both). Since both products are compatible, they should come ready to connect imo.
Hello ByngerX, welcome to my channel. The way I see it, the strimer plus was out before the uni controller. I believe they do see what you have mentioned that why they came out with the argb cable kit. Nevertheless you can try to write in to Lian Li. I doubt they will provide that in any of their future manufacturing of these products. Is all about making profit. Anyway thank you for your feedback.
@@KleoYan I just watched your video today, then i realized the conversion cable is key to connecting two controllers. I believe lian li did this on purpose just for pushing you to buy their cable kit.😂
@@calmdownbigbrother6405 welcome to my channel. thanks for your feedback, to have two controller, you need to have additional usb Hub. the conversion cables are only meant to protect you from daisy chaining so many fans and to plug into your motherboard argb header, which will cause melt downs or even header to blow. you might not believe it.. throughout my aid to those who seek help from me. they have their mishaps. I dont think lian li is forcing you to buy their cable kit. they have thought about safety operations. you can view the dos and donts in this playlist and you will know how much these fans uses as in argb current. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
anyway am not defending lian li. besides them requesting us to get their argb cable kit. It's also for safety operation purposes. If you know what you are doing like I do. It does not stop me from doing my own conversion cables. ua-cam.com/video/Lz90i5ym4Dw/v-deo.html once again thank you for visiting my channel and to provide your valuable feedback. thank you!
@@KleoYanHi, I would like to get some feedback from you. I m building a new pc. the motherboard is z690a. I got 3of 3pin argb on my motherboard.
I am trying to use 1 lian li argb controller to connect 6 lian li fans, then this first controller I connected it to 1 of argb 3pin on motherboard, name it #1.The second controller is for rest 3 argb lian li fans, I use it for liquid cooler, use a new controller name it #2, and plug it to another 3pin argb on the motherboard. The last controller is about lian li argb 8pin and 24pin controller, I'm going to plug it on the third argb 3pin on the motherboard name it #3.
I use 1 sata power supply to connect #2 and #3 controller. and another sata power supply for #1 controller. is it going to work? any tips or notifications? Thank you.
@@calmdownbigbrother6405 what you have planned out works well. as all your controller are drawing power directly from PSU and to supply the uni controller. so it does work. but on the safe side, check the 12v reel on your PSU. they should have a data sheet to check what kind of ampere it is capable of. A uni controller is about 12.4a (fan and argb load limit) so 3 x uni controller is at 37.2a if your data sheet on PSU of the 12v reel provides above 37.2a (example of a Seasonic GX650) its rated at 54A.. it's more than enough to cater. if it's lesser, then you got to worry about.
You answered what have ive been looking for thanks
Hi Player de la ligue. You are most welcome. Glad to of help. There are other videos I have, based on this uni controller Do browse around ua-cam.com/play/PLEW-b-2vYDdPYyNKmZqrhOH2kEfcRDUno.html , By the way if you like my content, subscribe and click on the notification button. Thank you very much.
lian li 24pin addressable rgb strimmer plus can be connected to the argb in the motherboard instead of the controller?
I don't need the excessive cables and controller right?
If i connect to ADD_GEN 2 PIN also cant?
at least someone make it very clear. thanks for that.
Hi hd krk, welcome to my channel and you are most welcome. I do have a playlist of using the uni controller on lian li products which might interest you too. ua-cam.com/video/4eT0Qf1znoY/v-deo.html
Simple and clear. Thank you! but if we want to connect the 3 pin argb to motherboard directly how le? Any suggestions?
Hello The Blank, welcome to my channel, the controller of these strimer plus has a cable which allows you to plug it from the controller to your motherboard. then trigger the controller button M (hold it 3 seconds) and you will be able to use your motherboard argb software to control it. If you are asking, can the strimer plus directly connected to the argb header of your mottherboard without the controller. My advise to you is don't do it.. you might overload the motherboard argb header and it might melt.
Best video on these cables. A few downsides to this setup though is the effects are very limited compared to what you get by using the strimer hub itself. Also, the lighting seems to flicker intermittently despite using the official argb cable kit and trying all ports on the unifan hub.. maybe it's just mine though
HI Stillward, welcome to my channel, if you have both the 24pin and dual 8pin, try only the 24pin, see if it still flicker. then swap using only dual 8pin. if either one does not flicker, there are two posibility,
1) you might have use alot of peripheral in your computer which uses sata power source. try reduce the number of peripheral connecting to the sata source.
2) Your hub either 24 or 8 pin socket might be faulty. contact lian li for a replacement hub.
so far I have encounter 1), where by multiple pheripheral are connected to one Sata power source. Thing like Sata HHD, other Argb controller and the strimer plus contoller, that caused the flicker.
Thank you so much for your compliment and to have visit my channel.
@@KleoYan mine, just pure died after some minute alive. Ill try using the empty sata cable.
@@love_dva hi, welcome to my channel, hopefully is just a sata connection, if not you might want to contact lian li directly if your strimers are still under warrantly, they will replace it for you. All the best in your build.
@@KleoYan yeah thx, im gona return it since its just came yesterday.
My first impresion is 'woow, theres should be nothing wrong in this 50$ cable'
First i found error patern, then the controler sometimes do nothing, last its dead. I think its bcoz the controler, like its not even worth 4$. argb header cant even take control of this thing.
@@KleoYan that 3 pin argb should be able to control the led right? Even if im not using lianli uni hub?
Thank you so much! I didn't even know the remote had to be pressed to move the sync to the motherboard. You saved me hours of troubleshooting!
Hello ShadowyZman, welcome to my channel. Am glad that this did aid you.
Thank you so much for " hold for 3 sec thingy" , i was actully gave up trying to sync to my motherboard.
Hi Alex Lee, welcome to my channel. Am glad this did aid you in someways 👍
Thanks so much for this video buddy, just like Player de la ligue I've been wanting to know the answer to this question for a while. I couldn't believe Lian-Li would release a product where you have to either have the side of your case off to access the controller or find a way to mount it externally which isn't going to look good but this gets round the problem perfectly.
I recently built myself a new system using the Corsair QL range with the H150i Elite Capellix, Corsair Vengance Pro Ram and a coupe of strips, the whole set-up was just over 2k and I expected this build to last me the next 10 years like my last i7 build however these new Lian-Li Uni fan range along with the strimer plus cable have really got my appetite going to build another, the design and delivery of the argb on the fans I think are so innovative, and when you consider the ease of connection along with the abily to run up to 12 fans safely then I think it's got to be done, and done within the next 6-12 months just so I can sit, stare, and smile, this time though I'm definitely going for the Lian-Li system along with the Kraken Z73, this system will be White so it should look quite nice when it's done.
Thanks again buddy, I have really enjoyed working my way through your videos, new subscriber too..
Hi Chris Harris, welcome to my channel and thank you for the compliment. just to share, I am not sure if you are aware that I do have other videos related to this uni fan series.
if you have not, I will like to share it with you too. This is the playlist ua-cam.com/play/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9.html in this list do watch the dos and donts :) I wish you all the very best in your build. once again thank you for your compliment and to have subscribe to my channel.
