fancierstudio power Heat Press Setup
Вставка
- Опубліковано 4 тра 2019
- Unboxing of Fancierstudio power heat press. What have here is the user manual and this is the Teflon sheet. There you go. Once unbox machine always leave heat platen unclamp when setting temperature and time. Turn on machine. Press “Temp” button once then use “up/down” button to select desire temperature press “Temp” button one more time to confirm.. To set time press “ TIME” button once then use “ up/down” button to select time in seconds and press “ Time” button one more to confirm. Once heat press is clamp down the timer will count down and alarm will go off. For initial setup we recommend setting temperature at 350F leave it on for 45min to 1hour for initial burn off. Once timer reaches 0 the alarm will go off on machine. If you still have questions can contact us at 415-325-5598 between hours of 8am-4pm pacific standard time Monday-Friday. Or email us fancierstudio@yahoo.com Thank you
For those who never got their questions answered you leave it open for initial burn off
What is that, please?
@@PSALMSOFSONGS One time thing you do so you won't have to deal with the chemical/smoke smell every time you use your heat press.
Mine will turn on, but will not respond to any pushing of the buttons. Any ideas for what’s going on?
Love Mine!
I know it's a year late but those who are wondering the answer is you leave it open for initial burn off, set 45min - 1Hr on your phone timer etc. you start smelling the chemical as it burns off.
How do you adjust the working temp on the FS 15x15 BB? It is 40 degrees off. It reads 305 degrees, but when I put a surface probe on it reads 265.
For initial burn... heat press open or closed? I set the temperature at 350, but I cannot set the timer for 3600 seconds b/c it’s only 3 digits. If I close it on zero seconds, it beeps obnoxiously the entire time.
Anyone know how to tighten the base? It’s loose and wobbly.
How do you use the white sheet they sent with the machine?😊
How you set up the 45 minutes for burn off?
Mine will turn on, but will not respond to any pushing of the buttons. Any ideas for what’s going on?
mine turned off after 3 min and now won’t turn on. any suggestions? How do you check the fuse?
I just bought one it will be here this week. Does it have an attachment for hats???
No it don’t
How do you put the teflon sheet on?
Just unboxed mine but it’s not clamping shut. How do I fix this?
Just got mine and I have the same problem. Did you ever figure it out?
I just got this heat press. So 45 minute initial burnoff?
did you really do the initial burn off?
Do we leave it open or closed for the initial burn off
Does it have to be open or closed for the burn off?
Leave the heat press open, do not close it during this entire procedure. Allow the heat press to heat up - you will likely smell the chemicals or oils beginning to burn-off, along with a bit of smoke. Leave the machine on and allow the burn-off to go on for 30 minutes. This is to burn off all the chemicals away and breaking in the heat press.
Mines won’t stop beeping. What should I do??
Hi, I was wondering if you could tell me how you got your heat press to stop beeping? I’m trying to figure this out. I got it up to the correct temp but when I close it it just keeps beeping. Could you help me please?
How can I make mine lock? I can’t figure it out.
My fancierstudio 15x15 keeps sounding an alarm. My temp board looks different it is only 4 months old
Mine keeps on beeping and I don’t know why. Did you figure how to fix the beeping?
@@kdm5706 did you ever figure out why it keeps beeping I’m having this issue right now could use some support on how to stop it from beeping
@@deewolfe2937 I ordered a new interface, it's the thingy with all the buttons on the heat press. I ordered it on Amazon and replaced it and it stopped beeping.
@@deewolfe2937 I had to replace the controller on the heat press. I ordered it on amazon. it cost like $30. it's called the Fancierstudio Heat Press Replacement Temperature Controller Fancierstudio Power Heat Press Temperature Controller 15x15.
Price
how does it lock down?
if yours is not locking down turn the knob up to to the right slowly little by little check to see when it locks..it may be turned to the left too far.
@@TeresaWilliams-xn5gx Thank You this is what I did and fixed it. Thanks for your response.
Where is the fuse mine all of a sudden won’t come on