Heat press won’t turn on FIX!
Вставка
- Опубліковано 8 вер 2024
- I hope this helps someone out there! These things are not cheap but, the fix is!!
Tools
Multimeter/low voltage meter - amzn.to/2SjL15j
Magnetic Pan (to hold your screws) - amzn.to/2OLCrvh
I also used a drill but, you can use a regular screw driver as well.
Parts
Fuse holder - amzn.to/3be8Sf7
Fuses (the right ones) - amzn.to/2umUII8
Interested in getting a Glowforge? Click the link below to get $100, $250, or even $500 off!!
glowforge.us/r...
Thank you….I have this illumapress xmtg-3000 that wouldn’t turn on. I couldn’t find any info on it and thanks to you I was able to at least figure out how to change the fuse…and now I’m back in business! Thank you
Thank You for you posting this. Motivation for me to fix my heat press✨
This was really helpful! I think this is what is wrong with mine! I’m hoping so. My fuse went all the way through the back and fell inside so I’m pretty sure it is. Ordered the parts you recommended
any idea where the fuse wire goes to? There is very little information out there.
Awesome 👍 thanks for the video
Everyone mentions changing the fuse but first try the reset button. Mine does not have a reset button and I can't find a fuse. I have taken it apart and still no fuse. There is a mother board in mine. The ones I look at have the fuse access from the outside of the machine so I don't think mine actually has a fuse. But I am electronically challenged. Thanks for the video though. It seems helpful to a lot of people.
hello is there anyway you could send me a wiring diagram of how this is all supposed to be wired up? the number 3 wire on the control box I can't figure out where hooks up to
Were you ever able to resolve the wiring issue? My #4 wire has burnt out and I need to know where to get the part. Any help is appreciated.
Very Helpful.
Hello I have 2 heat press machines that are not working I can fix my 15x15 by simply replacing the AC power cord male socket/inlet.
My other one which is a 16x20 is a whole other story. The model # YF-03 YF-08 YF-10 YF-14 YF-29 YF-34 YF -46. I thought ot was the fuse but actually the top wire on the fuse housing burned off. Is there anything you can recommend or possibly show me the a wiring diagram
What size fuse
I always take a picture of how the wires go into the switch. But anyway what keeps happening to me on a very similar press is the switch keeps going bad I think I am on my fifth switch. When I bought it two of the wires were soldered into the switch so I had to deal with that but now after I press about five or six shirts the switch goes bad again so I have to keep buying switches. I have been told that the switches can't handle the amount of Watts or power that is coming through it but anyway for now I have to deal with it and I'm thinking about just buying a better press. I had another switch go bad again tonight and I can see where it's getting fried on one of the prongs I just keep buying the switches ahead of time so I have them on hand. Again I think I'm just going to buy a better quality press
What makes the heat press hum when it gets warmer?
My heat press machine is not working then what to do
Which heat press is this and what size? Thanks for this video.
I just saw your comment now I’m really sorry for the delayed response! The model number on this machine is HPM-1515 which is 15X15.
Where are you located?? Im having the same issue
So I have a off branded heat press, does it matter what fuse I use ?
I’m sure it does. You will have to look up fuses for your specific model.
My blue cord melted; power won't switch on; can you help me find the cord or parts I need please 🙏🏽🙏🏽🙏🏽
Hey so I think I have the same problem but I replaced it and it turns on for a couple secs and blows the fuse again.. i got 5amp fuse because apparently that's what was in there already? But the ones I got (not the ones you linked) keep blowing. So my question is what is the correct fuse? The ones in the link u provided say .5amp? Thank you
Hey Gabriel! The correct fuses to use for the machine in this video is 15A. It is 1800 watts. For some reason the link brings you to the .5A automatically instead of the 15A. You can send me your model number and I make sure you get the correct fuse if you’d like?
@@brokefix-it276 Where are you located?? Im having the same issue
Does that fuse work on all heat presses? I have a small one 12x15
I’m not sure if it’s the same across the board but, if you provide the model #, I’d be happy to help!
What size fuse is correct
0.23 x 1.18 inch / 6 x 30 mm. 15 Amp
How to change fuse
My heatpress works while switching on but when i press t-shirts the power goes off .. please help 🙏
Please help mine stop working the power button comes on but the screen doesn’t .
I need help I forgot where the wires go. It’s 3 blue wires
I’ve had issues with on of switch. They last about a year or so. They burn out, 5
$5 for a new one.
My heat press machine is not on .please tell me solution
So I hope I can get help. I have a 1500W Calm shell. It’s not the fuse all it did was flick on and off and then just stopped heating.
My wife actually got a new heat press because the screen went out and I couldn’t find a new one anywhere! Then the new machine went out… 🤦🏼♂️ However, it was just the switch. I replaced it and all is good again. That could be your issue?
Help! I don't what to do with my heatpress? Any suggestions, video on my channel. Thanks.
Not to be a Karen bro, but I'm surprised you use a multi-meter and yet make statements like "make sure you know which cord goes where" referring to the two wires for the fuse holder. Seriously? It does not matter. It's a fuse holder. It is no different than just connecting the two wires to each other as far as current is concerned. Also, a loose cap will not cause the fuse to blow. It would simply cause a break in the circuit as if the fuse was blown or missing. I'm going to assume you don't know how electricity works. Well, at least you are not afraid to get in there and fix the thing. Kudos.
These cheap heat presses draw a lot of current and cause these wires to get hot. Thus, melted wires and/or fuse holder. You may end up Higher gauge wire along with soldered connectors could help minimize this. Keep press on a dedicated 15 or higher amp service also. Have fun!
This is my problem .....
Problem is mine doesn’t have a fuse, and it’s doing the same thing your wife was doing!
This was really helpful! I think this is what is wrong with mine! I’m hoping so. My fuse went all the way through the back and fell inside so I’m pretty sure it is. Ordered the parts you recommended!
Sounds like it! I’m glad I could help! Good luck! 🙂
Just responding for anyone else who comes here, but I was able to contact Power Press and they agreed to send the parts given my press was still fairly new. I still purchased parts in case it ever happens again, but just an FYI if this is what happened to yours as well. It is definitely what happened to mine!
Thanks for that info!!
One final update: the parts listed have been changed on Amazon. The new fuse holders listed at that link do not fit the wires connections. 😢 I attempted to change out the fuse holder using the ones linked, and they do not look like the ones used in the video. I will have to wait for the parts from Power Press.