Man would love a video on doing the strimer plus + 9 uni fans to the uni controller. I just got the Lian li argb kit
Hello Emanuel Gjoni, pardon me, I do not have the lian li argb kit but I did my own cable converters and applied the combo of all lian li argb products ua-cam.com/video/njlkdM9lYbI/v-deo.html there are more videos which I did as I did break them down, you might be interested in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html now for lian li cable kit. I did help out some of my viewers which you might be interested with diagrams, refer below
MSI with AL - imgur.com/gallery/F0khMEW
O11D XL case strip to Strimer plus - imgur.com/gallery/kxd86ob
NZXT with AL120 - imgur.com/gallery/rGxCQ87
SL120 with Galahad - imgur.com/gallery/ioHqX0w
Original Galahad wiring arrangement - imgur.com/gallery/KzhQOJ9
Lian Li aRGB Cable kit demo - imgur.com/gallery/beYR8CN
Corsair H100i Elite Capellix to Uni controller - imgur.com/gallery/Rtg5ff6
Argb Cable Kit with Galahad and Strimers - imgur.com/gallery/ErMZdQh
@@KleoYan man you are so kind. Thank you for sharing that. I did have the strimer plus 2 of them, 9 uni fans, the Gallahad I just went straight to motherboard as I was worried about overloading. It seemed to work except my strimer plus gpu had one led not lit. This made me worried about too much amps. So I removed the strimers and just hooked up the 240, 4 group of fans to the uni
@@mannyfresh7065 I see, as for overloading, I will not overload so long your strimer plus are connected to it's controller as there is a power source (Sata) to the strimer plus controller, then from the controller to the uni controller. It will be fine, so lone as it's plug individually to 1 of the output in the uni controller. Though you this diagram is of total 7 fans but it's still applicable in your case imgur.com/gallery/beYR8CN, if you have any questions, do let me know and I will try to aid you out.
Awesome I dont think I wired mine correct since MB does not pick it up so will redo this weekend
Hi ya. All the best in your build 👍
World greatest help! Do you know how many videos ive had to go through to find yours! Thank you thank you thank you!!! Subscribed!
Hi Adam, welcome to my channel and thank you for the compliments, infact I've done a series of video on this uni fans which you might be interested ua-cam.com/play/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9.html , once again thank you for visiting and to have subscribe to my channel.
great video, im subscribed !! question for you: what else could i use the strimer cable for in my new build chassis instead of putting it on the GPU cable. i have the lian li strimer 24 and would like to find a good place in the chassis (Lian Li EVO) to put it. i think it would be cool to put it somewhere but where I don't know, my current white ANTECH cables look so good (16 AWG) that I don't want to ruin the effect of those cables. HELP
hello dabney offermein, welcome to my channel, it greatly depends on your creativity and you might just wait for the strimer plus V2 which will be out or should I say release in one day's time. the L-connect 3 is pretty awesome .. lian-li.com/l-connect-3-beta-program/
OMG thankyou i dont know that i have to press the m1 for 3 sek THANK YOU
Hello rafuxxxxx, welcome to my channel, you are most welcome. am glad my content did aid you.. infact I have done a series of video about this uni controller which you might be interested. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
Thank you so much!! Didn't know about pressing the M1 button to enable ARGB management by the motherboard 😍
Hi Geeky Stuff, welcome to my channel and you are most welcome, btw I did a series of content about these uni controllers which you might be interested ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html . there are also dos and donts about this unit too. once again thank you for have visited my channel and all the best in your build 👍
@@KleoYan Thank you! I am putting together a video of my PC build too 😃
Nice. I have subscribed to your channel and set on notification. Will be great to see your final build😉 all the best buddy 👍
Thank you for explaining this very well. The thing I am unsure of is where to connect the 3pin bypass cable on my motherboard? is it on the 5v add gen 2 connector?
Hello mr_narto, welcome to my channel, if you are talking about the 3pin argb connector from your uni controller to the motherboard, yes, connect that to your motherboard 3pin 5v argb connector.. make sure is 3pin and not 4pin..
This is literally the perfect solution I was trying to look for. Control by PC software without affecting other RGB fans I have in the PC build. 9:20 - Where I can buy this device? I couldn't find it on Lian Li's website.
Hi Max Dax, welcome to my channel, if you are talking about the uni controller, it comes with the SL120 Uni Fan, it's not sell separately.
Great video! Question for you though if you can please help me out. I already have the 24pin and triple 8pin Strimer Plus's, and have 10 sl120 fans on the way. Would it help me out rgb power wise if I use 1 hub for all the 10 fans, and then another hub to run to just the Strimmer Plus's. I've seen a few posts around the web about rgb flicker due to power so my thought is using one of the extra hubs would fix.
Hi Nucl3ar, welcome to my channel. Flickering can be the cause of either unclean power going to your system. I would narrow down equipment separately. First is to test out your 10 x SL120 fans with the uni controller, next will be test only the strimmer plus controller itself without the fans on. if both works then this tells you that that your lian li equipment is not at fault. Next connect both to see if it flickers. if it does, reduce some fan set from the uni controller. If the flicker stops. it means that your PSU unable to provide sufficient power to carter the lian li controllers you are using. Just a question, your uni controller and the strimer plus controller, are the using the same sata reel from your PSU? if they are, try separate reel. you see even if you have an additional hub, if your PSU is not able to cater the load. it's pointless. so hope you will do some basic troubleshooting first before hooking up another uni controller.
First of all thank you for all the good videos! Second of all. I connected the Strimer Controller to uni fan sl Controller successfully. However if I press and hold m1 the strimer turns off. If I start using L connect 2 the strimer won’t react to anything. Any recommendations? Unifan is working fine. I already tried to use channel 3 or 4. Also I turned of my computer once and unplugged the PSU.
hello EpicBluePixel, welcome to my channel, I only try this strimer plus on the orignal SL uni controller with L-Connect and I am not able to try it on a L-Connect 2, as the strimer plus, I have returned to the owner. You might want to ask your questions over here www.reddit.com/r/lianli/
Thanks a lot for the tutorial and explanation.
Just curious, given the way Strimer Plus's RGB header can be connected to the Unifan controller as demonstrated, can other RGB devices with 5v rgb header be connected to the controller, and controlled by L-connect, too?
If this can be done then it'll be awesome. Right now I have some RGB devices connected to my MSI motherboard's RGB header but MSI's software is a disaster in terms of lighting effects.
Hi w00tilicious, welcome to my channel. You can but take note on the ampere load which plugs to each output of the uni controller and converters are needed. For each output the ampere limit is around 2.6a load. So any argb which u plug in to any of the output below 2.6a load will be fine.
Thanks!
Hello Farhan Rafik, welcome to my channel and you are most welcome. All the best in your build :)
You deserve way more subscribers than this man. thanks.
Hi Kevin Corrigan, thank you for the feedback. it's ok, I am keeping my channel just to share experience and as a hobby :P, nevertheless thank you for your compliment and to have visit my channel.
Great video. Question, do you think it’s preferable to have them controlled by motherboard or by the switch? I haven’t played with it too much yet but figured I didn’t want to keep opening my case to change effects so maybe motherboard is easier. Controller effects seem really cool though. I don’t know what type of effects my pc offers yet though as I just finished the build and haven’t hooked it to a monitor yet.
Hi DrGameStar, welcome to my channel. I would prefer to use the strimers controller to do that as it has some patterns which the motherboard argb utility does not have, unless you make use of 3rd party application like the SignalRGB www.signalrgb.com/ (I believe you need to pay)
@@KleoYan thanks I think I will try the controller then!
