The LS swapped S10 is "done"! First Start, drive, alignment, ship it!
Вставка
- Опубліковано 18 тра 2023
- It's a long time coming but this little LS swapped S10 project is finally going away! Is it done? No, not really. But at least OUR portion of this project truck is done and Randy can have it back for his part. A big part what we do is getting projects over a hurdle, or two or three and giving the vehicle back to move forward. Those hurdles are what can totally derail a project!
So as you all saw in the last video with this truck, it just flat out refused to start. It would cough and spit and sputter but would only roar to life being bottle fed. Out of time? Missing Spark? Starved for fuel? Well let's find out!
Huge thanks to Randy for bringing us his baby and trusting us to get it right for him. We are all excited to see what you and your daughter do with it from here! - Авто та транспорт
...nice finish - great to see in pull away from the shop with a smile on the customer's face !...
Man it feels good to wrap one up like this and send it out the door. Very excited and honored to be a part of this build, you can tell Randy is excited to have it back!
Cool 😎 . Let’s go !
It's finally going! Finally! 😀
Great job as always Rich!!
Thanks Billy! She had some challenges for us but one at a time we got 'em done!
It is a sweet looking truck and it sounds like the timing is off a little bit and good luck and be safe and God bless you guys
Oh it needs timing and carb work for sure but that wasn't our department 😀 It's running driving turning and stopping up to Randy to do the rest!
HELL YEAH BROTHER
Another win for the boys in blue! 😀
A little project always gets bigger when it's a Frankenstein LOL
Ain't THAT the truth? Little fix here, little tweak there, maybe a little change over... awww hell we're rebuilding half the truck! 😞
ALL race cars/trucks are Frankensteins, hopefully whoever built them knew what they were doing. It's not like there isn't a ton of information out there about how to do it.
if ur fuel is a mix of ethanol and anything it can seperate out so the ethanol i think ends up on the bottom . its not always a contaminant when u can see lines in fuel anymore , and it can b quite difficult to get it to mix back together . if u can find one they used to make feul funnels with a fine copper mesh in them that seperated out the water for u to pour away as the molocules r much larger than petrol or gasoline
Nice work
Took a whoooollllle lot of doing but it's a another win in the end! 👍
Another excellent job lucore auto thats 💯 the guy is all smiles....🙂👍🙏
That's what it's all about! Getting our part done to hand it back to the customer so they can enjoy it. Randy has been looking forward to this for a long LONG time!
cool
Thanks Michael, such a load off our shoulders to see this thing FINALLY under it's own power and going away!
My battery and fuel cell are under a tonneau cover. Though it never rains in Phoenix, AZ. That's a GMC grille, and what are those ugly things stuck around the door windows? I don't run E85. It's a nightmare on fuel systems. I use VP C10. Race cars break. Yes they do. As long as they don't hit the wall or roll over when they break I consider that normal.
At 27 minutes crank timing off kicking starter. Much better now. 😊
Love the content guys
Thanks Daniel! We know it's more work content than entertainment content but we appreciate you all sticking with us!
@@LucoreAuto it’s what you guys do so keep up the good work guys the alignment videos help anyone trying to set up a hot rod at least let’s them know what to tell the shop to align there vehicle to
Water does that because it is partial polar. The hydrogens attract to the oxygens. So imagine really weak magnets attaching to each other. While gasoline is non polar mostly “save for ethanol” they lay down and spread out because they are not attracted to themselves. That is why gasoline is great to clean a grease shop floor.
You didn't look billies when was at your his is covered for 2 reasons keep the water out the fuel cell and arrow dynamics
Is that a '67-ish Chevelle (a-body in general) master cylinder? Good job on the little budget project!
Hmmmm good question will have to go back and check but it likely is. There's a lot of different pieces on this truck to make it work 😀 Little project grew in scope a bit on us but ended up getting quite a lot done!
What bump steer kit would you recommend for a 71 Nova?
That truck has been a pain in your ass since Day 1
It hasn't been easy that's for sure, lots of little challenges add up! But really isn't that how it goes for most of us? And how a lot of projects end up sitting dead garages? Just gotta keep after it!
Curious what master you ended up using?
Have you had anyone bring you a Colorado/canyon with crown vic spindle swap to align yet?
No but that sounds interesting! We actually have a potential Canyon project in the pipeline for next year..
You guys didn't know that about those caps on fuel cells?
Is that the food truck still sitting there ??
Ugh don't bring it up! That thing REFUSES to leave!
Can you ship to Canada?
Haven't opened up that possibility yet but can certainly look into it!
Did Billy run yet ?
🤣
Jeez, some of you guys really know how to run someone else's never funny joke into the ground! I think we're working on a year and a half now.! Now, do something meaningful and constructive like harass Billy about hookin up with that country chick!!!lol😂
For real, wasn't trying to be combative towards you, just being dumb..
Last I saw was Billy running a 3 cylinder Crown Vic 😉 It didn't go great!
What's the compression on that?????
Stock compression LS and carb work are needed 😀
😎💯👍
Always appreciate the support! Great to see this little truck going away too!
Need to lose the chrome fender lips on that truck
👍🏽🇺🇸👍🏽
HOWdy LUCORE,
Thanks
Be sure to NOTIFY us when the "PULL-OVER" HOODIES are available ( instead of the ZIP-UP items) in 2XX ( 2XL ) CHURCH Sweatshirts
COOP
the WiSeNhEiMeR from Richmond, INDIANA
...
That starter or timing is atrocious
Timing may be a WEEEE bit off 😉