Share Your Mods Here: discord.gg/VB6ruBEnsm Post Notes / FAQ: - I opted for the bottom location because I want to keep original function, and because it looks cleaner - You can use what you learn in this video, to do it anywhere else on the PSP - Yes I will have a video on how to do it with other models in the future - I will be trying out the replacement of the Mini USB port and / or the IR sensor. - It's not perfect in the video as its cracked slightly because it was done during the experimental phase to showcase the best way to get it centered Plans: Next Mod Videos Will Have To Be HDMI & Battery Testing Video ( Going To Need Full Focus & All My PSPs Running 24/7 ) In the meantime I will probably try to upload something lite. o_0
Honestly if the original PSP's charger wasn't so long, I would probably do this mod. I just see no point for myself who normally just plays at home and doesn't mind plugging it in when it dies lol. You made the mod look super easy tho!
I agree, I honestly have no problem with the original cable & port, much prefer it over microusb, I got plenty of spares, battery is long enough to not care for my use, its just a nice have type of thing of a project lol
I'd love to see a 3d-printed adapter that could simply replace the yellow connector and allow (or provide) physical support for a USB-C terminal. Frankly I'm surprised no one's developed one yet, as it would be a really clean way to do it while eliminating a now-unused connection.
Keen to see how that power delivery port works! I also bought some needle files to fine tune the port, it's definitely better than trying to melt the hole or using a dremel! I am surprised you are doing this on original shells though, as quite a few members of the community complain if an OG shell is altered damaged, and a third party shell is good for practicing. A friend of mine also made a 3D printed faceplate that goes around the front of the USB C port. You bring the port out 1mm proud and can glue on this face plate and it hides the hole. It makes the port sit slightly proud but in my opinion it looks quite good. Another alternative is to plug something into the USB and use a very fine RTV silicone with a needle applicator to fill in the gaps around the port, then you smooth off the silicone with a cotton tip/qtip
@@TotalKommando It would be good to see how you approach this for a 2000 or 3000 especially if you leave the original port and splice in a new one. I'm busy investigating that right now
"And I thought: What am I doing with my life? And went to bed." 😂😂😂😂 that was hilarious. Awesome video and funny. Gets a sub from me bud🎉 Keep up the info and comedy 👍
9:51 For your 2nd soldering guide, please experiment on trying to swap that mini-usb to usb-c. Ever since I got a psp decades ago, I feel having the cord at the bottom hinders while playing. If the USB-C is at the top, you could solder the data lines + power from the bottom as well.
@@TotalKommando LOL first time hearing those exists, but yea I don't think anyone will use any of those ever again since phones exists. Please do! I will follow your footsteps since you will be the first ever on youtube/internet that does it. I'm not brave enough.
@TotalKommando thanks for the reply, love your vids and passion for the psp! the pspi 6 looks like a great project to keep the psp alive 💯 hope to see more content!
Nice modification but I won't do it. I'm fine with the original port since I don't play much :(, but at least I get the links to buy those tools that do help me. 😁😁😁
iirc the psp 1000 has a IR sensor on the top that is unused (except for some homebrew applications) and the IR port is roughly the same shape and size of a usb-c port. Might be a good alternative location.
@@TotalKommando Lots of modders use it for a HDMI out mod though now that i think of it. that poor IR sensor port gets used for just about everything except IR applications XD
@TotalKommando yeah, with the video out on the 2000 and 3000 it's not all that required. Though I can see why some would want to implement a video out on the 1000, and the placement of the cable is a far improvement in the mod over the official one, comfort wise at least. I look forward to your video covering it as I am curious what aspects you dislike about the mod.
Waiting for the upcoming video with a USB-C port o PSP incorporating more functions as you said in this video. In the end, you left the original charging port not connected, right?
Yea cant wait to get into that project, in the end of the video for the "Solderless" method I did leave the charging port not connected, but since then the psp is left in parts. Once I do it again, I plan to keep the original charging port function as I still want it to work like stock on old accessories : ) I want to add function, not remove as much as possible
Yea you can adapt the methods learned here to use on other models. The only thing you will have to figure out is where to exactly cut to end with a clean result. I will have shorter quick videos for other models once I do them.
Brother can you tell me where I get psp street glass lens.. AliExpress have only 1000-3000 model. There is no psp street glass...so where I get it.. please send me a link .
@@TotalKommando Oh I see...but I saw in your video the street glass was cutted tow times. where psp 3000 model glass are not same..will 3000 glass fit on street model.?
Yea ended up being more complicated than expected lol You could get the little adapter but you will have to remember to take it with you at all times, could be lost I may give the side USB idea another attempt for the sake of simplicity, but its placement is not optimal.
I mention in this video, my goal is to keep original function, but yes you can do it, I just don't like how it looks and requires heavy modification to the case. You can use what you learn in this video to do it anywhere else you want.