@@drgamestar2161 you are most welcome and all the best with your build 👍
Great video! Thank you. You mentioned a third cable that goes into the controller for use with the Lian Li Dynamic cases. I have an XL and cannot find out how to take advantage of that third cable. Any suggestions?
Hello Edgar E, welcome to my channel and yes I did mentioned that. you might want to see this diagram, infact it's all written on your case and strimer plus manual. imgur.com/gallery/kxd86ob
Thank you for the video! Can I get that single argb cable you hold up at 9:04 somewhere? Or do I have to buy the whole argb cable kit?
Also, if I'm using strimer pluses and uni fans, can I plug the strimer pluses into my Mobo directly, the uni fans into the controller and then into the motherboard, and control it all through L Connect?
Thanks again!
Hello Javi Martinez, welcome to my channel you can get just the cable but you will need some needle connectors. here is what you need.
Converter needed
===============
‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters)
‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
and as for your next question. if you want to use the motherboard application, you will need to plus the argb cable between the strimer plus controller and to your motherboard argb header. same goes to your uni controller. this way you can control both controllers using your motherboard application.
Hey thanks for the video. I have a question aboout at minute 10:00 . What if 1,2,3,4 of the bigger cable input thingies are used. Can you still use converter thing Y Splitter cable for it to work? I have the SL Inf UNI Hub with i think 2 of the Y Splitter thingies and one is used for my AIO Pump Fans.
Hi Alexandar16, welcome to my channel. if you are asking can you use a splitter at 10:00 to connect your old strimer plus to the SL Inf uni hub. yes you can.. by use the converter, you can plus to either sync 2 or sync 4 port on the SL Inif uni hub.
Thanks for the informative video. So, how you can connect 24-pin strimer plus to the A-RGB 3-pin splitter (for example, of DeepCool case's), not directly to the motherboard? Is is possible without problems?
Hi Kakha Khmelidze, welcome to my channel. May I ask which DeepCool case are those. I can do a quick check if it's possible to connect the strimmer plus controller to the case argb controller. thank you!
@@KleoYan Sorry for late reply. Case is MATREXX 70 ADD-RGB 3F. I just need to know, if I can connect this to the DeepCool A-RGB splitter. I have biunch of A-RGB fans and my motherboard have 2x A-RGB (3-pin) header. SO I have two bunch of A-RGB fans for those two A-RGB headers. I just need to know, may I connect this LIan Li STrimer PLus to my A-RGB case splitter and use it synced with my other A-RGB fans?
@@kakhak hi, welcome back. as to answer your question, you have to connect the stimers to it's own contoller first as make sure the Sata cable from PSU to this controller is connected, then connect the argb connector from this controller to your case argb controller. not an issue. you will also need to set motherboard mode in the strimer controller by pressy the M button for 3 seconds.
@@KleoYan Hello,, my case has only splitter cable, it does not hav
E a controller. My mobo has two ARGB header and I can't connect this Lian Li strimer directly to than on of the motherboard headers, because it is already occupied. I need to know, may I connect this strimmer to cable splitter together with another ARGB fans?
By the way, as I know, this strimer comes with cable which can be used to connect strimer to MB without its own controller. Will be great if there is possibility to connect striner without any controller directly to the case ARGB cable splitter. This splitter then connects to the motherboard ARGB header.
@@kakhak my bad, I read too fast on this manual and assume there is a controller build in your case. www.deepcool.com/download/pdf/MATREXX_70_3F_Installation%20Guide_En.pdf if that's the case. I would advise you to get a argb controller for your fans. it's not wise to daisy chain all argb connection and connect to the motherboard. it might overload. if you really wanted to connect all to your motherboard argb header, read the manual and see what is the max limit load it can take. also calculate those fans LED load. not the fan load. total them up and see if your motherboard argb header can take it.
Thanks for the info, just what I needed and not skipping over the important parts like some people do 👍👍
Hello Bada, welcome to my channel and you are most welcome, hope this video do aid you in someways :)
Great video. I have the Strimer Plus and Uni fans and I want to use the uni controller for both.
Hi NHILL Production, welcome to my channel. Thank you for the compliment 👍 and all the very best in your build.
Great video! Only issue is that the cable kits aren't really available in the US and if they are they are price gouged. All I need is the converter cable from the Strimer based to the Fan Base. It looks like a $1 cable and I really don't want to pay $150 for it. Problem is I can't find the name of the 3 pin female connector that plugs into the fan base unit. I can extend it or even make the cable myself but I can't find it! Do you know what the name of that 3 pin female cable that has the little clips on the side? 3Pin 5V to 3Pin (4 Position) ARBG female header? Thanks
Hi Kilgoran, welcome to my channel and yes then cable kit is a bummer to me as I can’t get it anywhere either. So I did my own crimping which is not difficult 😁 ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
@@KleoYan Subbed. Ty Sir
Hey I was actually just looking for this video and got the notification
Hi Frozen Walrus. Welcome back and hope this video did aid you. Thank you for the feedback. 👍
Almost done with the build need the fans cables power supply cpu and gpu then I’m done
Personally I was mainly wondering if the effects would be the same I think I’ll just go with the normal controler
@@charlesbergenske6580 I see, all the very best in your build :)
@@charlesbergenske6580 to be honest, the Strimer controller itself, some of the effects you can't get it on the uni controller. So it greatly depends what your liking is... maybe test both out to see which you like most then stick with it.. Cheers!
This helped out so much fixed my issue of me not understanding the product fully I thought I needed to have more cables then just the sata power for rgb controller affects to work! Thank you so much!
Also Ik you put a lot of time into these I was wondering if you heard any about connecting a razer o11 dynamic to a uni hub/ anything in L connect because I use razer synapses rn for my light strips on the case itself:)
Hi Ghostly, welcome to my channel and you are most welcome :).
@@KleoYan np great stuff! Also I edited my comment just as you replied do you know anything about what I was talking about in the edit?
HI Ghostly, not that I know of. do pardon me to have the lack of knowledge on this. Will try to do some research about it. Will update you once I found out anything.. or you might want to ask a bigger crowd here www.reddit.com/r/lianli/ . hope this help.
I notice you mentioned you have to purchase the argb cable kit to get that cable in order to connect. It's about 20 USD where I am, was wondering if you think it would be a cheaper option (7 USD) to buy a ARGB 1 to 5 splitter cable and plugging the fan controller into 1 and the strimer controller into the other? Would that still allow to sync since they are both connected to the MOBO through the ARGB header
Hi Tim Chan. Welcome to my channel. It will be good if you can list down what device are you connecting to. Example fans to the uni controller or motherboard argb header? In general there is argb load limit on hub/controller.
