Thank you all so much for watching! I recently released some merch through teespring and it would mean a lot if you could check it out and comment to let me know what you think. Also if you have any suggestions feel free to reply as well. Link: builds-with-v.myteespring.co
I also just orderd these to my GPU and and the 24-pin to my new build cuz of your video, great to know that you dont ”have” to plug it into the motherboard but instead just run it with the little controller that came with it, cuz my motherboard would’nt have had enough RGB-Headers:)) so thx alot, i owe you a subscription :P
Thanks for the super video. You’re a lifesaver. This is one of the best RGB installation videos that I have ever seen, so thanks again...... keep up the great work.
You saved me with your video, I'm Brazilian, I was looking for videos like yours in several places, you taught that if we use the board vertically, we should invert the RGB side, and that's what I was looking for, thanks, I already liked it !
You gained a sub simply because no PC build tutorial could help me find where to connect my SATA cable 😂 but your random video that showed up in my recommendations did !!
Thank you so much for this video! It’s extremely well-made. I had two quick questions: 1. Can you skip the ARGB cable and only have the SATA plugged in if your motherboard does not support ARGB? 2. If your GPU has a single 8-pin port, can you remove half of the cables and reposition the remaining to be in the center of the LED strips? Thanks!
Thanks so much. Yes you can plug in only the sata cable and everything will work and yes you can move the 8-pin to be centered and only use half of it.
I just got these and installed them today. Thanks for making this video as it helped me flip around the RGB cable for my GPU. I had no trouble getting the 24 pin to work, but couldn't figure out why my triple 8 pin cable was backwards and how to fix it without breaking anything. It's all back together and looks awesome. Good luck to anyone else installing these, it's worth it if you are an RGB enthusiast.
@@MORENO_ROG3 It has all the standard LED colors and several different patterns. White is an option and for each color you can choose a pattern, the speed of that pattern and the brightness. This is if you use the controller that comes with the strimers. You can also connect it to your motherboard and control it through software which should allow you to make your own custom color, although at the cost of using the excellent patterns that are designed explicitly for the strimers.
Bro thanks for the video! I bought the products LITERALLY after finishing you video. I had a lot of doubt about the compatibility, but thanks to your efforts on this video, I have 0 questions in my mind right now. Also horizontal vs vertical cpu cable part was very useful, i will change my vertical gpu to the horizontal one. Thanks again!
Thanks for the help. Everyone else just shows them working, we know what they look like and bought them because of that. Its nice to see how they hook up and options of hooking them up..
Most detailed and informative video, yet simple to understand. Amazing job, mate. Thank you for showing both the controller and software side of thigs.
Amazing video, however with the controller being inside my case, hard to access it for the buttons so even though it is better, I can imagine using the MOBO software would be far more convenient.
Thanks for the video guide of flipping the connectors - made me realise i want to get this working with my factory PSU Cables so i can avoid extensions but keep the lighting :D
Another great video, now, don’t slow down 😁 I am a little confused. You stated that you can simply connect the SATA for power, and you made it seem like there was no need to connect ANY of the RGB cables. But, if you did not, you would not be able to control any of the lights/colours, right? Or would that simply be done via the controller?
Thank you 🙏 so the only cable needed is the sata power cable. The lighting is controlled with the controller. Optionally you can also connect the addressable RGB cable so you can switch from controller to software control (if you wanna mess with more lighting effects).
Hey man, dude video! I recieved the cables aswell today for my build in the Lian Li o11 xl my case when the gpu connectors x3 8pin working? (waiting 3090)
THANK YOU! I didn’t know the rgb came off of the cables! know thinking back i’m dumb, but sitting here at nearly 1 AM trying to figure out if 180 degree adapters are the move. i have an EVGA 3080 and it has a 24 pin, but lian li has a 24 pin one, but ever since i got it i had to make it weird since it has standard pins the have the clip at the bottom. thank you sir!