Yes, you can do this too (you can even find a video on this modification on UA-cam), but it doesn’t look very good. Therefore, the option in this video is one of the most optimal
The Solution is looking for a Problem 😂😂, man i really appreciate you trying it but that original charging port is already 360 Rotatable , much reliable than 2 sided usb C,
Way more complicated than it needs to be with that you've done just for charging a psp with usb c. People are going to destroy their psp like the way you've done. I wouldn't recommend following this. 😢
![[ENG SUB] 2021 Ultimate PSP - Bluetooth, wireless charging, C-type port mod](http://i.ytimg.com/vi/JgzXKPQEBn4/mqdefault.jpg)
Share Your Mods Here: discord.gg/VB6ruBEnsm
Post Notes / FAQ:
- I opted for the bottom location because I want to keep original function, and because it looks cleaner
- You can use what you learn in this video, to do it anywhere else on the PSP
- Yes I will have a video on how to do it with other models in the future
- I will be trying out the replacement of the Mini USB port and / or the IR sensor.
- It's not perfect in the video as its cracked slightly because it was done during the experimental phase to showcase the best way to get it centered
Plans:
Next Mod Videos Will Have To Be HDMI & Battery Testing Video ( Going To Need Full Focus & All My PSPs Running 24/7 )
In the meantime I will probably try to upload something lite. o_0
Honestly if the original PSP's charger wasn't so long, I would probably do this mod. I just see no point for myself who normally just plays at home and doesn't mind plugging it in when it dies lol. You made the mod look super easy tho!
I agree, I honestly have no problem with the original cable & port, much prefer it over microusb, I got plenty of spares, battery is long enough to not care for my use, its just a nice have type of thing of a project lol
Man I’m loving your psp modding series! Amazing quality videos
Thank you, I put my heart and soul into them
I'm so excited with how you've managed this project. I definitely will love to see the USB PD with audio and data.
I'd love to see a 3d-printed adapter that could simply replace the yellow connector and allow (or provide) physical support for a USB-C terminal. Frankly I'm surprised no one's developed one yet, as it would be a really clean way to do it while eliminating a now-unused connection.
Will get there once I take my long vacation
No psp's were harmed in this video 💀
Looks clean. RIP to the fallen 🙏
Salute
/0
|\
/\
Keen to see how that power delivery port works!
I also bought some needle files to fine tune the port, it's definitely better than trying to melt the hole or using a dremel!
I am surprised you are doing this on original shells though, as quite a few members of the community complain if an OG shell is altered damaged, and a third party shell is good for practicing.
A friend of mine also made a 3D printed faceplate that goes around the front of the USB C port. You bring the port out 1mm proud and can glue on this face plate and it hides the hole. It makes the port sit slightly proud but in my opinion it looks quite good. Another alternative is to plug something into the USB and use a very fine RTV silicone with a needle applicator to fill in the gaps around the port, then you smooth off the silicone with a cotton tip/qtip
I cant wait to get back into 3D printing, got so many ideas in mind I wanna design for. I have a graveyard of 1000 models with non mint parts, lol
@@TotalKommando It would be good to see how you approach this for a 2000 or 3000 especially if you leave the original port and splice in a new one. I'm busy investigating that right now
Plz hit like and comment, I heard from a goose that it really helps
Goose Wayne?
"And I thought: What am I doing with my life? And went to bed."
😂😂😂😂 that was hilarious.
Awesome video and funny.
Gets a sub from me bud🎉
Keep up the info and comedy 👍
9:51
For your 2nd soldering guide, please experiment on trying to swap that mini-usb to usb-c.
Ever since I got a psp decades ago, I feel having the cord at the bottom hinders while playing.
If the USB-C is at the top, you could solder the data lines + power from the bottom as well.
It might be on a third attempt lol
I don't like removing original function if I ever want to use an OG accessory but will def be looking into it
@@TotalKommando
WHY?! The only notable OG accessory is RCA cable which uses the 3.5mm jack.
The mini USB is useless! Swap it please!!
@@jackipiegg lol what happened to the camera or gps or tv modules : )
I will still attempt it nevertheless so dont you worry
@@TotalKommando
LOL first time hearing those exists, but yea I don't think anyone will use any of those ever again since phones exists.
Please do! I will follow your footsteps since you will be the first ever on youtube/internet that does it. I'm not brave enough.
interested in the soldered version for data! also would you be able to make the Pspi 6 mod work with it?
Yea once PSPi is available for ordering again, and im done doing project smokey mods (which includes the USB data mod) I will do PSPi Mods as well : )
@TotalKommando thanks for the reply, love your vids and passion for the psp! the pspi 6 looks like a great project to keep the psp alive 💯 hope to see more content!
Nice one! Thanks for the tutorial! I’ve just sub to your channel.
Thank You : )
Broooo i'm waiting sleepless for that usb-c with smart port, data lines and audio, sweet Jesus!