@@KleoYan ASUS TUF B460M Plus. I'm just trying to think if there's any other way to sync the cables with the fans apart from buying the cable kit? I guess there is a argb load but the reviews on those Cooler Master 1 to 5 ARGB splitters seem ok
@@TimTakeAway Hi ya, is not able the cable is about the headers you going to plug to. based on your Asus Tuf B460 Plus dlcdnets.asus.com/pub/ASUS/mb/LGA1200/TUF_GAMING_B460-PLUS/E16866_TUF_GAMING_B460-PLUS_UM_V2_WEB.pdf there is only one RGB 12volts header on the motherboard, it's not compatible with any aRGB 5volts fan or strips if you want to connect it directly to the motherboard header. If you are only connecting to your Lian Li Strimers, you got no choice but to use it's own controller. and if you are trying to plug any argb Fans, you will need a contoller. I assume you are using the SL120 Uni fans.
overall your board does not support aRGB functions. therefore you need a aRGB controller, as I have mentioned to you, kindly list down all your aRGB components that you will be using, if not I am not able to explain fully to you. Example what fans and model are you using besides this Strimer Plus?
@@KleoYan I believe you linked a different motherboard, mine is www.asus.com/Motherboards-Components/Motherboards/All-series/TUF-GAMING-B460M-PLUS/
which has one argb header on it. my question was whether i can connect the unifan controller and the strimer to shopee.com.my/Cooler-Master-Universal-ADDRESSABLE-RGB-1-to-5-Splitter-Cable-1-TO-5-ARGB-Fan-Cable-i.27709151.4868367303 and be able to have mobo control with this method
I intend to connect x9 unifans to that controller and the strimers to that splitter cable, instead of buying the cable kit mentioned in the video
I nevver understood that such a premium product is made with a manual controller and not, say usb controller so it can be fully controlled by software from the beginning.
But can the uni fan controller make all the exact same modes as the manual controller can?
Hi M. Colby, welcome to my channel. The uni fans have too high Arab drawn current. It will not work even if you find a way to connect them to this v1 controller. Now as for the strimer plus to have it control via USB. You can purchase for v2 controller. ua-cam.com/video/uWNZO2HVgxE/v-deo.html
Been looking for a video like this, thank you so much! I will get this cable and see if I can get it to work.
Hi Corndog, welcome to my channel and you are most welcome. By the way I have done up a series of this uni controller which you might be interested ua-cam.com/play/PLEW-b-2vYDdPYyNKmZqrhOH2kEfcRDUno.html once again thank you 😊
hey man thanks for a vid! Quick question can this Lian Li software sync with asus or nzxt cam?
Hi Khairil Nazmi, welcome to my channel, nope, it will not sync, strimers does not need L-Connect app to do argb effects unless you are talking about connecting it to the uni controller. you can then connect the argb cable which is suppose to plug from the uni controller to the motherboard, you connect it to your asus or Nzxt cam. then on your uni controller select to motherboard mode, then make use of your nzxt cam or asus to control the argb effects.
if you are talking only the strimers controller, yes you can, just plug the argb between the strimer controller to your motherboard header or to your asus or nxzt controller to controll the effect. but you will need to press on the M button for 3 seconds to set it to motherboard mode.
@@KleoYan ah i see. Very detailed explain by you, thank you so much!
@@khyryII you are most welcome and all the best in your build :)
Bang pakai aio nzxt pastu convert ke
@@TheKuantan pardon me, I do not understand your language. mind to translate that in English, thank you!
Hey man thanks for the info on the commander pro - just another quick one; on the “unifan” how many RGB connectors are there?
I want to power the 8+24 pin as well as 3 other lian Li RGB fans (AL120)
Do I need to buy a “daisy chain” for my fans to connect into the one port or are there enough on the unifan ??
hi dbwarzone, I hope I understand your question correctly. The fans itself interconnect and they do come with 3 connectors as there are three fans in a set unit. AL or SL, both the same, no diff. and the uni controller do have a argb connector to the motherboard, so instead of plugging in to the motherboard, you can plug to your NZXT kraken controller.
Hey, I love your videos man. Great way of explaining everything. I got the Lian Li O11 Dynamic XL case, Lian Li Glahad 360, Strimmer Plus 24 Pin and then I have 7 x Lian Li SL120 Uni Fans (They came with 2 x Fan Controllers). My motherboard only has 2 aRGB headers and I cannot get all RGB's working since I never got the Lian Li Cable Kit you recommend. Is there any other options for me, I want to use my motherboard to control RGB's. In one of your videos, you mentioned connecting the Strimmer Plus directly to a Lian Li case? Is there a work around at all here?
Hi Zursen, welcome to my channel. Just for your info, you can currently use one uni controller till lian li will announce at their website, as when they going to release an update version of L-Connect, so that you can use two. now I do have another video which might aid you on the connection. ua-cam.com/video/njlkdM9lYbI/v-deo.html but do note that I am only using the uni controller. if you want to use your motherboard to control, all you need is just to connect the argb cable from the uni controller to the motherboard argb header. Just make sure you L-Connect is set to motherboard mode. Same applies to the fan rpm.
now for the lian li argb kit, me too not able to get it in my country and ordering from overseas is expensive. therefore I choose to crimp my own and here is how ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
hi geat video BTW.. i have a question if i buy only 8Pin (connect to mobo only), can i still customize the 18RGB?
Hi Hasrul Nizar, welcome to my channel. if you plug 8pin to the motherboard, you will need to use your motherboard argb to controller the argb effects. btw when you've mentioned customized argb. what type of customisation are you referring to?
@@KleoYan you already mention there are 18 type of ARG when using controller. So if without controller how?
@@kmdrenz1444 oh my bad. Now understood. Nope, without the controller you can’t do the 18 effects. Only the simple ones from your motherboard application if you connect the 8pin directly to the motherboard argb header
@@KleoYan thanks for reply sir. For sure i will follow your channel :-)
@@kmdrenz1444 hi just call me Kleo will do 👍 and thank you for following my channel.
Do you have to buy any any extra parts and this video or do they all come with the fans and cables
hi Zac Tan, welcome to my channel. If you did get the Strimer Plus and Uni SL120 fans, all parts are included in this video except for the 3pin argb to a 3pin JST 03 male converter, which I crimp myself here. ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
awesome video! but how would i do this with the 10 fans i already have? I bought the Lian Li argb cable kit. i tried some stuff but its not working.
Hello amin mujkic, welcome to my channel. this video migth be able to aid you ua-cam.com/video/njlkdM9lYbI/v-deo.html and this diagram is an illustration on how to make use of the lian li argb kit. imgur.com/gallery/beYR8CN
@@KleoYan thank you! i will try this when i get home! i will post an update on how it goes. If you dont mind do you have a discord server?
@@lulzr4u Hi ya, that will be nice of you and all the best in your build. As for discord, nope I don't have one and I do not use it. sorry!
@@KleoYan no worries my friend! thanks again!
@@lulzr4u You are most welcome :)
So I need to buy strimmers with control, the converter, and 3 pack unifan with controller to do the same what you just did.
Hello Levi, welcome to my channel. This illustration is just to show you how to connect the strimer plus to the uni controller. as what you are purchasing is up to you.
@@KleoYan is it possible to go from strimer directly to Uni fan controller directly
@@levilah3426 you can do it with only 1 8pin but not additional. plus it's not safe to do so. best is still going through the Strimer controller.
Very clear in your explanation. Thank you so much.
His desmond, welcome to my channel and there are other videos related to this uni controller which might interest you ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html once again thank you to have visit my channel 👍
Hi bro! Awesome video on how to. But 1 question, i'm having a hard time sourcing out the conversion cable. Any idea where i can score one? Instead of the Lian Li one.