Hello! Thanks for your video, very helpfull! That extra cable you showed for the 8-pin cable was the answer I was looking for haha I'm getting the 8-pin only. Thanks!
Man I swear during the whole video I though Matt Daemon was explaining to me how to plug strimer plus V2 😂😂 Your voice and the way you talk is just exactly the same it's crazy
Great video ! I’m going to buy some ASAP. I just bought 1,000 dollars worth of RGB Corsair QL Fans and now I need these cables. Your Build looks good. Mine’s gonna have 14 case fans with a mix of 120mm,140mm & 200mm RGB Fans. It’s going to look like the Sun. I have an Aorus z590 Mobo with 9 fan headers so will use splitters or whatever it takes to put all these fans inside. Push pull on the NZXT 360 Radiator. View 51 TG Snow case has tons of room and lots of space in the back to hide the cables.
That’s going to look amazing! Thanks for sharing and if you don’t mind sharing a photo of the build when it’s setup feel free to dm me on Instagram @buildswithv
I came here hoping you’d demonstrate flipping the cables. Thanks man. I have these on my Strix OC 2080ti that has the clips facing up. On my other rig I have a EVGA 3080ti and it has the clips facing down. Now I know how to to flip it. I wish I could control these with iCue.
Great vid, wanted to double check to see where I had to put the controller because I think it’s annoying that you have to take your case panel off to change the color
On my most recent build I stuck it inside my case with some adhesive. It’s easier than taking the back panel off since I don’t have to move the pc to take the front panel off but i can’t find a better spot
the laugh on the end when says ; i know allot of people dont care for rgbs but (then the laugh) i do , had me laughing so hard cuz i can relate 100% to that xD thx for the vid and information :)
I will make my build now that i got everything delivered but this just caught my eye! I am new to PC building and want to use these strimers for both my GPU(MSI SUPRIM X 4080/Corsair HX1000i PSU 2022) and MSI WIFI EDGE Z790 - Is it compatible? if not what variant should i go for ? I am really lost.. appreciate it!
Great video man! FYI Lian li do have their own software for the strimmer and fans called L-Connect 3. You can control all cables and fans through that software,
I'm trying to figure out how I'm going to use this table on my upright GPU mount in the Lian li Evo case I don't think there'll be a way to use this cable
At 7:41 you show a cable that is not included in the 8 pin connector box. I got a 3 pin connector but not the same as you are showing, the one that came with mine was a black cable that is attached the RGB lights. Please let me know If I need to return for a new one or if I am missing something (im new to PC building)
In the 8-pin box there should be a 3-pin addressable RGB that connects from the cable that is attached to the RGB cable to your ARGB port on your motherboard. If its missing I would definitely request a exchange. Unless you are using the module that came with the 24-pin cable. Then you'd be okay.
@@BuildsWithV Okay thanks, the only 3-pin connector I got didn't attach anywhere on my motherboard after about 20 minutes of looking. Going to reach out and see if I can exchange it! Thanks!
Hey V, just had a quick question. At 3:20 I see you can completely remove the RGB element from the included cables, can you also do this on the 24 pin cable? I wanted to remove the included cables and just attach the RGB part to my custom sleeved cables. Ps - great informative video - keep up the good work!
I believe the 24-pin can also be completely taken apart. The reason I say “I believe” is cause I haven’t actually tried it but the cables seem to both be made the same way. I’d assume the 24-pin is also able to be flipped because some motherboards would need it flipped. Thank you so much 😊
Hello, I have one question.,Maybe you can answer on it? My case is MATREXX 70 ADD-RGB 3F. I just need to know, if I can connect this to the DeepCool A-RGB splitter. I have biunch of A-RGB fans and my motherboard have 2x A-RGB (3-pin) header. SO I have two bunch of A-RGB fans for those two A-RGB headers. I just need to know, may I connect this LIan Li STrimer PLus to my A-RGB case splitter and use it synced with my other A-RGB fans?