Imagine those fast transfer speeds, daaayum!
transferspeeds are going to be the exact same usb 2.0 lol
@@TotalKommando 😞
@@TotalKommando would it be possible to fast charge if you add a pd65w fast charging module?
I'm in my most sane moment jajaja
@@angrakamelot perhaps if one can add a dedicated second charging module that you have to disconnect via switch to do pd lol
Nice modification but I won't do it. I'm fine with the original port since I don't play much :(, but at least I get the links to buy those tools that do help me. 😁😁😁
nice job sir/man/dude! i might try this out one day
One day indeed
iirc the psp 1000 has a IR sensor on the top that is unused (except for some homebrew applications) and the IR port is roughly the same shape and size of a usb-c port. Might be a good alternative location.
That's one place I also think would be great for someone who has no use for the IR.
Its almost perfect
@@TotalKommando Lots of modders use it for a HDMI out mod though now that i think of it. that poor IR sensor port gets used for just about everything except IR applications XD
@@aka-chi_hurron Yea I have yet to cover the HDMI mod, i kinda dont like it but will cover it in depth once i get to it, too many downsides for me
@TotalKommando yeah, with the video out on the 2000 and 3000 it's not all that required. Though I can see why some would want to implement a video out on the 1000, and the placement of the cable is a far improvement in the mod over the official one, comfort wise at least.
I look forward to your video covering it as I am curious what aspects you dislike about the mod.
Waiting for the upcoming video with a USB-C port o PSP incorporating more functions as you said in this video.
In the end, you left the original charging port not connected, right?
Yea cant wait to get into that project, in the end of the video for the "Solderless" method I did leave the charging port not connected, but since then the psp is left in parts.
Once I do it again, I plan to keep the original charging port function as I still want it to work like stock on old accessories : )
I want to add function, not remove as much as possible
Well you can use the ribbon cable to connect usb c to barrel plug
Or salvage some old wireless card antenna wire cable from an old laptop.
True thats also an option, extra wire to run back down
Could this be done with a 3000 model instead of the 1000? Thanks!
I will attempt it in a future video
@@TotalKommando thank you very much!
This is great, and this tutorial can be used for the other models as well right? since the charging port is the same no matter the model.
Yea you can adapt the methods learned here to use on other models.
The only thing you will have to figure out is where to exactly cut to end with a clean result.
I will have shorter quick videos for other models once I do them.
Brother can you tell me where I get psp street glass lens.. AliExpress have only 1000-3000 model. There is no psp street glass...so where I get it.. please send me a link .
I used the same lens for my street model from the 1000-3000 link is in my glass lens video
@@TotalKommando Oh I see...but I saw in your video the street glass was cutted tow times. where psp 3000 model glass are not same..will 3000 glass fit on street model.?
It is possible to do same in PSP 2000 and 3000 models?? How???
Will cover this in a future video
@@TotalKommando will be waiting :)
I wish this could work for the PS Vita
It definitely doesn't seem like a beginner's solution,
you should try a USB C PD to Power Connector Universal, and you would have the same result
Yea ended up being more complicated than expected lol
You could get the little adapter but you will have to remember to take it with you at all times, could be lost
I may give the side USB idea another attempt for the sake of simplicity, but its placement is not optimal.
@@TotalKommando would love to see you take another shot at this, considering doing the mod myself
this mod look cool! is there any way to put the USB-C Port on the charging port part?
I mention in this video, my goal is to keep original function, but yes you can do it, I just don't like how it looks and requires heavy modification to the case.
You can use what you learn in this video to do it anywhere else you want.
Yes, you can do this too (you can even find a video on this modification on UA-cam), but it doesn’t look very good. Therefore, the option in this video is one of the most optimal
can you try doing the type C mod on the psp go ?
Eventually I will have a video on that
It’s working perfectly?
Is this mod available for psp 2000 or 3000s?
Video for those coming later, how keen are you on the whole "solderless method"
@@TotalKommando somewhat interested
personally I’m hella interested in the nonsolder option
Do you offer a modding service we can mail to?
Sadly no, I just teach here : )
The Solution is looking for a Problem 😂😂, man i really appreciate you trying it but that original charging port is already 360 Rotatable , much reliable than 2 sided usb C,
Yea I know lol, personally I dont mind the OG port at all lol
i want vita type c mod
Will make it happen once Im done with PSP mods
Way more complicated than it needs to be with that you've done just for charging a psp with usb c. People are going to destroy their psp like the way you've done. I wouldn't recommend following this. 😢
ain't no way 😭
ya-uh
Apa la kua 💀
"looks nice", and not straight and cracked
This is so dang janky.
stop using your teeth for stripping the wires, i have fucked my front teeth up significantly doing it too much.
I agree, terrible way to do it but I do it occasionally, and only with soft easy wires.