Hello Ramil Zain, welcome to my channel. you can use this.. choose orange www.ebay.com/itm/265640026415 and you might need the needle pin too but you will need to pull one out as i can only find the 4pin and not 3pin www.ebay.com/itm/133188634508 or alternatively you can wait for the Strimer plus V2 controller which will be out soon and here is how it looks like with the L-Connect 3 app. ua-cam.com/video/J76Zyd1GzNA/v-deo.html
Hi Kleo! Thanks for the reply. I’ll get my order in. Thanks man! 😂
@@ramilzain4616 you are most welcome and please do not daisy chain too much as there is a load limit on the controller. Do watch the dos and donts of the uni controller in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
@@KleoYan Thanks for the advice bro. Btw, any idea to actually to connect both strimer and unifans to a razer chroma argb controller? I've so lost for weeks. Thanks in advance!
@@ramilzain4616 based on the chroma controller, If you have already plug the strimer plus to the uni controller, the uni controller has a argb from the controller to your motherboard, instead of plugging to the motherboard, you plug to your chroma controller. you will need to set in L-Connect to motherboard mode, then you can use the chroma to control the argb. but having to say this, kindly make sure your chroma is able to handle the argb load. I wont be responsible if anything goes wrong as I have not tried on the actual chroma controller.
Great video! btw I have a question regarding the Lian Li Uni fan controller. My setup has 24pin cpu Strimer and gpu 3x8pin Strimer with 8 unifans for case fan. All the ARGB socket on Unifan controller are already occupied, do you think I can make use of a ARGB splitter to connect my Strimmer Plus controller to uni fan controller? Right now my Strimer cables can only be controlled separately by its controller. I want it to be connected to Unifan controller so I can sync the lights.
Hi PrimeSlime, welcome to my channel. Maybe let me know how your fan setup is like. Example 3 top, 3 button 3front and 1rear.
@@KleoYan my case is Lian Li Lancool II Mesh. Front 3x fan, top radiator 2x fan, back exhaust 1x fan, and bottom of GPU 2x fan which total of 8 fans.
2x Strimer cables that runs independently. If possible I want it connected to Unifan controller using argb jst cable splitter
@@PrimeSlime hi ya, thank you for your reply. This will be ideal
On the uni controller
Output 1 - front 3 fans
Output 2 - bottom 2 fans + rear 1 fan (to use fan argb JST connector)
Output 3 - top 2 fans
Output 4 - to your strimer plus controller and remember to set it to
Motherboard mode.
That’s how i will do it so that your unifans are with similar argb load or less.
@@PrimeSlime oh btw this vid might aid you ua-cam.com/video/njlkdM9lYbI/v-deo.html
@@KleoYan Thanks for your response. I will try to use your recommendation. Your videos are very well made. Direct to the point and explained very well. I'm so glad that I found your channel. It's a huge help for me. Thank you very much!
Awesome video man. I just want to ask how to config the strimer plus controller and uni fan controler in order to use 10 SL120 fans + 24-pin Strimer Plus + 8-pin Strimer?
Hi Jed Victolero, welcome to my channel. I believe this might help you out ua-cam.com/video/njlkdM9lYbI/v-deo.html and thank you for the compliment. 👍
Thank you for this very informative video. For the 8+8 pin strimer plus, will it still work on a gpu with only a 6 pin connector? My gpu has a space where I can just tuck in the extra plugs but I don't know if the lighting will work
Hi stillward, welcome to my channel. Yes it will work as the argb strips on your 8+8 pin is controlled by the strimer plus controller
@@KleoYan alright thanks!
@@ensiel4738 you are most welcome and sorry to reply you late as am busy at work. Thank you for your visit 👍
You're the man bro. Thanks for your help b
Hi Tyler King, welcome to my channel and thank you for the compliment. Btw I have done a few series with the uni controller which you might be interested. do take note of the dos and donts and is listed in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
@@KleoYan I used your guide about 6 months ago to get my unifan and AIO going! Just added the strimers to my PC today and used this guide! You've been a great help. The PC looks great!
@@ItsgoodtobeKING oh I see, that's good to hear.. am glad you've build something you wanted and dream off, congratulations 👍
Thank you I was struggling, thx to you a working great.
I did notice the new 3x8 in purple, which is my build colour is not as vibrant as the old 24 pin..
Thanks for making this.
Hi Darren Davies, welcome to my channel and thank you for the compliment. Yup I did notice that too, the problem is, the longer your argb strips are. The color will dim down as not enough ampere to provide the 3rd 8 pin strip. That’s why it draws and share with 3 8pin strips. Hopefully Lian li will come out with a rev 2 of the controller to supply more ampere or current.
Can you have the effects like Drizzling, but with a static colour background?
Hi Dragonling, welcome to my channel, with the strimer plus controller, I dont think this can be done, you can try geting the V2 strimer plus controller and to make use of L-Connect 3 and these are the effects ua-cam.com/video/J76Zyd1GzNA/v-deo.html and the actual product of the V2 controller. ua-cam.com/video/uWNZO2HVgxE/v-deo.html
hello brother, so I bought the strimer 24 and the strimer 8 pin, I can also connect them directly to the motherboard without connecting the transformer for the fans, does it work the same or do I have to take it?
Hello Simone Gadaleta, welcome to my channel. You can just plug directly to your motherboard argb header (5v) from the strimer plus controller no issues. the Uni controller is if you intend to get SL or AL uni fans which controls by the uni controller. you can ignore the argb converter. that's not necessary.
This is such a good video. I only have 1 rgb header on my MOBO so it’s important that I use the provided controller. Just wanted me question, how do you turn on the cables once connected?
Good day Rashed Zaman and welcome to my channel. when you use the provided controller. your controller is connected via the PSU Sata cable which provides the power. once you power on, your strimer plus will light up automatically. one thing though, since your controller is inside you case. you will need to preset what pattern or color you want then everytime you turn your pc on, it will be that pattern and color.
@@KleoYan do I have to manually shut the power supply off in order to turn the cables off as well?
@@rashedzaman6483 if you have a way to place the controller outside your case. you can use the controller to shut down the argb effects.
Thank you very much friend for this tutorial, I did it as you explain it and it worked very well
Hello Juan BArrios hirose, welcome to my channel and you are most welcome, am glad this video did help you out :)
It doesn't made sense tho as to why Lian Li Strimmer doesnt come with a remote for their Strimmer Hub. That way you can leave the HUB inside the PC and control it with remote/Software. The Hub has a lot more options when it comes to effects compared to software.
Hello David P. welcome to my channel. I do agreed what you have said. maybe post your question at their reddit and to suggest. It might help. www.reddit.com/r/lianli/
Hi, how would I connect or sync everything my motherboard? Here some parts I have: Lian Li Uni Fans 3x 120mm / 5x 140mm & Lian Li 24 pin Strimer and 8 pin Strimer. Case: Cooler Master C700P Black Edition & Motherboard : Asus Rog Maximus XII Formula. My case has RGB, so how can I connect my Case RGB directly to my motherboard or can I connect it to my uni controller? Thanks for your helpful videos.
Hi Johnathan, for connection wise. this is how you can follow, you will need to work around as ilustrated. ua-cam.com/video/njlkdM9lYbI/v-deo.html and as for using your motherboard to control the argb, this will give you a better understanding. ua-cam.com/video/Rm2emeyMUAk/v-deo.html
@@KleoYan Thanks, I will give it a try. Im still waiting for my Lian Li Device Kit to arrive seeing how I had to buy it on Ebay.