I’m trying to connect the 8 pin to my gpu( rtx 3060 xc) however there’s a piece hanging out should I be worried about that or is it fine as it is. Alsoonce I get the software after building the pc can I no longer use the remote to change colors and patterns or do I neeed to keep it mounted somewhere in my build
The 2 pins that hang out are perfectly fine over there or you can tuck them away. The controller does still have to be plugged in but once you switch to software you won’t need to mess with the controller anymore
@@BuildsWithV okay and one more question if you don’t mind; this is my first time building a pc so I am really lost when it comes to where wires gets plugged into the mobo where exactly does the wires for the remote getting plugged into the mobo for ex does 1 go into the piece that says rainbow
To get power for the 24-pin unfortunately you have to plug in the sata cable. Idk why they did it this way. For the 8-pin you can use only your motherboard power
did you plug the 2 8pin pcie one directly into an argb header on the mobo or the argb hub/splitter? or did you plug it into the included lian li controller, and then take its argb wire and plug it into either one of those? because on their website it says not to plug into a splitter and must plug it directly to the motherboard.
Hi, please help, in 1:02 when you say : you can use this with only an 8 pin ... i have a GPU with only 8 pin, so, if i connect only 8 pin, will the rest of strimmer works ? in my opinion if i connect only 8 pin, then only those connected will be lighted, not the rest, can you please confirm and give me more infirmation please ? my gpu is Sapphire 5500 XT, thank you
@@BuildsWithV thank you very much, you are really helpful, so you are saying that even if i let some pins handle without being connected to gpu, they will still light up ? thank you very much and please make another video, you explain very well, sub and like
![Lian Li Strimer Plus - To use on Uni Fan Controller [L-Connect]](/img/n.gif)
Thank you all so much for watching! I recently released some merch through teespring and it would mean a lot if you could check it out and comment to let me know what you think. Also if you have any suggestions feel free to reply as well. Link: builds-with-v.myteespring.co
Did you buy 2 lian li RGB just like in this video ?
@Haziq Kel don't buy it bc it's junk bc it's doesn't ever work on Asus motherboards
@@justinedge5061 I’ve used it on Asus motherboard and it worked just fine
Thats so true
this is probably the simplest but most informative video I've ever watched, this is an amazing video!
Wyatt Taylor Thank you so much 🙏
Agreed, simple but great way to show how the controller work with split screen👌🏼👏🏼
I also just orderd these to my GPU and and the 24-pin to my new build cuz of your video, great to know that you dont ”have” to plug it into the motherboard but instead just run it with the little controller that came with it, cuz my motherboard would’nt have had enough RGB-Headers:)) so thx alot, i owe you a subscription :P
@@wagecuckwojak2394 Nice! Yeah I like how they gave us more than just one option. I appreciate it 🙏 Thank you
@@BuildsWithV thx again for the review! 🙏🏻
perhaps the most detailed and clearly explained video I came across in pc building
Nive work V keep it up :)
Thank you so much 😊
Don't get around much?
Wow I been looking on how to install these. Didn’t know you can just plug them into the PSU cables. Thank you so much for making this video! I subbed!
Glad this helped. Thank you for watching and the sub 😊
Does that mean they don’t need the sata cables?
"These cables come with the cables"
*hmm yes, the cable here is made of cable*
(Not hating btw this vid was good)
😂😂😂 Made my day. Thanks for watching 😊🙏
lmao
Bruh I thought the exact same thing... haha awesome. Nice video though, ofc I'm watching my pc on the desk. Looks cool xD
Thanks for the super video. You’re a lifesaver. This is one of the best RGB installation videos that I have ever seen, so thanks again...... keep up the great work.
Thank you for the vertical GPU instructions, the in box slip doesn’t do that great a job!!
You saved me with your video, I'm Brazilian, I was looking for videos like yours in several places, you taught that if we use the board vertically, we should invert the RGB side, and that's what I was looking for, thanks, I already liked it !
This video was amazing & incredibly helpful! Appreciate the work you put into this & the detail you went through for it!
