LS S10 Swap Headers & Dirty Dingo PS/ALT Bracket Installed!
Вставка
- Опубліковано 4 чер 2023
- Be sure and show some #dbfam love to fabBot for taking care of us!
Be sure and let them know you're #dbfam if there's anything they can help you with!
Visit FabBots website 👇
www.fabbotfab.com/
FabBot on Instagram
fabbotfab?igshi...
FabBot LS into Colorado mounts we're using.
www.fabbotfab.com/products/fa...
FabBot adapter plate bundle we're using
www.fabbotfab.com/products/fa...
FabBot Power steering adapter kit we're using.
www.fabbotfab.com/products/07...
in today's video we install the 5.3 l third generation LS out of a 2001 Chevy Tahoe into my son's 2007 Chevy Colorado. huge thanks to Fabbot for the conversion kit! The AR5 to LS transmission adapter made things super simple! especially bolting the LS into the Colorado using the fabbot LS conversion mounts made it seem like it belong there, we also don't have to go through the hassle of figuring out how to run the power steering lines thanks to the Fabbot power steering conversion kit. just about everything was a direct bolt in, only thing that had to be trimmed was the engine cradle to clear the LS into Colorado conversion mounts. LS swapping made simple! thanks once again to Fabbot. highly recommend using their products in the links above for any of your LS into Colorado / canyon needs!
Want to help with the builds?? Follow the links below!
Become a Patreon here
www.patreon.com/user?u=22862832
Buy merch here
deadbeatgarage.myshopify.com/
Send Me Stuff Here
Bravus Jeffries
P.O. Box 23398
Phoenix AZ 85063
Follow me on social media
Facebook
UA-camdeadb...
Instagram
deadbeat_ga...
Built Not Bought group on Facebook (fixed the link)
/ 768216480031651
Thank you all for the love and support you have shown, it is greatly appreciated!
Check out all the links below! Help support the companies that support the channel! #dbfam
MPC Motorsport website! Full of badassery!!
www.mpcmotorsport.com/
MPC Motorsport on Instagram
mpcmotorspo...
Looking for some custom fabrication!? Get ahold of Sic Industries, LLC.
Facebook
/ sic-industries-llc-529...
Email
sicindusrties@hotmail.com
Visit Finish Line Factory for all of your AN line needs!!
Finish Line Factory Website
finishlinefactory.com/
Enter "deadbeatgarage" at checkout to receive 10% OFF!!
Finish Line on Instagram
finishlinef...
Finish Line on Facebook
/ finishlinefactory - Авто та транспорт
THE GREEN HOLES ARE NOT FOR A COOLER THEY DO NOT HAVE FLUID RUNNING THROUGH THEM THEY ARE FOR AN FACTORY BRACKET THAT SECURES THE PUMP TO THE ENGINE BLOCK
Every channel on UA-cam has things that set them apart I really enjoy your content because of the amount of effort you put into detail when doing projects
Roughly 6 months ago bro you were debating which direction to move now we’re (I say we’re cause we are the DBFam) watching you build trucks and cars making moves. Proud of you brother and keeping like addicts on videos. You build and upload and we’ll keep supporting how we can.
😌🤙🏼 anit nothing like a deadbeatgarage video in a Monday afternoon after work 😏👌🏽 #dbfam
Amazing video, as always!! Keep up the great work, but let's remember the real problem here!
The fact that Hector is gonna be running three Honda Civics with Spoon engines. On top of that, he just came into Harry'sm and ordered three T66 turbos with NOS and a Motec system exhaust.
Shitz so played out... Be original
Such a sweet clean build man. Truck is going to be badass
Speedway has some cool Power Steering Caps.
I'm loving the build. 👍
Always perfect timing 😮⁹
I spent all weekend waiting for this vid to drop. This channel never disappoints
Ready for the cheat code, u can use hydraulic jic fittings on AN fitting jic has many adapters shorter than AN and they are rated to much higher psi. I use them on my car no leak anywhere
I'ma look into this. Probably would have helped me today with the power steering lines 🤣😫👈
There are special large head bolts that go in the holes that simply retain the can to the pump. They have to be 18m headed x 10m/1.5 I think in order to compress the o-ring between the can and the pump body to seal. There is a small Dia. vac. booster for some models of those trucks that you will most likely need to clear the valve covers.