Does the 8 pin and 24 pin come together if you order the lian li strimer plus? Or do I need to purchase both seperately?
Hi hary, welcome to my channel. there is a combo purchase or individual purchase. it depends what you are getting. if you getting the combo which is the 24pin and the 8pin, it comes with the strimer controller. if you get the 8pin, you dont get the controller and if you get the 24pin, it comes with controller.
Hi. Any of them or similar product working wirh corsair hubs? Greetings from UK. Tom
Hello tenzin044, welcome to my channel, as illustrated in this video, the strimer plus has it's own controller and you can set bypass to motherboard mode. There is this cable before I show you the coverter to plug to the uni controller, you can don't use that coverter connector, just plug the standard argb connector to your Corsair hub, that should work. Just make sure that the strimer plus controller is powered by the sata source of your PSU and make sure to set it to bypass to motherboard mode by pressing the mode button for 3 seconds.
Ty so much for your videos. I have a question. I can have 24 pin and triple 8 pin streamers along with 10 fans SL fans connected with the argb kit into the hub with no issues correct?
Hi 2NA, welcome to my channel, nope no issues, infact I have a series of videos on the uni fans and it's controller, which you might be interested, playlist here :) ua-cam.com/play/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9.html and do watch the dos and donts (important) also the Mega Combo.
If you are using the lian li aRGB kit, this diagram might aid you in some ways imgur.com/gallery/beYR8CN
@@KleoYan ty so much!!!
@@2NAA you are most welcome 👍
I have that thing for over a year now and you are telling me I can bypass the controller just by pressing one buttom for 3sec? Was looking for that for so long.
Hi Jetto Bazzokah!, welcome to my channel. yup you can by pass it and use your motherboard argb software to contol the argb effects. all the best and have fun.
Hey, Great video, I only bought the 8 pin cable for my gpu, can I plug these directly into the motherboard without the uni controller, I have one 12v JRGB controller on my msi b450m pro vdh max. As far as I understand the fan headers output 12 volts and the strimer only uses 5. I’m really confused on how to use only the 8 pin gpu cable without the uni controller.
Hello Pro Max, welcome to my channel, after taking a look at your motherboard chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/viewer.html?pdfurl=https%3A%2F%2Fdownload.msi.com%2Farchive%2Fmnu_exe%2Fmb%2FM7A38v8.1.pdf&clen=9338230&chunk=true , you cannot use that to connect to your strimers. that is not for aRGB is for RGB. Strimers are aRGB which is addressable rgb that runs on 5v . do not connect that to your JRGB which is 12volts.. anyway you cant as it's four pin. argbs are 3pin. I am afraid you will need to get a argb controller for that.
@@KleoYan Thanks for your answer! So should i just buy the 24 pin one as well for the motherboard and use that controller. I guess that’s the easiest option
@@promax6024 yup either that or to get a argb controller. But is better if you get the 24pin strimer plus which comes with the controller
@@KleoYan Thanks for the help! Just bought the 24 pin too👍
@@promax6024 you are most welcome. All the best in your build 👍
Can you do this with the Strimmer controller V2 and the Infinity uni Fans Controller?
Hello Harold Molina, welcome to my channel. Yes you can plug the strimer plus v1 to the strimer plus v2 controller ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html in the playlist click on L-connect 3 (strimer plus) or another which is the strimer plus v2. As for the SL infinity controller, you can plug but have to use the strimer plus v1 controller and to purchase the argb kit, but you can’t set the effects listed in L-Connect 3. I would advise you to get the strimer plus v2 set or if you have the strimer plus v1. Just get the v2 controller.
Both of them bring the remote?
Hi ρ૯ѳρl૯ツ, welcome to my channel, do pardon me, I don't understand what you meant, mind to elaborate? by the way Merry Christmas and Happy New Year.
Thank you very much for the Details!best man!
Hello Elta552, welcome to my channel and you are most welcome :)
Another great video, thanks for the clear information.
Hello Peter, welcome to my channel and thank you for your feedback. 😉
@@KleoYan you are welcome Kleo, hi from freezing cold Norway.
@@pete9b I wish to exchange region with you. My area here is always hot and humid 😂
@@KleoYan mine weather is normally wet and rainy. -2C here today but dry and OK. I am considering upgrading my PC and buying the Lian Li Lancool III A-RGB case, I found your video description very helpful.
@@pete9b I see, wow.. cool weather. Hey thanks for the feedback. Yup, I am trying to do content which is based as a PC Builder more than a reviewer. As often, lots of details we wanted to know is often not mention.. Lian Li Lancool III case is beefy and has lots of function and all the best with your build too. hope you will like the case like I do.
So If I watch to controller it with the software I just need to conect it to the 5v ARB on the motherborad. Soni don't need any other other 3 way to conect it meaning psu or sata,micron b usb way?
Thanks
Hello Dead Angel, welcome to my channel, if you do have a uni fan controller. Yes you can do that by using L-Connect 3 app. If you do not have that, then your only option is to connect the strimer plus argb cable directly to your motherboard argb header and to use your motherboard utility to control the argb effects. Make sure you press and hold the M button for 3seconds to bypass and to use motherboard mode.
Hi do you know where I can purchase the ARGB converter? All of the cable kits are out of stock or highly marked up.. thanks!
Hi Mike B, welcome to my channel. this might help but you need to search for the needle as I am not sure if it does come with the needle for the standard ARGB connector. btw please note there is a load limit on these uni hub/controller. www.ebay.com/itm/265640026415?hash=item3dd961212f:g:94gAAOSwi7piVO2b
I bought the convertor like you suggested. My strimmers are now in sync with my 9 uni fans and can control it via Lconnect. But since the argb is connected to the hub I can no longer control and sync everything via armory crate. Is there a way to get all fans and strimmers to sync with alru chat on top of being able to control all fans and strimmers via LC?
Hello Ed Mina, welcome to my channel. if you have connected all the lian li argb products and to be controller by L-connect, you can always switch to motherboard mode on L-Connect. this till take instructions from your motherboard argb app (Amour Crate). you have to make sure that your argb cable is connected between the uni controller and the motherboard argb header.
Can I use Lian Li on a ROG STRIX 3060, even if it only has 8 pins? The Lian Li cable comes with 8 pin x 2... 8 pins will be left free
Hi Andrea Lucero, welcome to my channel. you can still use it, just that the additional 8pin you have to leave it unhook.
Hi, great video for references. Btw, im trying to sync strimer plus 24pin and unifans like you just show in the video. However ive tried by using the unifan given splitter (2 male, 1 female), connecting it between both of the controller argb input and plugging on the female into mobo. However, it seems that my method is not work as it is only change the colour of the unifans only..Is my method is unapplicable??
Hi Ahmad Raidi, welcome to my channel, the splitter you are referring I believe is the standard argb connector. That will not work, you need to plug the strimer plus standard argb connector to the Uni controller. maybe this will aid you ua-cam.com/video/njlkdM9lYbI/v-deo.html
@@KleoYan thanks for the clarification!
@@ahmadraidi7448 you are most welcome, all the best in your build too :)
can't thank you enough my man. I've been struggling to find the way to connect them to my motherboard!