Happy I could help 😊 Thanks for watching 🙏
Thank you! I started my rgb journey but I got hella confused, after this now i got the basic understanding now. Thanks again.
Noon m That’s great! I’m glad I could help. Thank you for watching 🙏
Im still confused what if you have 1 8 pin port and 1 6 pin port on your gpu
@@gabrielsummerfield3182 just plug in the 8 pin and then only plug in 6 pin. Leave 2 pins unplugged.
This is exactly what I was looking for, thanks for putting this together.
Awesome! Glad I could help 😊 Thank you for watching
You gained a sub simply because no PC build tutorial could help me find where to connect my SATA cable 😂 but your random video that showed up in my recommendations did !!
That’s awesome! I’m glad it helped you out 😅 Thank you for watching and the sub 🤘
Thank you so much for this video! It’s extremely well-made. I had two quick questions:
1. Can you skip the ARGB cable and only have the SATA plugged in if your motherboard does not support ARGB?
2. If your GPU has a single 8-pin port, can you remove half of the cables and reposition the remaining to be in the center of the LED strips?
Thanks!
Thanks so much. Yes you can plug in only the sata cable and everything will work and yes you can move the 8-pin to be centered and only use half of it.
If your mobo doesnt support argb then.... whats the point of buying an argb cable extension? you will pay premium for a simple cable extension
@@ravell2854some mobos don’t have the 5v argb plug, only the 12v which is what he probably means , I have the same issue.
Literally the first video i’ve come across that is actually informative and straight to the point!
Glad I could help 😊 Thanks for watching 🙏
I just got these and installed them today. Thanks for making this video as it helped me flip around the RGB cable for my GPU. I had no trouble getting the 24 pin to work, but couldn't figure out why my triple 8 pin cable was backwards and how to fix it without breaking anything. It's all back together and looks awesome. Good luck to anyone else installing these, it's worth it if you are an RGB enthusiast.
Can you put white color or any custom color
@@MORENO_ROG3 It has all the standard LED colors and several different patterns. White is an option and for each color you can choose a pattern, the speed of that pattern and the brightness. This is if you use the controller that comes with the strimers. You can also connect it to your motherboard and control it through software which should allow you to make your own custom color, although at the cost of using the excellent patterns that are designed explicitly for the strimers.
Bro thanks for the video! I bought the products LITERALLY after finishing you video. I had a lot of doubt about the compatibility, but thanks to your efforts on this video, I have 0 questions in my mind right now. Also horizontal vs vertical cpu cable part was very useful, i will change my vertical gpu to the horizontal one. Thanks again!
Really great video man! I love how well you explain everything and straight to the point 🍻
Thank you so much 🙏
I like that you took the time to go through all type of connections offered. Great stuff!
Glad it was helpful! Thanks for watching 🙏
Thanks for this, wasn’t sure how to flip the cables around on the 8 pin
You’re very welcome, thank you for watching 🙏
Thanks for the help. Everyone else just shows them working, we know what they look like and bought them because of that. Its nice to see how they hook up and options of hooking them up..
You're very welcome! Thanks for watching 🙏 Those reasons are some of the main reasons I started this channel
Most detailed and informative video, yet simple to understand. Amazing job, mate. Thank you for showing both the controller and software side of thigs.
gatta love ppl like this guy that respect someones time great vid
I’m glad I could help out 🙌 Thanks for watching 🙏
Amazing video, however with the controller being inside my case, hard to access it for the buttons so even though it is better, I can imagine using the MOBO software would be far more convenient.
Awesome video! I was really confused on how to install these to my build until I watched this 👍👍
Glad I could help! Thank you for watching 🙏
Thinking of getting these but I gotta upgrade my motherboard first. Currently rockin a old budget asus h310.