If you wanna know a trick for future broken exhaust bolt extraction weld that bead on there first like you did then the nut and get on it with a wrench for pressure and gently put an air hammer on the center of the bead and hit it with the air hammer while turning it works everytime if you got one thats really stuck
Nice 👍🏽 I have a built 6.0 4l80 swap in line running Holley dirty dingo mounts trans brackets powered by Holley
Dope build 💪
for power steering cooler just buy a 07 - 09 chevy trailblazer one its small and cost something like 30 bucks 🤘 love the build and keep those vids coming✌
badass bro!
Dirty dingo shit is dope
Yea what he said.(about the holes ( little short bolts)
Sick bro sick
I'm surprised you didn't use truck accessories. They fit perfect on a s10 and cheap or free if you have a truck engine.
#dbfam strong 🤙🤘
Oh yeah buddy 🎉🎉
O snap we gonna start calling u LS daddy 😅.. peace and love brotha keep it rad stay safe and build on l8z #DBFamStrong #BuiltNotBought #WhoopWhoop
OCD killing me bro, watching does brake line with purple paint 😂😂😂❤❤❤ love the content
Let's Go 💪🏼💯
the 2 green holes are for the bolts that hold the res to the pump you need them or it will leak
🔥🔥🔥🔥🔥
Good work . 100
Them 2 caps are for factory bracket.
Early 😎. Hammer is friend when it comes to firewall clearance 😅
Im aswell doing a ls swap. But in a g body Montecarlo
There needs to be bolts in there to hold the reservoir to the actual pump. Without bolts it will leak.
Yea mon
Hell yeah perfect timing on the video drop! Let's go!!
Next time take and weld a flat washer to the broken bolt then weld the nut to the washer. Works way better tha just welding the nut on it.
Think ya could do a write up on the AN fittings you used to convert. Could use that info
🍿
👍👍from this guy
whats the temp rating on that thread sealant? Teflon tape goes up to 550
you should of went witth the arp ls exhaust bolts never have to worry about them brakeing in the head
I work at an engine machine shop and I feel your pain on that broken bolt
Lessss gooo.
Make sure to put heat wrap around the spark plug wires bro. They will melt
gotta paint that gearbox
Did the steering shaft end up clearing the headers well? just curious. I got the same headers and steering shaft. just wondering what i'm going to run into. also what engine mounts did you end up running and what oil pan? thanks
Hey bro nice work! What size spark plug wires did you choose from speed engineering. The offer 10 or 12 inch. ? Thank u.
Think gonna need to use the 🔨 for modifications 🤔
Are the new engine mounts going to affect the clearance with the notch you made in the K member ???
great video today bro lots of shit finished and you said the correct engine mounts were taller holly chit man your gonna have to remove your brake booster which might be the way to go on this unit
😂😂 label B B C meaning BumBoClaat 😅😂🇯🇲💯👍
What episode is the fuel system done in 😂asking for a friend
Pull the green plugs out make sure it’s not oem mounting
I wanna say factory bracket bolts back there
Headed to Phoenix in 3 weeks...do you recommend anyplace worth checking for truck sales?
3:52 boi your job is to make videos for me to watch ! Go to the yard and save the 120 ! 120 for a turbo Ababay
Hell yea bbc lol😂
What's the part number for the -6an fittings
Brakes booster
I enjoyed today's video, as always, but I thought we were going to hear Bravens LS roar for "Mondays video" 😢
When are you planning on LS swapping a civic sedan with a tub’d rear, slicks, and a wheelie bar? 😂😂😂
LS noob here . How can you tell the difference from 5.3/4.8 if your buying off the street ?
Use washer before you weld
Yo those little plastic caps on the back of the pump need to be bolts
#dbfam
My brother I wish you would go electric power steering.
Damg man if u was gokng to detail the engine u shouldve done a full engine rebuild and cleaning
BBC!!!!!!!!😂😂😂😂😂
money shot 8:35
Installing the pully on the power steering pump with a hammer is a big no no.
they give you nuts with your B,B, and Cs?!
🤣🤣🤣
BBC FAM 🤣🤣🤣
Why not try stock truck accessories drive save money!
dude you have one hell of a cave hanger you need removed !
BBC. 😅😅😅😅😅😅😅
First half is repeat of Saturday. Come on. You have plenty of stuff there for contact without repeating the vid
Chill it’s a stock 5.3 my 98 Camry faster