Hi unplugged96, welcome to my channel and am glad to be of help. Once again thank you for visiting my channel.
Is there anyway I can get the controller and sata power cable for it without buying the 24pin?
Hi JR516, welcome to my channel. The best way is to purchase the Lian-Li Strimer L-Connect 3 Controller which you can use your V1 strimer plus. www.aliexpress.com/item/1005004239607087.html
Thank you very much. It was a great explanation. Please, if possible, I want the program with which to write commands for a device LED controller
🌹🌹🌹🌹
Hello Sultan Al-qalisee, welcome to my channel. As per your request, do pardon me as I am not well verse in that field, you might want to search for arduino www.arduino.cc/ and to find out what are the wire connection point to the ardunio device. once again thank you for your visit and to leave your valuable feedback.
@@KleoYan
Thank you very much 🌹😇😇
@@sultanaq7 you are most welcome. Hope you will find the answer you needed.
Hi, sorry, I have a question. For the bypass, whenever I turn on the PC I must press the m1 button or it has some type of memory and remains in bypass mode
Hi Miguel Angel Valencia, in the past when I use these strimer plus, so long you did not unplug the PSU ac cable and just off your pc. When you turn it back on. The setting stays as bypass.
Hello, I wanted to ask if you can put the link for the exact converter you have?
Hello Johnomar21_x, welcome to my channel. here you go .. infact its in my description.
Converter needed
===============
‣ Lian Li aRGB Cable Kit - lian-li.com/product/argb_cable_kit/ - Lian Li aRGB Cable Kit
An illustration of Lian Li aRGB Cable Kit - imgur.com/gallery/beYR8CN
If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below.
‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters)
‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
Hi, regarding your comment at 1:20 where the 3rd cable can attach to the 011D case - where does the end of that cable attach to in the case?
I have the Strimer + 24 pin and a 011D case and I wanted to control the animation externally somehow as the hub is stuck inside the case. I am connecting the aRGB directly to the motherboard.
hi roadster38. on the O11D XL case that is. the control unit at the bottom (near the cover shroud), there should be a cable that allows you to connect to the motherboard, use that and connect it to the third plug of your strimer controller. I wish I still have this strimer plus that I can show you through a video but I have returned it to the owner. so sorry about it. anyway for more information on this. you can either go to lian li official website under support FAQ or to their official UA-cam channel to look for info.
@@KleoYan is it only on the XL case? I am using the standard one.
@@roadster38 ah ok.. my bad, after further looking at O11D case.. they dont have that argb. only on the O11D XL, sorry my bad.
@@KleoYan Cool no probs! Thx for confirming.
Can you connect a triple 8 pin? Or just dual 8 pin?
Hi Anthony Saclisi, welcome to my channel, so long your triple 8pin is connected to the strimer plus controller, you can connect to the uni fan with the cable convertor. no issue, as the argb load draws is from your strimer plus controller and not from the uni fan controller.
Followed your vid and bought lian li argb kit.
Connect strimer to al120.. the cable melted. Lol
Hello Mohd Faez Saili, welcome to my channel. pardon me if you burn your uni. did you plug the strimers and daisy chained together with the AL fans? if you did, that might be the cause of it.
@@KleoYani did plug al fans with strimer. but only the cables burned. idk whats wrong.
@@bos0u the issue is over loaded. you might want to know the dos and donts of the uni controller ua-cam.com/video/QQHJUQvKwlY/v-deo.html then try to only plug strimers plus in to a outpout and not join together wiith the AL fans. excample like this will be safe imgur.com/gallery/beYR8CN
does this work without the controller hub or does the striker have to run through it?
Hello Jacob Somers, welcome to my channel. you will need to plug the strimer plus to it's controller to work, as for the uni fan controller, you dont have to plug that useless you want it to control your strimer plus with the L-Connect software.
hi. hope this vid still active. i have a question before i purchase the connector bypassing the other controller, i have 2 controllers, 1 for 120 fans controller and 1 strimers controller. the question is if i can still bypass the other controller to control both strimers and fans. as of now i cant control the strimers. please reply to this. ty
Hi Jm Ocampo, welcome to my channel. If you can control both your uni fan and strimer plus via L-Connect 3. on L-Connect 3, you can by pass and set sync to motherboard, where that is the bypass. lian-li.com/l-connect3/l-connect3-manual-2/ look under quick sync lightings, where it says MB Lighting Sync (enable / disable)
@@KleoYan may L-Connect cant detect the strimers, only the fans thats why i cant customize my strimers
@@jmocampo281 hi, you will need to fix that and do you see the strimer plus controller in your device manager under Universal Serial Bus Devices?
@@KleoYan no, i can see in my device manager.. im thinking if i can ung the connector like in your vid that i can bypass one of the controller which my L-Connect detect in my device manager. do you think thats possible? i have SL-infinity and Strimers controller
i ask because you use other controller which i dont have it
Is it possible to connect Lian Li Strimer cable (not the plus version) with AL Unit fans connector ? I am not getting any reference for it... Just got the info that I need to purchase ARGB cable kit.
Hello Manjeet Singh, as what you have seen in this video, the SL and AL controller have the same layout, you can use this video as a reference and to plug your strimer plus to the AL controller, alternatively, you can also purchase a Strimer plus V2 controller only and it will work with your current Strimer plus stripe too. However if you do that, you will need to use L-Connect 3 application which will also work with the AL Controller.
Hi bro, i watch that part of your vid many times. The cable that is needed to connect to unifan controller. Its a male 5v 3pin to female sm3p correct? The links u put seem to be female 5v 3pin to female sm3p. I wonder sim lim sells it? Cant find it online.
hi J T, welcome to my channel, yup you are right but some of those cables bought online will give you the pins, so it will become male instead of female. SLS does not sell them, unless you crimp them yourself, you will be able to find parts at sim lim tower. Normally I crimp my own cables for neater cable management :) ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
@@KleoYan bro u run a shop or something?
@@einnairo Hi J T, nope I don't run a shop.. PC building is just a hobby to me.
Hey! I'd like to ask if you are able to only use 1 pin of the 8 pin connector
Hello Florko, welcome to my channel. pardon me, am not sure what you mean by using only 1 pin of the 8pin connector?
@@KleoYan I have a single 8 pin gpu and I'd like to use the lian li strimer plus. Is there some way to separate the double 8 pin and only use 1 part of it?
@@florko1931 Hi, I have returned this strimer plus but I believe the actual cable the provides the current. You can remove them from the underside. It goes like this 2 wires before the arbs strip. You can try removing the wires that are right below the argb strips. Please do them gently and not damage the argb strip. Or you can just leave it unplug. Just use one set to plug it in. The other set, just tug it or hide it somewhere. Hope this helps.
@@KleoYan Yes, thank you :)
@@florko1931 you are most welcome. Remember do it gently. All the best in your build 😉
so i bought a 3 pack of 120s SL-infinity fans, 2x 140 sl-infinity fans, one 24 pin strimer and one 12vhpwr strimer. I saw the multiple controllers and freaked out lol. so i need to get the converter, from 3pin argb to 3 pin "fan header" to plug the strimer control box into the fan hub? does that sound right?