Thanks for the video guide of flipping the connectors - made me realise i want to get this working with my factory PSU Cables so i can avoid extensions but keep the lighting :D
Another great video, now, don’t slow down 😁 I am a little confused. You stated that you can simply connect the SATA for power, and you made it seem like there was no need to connect ANY of the RGB cables. But, if you did not, you would not be able to control any of the lights/colours, right? Or would that simply be done via the controller?
Thank you 🙏 so the only cable needed is the sata power cable. The lighting is controlled with the controller. Optionally you can also connect the addressable RGB cable so you can switch from controller to software control (if you wanna mess with more lighting effects).
Really helpful and informative video. This made my installation a breeze. Thank you
Glad it helped! Thank you for watching 🙏🙏
Where I'm kinda confused is the rgb splitter.. do i need that to get the strimmer plus to work?
Yes, I have the same problem. I connect it to a splitter. It makes all my other RGBs does not light up.
Nice work showing both gpu positions. No one else does this !
Hey man, dude video! I recieved the cables aswell today for my build in the Lian Li o11 xl my case when the gpu connectors x3 8pin working? (waiting 3090)
Thank you 😊 Yes it will still work no problem but you’ll have to plug in one regular 8-pin since these only have 2 8-pins.
@@BuildsWithV SO they take 2 slots in the PSU? Because my GIGABYTE 3090 only takes two 8 pin. So i can get this!
@@vednar99 yes this will work no problem
Great video my dude! And incredibly helpful for folks that are new to this stuff.
Glad I could help 🙌 Thanks for watching 🙏
Look at that fricken rats nest. I have one of my own. Can't wait to pick up some of these for myself.
thank you i have been looking for these for forever
THANK YOU! I didn’t know the rgb came off of the cables! know thinking back i’m dumb, but sitting here at nearly 1 AM trying to figure out if 180 degree adapters are the move. i have an EVGA 3080 and it has a 24 pin, but lian li has a 24 pin one, but ever since i got it i had to make it weird since it has standard pins the have the clip at the bottom. thank you sir!
Hello! Thanks for your video, very helpfull!
That extra cable you showed for the 8-pin cable was the answer I was looking for haha
I'm getting the 8-pin only.
Thanks!
Nice! Glad I could help 🙌 Thanks for watching 🙏
I was stuck between these and the xpg. Thanks for clearing the choice up!
Glad I could help 🙏
This is probably the best tutorial on youtube, thank you 🙇
Thank you 🙏 Means a lot!
Great video man, exactly what I needed to see.
Glad I could help 🙌 Thanks for watching 🙏
This really really helped me take a part the strimer and reverse it for my vertical mount
Den trying to do mine for 4 hours now it’s so stressful
Man I swear during the whole video I though Matt Daemon was explaining to me how to plug strimer plus V2 😂😂
Your voice and the way you talk is just exactly the same it's crazy
That’s pretty cool 😅 never thought about that
Bro keep up this awesome content and u will make mad $, u have my support
Thank you so much 🙏🙏🙏
I watched many tutorials and this helped the best thanks!
So glad I could help! Thank you so much 🙏🙏
Great video. Thank you so much! Will definitely be buying the cables and those fans!
Thanks so much 🙏 Great combo of parts for some really nice RGB! Thanks for watching
This video is amazing thank you soo much I was scared to do something wrong but you helped me thank you
Lot of tnx buddy!! salute from Spain!
You’re welcome and thank you for watching 🙏😊
Quality video! Thanks, will rewatch.
This saved my life-- thanks so much for all your hard work on this! Doing God's work for a PC dork like me! :-)
Awesome! I appreciate that 🙏
Thank you for the detailed instructions on how to use this cable.
flawless video man
Great video ! I’m going to buy some ASAP. I just bought 1,000 dollars worth of RGB Corsair QL Fans and now I need these cables. Your Build looks good. Mine’s gonna have 14 case fans with a mix of 120mm,140mm & 200mm RGB Fans. It’s going to look like the Sun. I have an Aorus z590 Mobo with 9 fan headers so will use splitters or whatever it takes to put all these fans inside. Push pull on the NZXT 360 Radiator. View 51 TG Snow case has tons of room and lots of space in the back to hide the cables.