Hello lycanwarlord, welcome to my channel, I like to check, is your 24pin strimer plus v1 or v2? if it's v2, you should not be following this content, kindly watch this video ua-cam.com/video/CgvuUFeff8U/v-deo.html
can you do a video on how to used the icue pro with lian li uni fans plus strimers
Hi Cedric, welcome to my channel. I will try to do that if I am able to borrow the commander pro from friends.. No promises though. Once again thank you for requesting and two have visit my channel..
@@KleoYan thank it would nice to see because apparently there is a big thing on redit on how the incue commander pro give better gradients and color over l control.
@@CedricMelbourne I see, still I will have to see if my friends have this unit. hope for your kind understand as this channel is mainly for what I have and what I can share. It's not a sponsored channel nor monetized channel. having to said this, There is someone who have discuss this with me me but he is using Razer Chroma. After some short discussion. He figured his way out and it works for him. Maybe you can take his work as a reference and to apply on icue, but please do it with caution. imgur.com/a/pAciXpg credits to INFERNOdll ua-cam.com/users/ProphetHD1337
@@INFERNOdllYO! welcome back .. you are a life saver, thank you so much INERNOdll .. greatly appreciated.
@@KleoYan completely understand. Thank you for the information you took the time to provide already it’s a great help
I have a striker but they are both the same size and can only fit one of the cords into the control box. How do I do both so I don’t have to have one in MB and other in control?
hi Avery Appleby, welcome to my channel, I dont get what you mean by striker? do you mean strimer plus? if it is, are the strimer plus V2?
I want to make my own adapter but cant seem to find out what each wire is all i know is one wire has a segmented grey line running along it. what wires do i connect?
Hello XL-Combo, welcome to my channel. infact what you need to know is what are the wires for. You come to the right place.. this might help you out :) ua-cam.com/video/Lz90i5ym4Dw/v-deo.html
Hey kleo
Is it possible to use only 1x 8pin cable since my gpu has only 1x 8 pin connector or is the strimer plus gpu cable only for 2x 8pin ?
Hi J J, pardon me, I have returned the strimer plus to the owner of KritcalGaming93, not able to answer you that, but, you don't really have to plug all 2 x 8pin. just plug one 8pin and leave the other at the side. the whole dual 8pin strip will look nicer, I mean this is my opinion cos 8pin is abit too thin. Anyway the choice is yours.
Very Descriptive & Informative! Definitely good content. Subbed! 👍
Hello Ef_Maniac, welcome to my channel and thank you to have subscribe, I have done a couple of content with these set of uni fans which you might be interested. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
Hi, can I use the 24 pin mobo Lian Li Strimer without the controller? Maybe connect it to 3rd party argb controller or using the mobo argb header?
Hi Henry Nightdyne, welcome to my channel, unfortunately no. You will have to use the strimer plus controller.
@@KleoYan Ok, thanks for the info mate
Can I make my own "converter" by splicing one of the ARGB splitter plugs and fan connector from a 3-pack of UNI fans?
Hello Cristian Herrera, welcome to my channel. you mean slice one of the argb daisy chain connector and to replace it with a standard 3pin argb connector. if that's what you are asking, yes. so long you know which is 5v , data in/out and ground.
@@KleoYan Thank you, a video on this would help so many of us out there if you have the time!
@@cristianherrera3913 hi, am so sorry, thought am familiar with the lian li argb products, I have returned the strimmer plus to the owner and as for the uni fans and controller. I do not have any with me either. most of my videos you seen here are all borrowed equipment if not returned equipment. You might be interested in this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html the concept of slicing argb cable is the same method as how I did the white convertor ua-cam.com/video/Lz90i5ym4Dw/v-deo.html and again. please know the limits of the argb if not you might fry your board or even the controllers.
I know this is a stupid question but where do you get that 2 pin to Mobo cable? I got a strimer 24 plus but that didn't come with it?
Hello Danilo Apostol, welcome to my channel. that convertor does not come with it. I did it myself (refer to "Lian Li Uni Fan Controller- Custom Crimp Connectors" of this playlist ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html) or you can buy the lian li argb cable kit.
is the controller irrelevant now bc of L-connect 3 ?
@@miu-choi hi welcome to my channel and yes you are right but if you have these older version strimer plus, you can still purchase a strimer plus v2 controller which allows you to plug the older version strimer plus. This will allow you to make use of the L-Connect 3 app.
I have two graphics cards, so I bought one 24 pin Strimmer and two GPU Strimmers. I only have one Strimmer controller that came with the 24 pin cable. How do I get both of the GPU cables to work? Am I going to need to purchase an additional Strimmer controller?
Hello Zachary McGrew, welcome to my channel. I believe your 8pin argb can be connected to the strimer plus controller. there should be a socket for it. if it's clear, take a picture of your controller with the sockets and sent it to me at godzyla@gmail.com . I will be able to indentify for you. also take picture of your 8pin GPU connectors.
been wanting to get this .. i have all my fans led connected to my ARB motherboard so ive been wanting to use the actual control box itself. my question is. im running a white build. does the controller have the color mode "WHITE" ? bcoz im runnig on white LED on my argb fans which is controlled by the motherboard
Hi Jk Heart, welcome to my channel. If you are talking about the strimmer plus controller, yes you will be able to set it white no issue but it’s only mean for strimmer plus only. If you intent to connect to your fans and I have no idea
Which fans you are using, you will need the uni controller. Btw what fans are you using?
@@KleoYan you have answered my question ., sorry english bad :P haha .. all i wanted to see if there is a white color mode on the strimer plus. thank you
@@Sあkura hi ok. no problem, you are most welcome.
Very well explained 👍👍
Hello i buy tech, welcome to my channel and thank you for your feedback.
What name of converter. Argb 3pin to sm3 or sm4 female?
Hi Bazil Salihin, welcome to my channel, do a search with "argb 3pin Male to 5v JST SM3P"
www.ebay.com/itm/133521646617?hash=item1f1682a419:g:nnUAAOSwB~BfYx4O
Hi,
Is the output port of Lian Li control box working?
Could you please try bro?
Hello LunGYed Channel, welcome to my channel. It is working as shown in this video.
@@KleoYan Thank you, you are so lucky haha.
@@lungyedchannel274 you are most welcome.
After I have applied this instruction 8:05 and use the motherboard RGB header my controller Burnt 💔💔💔 , everything I have applied as per your instructions 💔💔💔 please advise if I can order the controller only with out having to by everything 💔💔💔😭😭😭
Hello Yusuf khalifa, welcome to my channel. If you burn your Strimer controller, there is no way to purchase, you will need to contact lian li for a replacement as for the uni controller. there is a way to purchase it if your region allows you to purchase item from platform Tabao (from China), else you will need to rma the unit with Lian Li.
@@KleoYan I have contacted BARROW Lodz Store in aliexpress and they send me a replacement for 11 $ 😅 I am relieved, I wouldn't do any test again I almost set My gamming pc of fire after attempting to control lian li strimer on the motherboard .. 😅
@@MrYusuf-zy4tl hi, good to hear that. Have you find out what went wrong which burned your unit? By the way is always a practice to do minor steps as in connect one at a time to the outputs and always double check what you are connecting. All the best in your build 👍
Where I can find the control about RGB light of LIAN LI ?
Hi Buenosz, welcome to my channel but do pardon me. I don’t quiet understand what you meant. Can you explain in details thank you.