That’s going to look amazing! Thanks for sharing and if you don’t mind sharing a photo of the build when it’s setup feel free to dm me on Instagram @buildswithv
bro thanks for showing how to handle those things with vertical mount! btw - i am too sitting at my desk all the day watching my pc 😀
a very specific video that helps a lot! thank you so much C:
Glad it help 😊 Thank you for watching 🙏
Im buying one soon , amazing tutorial! Subbed
Nice! Thank you so much 🙏
Really good install instructions! Thanks!
You are very welcome 🙏 Thanks so much for watching
I came here hoping you’d demonstrate flipping the cables. Thanks man.
I have these on my Strix OC 2080ti that has the clips facing up. On my other rig I have a EVGA 3080ti and it has the clips facing down. Now I know how to to flip it.
I wish I could control these with iCue.
Great vid, wanted to double check to see where I had to put the controller because I think it’s annoying that you have to take your case panel off to change the color
On my most recent build I stuck it inside my case with some adhesive. It’s easier than taking the back panel off since I don’t have to move the pc to take the front panel off but i can’t find a better spot
Excellent video. I love detailed videos like this.
Awesome, Thank you for watching 🙏
Everything I wanted to know thanks for the great video
awesome and informational vid, keep up the great work :)
Thank you 😊
great vid, love the rgb ram looks tropical love it.
Thank you so much 😊 and thanks for watching 🙏
I love all the Rgb in your system
Thank you 🙏
Thank you!!!!! I needed this explanation
Glad I could help out 🙏🙌
the laugh on the end when says ; i know allot of people dont care for rgbs but (then the laugh) i do , had me laughing so hard cuz i can relate 100% to that xD
thx for the vid and information :)
You are my hero, thx for the Video :)
The only helpful video. 🎉thanks bro
@@BlackStarSeries appreciate that 🙏 thank you
This video gave me all the answers. Thank you so much
You are very welcome 🙏 Glad I could help
Thx for the Video !👍
this video answer multiple questions i had and even some i didn't even think of
I’m glad this helped! Thank you for watching 🙏
GREAT VID MY GUY!!!
Thank you 🙏
Great video. That's my RGB sorted now, and yes, I am like you. I do stare at my PC. :D
Can you use the lead shown at 10:00 to connect to Corsair products to use with icue
I will make my build now that i got everything delivered but this just caught my eye! I am new to PC building and want to use these strimers for both my GPU(MSI SUPRIM X 4080/Corsair HX1000i PSU 2022) and MSI WIFI EDGE Z790 - Is it compatible? if not what variant should i go for ? I am really lost.. appreciate it!
Awesome cable management 😁😁😁
Thank you! Helped a lot!
Great video man! FYI Lian li do have their own software for the strimmer and fans called L-Connect 3. You can control all cables and fans through that software,
Bro my motherboard don't have argb header any solution are there for me
nice review it`s very complete! thank you
Awesome! Thanks for watching 🙏
Very informative, keep it up 👍
Thanks so much 🙏 Will do
You are cruel.. your video is so good that it made me buy this LOL
😂 Well I’m glad I could help out. It’s gonna look 🔥
I'm trying to figure out how I'm going to use this table on my upright GPU mount in the Lian li Evo case I don't think there'll be a way to use this cable
At 7:41 you show a cable that is not included in the 8 pin connector box. I got a 3 pin connector but not the same as you are showing, the one that came with mine was a black cable that is attached the RGB lights. Please let me know If I need to return for a new one or if I am missing something (im new to PC building)
In the 8-pin box there should be a 3-pin addressable RGB that connects from the cable that is attached to the RGB cable to your ARGB port on your motherboard. If its missing I would definitely request a exchange. Unless you are using the module that came with the 24-pin cable. Then you'd be okay.
@@BuildsWithV Okay thanks, the only 3-pin connector I got didn't attach anywhere on my motherboard after about 20 minutes of looking. Going to reach out and see if I can exchange it! Thanks!
Great video ! Thank you kindly 👌
Thanks so much 🙏
awesome video buddy
Thank you 🙏
Great guide! I was considering these cables but i got treated to a good explanation on RGB instead!
Nice video dude
great video man 🙌🙌
Appreciate it! Thank you for watching! 🙏
Second secret ending of Cyberpunk2077, V ends up as an influencer supporting the corps selling their products :)
Hey V, just had a quick question. At 3:20 I see you can completely remove the RGB element from the included cables, can you also do this on the 24 pin cable? I wanted to remove the included cables and just attach the RGB part to my custom sleeved cables.
Ps - great informative video - keep up the good work!
I believe the 24-pin can also be completely taken apart. The reason I say “I believe” is cause I haven’t actually tried it but the cables seem to both be made the same way. I’d assume the 24-pin is also able to be flipped because some motherboards would need it flipped.
Thank you so much 😊
Hello, I have one question.,Maybe you can answer on it? My case is MATREXX 70 ADD-RGB 3F. I just need to know, if I can connect this to the DeepCool A-RGB splitter. I have biunch of A-RGB fans and my motherboard have 2x A-RGB (3-pin) header. SO I have two bunch of A-RGB fans for those two A-RGB headers. I just need to know, may I connect this LIan Li STrimer PLus to my A-RGB case splitter and use it synced with my other A-RGB fans?
great content keep it up!
I’m trying to connect the 8 pin to my gpu( rtx 3060 xc) however there’s a piece hanging out should I be worried about that or is it fine as it is. Alsoonce I get the software after building the pc can I no longer use the remote to change colors and patterns or do I neeed to keep it mounted somewhere in my build
The 2 pins that hang out are perfectly fine over there or you can tuck them away. The controller does still have to be plugged in but once you switch to software you won’t need to mess with the controller anymore
@@BuildsWithV okay and one more question if you don’t mind; this is my first time building a pc so I am really lost when it comes to where wires gets plugged into the mobo where exactly does the wires for the remote getting plugged into the mobo for ex does 1 go into the piece that says rainbow
Super helpful!!
Howe do I know if I wich sata cable is the right one? Pls help
Ok one question the 8 pin is for the gpu and the 24 pin is for the motherboard?
That is correct
@@BuildsWithV ok thanks
Nice video 💪🏼👌🏽💯❤️
Is it possible to not plug in the sata cable and just control through your motherboard the rgb through the motherboard app?
To get power for the 24-pin unfortunately you have to plug in the sata cable. Idk why they did it this way. For the 8-pin you can use only your motherboard power
Thank you 🎉
did you plug the 2 8pin pcie one directly into an argb header on the mobo or the argb hub/splitter? or did you plug it into the included lian li controller, and then take its argb wire and plug it into either one of those? because on their website it says not to plug into a splitter and must plug it directly to the motherboard.
Hi, please help, in 1:02 when you say : you can use this with only an 8 pin ... i have a GPU with only 8 pin, so, if i connect only 8 pin, will the rest of strimmer works ? in my opinion if i connect only 8 pin, then only those connected will be lighted, not the rest, can you please confirm and give me more infirmation please ? my gpu is Sapphire 5500 XT, thank you
The whole cable will still light up no matter how many pins are plugged in. The rgb portion is totally separate from the cables itself.
@@BuildsWithV thank you very much, you are really helpful, so you are saying that even if i let some pins handle without being connected to gpu, they will still light up ? thank you very much and please make another video, you explain very well, sub and like
@@ramichalbi8904 yeah they will light up and still work perfectly
@@BuildsWithV you are Genius thank you, i perchased them yesterday and will recive them next week , yessssss
So you need to flip these cables when using vertcal gpu `? Also what software do you use to set the colours ?
Just depends on how your GPU connectors are facing. Some face down and some are flipped.